Search Results (2,622)

Red mud (RM), a waste residue from alumina extraction, poses serious environmental impacts on water resources, land resources, and ecological systems due to its large production, high alkalinity, and low resource utilization. To enhance the overall utilization rate of RM solid-waste materials, this study focuses on RM, blast furnace slag (BFS), and fly ash (FA) cementitious materials as the research objects. Through mechanical tests and microstructural analysis, the optimal mix ratio of the ternary RM-based cementitious material is determined, and a systematic study of its microstructural evolution is conducted. Concurrently, fractal theory was used to quantify the microstructure of the material, revealing the evolution laws of the mechanical properties of ternary red-mud-based cementitious materials from a mesoscopic perspective. The results indicate that reducing the proportion of RM or slag alone to increase the FA content yields inferior modification effects compared to simultaneously reducing the proportions of both RM and BFS to increase FA content. Compared with the binary RM-based cementitious material made of RM and BFS, the 28-day compressive strength increases by approximately 25%, reaching 50 MPa. The incorporation of FA can reduce the volume of harmful pores in the cementitious matrix, providing ample reactive material for subsequent hydration reactions, promoting later hydration products, and improving the distribution of the internal pore structure. This leads to increases in both fractal dimensions, and a rational mix proportion can effectively improve the microstructure and mechanical properties of the ternary RM-based cementitious material. Full article

The textile and clothing industry exerts a significant environmental impact in the EU, contributing heavily to water, land, and resource depletion, with waste generation expected to rise sharply due to fast fashion trends. Accelerating circularity and closed-loop production is critical to reduce the sector’s ecological footprint. This study investigates newer approaches for the removal of indigo prints from cotton (CO) and polyester (PES) textiles using aqueous-based solutions and/or ozone treatment. Aqueous alkaline solutions containing reducing agents and surfactants were evaluated, as well as dry and wet ozone treatments. The efficacy of colour removal was assessed via spectrophotometric analysis [colour strength (K/S) and colour difference (ΔE)] and the fabrics were tested for dimensional stability and tensile strength before and after treatment. Results reveal that surfactant-assisted aqueous treatments enable effective pigment removal and maintain textile properties, supporting subsequent reprinting for textile upcycling. Wet ozone treatment also promoted substantial decolourisation, particularly in cellulosic substrates. Although PES samples exhibited better mechanical resistance, they revealed limited pigment extraction upon ozone treatment. These findings demonstrate the potential of chemical treatments using aqueous-based solutions and surfactants for circular textile applications, facilitating pigment removal without compromising substrate integrity, and boosting the upcycling. Full article

Driven by renewable energy, the operating temperatures of alkaline water electrolyzers (AWEs) exhibit significant dynamic variations. Conventional control strategies rely on fixed startup parameters, causing dispatch plans to deviate from actual physical states, which leads to transient over-temperature or startup failures. To address this issue, this paper proposes a dual-layer optimization strategy for multi-electrolyzer systems based on temperature–power adaptation. First, a thermo-electro-hydrogen coupling model is established to quantitatively reveal the dynamic relationship among the initial temperature, startup power, and transition time. This relationship is utilized to construct a dynamic startup boundary, overcoming the limitations of traditional static constraints. Within the proposed framework, the upper layer utilizes a Mixed-Integer Linear Programming (MILP) model to formulate state-switching and baseline power allocation plans derived from short-term forecasts. Concurrently, the lower layer employs the Mongoose Optimization Algorithm (MOA) for real-time rolling optimization, enabling the system to actively perceive temperature variations and adaptively schedule power allocation. Simulations across typical seasonal scenarios validate the strategy’s superiority. In a typical spring scenario, compared to the traditional Daisy Chain and Rotation Control strategies, as well as the Equal Allocation strategy, the proposed approach reduces total startup time and energy consumption by 59.2% and 54.6%, respectively. Furthermore, it increases wind power accommodation rates by 17.7% and 14.2%, and total hydrogen production by 20.0% and 14.9%, respectively. These superior renewable energy utilization and production efficiencies are robustly maintained across typical seasonal scenarios. By actively perceiving actual temperatures for adaptive scheduling, the proposed strategy ultimately ensures synergy and reliability between the control strategy and actual operational constraints under fluctuating conditions. Full article

Soil nutrient loss and infertility in rocky desertification areas severely constrain ecological restoration. Exploring the impacts of external field remediation technologies on soil quality in these regions may offer novel strategies for soil enhancement and ecosystem recovery. This study conducted a three-month experiment to investigate the impact of continuous electric (ET, 20 V) and magnetic (MT, 200 mT) field treatments on soil nutrients, enzyme activities, and bacterial communities in simulated moderate and severe rocky desertification soils. Results showed that although an overall declining trends in total contents of key soil nutrients (Total nitrogen, total phosphorus, and total potassium), both electric and magnetic field treatments effectively mitigated the decreases of total nitrogen and potassium content (with the exception of total phosphorus) in rocky desertification soils, while improving their available contents compared to the control (CK). Electric field application significantly reduced the pH of moderate and severe rocky desertification soils through electrolysis, shifting the soil from alkaline (pH 7.69 and 7.73, respectively) to slightly acidic (pH 6.71 and 6.37, respectively); Both electric and magnetic field treatments enhanced urease and sucrase activities in moderately and severely rocky desertified soils. Compared to the CK, the increases were 21.92%, 4.46%, 5.70%, and 66.43% in moderately rocky desertified soil, and 10.06%, 42.15%, 20.66%, and 0.93% in severely rocky desertified soil, respectively. Their effects on phosphatase and catalase activities varied with the degree of rocky desertification. However, in severely rocky desertified soil, both treatments significantly increased phosphatase and catalase activities by 19.55%, 24.63%, 61.07%, and 38.05% compared to the CK, respectively. Furthermore, both electric and magnetic treatments significantly reduced bacterial α-diversity (chao1, ACE, Shannon, Simpson, and Pielou J indices) but optimized community structure by enriching dominant phyla with specific ecological functions, such as Pseudomonadota (7.63–41.10%), Bacteroidota (13.52–69.29%), and Verrucomicrobiota (38.26–104.81%). Functional prediction revealed that the abundances of dominant pathways (such as chemoheterotrophy, aerobic chemoheterotrophy, and nitrogen fixation) was enhanced following both treatments. Mantel analysis further indicated strengthened correlations among soil nutrients, enzyme activities, and bacterial communities, particularly under magnetic field treatment. These findings demonstrate that electric and magnetic field applications effectively facilitate nutrient cycling, stimulate enzyme activities, and optimize microbial community structure, thereby improving soil ecological functions and overall quality in rocky desertification regions, highlighting their potential for ecological restoration in karst areas. Full article

Portable devices are powered in direct current (DC) or by batteries (primary battery), accumulators (secondary battery), and now supercapacitors, which can also be used for energy storage. The European Portable Battery Association states that approximately 239,000 tons of batteries were placed on the market in the European Economic Area (EEA) plus Switzerland in 2022. Even if they were all disposed of correctly respecting the 3R paradigm (Reduce, Reuse and Recycle), non-rechargeable batteries create an environmental problem because they do not discharge completely with an obvious waste of energy. Secondary batteries and supercapacitors can be recharged because they use reversible chemical/physical processes while primary batteries cannot be recharged because they are based on irreversible redox reactions; nevertheless, it is possible to try to recover their residual charge if this is higher than a threshold beyond which the reactions can be reversible. The most used batteries are alkaline zinc/manganese dioxide and they are non-rechargeable; an inappropriate recharge attempt can lead to serious harm to the operator and the environment. This paper describes a simple Arduino-based circuit and the protocol to measure and graph the residual charge of an alkaline battery in order to establish if it can be recharged. The circuit, design, the Arduino Uno R3 sketch (i.e., microprocessor software) and the full protocol are here presented under the open source license (Copyright Creative Commons Public license, CC BY-NC-ND 4.0 EN) so that they could become a pilot system and then a commercial product. The residual charge of 158 batteries, obtained after discharging those that, by eye, appeared damaged, was measured. Results evidenced that 49% of batteries had a residual voltage, under low load, between 1.2 and 1.6 V, making them good candidates for a recharge attempt. Full article

Overcoming the inherent permeability–selectivity trade−off is essential to broaden the practical application of polyamide (PA) reverse osmosis (RO) membranes in brackish water desalination. In this study, we developed a facile and cost-effective alkaline (NaOH) post-treatment method to fabricate high−performance loose-structured RO membranes. The NaOH post−treatment hydrolyzed part of the amide bonds within the membrane, converting them to negatively charged carboxyl groups. This process led to a slight increase in pore size and the formation of a looser structure. Molecular weight cut−off (MWCO) measurements confirmed that the pore size slightly increased from 0.19 nm to 0.21 nm, while X−ray photoelectron spectroscopy (XPS) and zeta potential measurements confirmed the conversion of amide bonds to carboxyl groups, which further enhanced the surface electronegativity. The synergistic effects of pore size enlargement and surface charge modification were elucidated as the key mechanisms for performance enhancement. The TPA membrane exhibited a 2−fold increase in water permeance (from 1.05 to 3.21 L m⁻² h⁻¹ bar⁻¹), while the enhanced surface negative charge contributed to maintaining a high NaCl rejection of 98.5%. Additionally, the membrane also exhibited excellent pH stability as well as long-term stability over 100 h of continuous operation. This easily scalable post−treatment strategy offers a low−cost route to fabricate loose-structured membranes, with significant potential to enhance efficiency and reduce costs in brackish water desalination. Full article

Bone tissue engineering requires biomaterials capable of simultaneously supporting regeneration and preventing infection. Platelet-rich fibrin (PRF) has been widely used due to its autologous origin and growth factor release, but its rapid resorption limits its clinical applications. Albumin-PRF (Alb-PRF) membranes were developed to improve stability, and their combination with carbonated nanostructured hydroxyapatite (nCHA) may further reinforce osteoconductive properties. In this proof-of-concept study, we fabricated Alb-PRF, Alb-nCHA-PRF, and Alb-nCHA-PRF + doxycycline (DOX) membranes and characterized their physicochemical, antimicrobial, and biological performance in vitro. Membrane stability was monitored for up to 14 days; DOX incorporation and release were evaluated by autofluorescence and spectrophotometry; antimicrobial activity was assessed against E. faecalis and S. aureus; and MG-63 osteoblast-like cells were used to test cytocompatibility, proliferation, mineralization, and alkaline phosphatase (ALP) activity. The release of 27 cytokines and growth factors was quantified by multiplex immunoassay. Alb-PRF exhibited morphological integrity and an enhanced trophic secretome, and supported proliferation and late mineralization. nCHA incorporation reduced cell proliferation and secretome output, while DOX conferred sustained antibacterial activity and enhanced early ALP expression even with attenuated cytokine release, positively impacting mineralization, when compared to nCHA alone. These preliminary results provide preliminary feasibility evidence that Alb-PRF can be engineered as a multifunctional scaffold combining antimicrobial and regenerative functions, though some trade-offs indicate the need for dose optimization and validation with in vivo models. Full article

Microplastics (MPs) pose a significant threat to soil ecosystems based on their small size and resistance to biodegradation. Soil organic carbon (SOC) in saline–alkaline ecosystems has significantly affected maintain the ecological balance. This paper aims to review the mechanisms underlying the influence of MPs on SOC in saline–alkaline soils combining bibliometric mapping (VOSviewer). The results revealed that: (1) MPs mainly enter the saline–alkaline soil through water irrigation, sewage sludge, and agricultural films. (2) The interaction between the salt ions in saline–alkaline soils and the negatively charged surface of MPs will intensify the dispersion of soil aggregates, resulting in a significant decline in soil structure stability and nutrient imbalance. (3) MPs and the high-salt environment of saline–alkaline soils form a synergistic stress, significantly reducing the activities of key enzymes such as catalase and dehydrogenase in the soil, and it selectively promotes the enrichment of salt-tolerant bacterial communities (such as Halomonas and Bacillus species). (4) Using biodegradable plastic materials, setting up ecological buffer zones and planting halophytic plants (in coastal saline–alkaline areas), adding windbreak and sand-fixing buffer zones (in inland desert-type saline–alkaline areas), promoting precise irrigation and fertilization technologies (in areas with uneven irrigation conditions), and emergency soil amendment treatment (for severely polluted and ecologically fragile saline–alkaline soils) were all effective measures to dealing with the MPs pollution in saline–alkaline soils. This review provides a theoretical basis for the prevention and control of MPs pollution and the sustainable use of saline–alkaline soils. Full article

Fish oil (FO) has been shown to confer beneficial effects on hepatic diseases in both humans and animals. This study aimed to investigate whether dietary fish oil (FO) supplementation alleviates deoxynivalenol (DON)-induced liver injury by modulating the ferroptosis signaling pathway in weaned piglets. Twenty-four weaned piglets were allocated to a 2 × 2 factorial design, with the main factors consisting of dietary treatment (5% corn oil or 5% FO supplementation) and DON exposure (basal diet or diet contaminated with 4 mg/kg DON). After 21 days of dietary treatment, piglets were euthanized for collection of blood and liver samples. Dietary FO significantly attenuated DON-induced hepatic structural damage and inflammatory infiltration. Specifically, FO supplementation reduced the activities of aspartate transaminase (AST) and alkaline phosphatase (ALP), as well as the AST/alanine aminotransferase (ALT) ratio following DON exposure. Dietary FO also decreased malondialdehyde (MDA) concentrations in both the liver and serum, lowered hepatic 4-hydroxynonenal (4-HNE) level and Fe²⁺ content, and increased hepatic glutathione (GSH) content. Moreover, dietary FO ameliorated ultrastructural liver damage induced by DON. Furthermore, DON significantly downregulated the mRNA levels of multiple genes associated with iron metabolism and ferroptosis, including heat shock protein beta-1 (HSPB1), acyl-CoA synthetase long chain family member 4 (ACSL4), and arachidonate 15-lipoxygenase (ALOX15), and upregulated the mRNA levels of transferrin (TF), ferritin heavy chain (FTH), solute carrier family 7 member 11 (SLC7A11), and transferrin receptor 1 (TFR1). Dietary FO counteracted these alterations by decreasing the mRNA of SLC7A11, TFR1, FTH, and TF after DON exposure. Finally, FO significantly decreased the protein expression of SLC7A11, iron-responsive element-binding protein 2 (IREB2), and FHT1 and increased the GPX4 protein expression following DON exposure. These findings suggest that FO may ameliorate DON-induced liver injury in weaned piglets, possibly through suppressing the ferroptosis signaling pathway. Full article

To improve the economic efficiency and reliability of off-grid renewable energy hydrogen production systems, this paper proposes an integrated optimal variable temperature operation strategy for multi-electrolyzer systems. This paper develops a unified optimization model that deeply integrates the electro-thermal characteristics and dynamic operational states of multiple alkaline water electrolyzers. By actively regulating the operating temperature and optimizing power allocation, the strategy significantly improves economic efficiency under fluctuating power inputs. Furthermore, a collaborative dispatch principle is introduced to ensure balanced aging across the electrolyzer cluster. Simulation results based on real-world wind and solar data demonstrate that compared to traditional rule-based methods, the proposed strategy increases the monthly net profit by up to 14.6% and significantly reduces the frequency of cold and hot starts by 51.21% and 89.41%, respectively. This research provides an efficient and reliable technical framework for the collaborative management of large-scale green hydrogen infrastructure. Full article

The accumulation of highly alkaline red mud poses serious environmental risks due to land occupation and potential soil/groundwater contamination. Recycling red mud as a secondary resource offers an eco-friendly solution, yet its influence on the performance of high-performance mortar (HPM) remains incompletely understood, particularly in aggressive environments. This study aims to systematically evaluate the effects of red mud on the fresh and hardened properties of HPM, including rheological parameters, setting time, mechanical strength, drying shrinkage, and sulfate dry–wet erosion resistance. The novelty lies in (1) quantifying the nonlinear relationships between red mud content and rheological/setting behaviors, (2) revealing the dual effect of red mud with curing age, and (3) using XRD/SEM-EDS to elucidate the micro-mechanisms related to hydration products and elemental changes (Al and Fe). The results show that increasing red mud content reduces slump flow (max 76.03%), plastic viscosity (46.7%), and yield stress (42.3%) while also shortening initial/final setting times (67.91% and 76.18% max reductions). At curing ages below 7 days, flexural and compressive strength increase (up to 64.53% and 33.35%, respectively), following cubic functions; however, at 7 and 28 days, both strength values decrease (max reductions of 13.43% and 12.98%). Red mud increases drying shrinkage and delays sulfate-induced degradation. Microstructural analysis reveals improved compactness of hydration products at early ages but reduced compactness at later ages, accompanied by increased Al/Fe content and enhanced SiO₂/calcium silicate hydrate crystals. These findings provide valuable insights for applying red mud HPM in marine environments. Full article

The efficient removal of dyes and separation from dissolved salts are crucial for the recovery of valuable resources from saline textile wastewater. In this study, hollow fiber membranes were fabricated using the non-solvent-induced phase separation (NIPS) method and then improved with a dual-coating process to create effective nanofiltration (NF) membranes. First, hollow fiber substrates with Fe³⁺ were fabricated using NIPS. Subsequently, the inner surface of the membrane was coated with phytic acid (PA) and polyethyleneimine (PEI), which increased the thickness of the separation layer and reduced the size of the surface pores, thereby improving the separation efficiency. The loose NF membrane exhibited superior water permeance (pure water permeability of 280 L·m⁻²·h⁻¹·bar⁻¹) and, with dye rejection rates consistently exceeding 95%, also remarkable dye/salt selectivity (with separation factors of CR/NaCl: 64.08, CR/Na₂SO₄: 21.21, CBB/NaCl: 14.75, and CBB/Na₂SO₄: 10.74). The flux recovery of the membrane was over 80% for humic acid, and the membrane exhibited favorable stability under acidic and alkaline conditions, confirming its excellent antifouling and stability performance. In conclusion, this study presents a straightforward and effective approach for fabricating hollow fiber loose NF membranes, underscoring their potential for treating hypersaline wastewater and resource recovery. Full article

Brazilian soils are prone to a gradual decline in fertility due to intensive agricultural activity combined with natural weathering, which increases the demand for chemical fertilizers. Among potential alternatives, soil remineralization using crushed rock is a promising strategy. Silicate agrominerals (SAs) applied as soil remineralizers have attracted attention due to their ability to supply plant-available nutrients while reducing dependence on conventional mineral fertilizers. This study evaluated the potential of residues from six quarries in Brazil as soil remineralizers as a regulatory screening assessment. Samples were subjected to mineralogical, petrological, and chemical characterization using an integrated approach, including X-ray diffraction (XRD), Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), and leaching experiments. XRD analysis revealed that anorthite and augite were the major minerals present in the mining waste. These minerals are less resistant to weathering, which enhances the release of macro- and micronutrients, essential for the development of various crops. Chemically, the samples were dominated by SiO₂, Fe₂O₃, and Al₂O₃, with the sum of bases (K₂O + CaO + MgO) ranging from 11.92% to 16.85%, meeting Brazilian standards for use as a soil remineralizer. Leaching results revealed that pH responses varied significantly among the studied samples for the filler particles, with an alkaline shift reaching values above 9.0 after 72 h. In contrast, the powder particle size samples showed no significant variation between the different materials tested, maintaining nearly constant pH levels throughout the period. This preliminary evaluation demonstrates that mining tailings from Brazilian quarries have potential as a sustainable soil remineralizer. This approach not only offers an alternative for soil fertilization but also promotes waste management and circular economy practices, although further studies are needed to assess long-term effectiveness and safety. Full article

Population growth and rapid urbanization have significantly increased construction activities and the demand for building materials. It is estimated that approximately 39% of global CO₂ emissions are associated with the construction sector, with nearly 8% directly attributed to Portland cement production. In addition to greenhouse gas emissions, the cement industry is responsible for substantial environmental impacts, including natural resource depletion, soil degradation, and air and water pollution. In this context, the development of alternative and more sustainable binder systems has become a global research priority. Geopolymers have emerged as promising materials produced through either alkaline or acid activation routes, offering advantages such as a reduced carbon footprint, high durability, and rapid strength development. Among these systems, acid-activated materials, particularly phosphate-based geopolymers, differ fundamentally from conventional alkali-activated binders in terms of reaction chemistry and binding phases. The formation of aluminum phosphate (AlPO₄) networks plays a key role in governing the mechanical performance and microstructural stability of these materials. This mini-review provides a critical overview of the fundamental principles of acid activation applied to alternative cementitious materials, with emphasis on dissolution mechanisms, polycondensation reactions, and the nature of binding phases in phosphate-based systems. Unlike previous reviews, this study integrates recent findings on reaction mechanisms with a comparative analysis between acid and alkaline activation routes, highlighting underexplored aspects of precursor reactivity and binder formation. The main types of acids used as activators, the influence of precursor chemical composition, and the conceptual differences between acid and alkaline activation are discussed. In addition, recent advances, current challenges, and future perspectives of acid activation are addressed, highlighting its potential as a viable low-carbon binder route for sustainable construction materials, with strong prospects for partially replacing Portland cement, particularly in high-performance applications requiring enhanced chemical resistance and thermal stability. Full article

Qiangduo Tibetan paper is a typical intangible cultural heritage in the Shangri-La region of Yunnan, China, mainly handmade from two local fibrous plants, Stellera chamaejasme and Wikstroemia canescens. This study focuses on the correlations among its surface properties, water absorption and dry heat durability, which are critical for heritage conservation. Four paper samples (Z1–Z4) were investigated via micromorphology, physicochemical property testing and dry heat aging (105 °C, 216 h). The results show that the two raw materials lead to distinct fiber and pore structures: Stellera chamaejasme paper has coarser fibers and loose pores, while Wikstroemia canescens paper has finer and denser fibers. All samples present a near-neutral to weakly alkaline pH (6.87–7.56) and favorable water absorption, jointly regulated by fiber structure and alkaline wood ash fillers. After dry heat aging, all samples undergo whiteness loss, tensile index decay and slight acidification, with extremely significant changes (p < 0.001). Notably, Stellera chamaejasme paper exhibits much higher aging resistance, with whiteness and tensile index retention reaching 77.97%–93.07% and 71.46%–74.77% respectively, far superior to Wikstroemia canescens paper. The mechanism lies in the high flavonoid content and low lignin level in Stellera chamaejasme fibers, which enhance antioxidant stability and reduce yellowing, whereas the opposite composition accelerates degradation in Wikstroemia canescens paper. This study provides a scientific basis for the conservation, inheritance and targeted application of Qiangduo Tibetan paper, supports the sustainable protection of handmade paper cultural relics, and enriches the application of surface science in cultural heritage conservation. Full article