Search Results (29)

Background/Objectives: Early diagnosis and oral or, in severe cases, intravenous antibiotics are usually effective for Lyme disease, but some patients have persistent symptoms unresponsive to standards of care, requiring alternative therapies. Disulfiram (DIS), a drug for alcoholism, is under investigation as a potential adjunctive treatment, but its low bioavailability, rapid metabolism, and safety concerns urge the development of improved formulations for clinical translation. Methods: Screening dissolution and permeation studies were investigated for vehicle and excipient selection, following the pharmacopeia perspectives to develop and optimize the low-dose DIS rectal suppository intended for application in post-treatment Lyme disease syndrome (PTLDS). Further characterizations were carried out by differential scanning calorimetry, X-ray diffraction, and infrared spectroscopy. Results: Cyclodextrin (CD) encapsulation was investigated to improve the aqueous solubility of the hydrophobic drug. The dissolution of DIS from fatty base suppository was very slow; it was remarkably improved by the molecular encapsulation of the drug with CDs. The dissolution of DIS from a water-soluble base was more favorable, but incomplete. In the polyethylene glycol (PEG) based suppositories, the addition of CDs already in a physical mixture ensured the dissolution of the drug. The presented drug delivery system relates to a novel preparation for rectal administration comprising a low-dose disulfiram with improved solubility and permeability by the PEG and hydroxypropyl-β-cyclodextrin (HPBCD) synergistic matrix. Conclusions: The rectal dosage form containing the drug and CD in the physical mixture is advantageous, avoiding the hepatic first-pass effect, minimizing dose-limiting toxicity, simplifying production, and fasting the availability of the repositioned drug. Full article

Transmucosal drug products, such as aerosols, films, semisolids, suppositories, and tablets, have been developed for the treatment of various human diseases and conditions. Transmucosal drug absorption is highly influenced by the biological structures of the mucosa and the physiological environment specific to the administration route (e.g., nasal, rectal, and vaginal). Over the last few decades, in vitro permeation testing (IVPT) using animal tissues or in vitro cell cultures have been utilized as a cost-effective and efficient tool for evaluating drug release and permeation behavior, assisting in formulation development and quality control of transmucosal drug delivery systems. This review summarizes the key mucosal permeation barriers associated with representative transmucosal administration routes, as well as considerations for IVPT method development. It highlights various IVPT methods, including vertical diffusion cell, flow-through diffusion cell, Ussing chamber, and transwell systems. Additionally, future perspectives are discussed, such as the use of optical methods to study in vitro drug permeation and the development of in vitro–in vivo correlation (IVIVC) for transmucosal drug development. The potential of IVPT as part of in vitro bioequivalence assessment strategies for locally acting transmucosal drug products is also highlighted. Full article

Objectives: This study aims to create an innovative self-microemulsifying drug delivery system (SMEDDS) suppository for ibuprofen (IBU) using semisolid extrusion (SSE) three-dimensional (3D) printing technology. Methods: Based on solubility studies and the ability to form a transparent microemulsion upon dilution, a selected oil, surfactant, and co-surfactant were utilized to prepare SMEDDS-3DPS containing IBU. The optimal formulation consisted of 10% Triacetin, 80% Gelucire 48/16, and 10% Tetraethylene glycol. SSE 3D printing was employed to create three different-sized suppositories with varying drug contents. These suppositories were assessed for their physicochemical properties, content uniformity, and dissolution profiles. Results: The prepared mixture exhibited suitable physical properties for printing, with nano-sized emulsion droplets providing a large surface area for improved drug absorption in the rectum. Characterization techniques such as differential scanning calorimetry, powder X-ray diffraction, and Fourier transform infrared spectroscopy indicated that IBU was present in the formulation in an amorphous state. Additionally, in vitro dissolution tests demonstrated that SMEDDS-3DPS had a significantly higher initial dissolution rate compared with IBU powder. Conclusions: This research suggests that SMEDDS-3DPS, as a rectal IBU dosage form, can enhance the rectal bioavailability of IBU. It demonstrates the versatility of 3D printing as a novel manufacturing method for lipid-based suppositories and highlights the simplicity and adaptability of SSE 3D printing technology in producing customized suppositories tailored to individual patient needs, surpassing traditional methods. Full article

Background: Inflammatory bowel disease (IBD), characterized by chronic inflammation of the digestive tract, involves angiogenesis as a key pathogenic mechanism. Ginsenoside Rg3, derived from the traditional Chinese herb ginseng, is recognized for its anti-angiogenic properties but is limited by low oral bioavailability. This necessitates the development of an alternative delivery system to improve its therapeutic effectiveness. Methods: Pluronic F-127 (F127) and Pluronic F-68 (F68) were used to construct Rg3-loaded thermosensitive hydrogel Gel-Rg3. Meanwhile, a series of physicochemical properties were determined. Then the safety and pharmacological activity of Gel-Rg3 were evaluated in vitro and in vivo using human umbilical vein endothelial cells (HUVECs) and colitis mouse model, in order to initially validate the potential of Gel-Rg3 for the treatment of IBD. Results: We engineered a rectally administrable, thermosensitive Gel-Rg3 hydrogel using F127 and F68, which forms at body temperature, enhancing Rg3’s intestinal retention and slowly releasing the drug. In vitro, Gel-Rg3 demonstrated superior anti-angiogenic activity by inhibiting HUVEC proliferation, migration, and tube formation. It also proved safer and better suited for IBD’s delicate intestinal environment than unformulated Rg3. In vivo assessments confirmed increased intestinal adhesion and anti-angiogenic efficacy. Conclusions: The Gel-Rg3 hydrogel shows promise for IBD therapy by effectively inhibiting angiogenesis via rectal delivery, overcoming Rg3’s bioavailability limitations with improved safety and efficacy. This study provides new inspiration and data support for the design of treatment strategies for IBD. Full article

The present research emphasizes fabrication alongside the assessment of an innovative nano-vesicular membranous system known as invasomes (NVMs) laden with Mirtazapine for rectal administration. This system could circumvent the confines of orally administered counterparts regarding dose schedules and bioavailability. Mirtazapine invasomes were tailored by amalgamating phospholipid, cineole, and ethanol through a thin-film hydration approach rooted in the Box–Behnken layout. Optimization of composition parameters used to fabricate desired NVMs’ physicochemical attributes was undertaken using the Design-Expert^® program. The optimal MRZ-NVMs were subsequently transformed to a pH-triggered in situ rectal gel followed by animal pharmacodynamic and pharmacokinetic investigations relative to rectal plain gel and oral suspension. The optimized NVMs revealed a diameter size of 201.3 nm, a z potential of −28.8 mV, an entrapment efficiency of 81.45%, a cumulative release within 12 h of 67.29%, and a cumulative daily permeated quantity of 468.68 µg/cm². Compared to the oral suspension, pharmacokinetic studies revealed a 2.85- and 4.45-fold increase in calculated rectal bioavailability in circulation and brain, respectively. Pharmacodynamic and immunohistopathology evaluations exposed superior MRZ-NVMs attributed to the orally administered drug. Consequently, rectal MRZ-NVMs can potentially be regarded as a prospective nanoplatform with valuable pharmacokinetics and tolerability assets. Full article

HIV/AIDS remains a global public health issue, and products available for the prevention of HIV infections are limited, especially those for short-acting, on-demand, user-controlled applications. Topical inserts are products that can be applied vaginally or rectally and have been explored as drug delivery systems. To fill the gap in the HIV prevention product pipeline, CONRAD has developed a topical insert containing tenofovir alafenamide fumarate (TAF) and elvitegravir (EVG), two potent and synergistic antiretrovirals, as a simple, low-cost, and discreet option that can be self-administered vaginally and/or rectally, before and after coitus. In this review, we have described the development path of the TAF/EVG insert up to its current point in clinical testing, highlighting findings from acceptability, preclinical safety, pharmacokinetics, and efficacy evaluations and early clinical studies. In summary, the TAF/EVG inserts are stable, easy to manufacture, low-cost, acceptable, and show highly promising preclinical and clinical results for on-demand topical pre- or post-exposure HIV prevention. Full article

Rectal drug administration could offer advantages in the delivery of medicines for children by avoiding swallowability issues, improving stability and enabling administration by caregivers. This study aimed to evaluate the rectal bioavailability of hollow-type suppositories (HTS) and understand the effect of two chemical forms of amoxicillin: amoxicillin sodium (AS) or amoxicillin trihydrate (AMT). HTS were prepared by incorporating a lipophilic core containing the antibiotic with a polyethylene glycol (PEG) shell. Formulations were characterised in vitro, and the absolute bioavailability was determined in a rabbit model, while drug–base interactions were evaluated using X-ray diffraction crystallography (XRD), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy. The in vitro amoxicillin release from AMT HTS was delayed, taking 27.3 ± 4.9 h to release 50% drug compared with 1.7 h for the AS HTS, likely due to solubility differences between AMT and AS. The presence of orthorhombic AMT and anhydrous AS crystals in respective HTS was confirmed via XRD and DSC. PEG shells were able to protect the drug chemical stability when stored at 25 °C/60% RH. Despite the difference in their in vitro release rates, a similar rectal bioavailability was found in both forms of amoxicillin (absolute bioavailability 68.2 ± 6.6% vs. 72.8 ± 32.2% for AMT HTS and AS HTS, respectively; p = 0.9682). Both HTS formulations showed little or no irritation to the rectal mucosa following a single dose. Full article

3D printing technology in medicine is gaining great attention from researchers since the FDA approved the first 3D-printed tablet (Spritam^®) on the market. This technique permits the fabrication of various types of dosage forms with different geometries and designs. Its feasibility in the design of different types of pharmaceutical dosage forms is very promising for making quick prototypes because it is flexible and does not require expensive equipment or molds. However, the development of multi-functional drug delivery systems, specifically as solid dosage forms loaded with nanopharmaceuticals, has received attention in recent years, although it is challenging for formulators to convert them into a successful solid dosage form. The combination of nanotechnology with the 3D printing technique in the field of medicine has provided a platform to overcome the challenges associated with the fabrication of nanomedicine-based solid dosage forms. Therefore, the major focus of the present manuscript is to review the recent research developments that involved the formulation design of nanomedicine-based solid dosage forms utilizing 3D printing technology. Utilization of 3D printing techniques in the field of nanopharmaceuticals achieved the successful transformation of liquid polymeric nanocapsules and liquid self-nanoemulsifying drug delivery systems (SNEDDS) to solid dosage forms such as tablets and suppositories easily with customized doses as per the needs of the individual patient (personalized medicine). Furthermore, the present review also highlights the utility of extrusion-based 3D printing techniques (Pressure-Assisted Microsyringe—PAM; Fused Deposition Modeling—FDM) to produce tablets and suppositories containing polymeric nanocapsule systems and SNEDDS for oral and rectal administration. The manuscript critically analyzes contemporary research related to the impact of various process parameters on the performance of 3D-printed solid dosage forms. Full article

Colorectal cancer is occasionally called colon or rectal cancer, depending on where cancer begins to form, and is the second leading cause of cancer death among both men and women. The platinum-based [PtCl(8-O-quinolinate)(dmso)] (8-QO-Pt) compound has demonstrated encouraging anticancer activity. Three different systems of 8-QO-Pt-encapsulated nanostructured lipid carriers (NLCs) with riboflavin (RFV) were investigated. NLCs of myristyl myristate were synthesized by ultrasonication in the presence of RFV. RFV-decorated nanoparticles displayed a spherical shape and a narrow size dispersion in the range of 144–175 nm mean particle diameter. The 8-QO-Pt-loaded formulations of NLC/RFV with more than 70% encapsulation efficiency showed sustained in vitro release for 24 h. Cytotoxicity, cell uptake, and apoptosis were evaluated in the HT-29 human colorectal adenocarcinoma cell line. The results revealed that 8-QO-Pt-loaded formulations of NLC/RFV showed higher cytotoxicity than the free 8-QO-Pt compound at 5.0 µM. All three systems exhibited different levels of cellular internalization. Moreover, the hemotoxicity assay showed the safety profile of the formulations (less than 3.7%). Taken together, RFV-targeted NLC systems for drug delivery have been investigated for the first time in our study and the results are promising for the future of chemotherapy in colon cancer treatment. Full article

Muco-adhesive drug delivery systems continue to be one of the most studied for controlled pharmacokinetics and pharmacodynamics. Briefly, muco-adhesive polymers, can be described as bio-polymers that adhere to the mucosal (mucus) surface layer, for an extended residency period of time at the site of application, by the help of interfacial forces resulting in improved drug delivery. When compared to traditional drug delivery systems, muco-adhesive carriers have the potential to enhance therapeutic performance and efficacy, locally and systematically, in oral, rectal, vaginal, amongst other routes. Yet, the achieving successful muco-adhesion in a novel polymeric drug delivery solution is a complex process involving key physico-chemico-mechanical parameters such as adsorption, wettability, polymer chain length, inter-penetration and cross-linking, to list a few. Hence, and in light of accruing progress, evidence and interest, during the last decade, this review aims to provide the reader with an overview of the theories, principles, properties, and underlying mechanisms of muco-adhesive polymers for pharmaceutics; from basics to design to characterization to optimization to evaluation to market. A special focus is devoted to recent advances incorporating bio-inspired polymers for designing controlled muco-adhesive drug delivery systems. Full article

According to the WHO, cancer caused almost 10 million deaths worldwide in 2020, i.e., almost one in six deaths. Among the most common are breast, lung, colon and rectal and prostate cancers. Although the diagnosis is more perfect and spectrum of available drugs is large, there is a clear trend of an increase in cancer that ends fatally. A major advance in treatment was the introduction of gentler antineoplastics for targeted therapy–tyrosine kinase inhibitors (TKIs). Although they have undoubtedly revolutionized oncology and hematology, they have significant side effects and limited efficacy. In addition to the design of new TKIs with improved pharmacokinetic and safety profiles, and being more resistant to the development of drug resistance, high expectations are placed on the reformulation of TKIs into various drug delivery lipid-based nanosystems. This review provides an insight into the history of chemotherapy, a brief overview of the development of TKIs for the treatment of cancer and their mechanism of action and summarizes the results of the applications of self-nanoemulsifying drug delivery systems, nanoemulsions, liposomes, solid lipid nanoparticles, lipid-polymer hybrid nanoparticles and nanostructured lipid carriers used as drug delivery systems of TKIs obtained in vitro and in vivo. Full article

The rectal route is an effective route for the local and systemic delivery of active pharmaceutical ingredients. The environment of the rectum is relatively constant with low enzymatic activity and is favorable for drugs having poor oral absorption, extensive first-pass metabolism, gastric irritation, stability issues in the gastric environment, localized activity, and for drugs that cannot be administered by other routes. The present review addresses the rectal physiology, rectal diseases, and pharmaceutical factors influencing rectal delivery of drugs and discusses different rectal drug delivery systems including suppositories, suspensions, microspheres, nanoparticles, liposomes, tablets, and hydrogels. Clinical trials on various rectal drug delivery systems are presented in tabular form. Applications of different novel drug delivery carriers viz. nanoparticles, liposomes, solid lipid nanoparticles, microspheres, transferosomes, nano-niosomes, and nanomicelles have been discussed and demonstrated for their potential use in rectal administration. Various opportunities and challenges for rectal delivery including recent advancements and patented formulations for rectal drug delivery have also been included. Full article

Although various local anti-inflammatory therapies for ulcerative colitis have been developed, rapid drug elimination from inflamed colitis tissue and off-target side effects reduce their therapeutic efficacy. In this study, we synthesized curcumin (Cur)-loaded hyaluronic acid (HA)-conjugated nanoparticles (Cur-HA-PLGA-NPs) that target inflamed colitis tissue via HA-CD44 interaction with resident colonic epithelial cells and subsequently target activated macrophages for ulcerative colitis therapy. The synthesized spherical Cur-HA-PLGA-NPs showed physicochemical properties similar to those of non-HA-conjugated Cur-PLGA-NPs. HA-PLGA-NPs exhibited selective accumulation in inflamed colitis tissue with minimal accumulation in healthy colon tissue. HA functionalization enhanced targeted drug delivery to intestinal macrophages, significantly increasing HA-PLGA-NP cellular uptake. Importantly, the rectal administration of Cur-HA-PLGA-NPs exhibited better therapeutic efficacy than Cur-PLGA-NPs in animal studies. Histological examination revealed that Cur-HA-PLGA-NPs reduced inflammation with less inflammatory cell infiltration and accelerated recovery with re-epithelialization signs. Our results suggest that Cur-HA-PLGA-NPs are a promising delivery platform for treating ulcerative colitis. Full article

Dead space after rectal resection in colorectal surgery is an area with a high risk of complications. In this study, our goal was to develop a novel 3D implant based on composite hydrogels enriched with fractionalized nanofibers. We employed, as a novel approach in abdominal surgery, the application of agarose gels functionalized with fractionalized nanofibers on pieces dozens of microns large with a well-preserved nano-substructure. This retained excellent cell accommodation and proliferation, while nanofiber structures in separated islets allowed cells a free migration throughout the gel. We found these low-concentrated fractionalized nanofibers to be a good tool for structural and biomechanical optimization of the 3D hydrogel implants. In addition, this nano-structuralized system can serve as a convenient drug delivery system for a controlled release of encapsulated bioactive substances from the nanofiber core. Thus, we present novel 3D nanofiber-based gels for controlled release, with a possibility to modify both their biomechanical properties and drug release intended for 3D lesions healing after a rectal extirpation, hysterectomy, or pelvic exenteration. Full article

Nowadays, polyethylene glycols referred to as PEGs are widely used in cosmetics, consumer care products, and the pharmaceutical industry. Their advantageous properties such as chemical stability, low immunogenicity, and high tolerability explain why PEGs are applied in many fields of pharmaceutical formulations including parenteral, topical, ophthalmic, oral, and rectal preparations and also in modern drug delivery systems. Given their extensive use, they are considered a well-known group of chemicals. However, the number of large-scale comparative studies involving multiple PEGs of wide molecular weight range is low, as in most cases biological effects are estimated upon molecular weight. The aim of this publication was to study the action of PEGs on Caco-2 cells and G. mellonella larvae and to calculate the correlation of these effects with molecular weight and osmolality. Eleven PEGs of different molecular weight were used in our experiments: PEG 200, PEG 300, PEG 400, PEG 600, PEG 1000, PEG 1500, PEG 4000, PEG 8000, PEG 10,000, 12,000, and PEG 20,000. The investigated cellular effects included cytotoxicity (MTT and Neutral Red assays, flow cytometry with propidium iodide and annexin V) and autophagy. The osmolality of different molecular weight PEGs with various concentrations was measured by a vapor pressure osmometer OSMOMAT 070 and G. mellonella larvae were injected with the solutions of PEGs. Sorbitol was used as controls of the same osmolality. Statistical correlation was calculated to describe the average molecular weight dependence of the different measured effects. Osmolality, the cytotoxicity assays, flow cytometry data, and larvae mortality had significant correlation with the structure of the PEGs, while autophagosome formation and the proportion of early apoptotic cells showed no statistical correlation. Overall, it must be noted that PEGs must be tested individually for biological effects as not all effects can be estimated by the average molecular weight. Full article