Search Results (111)

Background: Self-emulsifying drug delivery system (SEDDS) is widely used to improve the oral bioavailability of hydrophobic drugs. Emulsion droplet size was revealed to be a critical parameter that influences the thermodynamic stability, drug solubility, and drug absorption of the SEDDS. A high proportion of surfactant and/or co-surfactant was usually employed to reduce the particle size, which may lead the low drug loading and undesirable gastrointestinal toxicity. Methods: This manuscript proposed a novel strategy to reduce the particle size of emulsions using the hybrid of medium and long-chain triglyceride (MCT and LCT) SEDDS without promoting the concentration of surfactants and co-surfactants. The composition of SEDDS was selected based on the drug solubility. Particle size distribution and zeta potential of emulsion particles were determined using the dynamic light scattering technique. The bioavailability of formulations was evaluated in a mouse model. Results: The particle size of the emulsion was reduced from 113.50 ± 0.34 nm (MCT SEDDS) and 371.60 ± 6.90 nm (LCT SEDDS) to 21.23 ± 0.30 nm (MCT&LCT SEDDS). Progesterone, a poorly water-soluble drug, was selected as the model drug in the investigation of SEDDS. The hybrid of MCT&LCT progesterone SEDDS exhibited reduced particle size, enlarged self-emulsifying ranges, and increased drug content in the aqueous phase after lipolysis compared with the conventional mono-MCT or LCT SEDDS. In addition, the bioavailability of progesterone in the MCT&LCT SEDDS formulation was 3.82-fold higher than that of Utrogestan^® (a clinical oral administrated product) in a mouse model. Full article

Breast cancer remains a leading cause of cancer-related morbidity and mortality among women worldwide. Its treatment is complicated by molecular heterogeneity and the frequent development of multidrug resistance (MDR). Conventional drug delivery approaches are often limited by poor aqueous solubility, rapid systemic clearance, non-specific biodistribution, and off-target toxicity. This review will critically explore the possibility of surfactant-based drug delivery systems (DDSs) in addressing the constraints of standard breast cancer treatments. It focuses on the mechanisms by which surfactants promote solubility, facilitate cellular uptake, and overcome drug resistance, while also analyzing current therapeutic success and future directions. A thorough review of preclinical and clinical investigations was undertaken, focusing on important surfactant-based DDSs such as polymeric micelles, nanoemulsions, liposomes, and self-emulsifying systems (SEDDSs). Mechanistic insights into surfactant functions, such as membrane permeabilization and efflux pump inhibition, were studied alongside delivery systems incorporating ligands and co-loaded medicines. Pluronic^® micelles, TPGS-based systems, biosurfactant-stabilized nanoparticles, and lipid-based carrier surfactant platforms improve medication solubility, stability, and delivery. Genexol^® are examples of formulations demonstrating effective use and FDA translational potential. These systems now incorporate stimuli-responsive release mechanisms—such as pH, temperature, redox, immuno- and photodynamic treatment—artificial intelligence treatment design, and tailored treatment advancement, and responsive tailoring. Surfactant-enabled DDSs can improve breast cancer care. Innovative approaches for personalized oncology treatment are countered by the enduring challenges of toxicity, regulatory hurdles, and diminished scalability. Full article

Background/Objectives: Previous studies have shown that unformulated extracts of Passiflora ligularis leaves exhibit promising antidiabetic activity. This research aimed to demonstrate that formulating the extract into a self-emulsifying drug delivery system (PLE-SEDDS) enhanced its antidiabetic activity in a high-fat-diet/streptozotocin-induced diabetic mouse model. Methods: Blood glucose levels (BGLs) of diabetic mice were monitored during 21 days of oral administration of P. ligularis extract (PLE) and PLE-SEDDS. Control groups included metformin (positive control), vehicle, and SEDDS vehicle (negative controls). The animals underwent an oral glucose tolerance test (OGTT). The oxidative stress markers superoxide dismutase (SOD), catalase (CAT), and lipid peroxidation quantified by malondialdehyde (MDA) levels were measured in the kidney, liver, and pancreas, complemented with histopathological analysis. Additionally, plasma lipid profile parameters were evaluated. Results: The PLE-SEDDS formulation demonstrated superior efficacy compared to the PLE extract in improving antidiabetic outcomes. Animals treated with PLE-SEDDS exhibited a minimal increase in blood glucose levels (11.5%) during the OGTT, compared to 27.4% with PLE and over 77% in the vehicle groups. PLE-SEDDS also showed greater enhancement of SOD and CAT activity, along with a more pronounced reduction in MDA levels, indicating stronger protection against oxidative stress. Histological analysis revealed significant preservation of pancreatic islets, and lipid profile analysis showed greater reductions in triglycerides, cholesterol, and LDL-C, alongside increased HDL-C levels. Conclusions: Altogether, these findings suggest that PLE-SEDDS exhibits superior antihyperglycemic, hypolipidemic, and antioxidant effects compared to the unformulated extract, making this novel formulation a promising option for treating type 2 diabetes mellitus. Full article

Background/Objectives: This study aims to develop a solid self-nanoemulsifying drug delivery system (SNEDDS) to enhance the solubility and oral bioavailability of cannabidiol (CBD). Methods: According to the solubility of CBD and pseudo-ternary phase diagrams of the different ingredients, an oil (medium-chain triglyceride, MCT), mixed surfactants (Labrasol, Tween 80), and a co-surfactant (Transcutol) were selected for the SNEDDS. CBD-loaded SNEDDS formulations were prepared and characterized. The optimal SNEDDS was converted into solid SNEDDS powders via solid carrier adsorption and spray drying techniques. Various evaluations including flowability, drug release, self-emulsifying capacity, X-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), morphology, and pharmacokinetic characteristics were conducted. Subsequently, the solid powders with fillers, disintegrants, and lubricants were added to the capsules for accelerated stability testing. Results: The investigations showed that the two S-SNEDDS formulations improved the CBD’s solubility and in vitro drug release, with good storage stability. The pharmacokinetic data of Sprague Dawley rats indicated that a single oral dose of L-SNEDDS and spray drying SNEDDS led to a quicker absorption and a higher Cmax of CBD compared to the two oil-based controls (CBD-sesame oil (similar to Epidiolex^®) and CBD-MCT), which is favorable for the application of CBD products. Conclusions: SNEDDS is a prospective strategy for enhancing the solubility and oral bioavailability of CBD, and solid SNEDDS offers flexibility for developing more CBD-loaded solid formulations. Moreover, SNEDDS provides new concepts and methods for other poorly water-soluble drugs. Full article

Background: Sirtuin-1 (SIRT1), a histone deacetylase enzyme expressed in ocular tissues with intracellular localization, plays a critical protective role against various degenerative ocular diseases. The link between reduced SIRT1 levels and diabetic retinopathy (DR) has prompted the exploration of natural therapeutic compounds that act as SIRT1 agonists. Curcumin (CUR), which has been shown to upregulate SIRT1 expression, is one such promising compound. However, effective delivery of CUR to the deeper ocular tissues, particularly the retina, remains a challenge due to its poor solubility and limited ocular penetration following topical administration. Within this context, the development of self-nanoemulsifying drug delivery systems (SNEDDS) for CUR topical ocular delivery represents a novel approach. Methods: In accordance with our prior research, optimized SNEDDS loaded with CUR were developed and characterized post-reconstitution with simulated tear fluid (STF) at a 1:10 ratio, showing suitable physicochemical and technological parameters for ocular delivery. Results: An entrapment efficiency (EE%) of approximately 99% and an absence of drug precipitation were noticed upon resuspension with STF. CUR-SNEDDS resulted in a better stability and release profile than free CUR under simulated ocular conditions. In vitro analysis of mucoadhesive properties revealed that CUR-SNEDDS, modified with a cationic lipid, demonstrated enhanced interactions with mucin, indicating the potential for improved ocular retention. Cytotoxicity tests demonstrated that CUR-SNEDDS did not affect the viability of human corneal epithelial (HCE) cells up to concentrations of 3 μM and displayed superior antioxidant activity compared to free CUR in an oxidative stress model using retinal pigment epithelial (ARPE-19) cells exposed to hydroquinone (HQ). Cell uptake studies confirmed an enhanced accumulation of CUR within the retinal cells following exposure to CUR-SNEDDS compared to neat CUR. CUR-SNEDDS, at lower concentrations, were found to effectively induce SIRT1 expression. Conclusions: The cytocompatibility, antioxidant properties, and enhanced cellular uptake suggest that these developed systems hold promise as formulations for the delivery of CUR to the retina. Full article

Self-emulsifying drug delivery systems (SEDDS) consist of isotropic mixtures of oils, surfactants, and solvents that after dispersion emulsify in the aqueous media of the gastrointestinal tract (GIT). SEDDS can deliver hydrophobic drugs, which could enhance their oral bioavailability by protecting them from precipitation and degradation. However, it is important to find the appropriate ratio of their excipients to produce emulsions with the desirable physicochemical characteristics. In this sense, Design of Experiments (DoE) approaches such as central composite design (CCD) and Box–Behnken design (BBD) can reduce the number of experiments necessary to determine the best composition and preparation process of a SEDDS formulation. Therefore, this article aims to discuss drug delivery through SEDDS and how DoE approaches can aid researchers in achieving product quality specifications and optimizing the formulation preparation processes. For this, the most recent and relevant papers were analyzed. This review is expected to guide future research directions for more rational development of SEDDS. Full article

Chagas disease, caused by Trypanosoma cruzi, remains a neglected tropical disease with limited and often suboptimal chemotherapeutic treatment options. The WHO recommends nifurtimox (NFX) for treating Chagas disease, which, although it is effective in the early stages of infection, has variable efficacy in the chronic phase and induces adverse effects that frequently compromise the continuity of the treatment. This study focused on the development and characterization of innovative lipid-based self-emulsifying drug delivery systems (SEDDSs) and poly(ε-caprolactone) implants containing NFX. The SEDDS formulations modified the NFX release extent and rate. The implant characterization included thermal analysis, X-ray diffraction, thermo-optical analysis, and scanning electron microscopy, confirming the low interaction between NFX and the polymer. In vitro assays demonstrated the enhanced anti-T. cruzi activity of the NFX-SEDDS, with minimal cytotoxicity in mammalian cells. In vivo studies using T. cruzi-infected mice revealed that both formulations effectively suppressed parasitemia, achieving cure rates comparable to those of the standard oral NFX treatment. Additionally, the implants showed improved tolerability and sustained efficacy, delivering a prolonged effect equivalent to 40 oral doses. These findings highlight the potential of these innovative NFX formulations as promising alternatives for treating Chagas disease, particularly in the chronic phase, offering improved adherence and comparable efficacy to the existing therapies. Full article

Self-emulsifying drug delivery systems (SEDDS) represent an innovative approach to improving the solubility and bioavailability of poorly water-soluble drugs, addressing significant challenges associated with oral drug delivery. This review highlights the advancements and applications of SEDDS, including their transition from liquid to solid forms, while addressing the formulation strategies, characterization techniques, and future prospects in pharmaceutical sciences. The review systematically analyzes existing studies on SEDDS, focusing on their classification into liquid and solid forms and their preparation methods, including spray drying, hot-melt extrusion, and adsorption onto carriers. Characterization techniques such as droplet size analysis, dissolution studies, and solid-state evaluations are detailed. Additionally, emerging trends, including 3D printing, hybrid systems, and supersaturable SEDDS (Su-SEDDS), are explored. Liquid SEDDS (L-SEDDS) enhance drug solubility and absorption by forming emulsions upon contact with gastrointestinal fluids. However, they suffer from stability and leakage issues. Transitioning to solid SEDDS (S-SEDDS) has resolved these limitations, offering enhanced stability, scalability, and patient compliance. Innovations such as personalized 3D-printed SEDDS, biologics delivery, and targeted systems demonstrate their potential for diverse therapeutic applications. Computational modeling and in silico approaches further accelerate formulation optimization. SEDDS have revolutionized drug delivery by improving bioavailability and enabling precise, patient-centric therapies. While challenges such as scalability and excipient toxicity persist, emerging technologies and multidisciplinary collaborations are paving the way for next-generation SEDDS. Their adaptability and potential for personalized medicine solidify their role as a cornerstone in modern pharmaceutical development. Full article

Oils and lipids help make water-insoluble drugs soluble by dispersing them in an aqueous medium with the help of a surfactant and enabling their absorption across the gut barrier. The emergence of microemulsions (thermodynamically stable), nanoemulsions (kinetically stable), and self-emulsifying drug delivery systems added unique characteristics that make them suitable for prolonged storage and controlled release. In the 1990s, solid-phase lipids were introduced to reduce drug leakage from nanoparticles and prolong drug release. Manipulating the structure of emulsions and solid lipid nanoparticles has enabled multifunctional nanoparticles and the loading of therapeutic macromolecules such as proteins, nucleic acid, vaccines, etc. Phospholipids and surfactants with a well-defined polar head and carbon chain have been used to prepare bilayer vesicles known as liposomes and niosomes, respectively. The increasing knowledge of targeting ligands and external factors to gain control over pharmacokinetics and the ever-increasing number of synthetic lipids are expected to make lipid nanoparticles and vesicular systems a preferred choice for the encapsulation and targeted delivery of therapeutic agents. This review discusses different lipids and oil-based nanoparticulate systems for the delivery of water-insoluble drugs. The salient features of each system are highlighted, and special emphasis is given to studies that compare them. Full article

Diabetes is a global disease that can lead to a range of complications. Currently, the treatment of type 2 diabetes focuses on oral hypoglycemic drugs and insulin analogues. Studies have shown that drugs such as oral metformin are useful in the treatment of diabetes but can limit the liver’s ability to release sugar. The development of glucose-lowering peptides has provided new options for the treatment of type 2 diabetes. Peptide drugs have low oral utilization due to their easy degradation, short half-life, and difficulty passing through the intestinal mucosa. Therefore, improving the oral utilization of peptide drugs remains an urgent problem. This paper reviews the research progress of peptide drugs in the treatment of diabetes mellitus and proposes that different types of nano-formulation carriers, such as liposomes, self-emulsifying drug delivery systems, and polymer particles, should be combined with peptide drugs for oral administration to improve their absorption in the gastrointestinal tract. Full article

Background/Objectives: This study compared two pilot scale continuous manufacturing methods of solid self-emulsifying drug delivery systems (SEDDSs) via hot melt extrusion (HME). Methods: A model poorly water-soluble drug carvedilol in low dose (0.5–1.0% w/w) was processed in HME either in a conventional powder form or pre-dissolved in the liquid SEDDS. Results: HME yielded a processable final product with up to 20% w/w SEDDS. Addition of carvedilol powder resulted in a non-homogeneous drug distribution in the extrudates, whereas a homogeneous drug distribution was observed in pre-dissolved carvedilol. SEDDSs were shown to have a plasticizing effect, reducing the HME process torque up to 50%. Compatibility between excipients and carvedilol in the studied ratios after HME was confirmed via DSC and WAXS, demonstrating their amorphous form. Solid SEDDSs with Kollidon^® VA64 self-emulsified in aqueous medium within 15 min with mean droplet sizes 150–200 nm and were independent of the medium temperature, whereas reconstitution of Soluplus^® took over 60 min and mean droplet size increased 2-fold from 70 nm to 150 nm after temperature increased from 25 °C to 37 °C, indicating emulsion phase inversion at cloud point. Conclusions: In conclusion, using Kollidon^® VA64 and pre-dissolved carvedilol in SEDDS has shown to yield a stabile HME process with a homogenous carvedilol content in the extrudate. Full article

Drug Delivery Systems (DDSs) of known drugs are prominent candidates for new and more effective treatments of various diseases, as they may increase drug solubility, dissolution velocity, and bioavailability. Mitotane (o,p′-dichlorodimethyl dichloroethane [o,p′-DDD]) is used for the treatment of adrenocortical cancer and, occasionally, Cushing’s syndrome. However, the efficacy of mitotane is limited by its low oral bioavailability, caused by its extremely poor aqueous solubility. This research explores the development of a new powder self-emulsifying drug delivery system (P-SEDDS) for mitotane to improve its oral bioavailability. The study focuses on the new concept of a mitotane-loaded P-SEDDS to overcome the challenges associated with its limited solubility and high logP, thereby improving its therapeutic efficacy, reducing off-target toxicity, and avoiding first-pass metabolism. The P-SEDDS formulations were meticulously designed using only α-cyclodextrin and oil, with the goal of achieving a stable and efficient P-SEDDS. The optimized formulation was characterized for pharmaceutical properties, and its pharmacokinetic behavior was examined in rats. The results demonstrated a significant enhancement in the bioavailability of mitotane when delivered through the P-SEDDS, attributed to the increased dissolution velocity and improved absorption of the poorly water-soluble drug. The results suggest that a mitotane-loaded P-SEDDS has distinctly enhanced in vitro and in vivo performance compared with conventional mitotane formulations (Lysodren^®), which leads to the conclusion that the P-SEDDS formulation could be a viable and effective strategy for improving the dissolution rate and bioavailability of poorly aqueous-soluble ingredients. Full article

Neratinib maleate (NM), a tyrosine kinase inhibitor, is used in the treatment of breast cancer. NM is orally administered at a high dose of 290 mg due to its low solubility and poor dissolution rate at pH > 3, as well as gut-wall metabolism limiting its bioavailability. Self-emulsifying drug delivery systems (SEDDSs) of NM were developed in the current study to improve its oral bioavailability. The oily vehicle (clove oil) was selected based on the solubility of NM, while the surfactant and the cosurfactant were selected based on the turbidimetric analysis. Three different sets were screened for surfactant selection in the preparation of SEDDS formulations, the first set containing Cremophor^® EL alone as the surfactant, the second set containing a mixture of Cremophor^® EL (surfactant) and Caproyl^® PGMC (cosurfactant), and the third set containing a mixture of Cremophor^® EL (surfactant) and Capmul^® MCM C8 (cosurfactant). Propylene glycol was used as the cosolubilizer in the preparation of SEDDSs. A series of studies, including the construction of ternary phase diagrams to determine the zone of emulsification, thermodynamic stability studies (involving dilution studies, freeze-thaw, and heating–cooling studies), turbidimetric analysis, and physicochemical characterization studies were conducted to identify the two most stable combinations of SEDDSs. The two optimized SEDDS formulations, TP16 and TP25, consisted of clove oil (45% w/w) and propylene glycol (5% w/w) in common but differed with respect to the surfactant or surfactant mixture in the formulations. TP16 was prepared using a mixture of Cremophor^® EL (surfactant) and Caproyl^® PGMC (cosurfactant) in a 4:1 ratio (50% w/w), while TP25 contained only Cremophor^® EL (50% w/w). The mean globule sizes were 239.8 ± 77.8 nm and 204.8 ± 2.4 nm for TP16 and TP25, respectively, with an emulsification time of <12 s for both formulations. In vitro drug dissolution studies performed at different pH conditions (3.0, 4.5, 6.8) have confirmed the increase in solubility and dissolution rate of the drug by TP16 and TP25 at all pH conditions compared to plain NM. An oral pharmacokinetic study in female Wistar rats showed that the relative bioavailability (Frel) values of TP16 and TP25 over the plain NM were 2.18 (p < 0.05) and 2.24 (p < 0.01), respectively. Full article

Liquid self-nano emulsifying drug delivery systems (SNEDDS) of furosemide (FSM) have been explored as a potential solution for enhancing solubility and permeability but are associated with rapid emulsification, spontaneous drug release, and poor in vivo correlation. To overcome the shortcoming, this study aimed to develop liquid and solid self-emulsifying drug delivery systems for FSM, compare formulation dynamics, continue in vivo therapeutic efficacy, and investigate the advantages of solidification. For this purpose, liquid SNEDDS (L-SEDDS-FSM) were formed using oleic acid as an oil, chremophore EL, Tween 80, Tween 20 as a surfactant, and PEG 400 as a co-surfactant containing 53 mg/mL FSM. At the same time, solid SNEDDS (S-SEDDS-FSM) was developed by adsorbing liquid SNEDDS onto microcrystalline cellulose in a 1:1 ratio. Both formulations were evaluated for size, zeta potential, lipase degradation, and drug release. Moreover, in vivo diuretic studies regarding urine volume were carried out in mice to investigate the therapeutic responses of liquid and solid SNEDDS formulations. After dilution, L-SEDDS-FSM showed a mean droplet size of 115 ± 4.5 nm, while S-SEDDS-FSM depicted 116 ± 2.6 nm and zeta potentials of −5.4 ± 0.55 and −6.22 ± 1.2, respectively. S-SEDDS-FSM showed 1.8-fold reduced degradation by lipase enzymes in comparison to L-SEDDS-FSM. S-SEDDS-FSM demonstrated a sustained drug release pattern, releasing 63% of the drug over 180 min, in contrast to L-SEDDS-FSM, exhibiting 90% spontaneous drug release within 30 min. L-SEDDS-FSM exhibited a rapid upsurge in urine output (1550 ± 56 μL) compared to S-SEDDS-FSM, showing gradual urine output (969 ± 29 μL) till the 4th h of the study, providing sustained urine output yet a predictable therapeutic response. The solidification of SNEDDS effectively addresses challenges associated with spontaneous drug release and precipitation observed in liquid SNEDDS, highlighting the potential benefits of solid SNEDDS in improving the therapeutic response of furosemide. Full article

Cutaneous leishmaniasis (CL) is a neglected tropical disease. The treatment is restricted to drugs, such as meglumine antimoniate and amphotericin B, that exhibit toxic effects, high cost, long-term treatment, and limited efficacy. The development of new alternative therapies, including the identification of effective drugs for the topical and oral treatment of CL, is of great interest. In this sense, a combination of topical photodynamic therapy (PDT) with chloroaluminum phthalocyanine liposomes (Lip-ClAlPc) and the oral administration of a self-emulsifying drug delivery system containing fexinidazole (SEDDS-FEX) emerges as a new strategy. The aim of the present study was to prepare, characterize, and evaluate the efficacy of combined therapy with Lip-ClAlPc and SEDDS-FEX in the experimental treatment of Leishmania (Leishmania) major. Lip-ClAlPc and SEDDS-FEX were prepared, and the antileishmanial efficacy study was conducted with the following groups: 1. Lip-ClAlPc (0.05 mL); 2. SEDDS-FEX (50 mg/kg/day); 3. Lip-ClAlPc (0.05 mL)+SEDDS-FEX (50 mg/kg/day) combination; 4. FEX suspension (50 mg/kg/day); and 5. control (untreated). BALB/c mice received 10 sessions of topical Lip-ClAlPc on alternate days and 20 consecutive days of SEDDS-FEX or FEX oral suspension. Therapeutical efficacy was evaluated via the parasite burden (limiting-dilution assay), lesion size (mm), healing of the lesion, and histological analyses. Lip-ClAlPc and SEDDS-FEX presented physicochemical characteristics that are compatible with the administration routes used in the treatments. Lip-ClAlPc+SEDDS-FEX led to a significant reduction in the parasitic burden in the lesion and spleen when compared to the control group (p < 0.05) and the complete healing of the lesion in 43% of animals. The Lip-ClAlPc+SEDDS-FEX combination may be promising for the treatment of CL caused by L. major. Full article