Search Results (9)

We have developed mold matrices that can be employed to distinguish between enantiomers (D- and L-glucose) and structural isomers (n- and iso-stearic acid) in matrix-assisted laser desorption/ionization mass spectrometry. Utilizing a temperature-responsive polymer, a molecular structure recognition film was created around metal or semiconductor particles, such as silver (Ag) or cadmium telluride (CdTe), forming the core. Molecules that fit the template structure were selectively ionized. To elucidate the properties of the mold matrix, the relationship between molecular recognition rate and peak intensity of analyte ion was investigated by varying polymer film thickness around the core. The relationship between molecular recognition rate and hydrophobicity of the template molecule was also examined. It was found that increasing the amount of polymer forming the molecular recognition film improved the molecular recognition rate. However, the peak intensity of the analyte ion decreased. It was also found that using highly hydrophobic molecules as template molecules resulted in high molecular recognition rates. In addition, a water-splitting photocatalyst was synthesized and utilized to fabricate the mold matrix. It was applicable to both positive and negative ion generation while recognizing the molecular structure of the analyte. Full article

Due to higher molecular density, lower ionization potential, and a better self-healing property compared with gases, liquid targets have been used for laser-induced terahertz generation for many years. In this work, a liquid target used for terahertz radiation is embedded with silver nanoparticles (Ag NPs), which makes the material have both the fluidity of liquids and conductivity of metals. Meanwhile, the experimental setup is easier to implement than that of liquid metals. Polyvinyl alcohol (PVA) is used as a stabilizing agent to avoid precipitation formation. It is observed that the power of 0.5 THz radiation from the Ag NP suspension is five times stronger than that from liquid water in identical experimental conditions. In addition, the reusability of the material is investigated using multiple excitations. UV–visible spectroscopy and TEM imaging are carried out to analyze the target material after each excitation. As a result, quasispherical Ag NP suspensions show good reusability for several excitations and only a decrease in particle concentration is observed. By contrast, the chain-like Ag NP suspension shows poor stability due to PVA damage caused by intense laser pulses, so it cannot be used in a recyclable manner. Full article

Ag nanomaterials are promising candidates for the discovery of next-generation antibiotics with a high antibacterial effect against multi-drug resistant strains. This paper reports a simple synthesis of novel water-soluble glutathione-capped silver nanoclusters (GSH-Ag NCs) with an enhanced antibacterial activity. According to thin layer chromatography (TLC), the synthesized GSH-Ag NCs are an individual fraction of the same composition without any impurities. According to matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) and energy dispersive X-ray (EDX) analyses, the silver core of the GSH-Ag NCs contains approximately 35 silver atoms, and the molecular weight of these nanoclusters is about 11 kDa. The fabricated silver nanoclusters have a reddish fluorescence (λex/λem = 509/645 nm), with a large Stokes shift (>130 nm), and ultra-small size (less than 2 nm) according to transmission electron microscopy (TEM) data and dynamic light scattering (DLS) analysis. The antibacterial activity and minimal inhibitory concentrations of the silver nanoclusters towards Escherichia coli, Staphylococcus aureus, Bacillus cereus and Enterobacter cloacae were evaluated using the agar well-diffusion method and resazurin metabolism assay. The antibacterial activity of chelated silver in the nanoclusters was found to be significantly higher compared to the activity of free silver ions. To explain the possible mechanisms underlying the antibacterial actions of the GSH-Ag nanoclusters, molecular docking was performed, and prospective bacterial targets were identified using AutoDock. Full article

In the present study, tap water, alkaline electrolyzed water (AlEW) and tourmaline water (TMW) were used as the electrolytes to generated the silver-ionized water (SIW), AlEW-SIW and TMW-SIW, respectively. The antioxidant properties of the samples containing ascorbic acid (AsA) were investigated by WST-kit method. The results showed that the SOD activity of AsA (2 mmol/L) dissolved in SIW (66.0%) was enhanced by about 8% compared to that of the tap water (57.9%). The SOD activity of the AlEW-SIW solution (77.3%), which was higher than that of the SIW solution, and lower than that of the AlEW solution (83.6%). The SOD activity of the TMW-SIW solution (83.0%) was similar to that of the TMW solution (82.5%). Furthermore, to classify the sample solutions, discriminant analyses were performed based on near infrared (NIR) spectral data, which was consistent with the results of the WST-kit method. The SOD activity of the AlEW-SIW and TMW-SIW solutions decreased slowly with storage time, and their SOD activities were higher than that of AlEW, TMW and the tap water solutions at storage time of 14 days. In summary, AlEW-SIW and TMW-SIW showed similar antioxidant activity enhancement as AlEW and TMW, and they also maintained the stability of the antioxidant activity of AsA during storage. Full article

Implant-associated infection due to biofilm formation is a growing problem. Given that silver nanoparticles (Ag-NPs) have shown antibacterial effects, our goal is to study their effect against multispecies biofilm involved in the development of peri-implantitis. To this purpose, Ag-NPs were synthesized by laser ablation in de-ionized water using two different lasers, leading to the production of colloidal suspensions. Subsequently, part of each suspension was subjected to irradiation one and three times with the same laser source with which it was obtained. Ag-NPs were immobilized on the surface of titanium discs and the resultant materials were compared with unmodified titanium coupons. Nanoparticles were physico-chemically analysed to determine their shape, crystallinity, chemical composition, and mean diameter. The materials were incubated for 90 min or 48 h, to evaluate bacterial adhesion or biofilm formation respectively with Staphylococcus aureus or oral mixed bacterial flora composed of Streptococcus oralis, Actinomyces naeslundii, Veionella dispar, and Porphyromonas gingivalis. Ag-NPs help prevent the formation of biofilms both by S. aureus and by mixed oral bacterial flora. Nanoparticles re-irradiated three times showed the biggest antimicrobial effects. Modifying dental implants in this way could prevent the development of peri-implantitis. Full article

Mass spectrometric techniques can provide data on the composition of a studied sample, utilizing both targeted and untargeted approaches to solve various research problems. Analysis of compounds in the low mass range has practical implications in many areas of research and industry. Laser desorption ionization techniques are utilized for the analysis of molecules in a low mass region using low sample volume, providing high sensitivity with low chemical background. The fabrication of substrates based on nanostructures to assist ionization with well-controlled morphology may improve LDI-MS efficiency for silver nanoparticles with plasmonic properties. In this work, we report an approach for the preparation of silver nanostructured substrates applied as laser desorption ionization (LDI) plates, using the chemical vapor deposition (CVD) technique. Depending on the mass of used CVD precursor, the approach allowed the synthesis of LDI plates with tunable sensitivity for various low molecular weight compounds in both ion-positive and ion-negative modes. Reduced chemical background and sensitivity to small biomolecules of various classes (fatty acids, amino acids and water-soluble metabolites) at nanomolar and picomolar detection levels for lipids such as triacylglycerols, phosphatidylethanolamines and lyso-phosphatidylcholines represent an emerging perspective for applications of LDI-MS plates for the collection of molecular profiles and targeted analysis of low molecular weight compounds for various purposes. Full article

This review discusses Legionella, among the most prolific and publicly well-known waterborne pathogens, and advances in potential treatment technologies. The number of cases associated with Legionella continues to rise, as does its public awareness. Currently, cases associated with premise plumbing account for the largest number of legionellosis cases in the United States. So, while it is important to understand Legionella as such, it is also important to investigate how to treat drinking water in premise plumbing for Legionella and other waterborne pathogens. While there are currently several methods recognized as potential means of inactivating waterborne pathogens, several shortcomings continue to plague its implementation. These methods are generally of two types. Firstly, there are chemical treatments such as chlorine, chlorine dioxide, monochloramine, ozone, and copper-silver ionization. Secondly, there are physical treatments such as thermal inactivation and media filtration. Their shortcomings range from being labor-intensive and costly to having negative health effects if not properly operated. Recently developed technologies including ultraviolet (UV) irradiation using light emitting diodes (LEDs) and innovative carbon nanotube (CNT) filters can better control waterborne pathogens by allowing for the simultaneous use of different treatment measures in plumbing systems. Full article

An electrochemical sensor was fabricated on a flexible polyethylene terephthalate (PET) substrate for the detection of cadmium sulfide (CdS), a heavy metal compound. The sensor consists of a working and reference electrode that were gravure printed using silver (Ag) ink on the PET substrate. The performance of the sensor was investigated by measuring electrical impedance spectroscopy (EIS) for varying concentrations of the CdS. From the EIS based response, an impedance change of 11 ± 1%, 23 ± 1%, 34 ± 2% and 50 ± 3% was observed for the 1 pM, 1 nM, 1 µM and 1 mM concentrations of CdS, respectively when compared to de-ionized (DI) water, thus demonstrating the potential of employing gravure printed electrochemical sensors for heavy metal detection applications. Full article

Industrial pollution by heavy metal ions such as Hg²⁺ and Ag⁺ is a universal problem owing to the toxicity of heavy metals. In this study, a novel nano-adsorbent, i.e., poly-2-mercapto-1,3,4-thiadiazole (PTT), was synthesized and used to selectively adsorb mercury and silver ions from aqueous solutions. PTT nanoparticles were synthesized via chemical oxidative dehydrogenation polymerization under mild conditions. Oxidant species, medium, monomer concentration, oxidant/monomer molar ratio, and polymerization temperature were optimized to obtain optimum yields. The molecular structure and morphology of the nanoparticles were analyzed by ultraviolet-visible (UV-Vis), Fourier transform infrared (FT-IR), matrix-assisted laser desorption/ionization/time-of-flight (MALDI/TOF) mass and X-ray photoelectron (XPS) spectroscopies, wide-angle X-ray diffraction (WAXD), theoretical calculations and transmission electron microscopy (TEM), respectively. It was found that the polymerization of 2-mercapto-1,3,4-thiodiazole occurs through head-to-tail coupling between the S(2) and C(5) positions. The PTT nanoparticles having a peculiar synergic combination of four kinds of active groups, S–, –SH, N–N, and =N– with a small particle size of 30–200 nm exhibit ultrarapid initial adsorption rates of 1500 mg(Hg)·g⁻¹·h⁻¹ and 5364 mg(Ag)·g⁻¹·h⁻¹ and high adsorption capacities of up to 186.9 mg(Hg)·g⁻¹ and 193.1 mg(Ag)·g⁻¹, becoming ultrafast chelate nanosorbents with high adsorption capacities. Kinetic study indicates that the adsorption of Hg²⁺ and Ag⁺ follows the pseudo-second-order model, suggesting a chemical adsorption as the rate-limiting step during the adsorption process. The Hg²⁺ and Ag⁺-loaded PTT nanoparticles could be effectively regenerated with 0.1 mol·L⁻¹ EDTA or 1 mol·L⁻¹ HNO₃ without significantly losing their adsorption capacities even after five adsorption–desorption cycles. With these impressive properties, PTT nanoparticles are very promising materials in the fields of water-treatment and precious metals recovery. Full article