Search Results (93)

Root tensile strength (T_r) is a fundamental root mechanical trait and serves as a key parameter for assessing the contribution of vegetation to slope stability. T_r is known to exhibit high intraspecific variability, but whether T_r varies with season remains unclear. Here, we investigated the seasonal variation in T_r in two commonly seen herbaceous species, i.e., Artemisia argyi and Cirsium setosum, both of which can be future candidates for revegetating species along roadsides in temperate and subtropical regions. We examined the T_r of their first- (closest to the stem base) and third-order lateral roots sampled in the southwest of Henan, China, in two distinct periods: September (late growing season) and December (dormant season). We found that the T_r of the thicker, first-order roots in September was significantly greater than that in December. However, such seasonal variation was not found for the thinner third-order roots. When fitting the relationship between T_r and root diameter using a two-parameter power law equation, the calibrated equation using the data collected in September led to a marked predictive bias to the data collected in December. All the above patterns were consistent for both species. Soil moisture, which exhibited strong seasonal variation in the study area, might be the key cause of variation in T_r. Our study is among the first to demonstrate seasonal variation in root mechanical traits, indicating that season potentially plays a non-negligible role in impacting soil reinforcement and slope stability by modifying roots’ mechanical quality. Full article

The Gonghe–Yushu Expressway (GYE) traverses the degrading permafrost region of the Qinghai–Xizang Plateau, where climate warming has resulted in widespread water ponding, posing significant engineering challenges. However, the spatiotemporal dynamics of this water accumulation and its impacts on permafrost embankment stability remain inadequately understood. This study integrates high-resolution unmanned aerial vehicle (UAV) remote sensing with ground-penetrating radar (GPR) to characterize the spatial patterns of water ponding and to quantify the spatial distribution, seasonal dynamics, and hydrothermal effects of roadside water on permafrost sections of the GYE. UAV-derived point cloud models, optical 3D models, and thermal infrared imagery reveal that approximately one-third of the 228 km study section of GYE exhibits water accumulation, predominantly occurring near the embankment toe in flat terrain or poorly drained areas. Seasonal monitoring showed a nearly 90% reduction in waterlogged areas from summer to winter, closely corresponding to climatic variations. Statistical analysis demonstrated significantly higher embankment distress rates in waterlogged areas (14.3%) compared to non-waterlogged areas (5.7%), indicating a strong correlation between surface water and accelerated permafrost degradation. Thermal analysis confirmed that waterlogged zones act as persistent heat sources, intensifying permafrost thaw and consequent embankment instability. GPR surveys identified notable subsurface disturbances beneath waterlogged sections, including a significant lowering of the permafrost table under the embankment and evidence of soil loosening due to hydrothermal erosion. These findings provide valuable insights into the spatiotemporal evolution of water accumulation along transportation corridors and inform the development of climate-adaptive strategies to mitigate water-induced risks in degrading permafrost regions. Full article

Impervious surfaces reduce natural infiltration, leading to increased runoff, erosion, and pollutant transport. The Alabama Department of Transportation (ALDOT) relies on implementing infiltration swales, a linear bioretention-based practice, along roadside drainage channels to reduce surface runoff. This study developed and constructed modified permeameters and infiltrometers to evaluate and optimize media used to construct infiltration swales. The average measured falling head infiltration rate of sandy topsoil used in the media matrix was 0.63 ft/day (0.19 m/day). A series of amended topsoil mixtures were tested to improve the infiltration rate of the media. In particular, the mixture of 80% topsoil and 20% pine bark fines (by weight) significantly improved the infiltration rates of the swale media. Through iterative testing, the F3 design with 6 in. (15.2 cm) mixture and 10 in. (25.4 cm) sand achieved up to 13.73 ft/day (4.18 m/day) of infiltration rate under constant head, far surpassing the infiltration rate of the current ALDOT design. SWMM bioretention cell models were developed to understand the swale infiltration process and revealed that the infiltration rates obtained from column tests were the saturated hydraulic conductivities of the soil layer when there was no other restriction on vertical flow. The simulated swale hydrological performance depends not only on variations in soil conductivity but also on other swale characteristics under field conditions. Findings from this research can be used to enhance the performance of infiltration-based stormwater practices. Full article

This study investigates the heavy metal contamination in urban and peri-urban soils of Thessaloniki, Greece, over a two-year period (2023–2024). A total of 208 composite soil samples were systematically collected from 52 sites representing diverse land uses, including high-traffic roadsides, industrial zones, residential neighborhoods, parks, and mixed-use areas, with sampling conducted both after the wet (winter) and dry (summer) seasons. Soil physicochemical properties (pH, electrical conductivity, texture, organic matter, and calcium carbonate content) were analyzed alongside the concentrations of heavy metals such as Cd, Co, Cr, Cu, Mn, Ni, Pb, and Zn. A pollution assessment employed the Geoaccumulation Index (I_geo), Contamination Factor (Cf), Pollution Load Index (PLI), and Potential Ecological Risk Index (RI), revealing variable contamination levels across the city, with certain hotspots exhibiting a considerable to very high ecological risk. Multivariate statistical analyses (PCA and HCA) identified distinct anthropogenic and geogenic sources of heavy metals. Health risk assessments, based on USEPA models, evaluated non-carcinogenic and carcinogenic risks for both adults and children via ingestion and dermal contact pathways. The results indicate that while most sites present low to moderate health risks, specific locations, particularly near major transport and industrial areas, pose elevated risks, especially for children. The findings underscore the need for targeted monitoring and remediation strategies to mitigate the ecological and human health risks associated with urban soil pollution in Thessaloniki. Full article

Urban green spaces are integral components of city ecosystems, supporting essential belowground microbial communities such as arbuscular mycorrhizal fungi (AMF). Understanding how green space types influence AMF communities is key to promoting urban ecological function. This study examines AMF diversity, community assembly, and co-occurrence network structures in two urban green space types—park and roadside—in Kaifeng, Henan Province, China. Soil samples were collected from both sites, and AMF community composition was assessed using high-throughput sequencing. Environmental variables, including total nitrogen (TN), available phosphorus (AP), available potassium (AK), water content, and pH, were measured to evaluate their influence on AMF communities. The results indicate marked differences between the two green space types. Park soils support significantly greater AMF species richness and more complex co-occurrence networks than roadside soils. These differences are correlated with higher nutrient levels in park soils. By contrast, AMF communities in roadside soils are more strongly associated with soil water content and pH, resulting in reduced diversity and more homogeneous community structures. Stochastic processes predominantly govern community assembly in both green space types, with roadside green spaces being more influenced by stochastic processes than park green spaces. These findings highlight the influence of urban landscape type on AMF communities and provide guidance for enhancing urban biodiversity through targeted landscape planning and soil management. In future work, we will implement long-term AMF monitoring across different green-space types and evaluate specific management practices to optimize soil health and ecosystem resilience. Full article

(1) Background: Road traffic emissions significantly influence heavy metal accumulation in roadside agricultural soils, posing risks to food safety. (2) Methods: This study investigated the concentrations of heavy metals (As, Cd, Cu, Cr, Hg, Ni, Pb, and Zn) in paddy soils at 96 soil samples along National Highways G107 and G312 in southern Henan, China, to evaluate the contamination situation and ecological risks using a multimetric approach. (3) Results: Cd, Hg, Cu, and Zn exceeded provincial background levels. Cd dominated contamination, showing heavy pollution (single factor index, P_i > 5) within 40 m of G107 and moderate/heavy levels (P_i = 2–5) along G312. The Nemerow index (P_N) classified both highways as slightly polluted (P_N = 0.70–0.81), with higher contamination along G107. Geoaccumulation indices identified Cd as mildly/moderately polluted within 40 m of G107 and G312 and Zn as slightly contaminated within 20–40 m of G107. Despite low total ecological risk, Cd contributed >75% to cumulative risk due to its high toxicity (Tr = 30). (4) Conclusions: Road traffic constitutes one of the contributors to heavy metal accumulation in paddy soils along national highways in southern Henan Province, while agricultural cultivation adjacent to transportation corridors poses potential food safety risks. Full article

Polychlorinated biphenyls (PCBs) are synthetic organic compounds that were widely used in industrial applications throughout the 20th century. Due to their chemical stability, resistance to degradation and ability to bioaccumulate and biomagnify through food chains, PCBs pose long-term environmental and health risks. Due to these characteristics, PCBs have been globally regulated as persistent organic pollutants (POPs), despite being banned from production in most countries decades ago. This study investigates temporal trends in PCB contamination in urban soils of Bucharest over a 20-year period (2002–2022), focusing on six principal congeners (PCB 28, 52, 101, 138, 153, and 180) sampled from 13 locations, including roadsides and urban parks. Gas chromatography and spatial analysis using inverse distance weighting (IDW) revealed a marked reduction in Σ6PCB concentrations, declining from 0.0159 mg/kg in 2002 to 0.0065 mg/kg in 2022, with statistically significant differences confirmed by Kruskal–Wallis analysis (p < 0.05). This decline is primarily attributed to reduced emissions, source control measures, and natural attenuation. However, the persistence of PCBs in localized hotspots is influenced by secondary dispersion mechanisms, such as atmospheric deposition and surface runoff, which redistribute contaminants rather than eliminate them. Health risk assessments via ingestion, dermal absorption, and inhalation routes confirmed negligible carcinogenic risk for both adults and children. Although measurable progress has been achieved, the persistence of localized contamination underscores the need for targeted remediation strategies and sustained environmental monitoring to protect vulnerable urban areas from recontamination. Full article

The urban zone around the city of Volos, a Greek city with a historically industrialized profile, faces threats arising from Potential Toxic Element (PTE) contamination. The scope of this study is to determine the contamination levels of 10 PTEs in three urban areas which are located near the industrial zone in the city of Volos. For this purpose, a total of 30 soil samples from parks, playgrounds and roadsides were collected from the Agios Georgios, Velestino and Rizomilos areas (Magnesia, Central Greece). The sampling was conducted in June 2022 and the concentrations of chromium (Cr), nickel (Ni), copper (Cu), arsenic (As), cadmium (Cd), lead (Pb), iron (Fe), manganese (Mn), cobalt (Co) and zinc (Zn) were measured through inductively coupled plasma mass spectrometry (ICP-MS). The Contamination Factor (CF), Pollution Load Index (PLI) and Geo-accumulation Index (Igeo) revealed moderate pollution in most cases, whereas in some sites the contamination was significant for Ni or for As. Principal Component Analysis showed concomitant changes for some PTEs in Component 1 and for others in Component 2, explaining approximately 67% of the variation. K-means Cluster Analysis showed two distinct groups of PTE-impacted sites within these urban areas. It can be postulated that industrial activities may have a carry-over effect on the soil in residential areas. Frequent monitoring of areas deemed as “contaminated” and time-series data are needed to examine in depth the soil pollution in cities and its possible shifts in relation to the changes in industrialization status in the extended urban areas. Full article

Understanding the factors controlling the stability of soil organic carbon stocks, notably in urban areas such as roadsides, can contribute to a better quantification of the ecosystem services that these areas can provide, a key to improving urban planning and management. This study assessed soil carbon stability based on physical fractions in roadside ecosystems of southern Quebec, Canada. We measured the carbon content of soil mineral-associated (MAOC) and particulate (POC) organic carbon physical fractions of roadsides with different land uses and investigated relationships with road density, soil concentration of heavy metals, and soil salinity. We used the MAOC/POC ratio to evaluate the carbon storage potential of each physical fraction. The stable physical fraction MAOC contained a higher carbon content than the labile soil fraction POC across different depths. The MAOC/POC ratio was higher for sites with a more recent history of agriculture abandonment. MAOC was positively linked to road density, soil salinity, and heavy metal concentration. This study suggested that roadside soils have a high capacity to store carbon in a stable form. Additionally, the chemical properties of roadside soils did not adversely affect the physical stability of soil carbon, especially in the top mineral soil. Full article

Gazania is a genus of herbaceous plants from the Asteraceae (daisy) family. Native to southern Africa, several species of this genus have been introduced to different countries as ornamental garden plants due to their beautiful flowers. In the wild, Gazania species have been observed with flowers of different shades of pink, red, yellow, orange and combination of these colours. Some species of Gazania have escaped the gardens and become highly invasive weeds in their introduced range. Invasive, drought-tolerant and prolific seed-producing Gazania plants are found in Australia, New Zealand, Algeria, Egypt, Europe and California. In particular, two perennial species, Gazania linearis and Gazania rigens, commonly known as gazania, have become a major problem in Australia. They have naturalized and are widespread in a range of environments, such as roadsides, pasture/grassland systems, coastal sand dunes, and natural and managed ecosystems. Their seeds and underground reproductive structures are carried along roadsides by slashers, machinery, wind and water, and spread into native vegetation, pastures, horticultural crops and broadacre agronomic crop production systems. Gazania causes significant environmental, production and economic losses in the infested ecosystems. While limited research has been conducted on their biology and invasion ecology, anecdotal evidence suggests that the ability of gazania plants to produce a large number of seeds form thick, dense populations, and tolerate harsh environments, including drought, heat and sub-optimal soil pH, making them persistent, problematic weed species. In addition, perennial growth habit, high genetic diversity and allelopathic potential have also been suggested to facilitate their invasion success, but no research has been conducted on these aspects. Gazania is very difficult to manage, and currently, there are no effective control options available, including chemical herbicides. The lack of knowledge on their biology, invasion pathways and management is hindering the effective management of gazanias. This review compiles and synthesizes currently available information on the distribution, biology, ecology and management of weedy gazania species, with a particular focus on Australia. We also highlight the key knowledge gaps for future research. We believe this information provides researchers and practitioners with an up-to-date account on the weedy aspects of these popular ornamental plants and will help improve management efforts. Full article

De-icing salt used for safe winter driving can have negative impacts on local water quality, vegetation, and soils. This study aimed to evaluate the salt tolerance of reeds (Phragmites australis) against calcium chloride (CaCl₂) and the biofiltration effect of combining it with topsoil biofilters for desalination in roadside ditches. Two experiments were conducted in a controlled environmental greenhouse over a period of 150 days. For the first experiment, the salt tolerance of P. australis was examined after treating reeds with five different concentrations of de-icing salt: 0, 1, 2, 5, and 10 g·L⁻¹. In a second experiment, the effect of combining two topsoil filters (expanded clay and activated carbon), each planted with and without reeds, was investigated under a high CaCl₂ concentration of 10 g·L⁻¹. As the CaCl₂ concentration increased, the electrical conductivity (EC) of soil leachate and the level of salt exchangeable cations (K⁺, Ca²⁺, Na⁺, and Mg²⁺) significantly increased whereas the acidity (pH) significantly decreased (all p ≤ 0.05). No statistical difference was observed in leaf length or width, while plant height, number of leaves, and both fresh and dry weights were significantly increased with increasing CaCl₂ concentrations (p ≤ 0.05). Treatments using topsoil filters, particularly those with activated carbon and reeds, showed the greatest reduction in leachate EC and total exchange cations values. These results suggest that combining P. australis with topsoil filters can assist biofiltration effectively, demonstrating its applicability even in roadside soils subject to extreme levels of de-icing salts. Full article

Forest roads have been recognized as one of the significant contributors to soil erosion processes in forested areas. The construction and maintenance of forest roads can cause severe environmental impacts, including soil erosion, sedimentation, and degradation of aquatic ecosystems. The main objective of the present study is to analyze the impact of forest road networks on soil erosion and sedimentation in the context of the Zagros forestlands, Iran. This study aims to assess the soil erosion and sedimentation on forest roads in four case studies in the Zagros forestlands. This study collected data using field surveys and SEDMODL equations to determine input factors and sedimentation and erosion rates. This study found that roadside erosion is strongly correlated with geological factors, road width, and precipitation factors. The height changes of 144 benchmarks were recorded during one study year (2021–2022) on four study roads, and the measured results of erosion benchmarks indicated an average soil erosion of 3, 2.6, 4.7, and 3.5 mm per year around the Bideleh, Kohian, Nazi, and Tabarak roads, respectively. This study measured soil erosion and sedimentation at three distances (5, 15, and 25 m) from the road, and found a significant difference in the height changes of the benchmarks at varying distances from the study roads. A hot-spot analysis was conducted using GIS 10.8, and the results indicated that a significant portion of the studied forest roads had very high erosion production and hot spots. The results of the hot-spot analysis indicated that 30.8%, 22.6%, 39.8%, and 14.5% of the study forest roads, Nazi, Tabarak, Bideleh, and Kohian roads, respectively, are identified as areas with very high erosion production and hot spots. These results highlight the need for effective management strategies to minimize the impact of erosion on road infrastructure and the surrounding environment. Overall, this study provides important insights into the soil erosion and sedimentation on forest roads, and the findings presented here can be used to inform future road construction and maintenance. Full article

Studies on tollbooth workers involving the concentration of metal(loid)s in highway dust are scarce. We aimed to assess the levels of metal(loid)s in soils and washed and unwashed leaves of Brachiaria decumbens on roadsides. Dust deposition and heavy metal content in the leaves are used to estimate the exposure of tollbooth workers to oral, inhalation, and dermal ingestion of metals in highway dust. The concentrations of aluminum (Al), arsenic (As), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), nickel (Ni), zinc (Zn), and lead (Pb) in washed and unwashed soil and leaves were analyzed using inductively coupled plasma optical emission spectroscopy. The results showed that soils along highways had a high concentration of heavy metals. Concentrations of Cd, Cu, Cr, Ni, and Pb near the roundabout and tollbooth are higher than the concentrations at the points between them. The highest transfer factor values were determined for aluminum. In the case of the non-carcinogenic effect, the hazard index (HI < 1) of tollbooth workers due to oral exposure to street dust containing metal(loid)s is higher than dermal contact and inhalation. The Incremental Lifetime Cancer Risk showed a high potential carcinogenic risk for As and Cd. Full article

Although the effects of invasive alien plants on natural ecosystems are well known, the effects of specific plant species can vary across habitat types and disturbance intensity. This study was carried out to analyze the effects of Lantana camara on associated vegetation and soil physico-chemical properties at invaded and non-invaded sites across three different habitat types (forest edge, fallow land, and roadside) in central Nepal. We sampled 50 pairs of 5 m × 5 m (for shrub species) and 1 m × 1 m (for herbs species) plots at invaded and non-invaded sites in each habitat and recorded community variables for each species within the sampling plots for both wet (monsoon) and dry (pre-monsoon) seasons. Further, we collected soil samples from each quadrat and determined the soil physico-chemical properties. We recorded 137 species of flowering plants (119 from non-invaded and 97 from invaded plots) and classified them in accordance with life form/habit. In invaded sites, we found a significant decline in species diversity as indicated by the Simpson and Shannon diversity indices. Specifically, L. camara reduced the species richness, Simpson index, and Shannon diversity index by 36.84%, 11.84%, and 40.21%, respectively. Soil nutrients such as total nitrogen, soil organic carbon, and available phosphorus were significantly higher in invaded sites than non-invaded ones except for available potassium and soil pH. This study provided evidence that Lantana L. camara has a substantial impact on the understory plant community assemblage and the physico-chemical properties of soil. The results suggest that the protection of native plant community requires management of L. camara by implementing appropriate measures. Full article

The European Union’s recent decision to renew the authorization for the use of glyphosate until 15 December 2033 has stimulated scientific discussion all around the world regarding its toxicity or otherwise for humans. Glyphosate is a chemical of which millions of tons have been used in the last 50 years worldwide to dry out weeds in cultivated fields and greenhouses and on roadsides. Concern has been raised in many areas about its possible presence in the food chain and its consequent adverse effects on health. Both aspects that argue in favor of toxicity and those that instead may indicate limited toxicity of glyphosate are discussed here. The widespread debate that has been generated requires further investigations and field measurements to understand glyphosate’s fate once dispersed in the environment and its concentration in the food chain. Hence, there is a need for validated analytical methods that are available to analysts in the field. In the present review, methods for the analytical determination of glyphosate and its main metabolite, AMPA, are discussed, with a specific focus on chromatographic techniques applied to cereal products. The experimental procedures are explained in detail, including the cleanup, derivatization, and instrumental conditions, to give the laboratories involved enough information to proceed with the implementation of this line of analysis. The prevalent chromatographic methods used are LC-MS/MS, GC-MS/SIM, and GC-MS/MS, but sufficient indications are also given to those laboratories that wish to use the better performing high-resolution MS or the simpler HPLC-FLD, HPLC-UV, GC-NPD, and GC-FPD techniques for screening purposes. The concentrations of glyphosate from the literature measured in wheat, corn, barley, rye, oats, soybean, and cereal-based foods are reported, together with its regulatory status in various parts of the world and its accumulation mechanism. As for its accumulation in cereals, the available data show that glyphosate tends to accumulate more in wholemeal flours than in refined ones, that its concentration in the product strictly depends on the treatment period (the closer it is to the time of harvesting, the higher the concentration), and that in cold climates, the herbicide tends to persist in the soil for a long time. Full article