Search Results (59)

Sewage sludge, characterized by its high organic matter and nutrient content, as well as the presence of microbial pathogens and other contaminants, requires proper management due to its significant generation rate. The table olive sector, which is highly significant in Spain as a global leader in production and export, generates various waste streams such the Organic Solid By-Products from Table Olive Processing (OSBTOP), which are mainly derived from the olive pit after the pitting process. The main aim of this study was to enhance the methane production performance of sewage sludge through co-digestion with OSBTOP as a co-substrate. Batch assays demonstrated that employing OSBTOP as a co-substrate increased methane content by 35–41% across all tested mixtures. While the highest methane yield was produced at a 40:60 (sludge:OSBTOP) ratio, a 60:40 mixture proved to be a more advantageous option for scale-up and practical application. This is attributed to factors such as the higher availability of sludge and its inherent buffering capacity, which counteracts the accumulation of volatile fatty acids and promotes process stability, thereby contributing to the study’s objective of significantly enhancing methane production from sewage sludge through co-digestion. In semi-continuous operation, methane yields in the co-digestion scenario exceeded those of mixed sludge digestion, showing a yield of 180 versus 120 LCH₄⁻¹ · kgVS_added⁻¹, representing a 50% improvement. This study highlights the potential of anaerobic digestion as a strategy for valorizing OSBTOP, a by-product with no prior studies, while demonstrating that its co-digestion with sewage sludge enhances methane generation, offering a sustainable approach to organic waste treatment. Full article

Macro- and microelements in waste can be returned to the soil as fertilizers and their sustainable use can reduce the need to extract natural resources. For example, the use of carbonate-clay flour, sewage sludge and waste sulfate sulfur to improve soil properties enables the natural recycling of the nutrients contained in these materials. Soil physicochemical properties with the application of waste and the bioavailability of nutrients and trace elements were assessed before and after a 3-month incubation period. This study showed that when carbonate-clay flour was applied alone or together with sewage sludge and waste sulfur, it improved the properties of the soil, inducing a reduction in acidification and an increase in the content of available P, K and Mg. Sewage sludge also provided Zn, Cu, Ni and Cr in addition to organic carbon. Sulfate did not cause soil acidification. The results indicate that the use of carbonate-clay flour alone, as well as with the addition of sewage sludge and sulfate sulfur, can be recommended for the deacidification of soil and serve as a remediation tool for, for example, the precipitation of chemical pollutants. The valorization of the waste used fits into the circular economy approach. Full article

Afforestation with Pinus sylvestris var. mongolica in northern China is hindered by soil degradation. This study evaluated a ternary amendment combining sewage sludge (SS), cattle manure (CM), and maize straw (MS) to rehabilitate degraded sandy soils in the Horqin Sandy Land. Five treatments were tested: control (CK), SS (T1), SS + CM (T2), SS+MS (T3), and SS + CM + MS (T4). The ternary amendment (T4) achieved optimal outcomes: soil pH decreased from 8.02 to 7.79, organic carbon increased 2.5–fold, and total nitrogen (127%) and phosphorus (87.5%) were enhanced compared to CK. Pinus sylvestris exhibited a 65.6% greater basal diameter and 29.5% height increase under T4, while heavy metal concentrations (Cd: −54.6%, Cu: −35.1%, Pb: −12.2% and Zn: −27.6%) were reduced. These findings highlight a synergistic waste valorization strategy for dryland afforestation, balancing soil fertility improvement with ecological safety. Future studies should prioritize long-term microbial community dynamics and field-scale validation. Full article

Municipal sewage sludge, a by-product of urban wastewater treatment, is increasingly recognized to be a strategic resource rather than a disposal burden. Traditional management practices, such as landfilling, incineration, and land application, are facing growing limitations due to environmental risks, regulatory pressures, and the underuse of the sludge’s energy and nutrient potential. This review examines the evolution of sludge management, focusing on technologies that enable energy recovery and resource valorization. The transition from linear treatment systems toward integrated biorefineries is underway, combining biological, thermal, and chemical processes. Anaerobic digestion remains the most widely used energy-positive method, but it is significantly improved by processes such as thermal hydrolysis, hydrothermal carbonization, and wet oxidation. Among these, hydrothermal carbonization stands out for its scalability, energy efficiency, and phosphorus-rich hydrochar production, although implementation barriers remain. Economic feasibility is highly context-dependent, being shaped by capital costs, energy prices, product markets, and policy incentives. This review identifies key gaps, including the need for standardized treatment models, decentralized processing hubs, and safe residual management. Supportive regulation and economic instruments will be essential to facilitate widespread adoption. In conclusion, sustainable sludge management depends on modular, integrated systems that recover energy and nutrients while meeting environmental standards. A coordinated approach across technology, policy, and economics is vital to unlock the full value of this critical waste stream. Full article

The increasing production of bioplastics worldwide requires sustainable end-of-life solutions to minimize the environmental burden. Anaerobic digestion (AD) has been recognized as a potential technology for valorizing waste and producing renewable energy. However, the inherent resistance of certain bioplastics to degradation under anaerobic conditions requires specific strategies for improvement. Thus, in this review, the anaerobic biodegradability of commonly used bioplastics such as polylactic acid (PLA), polyhydroxybutyrate (PHB), polybutylene adipate-co-terephthalate (PBAT), polybutylene succinate (PBS), polycaprolactone (PCL), and starch- and cellulose-based bioplastics are critically evaluated for various operational parameters, including the temperature, particle size, inoculum-to-substrate ratio (ISR) and polymer type. Special attention is given to process optimization strategies, including pretreatment techniques (mechanical, thermal, hydrothermal, chemical and enzymatic) and co-digestion with nutrient-rich organic substrates, such as food waste and sewage sludge. The combinations of these strategies used for improving hydrolysis kinetics, increasing the methane yield and stabilizing reactor performance are described. In addition, new technologies, such as hydrothermal pretreatment and microbial electrolysis cell-assisted AD, are also considered as prospective strategies for reducing the recalcitrant nature of some bioplastics. While various strategies have enhanced anaerobic degradability, a consistent performance across bioplastic types and operational settings remains a challenge. By integrating key recent findings and limitations alongside pretreatment and co-digestion strategies, this review offers new insights to facilitate the circular use of bioplastics in solid waste management systems. Full article

Anaerobic digestion (AD) offers a sustainable solution by treating biodegradable waste while recovering bioenergy, enhancing the share of renewable energy. Thus, this study aims to investigate the AD for managing and valorizing residues from the potato chip industry: potato peel (PP), potato offcuts (OC), waste cooking oil (WCO), wastewater (WW), and sewage sludge (SS). In particular, the biochemical methane potential (BMP) of each residue, anaerobic co-digestion (AcoD), and greenhouse gas (GHG) emissions of an AD plant are assessed. WW, OC, and SS present a BMP of around 232–280 NmL_CH4/kg of volatile solids (VS). PP and WCO reach a BMP slightly lower than the former substrates (174–202 NmL_CH4/g_VS). AcoD results in methane yields between 150 and 250 NmL_CH4/g_VS. An up-scaled anaerobic digester is designed to manage 1.60 Mg/d of PP. A residence time of 12 days and a digester with 165 m³ is estimated, yielding 14 Nm³_CH4/Mg_VS/d. A simulated AD plant integrated with a combined heat and power unit results in a carbon footprint of 542 kg of CO₂-eq/Mg_db PP, primarily from biogenic GHG emissions. These findings highlight the potential of AD to generate renewable energy from potato industry residues while reducing fossil fuel-related GHG emissions and promoting resource circularity. Full article

Microalgal biomass contributes to the valorization of urban and agro-industrial solid waste via hydrothermal co-liquefaction (co-HTL) for the production of biocrude, a sustainable substitute for petroleum. Tropical and populous countries like Brazil generate a lot of agro-industrial waste, such as sugarcane bagasse and malt bagasse, as well as sludge from sewage treatment plants. Such residues are potential sources of biocrude production via thermochemical conversion. To increase biocrude productivity, microalgal biomass has been successfully used in mixing the co-HTL process feed with different residues. In addition to biocrude, co-HTL generates an aqueous phase that can be used to produce H₂ and/or electricity via microbial energy cells. In this sense, this paper aims to present the potential for generating energy from solid waste commonly generated in emerging countries such as Brazil based on a simplified scheme of a conceptual biorefinery employing algal biomass co-HTL together with sugarcane bagasse, malt bagasse, and sludge. The biorefinery model could be integrated into an ethanol production plant, a brewery, or a sewage treatment plant, aiming at the production of biocrude and H₂ and/or electricity by bioelectrochemical systems, such as microbial electrolysis cells and microbial fuel cells. Full article

This Special Issue on integrated waste management explores innovative approaches and multifaceted strategies aimed at addressing the critical challenges facing modern waste management systems. The featured eight original research articles cover diverse topics, including sewage sludge valorization, municipal waste biodrying, recyclables collection optimization, biomass-to-energy policies, and the management of compostable packaging waste. Technological advancements, such as AI-driven waste sorting and route optimization algorithms, are highlighted alongside policy frameworks supporting circular economy principles. The studies also address barriers to implementation, including public awareness gaps, technological disparities, and financial constraints, while emphasizing the importance of stakeholder collaboration across governments, industries, and communities. Additionally, environmental risks associated with waste management practices, such as nanoparticle contamination and leachate emissions from ashes, are critically analyzed. This Special Issue provides a holistic perspective on waste management, combining technical innovations, environmental stewardship, and policy integration. The insights of the works published in this Special Issue aim to guide researchers, policy-makers, and practitioners toward building resilient, sustainable, and resource-efficient waste management systems in alignment with global sustainability goals. Full article

Hydrothermal carbonization (HTC) is a promising thermochemical process to convert residues into hydrochar. While conventional HTC utilizes one type of residue as raw material only, Co-HTC generally combines two. By mixing dry and wet wastes, Co-HTC can advantageously avoid water addition. Therefore, this work investigated the potential of hydrochar derived from the Co-HTC of sawdust and non-dewatered sewage sludge as a dye (methylene blue) adsorbent and evaluated the toxicity of the resulting Co-HTC process water (PW) on Daphnia magna. Three hydrochars were produced by Co-HTC at 180, 215, and 250 °C and named H-180, H-215, and H-250, respectively. For methylene blue adsorption, H-180 and H-215 had a better performance than H-250. Both H-180 and H-215 presented a maximum adsorption capacity of approximately 70 mg·g⁻¹, which was superior compared with the adsorption of methylene blue by other hydrochars in the literature. Moreover, the removal percentage obtained with H-180 remained satisfactory even after five cycles. Regarding the toxicological assays of the PWs, raising the Co-HTC temperature increased the variety of substances in the PW composition, resulting in higher toxicity to D. magna. The EC₅₀ values of PW-180, PW-215, and PW-250 were 1.13%, 0.97%, and 0.51%, respectively. This highlights the importance of searching for the treatment and valorization of the PW. Instead of viewing this by-product as an effluent to be treated and disposed of, it is imperative to assess the potential of PWs for obtaining other higher added-value products. Full article

This paper explores the advantages of the co-pyrolysis of municipal sewage sludge with agricultural and forestry biomass, emphasizing its potential for environmental and economic benefits. Co-pyrolysis with lignocellulosic biomass significantly enhances biochar quality, reduces the heavy metal content, increases porosity, and improves nutrient retention, which are essential for soil applications. The biochar produced through co-pyrolysis demonstrates enhanced stability and a lower oxygen-to-carbon (O/C) ratio, making it more suitable for long-term carbon (C) sequestration and pollutant adsorption. Additionally, co-pyrolysis generates bio-oil and syngas with improved calorific value, contributing to renewable energy recovery from sewage sludge. This synergistic process also addresses waste management challenges by reducing harmful emissions and immobilizing heavy metals, thus mitigating the environmental risks associated with sewage sludge disposal. This paper covers key sections on the properties of waste materials, improvements in biochar quality and energy products, and the environmental benefits of co-pyrolysis, such as emissions reduction and heavy metal immobilization. The paper highlights trends and challenges in co-pyrolysis technology, aiming to optimize parameters for maximizing biochar yield and energy recovery while aligning with sustainability and circular economy goals. The paper concludes with recommendations for optimizing co-pyrolysis processes and scaling applications to support sustainable waste management. Overall, co-pyrolysis represents a sustainable approach to valorizing sewage sludge, transforming it into valuable resources while supporting environmental conservation. Full article

With the aim to establish clean and sustainable sludge treatment, green conditioning using natural flocculants has recently gained a growing interest. In this study, a variety of plant materials, namely Moringa (Moringa oleifera) seeds, Fenugreek (Trigonella foenum-graecum) seeds, Potato (Solanum tuberosum) peels, Aloe (Aloe vera) leaves, Cactus (Opuntia ficus indica) cladodes, and Phragmites (Phragmites australis) stems, were evaluated for their potential bioflocculant activity in conditioning sewage sludge. They were thoroughly characterized to determine their active flocculating compounds. Sludge dewaterability was evaluated by assessing various sludge parameters, including specific resistance to filtration (SRF), dryness of filtration cake (DC), and total suspended solid removal (TSS) from sludge filtrate. The collected results from various physicochemical characterizations of plant materials suggest that the main flocculating agents are carbohydrates in Cactus and Fenugreek and proteins in Moringa, Potato, and Phragmites. Additionally, all tested plant-based flocculants demonstrated effective dewatering performance. Interestingly, compared to the chemical flocculant polyaluminum chloride, Moringa and Cactus showed superior conditioning effects, yielding the lowest SRF values and the highest DC. As a result, the use of these natural flocculants improved sewage sludge filterability, leading to a significant removal of total suspended solids from the filtrate. The conditioning properties of Moringa and Cactus can be attributed to their high protein and sugar content, which facilitates the effective separation of bound water from solids through charge neutralization and bridging mechanisms. Thus, green conditioning using plant-based flocculants, particularly Moringa and Cactus materials, presents a promising and eco-friendly approach to enhance sewage sludge dewatering for safer disposal and valorization. Full article

In this entry, the possibility of the implementation of a biorefinery based on multiple raw materials (from agricultural wastes, vegetable oils, etc.) is covered, pointing out the available technology to interconnect different processes so that the atom economy of the process is as high as possible, reducing the environmental impact and improving the efficiency of the energy or products obtained. For this purpose, this model is based on previous works published in the literature. The role of biorefineries is becoming more and more important in the current environmental scenario, as there is a global concern about different environmental issues such as climate change due to GHG emissions, among others. In this sense, a biorefinery presents several advantages such as the use of natural raw materials or wastes, with high atom economy values (that is, all the products are valorized and not released to the environment). As a consequence, the concept of a biorefinery perfectly fits with the Sustainable Development Goals, contributing to the sustainable growth of different regions or countries, regardless of their stage of development. The aim of this entry is the proposal of a biorefinery based on multiple raw materials, using different technologies such as transesterification to produce both biodiesel and biolubricants, steam reforming to produce hydrogen from glycerol or biogas, hydrothermal carbonization of sewage sludge to produce hydrochar, etc. As a result, these technologies have potential for the possible implementation of this biorefinery at the industrial scale, with high conversion and efficiency for most processes included in this biorefinery. However, there are some challenges like the requirement of the further technological development of certain processes. In conclusion, the proposed biorefinery offers a wide range of possibilities to enhance the production of energy and materials (hydrogen, biodiesel, biolubricants, different biofuels, hydrochar, etc.) through green technologies, being an alternative for petrol-based refineries. Full article

This paper examines the properties of sewage sludge ashes (SSAs) from the incineration of sewage sludge with added limestone for toxic gas treatment. It also evaluates the potential valorization of SSA in cement composites as supplementary cementitious materials (SCMs). The work involves a thorough characterization of four SSAs, including physical, chemical, and mineralogical properties. It also includes assessing the behavior of SSA in water solution through electrical conductivity measurements. The reactivity of ashes was evaluated using the R³ method and mechanical properties. The results revealed that all SSAs present comparable mineralogical and chemical properties, with varying proportions. Major elements such as Ca, Si, Fe, P, and S are predominant in the ashes, with traces of heavy metals. In an aqueous solution, a gradual formation of ettringite was detected only for two SSA. The heavy metal leachability was negligible, confirming that SSA is a non-hazardous waste. Finally, the reactivity and strength activity index assessments revealed a low and slow reactivity of SSA compared to metakaolin or slag. The SSA that favored ettringite formation in aqueous solution presented the lowest compressive strength at 28 days after incorporation in mortar. Despite originating from different incineration sites, these ashes fall under the same category of SCM reactivity. Full article

The composting of sewage sludge (SS) with structure-forming additives is a popular and inexpensive method for the management of biodegradable waste. During this process, a number of transformations of organic matter and nutrients occur. This study presents the rates and directions of quantitative changes in Cu, Zn, and Ni during the composting of various mixtures. The following substances were used for preparing compost mixtures: SS, sawdust, straw, and bark. These substances were mixed together in appropriate proportions as follows: C1: 45% SS + 50% sawdust + 5% straw; C2: 45% SS + 50% bark+ 5% straw; and C3: 45% SS + 35% bark + 15% sawdust + 5% straw. Single (DTPA solution) and sequential extraction methods (BCR protocol) were used for microelement mobility assessment. Compost valorization was performed in each individual composting phase. The chain relative increment analysis was used for such assessment. Additionally, the potential metal pollution in the composts was evaluated by applying the following indices: the pollutant accumulation index (PAI), heavy metal enrichment index (HMEI), and heavy metal pollution load index (HMPLI). During composting, generally, the amounts of Ni, Cu, and Zn increased in the various extracted combinations, which was independent of their susceptibility to decomposition. Despite of this, the tested composts should be considered as a source of slowly available microelements for plants. The most intense quantitative changes in metals occurred in the thermophilic phase, and the weakest changes occurred in the cooling phase. At the same time, the calculated indices indicated a lack of contamination of the composts with the analyzed metals, emphasizing their environmental safety and lack of negative impact. The bulking agents used for composting with SS did not significantly influence the intensity of the quantitative changes in the tested metals. Full article

Anaerobic digestion (AD) is a promising biowaste valorization technology for sustainable energy, circular economy, local energy community growth, and supporting local authorities’ environmental goals. This paper presents a systematic review meta-analysis methodology for biomethane estimation, using over 600 values of volatile solids (VS) content and biochemical methane potential (BMP) of six different waste streams, collected from 240 scientific studies. The waste streams include cow manure (CM), sheep/goat manure (SGM), wheat straw (WS), household waste (HW), organic fraction of municipal solid waste (OFMSW), and sewage sludge (SS). The statistical analysis showed a mean VS content of 11.9% (CM), 37.3% (SGM), 83.1% (WS), 20.8% (HW), 19.4% (OFMSW), and 10.6% (SS), with BMP values of 204.6, 184.1, 305.1, 361.7, 308.3, and 273.1 L CH₄/kg VS, respectively. The case study of Kozani, Greece, demonstrated the methodology’s applicability, revealing a potential annual CH₄ production of 15,429,102 m³ (corresponding to 551 TJ of energy), with SGM, WS, and CM as key substrates. Kozani, aiming for climate neutrality by 2030, currently employs conventional waste management, like composting, while many local business residual streams remain unused. The proposed model facilitates the design and implementation of AD units for a sustainable, climate-neutral future. Full article