Search Results (10)

Polyurethane foam (PF) is a versatile polymer widely used in various applications. By changing the composition of polyol and isocyanate, these foams can be classified into rigid polyurethane foams (PUFRs) and flexible polyurethane foams (PUFFs). The flexible polyurethane foam (PUFFs) is well known for its sound absorption capacities; nevertheless, its flammability poses significant safety hazards. The purpose of this study is to look into how flexible polyurethane foam reacts to fire, specifically its combustion properties, and the risks that come with them. The study aims to find out the rates of horizontal and vertical burning, the make-up of the reaction products, and the temperatures that build up inside the polyurethane foam mass when a support pole is placed in front of the stage and sound-absorbing material is added to stop stage sounds from reverberating. There were performed experiments to determine the fire behavior of the samples in contact with an ignition source in the form of a small flame and experiments to determine the ignition temperature of the sound-absorbing sponge, where it was found that vertical position accelerates combustion, and in practical applications, this aspect must be considered for fire prevention. To determine the combustion gases, several methods were used, namely spectrophotometric, ion chromatography, and gas-chromatographic methods. Analysis of the gases resulting from the combustion of the sound-absorbing sponge indicates the presence of dangerous toxic compounds (hydrogen cyanide, carbon monoxide, and hydrochloric acid), which can endanger human health in the event of a fire. Full article

Coal-to-liquid technology is a key technology to ensuring national energy security, with the Fischer–Tropsch synthesis process at its core. However, in actual production, Fischer–Tropsch wax residue exhibits the characteristics of spontaneous combustion due to heat accumulation, posing a fire hazard when exposed to air for extended periods. This significantly threatens the safe production operations of coal-to-liquid chemical enterprises. This study primarily focuses on the experimental investigation of the oxidative spontaneous combustion process of three typical types of wax residues produced during Fischer–Tropsch synthesis. Differential Scanning Calorimetry (DSC) was used to test the thermal flow curves of the three wax residue samples. Kinetic analysis was performed using the Kissinger–Akahira–Sunose (KAS) and Flynn–Wall–Ozawa (FWO) methods to calculate their apparent activation energy. This study analyzed the thermal behavior characteristics, exothermic properties, and kinetic parameters of three typical wax residue samples, exploring the ease of reaction between wax residues and oxygen and their tendency for spontaneous combustion. The results indicate that Wax Residue 1 is rich in low-carbon chain alkanes and olefins, Wax Residue 2 contains relatively fewer low-carbon chain alkanes and olefins, while Wax Residue 3 primarily consists of high-carbon chain alkanes and olefins. This leads to different thermal behavior characteristics among the three typical wax residue samples, with Wax Residue 1 having the lowest heat release and average apparent activation energy and Wax Residue 3 having the highest heat release and average apparent activation energy. These findings suggest that Wax Residue 1 has a higher tendency for spontaneous combustion. This research provides a scientific basis for the safety management of the coal chemical industry, and further exploration into the storage and handling methods of wax residues could reduce fire risks in the future. Full article

To broaden the applications of wood, it is necessary to prepare flame-retardant coatings that can protect wood substrates during combustion. In this study, a bio-based, intumescent, flame-retardant phytic acid–melamine polyelectrolyte (PM) was prepared using phosphorus-rich biomass phytic acid and nitrogen-rich melamine as raw materials through an ion crosslinking reaction. Subsequently, a series of bio-based, flame-retardant wood coatings were prepared by optimizing the structure of urea–formaldehyde resin with the addition of melamine, sodium lignosulfonate, and PM as a flame-retardant curing agent. Woods coated with PM-containing coatings displayed significantly improved flame-retardant performances in comparison to uncoated woods. For PM-cured woods, the measured values of total heat release and total smoke production were 91.51% and 57.80% lower, respectively, compared with those of uncoated wood. Furthermore, the fire growth index decreased by 97.32%, indicating a lower fire hazard. This increase in flame retardancy and smoke suppression performance is due to the dense expanded carbon layer formed during the combustion of the coating, which isolates oxygen and heat. In addition, the mechanical properties of the flame-retardant coatings cured with PM are similar to those cured with a commercial curing agent, NH₄Cl. In addition, the prepared flame-retardant coating can also stain the wood. This study proves the excellent flame-retarding and curing effect of ammonium phytate in urea–formaldehyde resin coatings and provides a new approach for the application of bio-based flame retardants in wood coatings. Full article

Ladle slag, a byproduct of steel manufacturing, exhibits inherent reactivity and undergoes hydration when exposed to water. Nevertheless, these reaction byproducts often remain metastable, leading to microstructural alterations when incorporated into cementitious materials, thereby limiting the recycling potential of ladle slag. This study explores the fire insulating capacity and the physical, mechanical, and leaching characteristics of gypsum-based materials with substantial quantities of ladle slag in instead of gypsum. The mechanical strength of the specimens declines as the ladle slag content increases. Nevertheless, the percentage decrease in compressive strength at various temperatures (300 °C, 500 °C, and 700 °C) is less pronounced when higher amounts of ladle slag are used. Fire-resistant properties, assessed using the EN 1363-1 standards, diminish with increasing slag proportions; although the inclusion of ladle slag introduces certain endothermic processes that positively affect the fire insulating capacity, resulting in a 20% reduction when 60%wt of slag is employed. Notably, no gas emissions were observed during the fire test, indicating the absence of environmental hazards. In conclusion, ladle slag does not pose a leaching threat to the environment, making it a viable and sustainable alternative to gypsum in gypsum-based materials. Full article

Thermal behavior and fire reaction properties of aerial glass fiber (GF)/bismaleimide (BMI) composites were tested using thermogravimetric analysis (TGA), thermogravimetric coupled with Fourier transform infrared spectroscopy (TG-FTIR), cone calorimeter, limiting oxygen index, and smoke density chamber. The results showed that the pyrolysis process was one stage in a nitrogen atmosphere with the prominent volatile components of CO₂, H₂O, CH₄, NO_x, and SO₂. The release of heat and smoke increased with the increase in heat flux, while the time required to reach hazardous conditions decreased. The limiting oxygen index decreased monotonically from 47.8% to 39.0% with increasing experimental temperature. The maximum specific optical density within 20 min in the non-flaming mode was greater than that in the flaming mode. According to the four kinds of fire hazard assessment indicators, the greater the heat flux, the higher the fire hazard, for the contribution of more decomposed components. The calculations of two indices confirmed that the smoke release in the early stage of fire was more negative under flaming mode. This work can provide a comprehensive understanding of the thermal and fire characteristics of GF/BMI composites used for aircraft. Full article

Laminated glass is prominently used nowadays as building construction material in the façade and architectural glazing of high-rise buildings. On the other hand, the fire safety of the high-rise building with laminated glass is also receiving more attention from the fire safety regulatory authorities and researchers due to recent fire incidents. Different interlayer polymeric materials are used in modern laminated glass to prevent the breakage of the glass façade, which can also increase the fire risk through a lower ignition time, and higher heat release and smoke production. Therefore, further research is required to understand the fire behaviour of laminated glass. In this study, the fire performance of the laminated glass has been investigated using cone calorimeter testing and the effect of different parameters such as glass thickness (6, 10, 12 mm), interlayer materials (PVB, SGP and EVA) and heat flux (25, 50 and 75 kW/m²) on the fire behaviour of laminated glass has been studied. It is found that the glass thickness, interlayer material and heat flux can significantly influence the reaction-to-fire properties such as peak heat release rate (pHRR), total heat release, time to ignition, and smoke production of laminated glass. In addition, total smoke production (TSP) is also very high for PVB (3.146 m²) and SGP (3.898 m²) laminated glass compared to EVA (0.401 m²) laminated glass and it is affected by these parameters. Finally, a simplified equation is developed to predict the pHRR of laminated glass by correlating the mass loss and external heat flux. Full article

To endow synergistically epoxy resin (EP) with excellent fire resistance and high optical transparency, a nitrogen-rich DOPO-based derivate (named as FATP) was synthesized and incorporated into EP. It showed that the incorporation of the FATP reduced the fire hazard of the EP, as demonstrated by the fact that the EP/4% FATP blends gained a UL-94 V-0 rating and an LOI value of 35%, with the lowest values of the THR (86.7 MJ/m²), the PHRR (1059.3 kW/m²), and the TSP (89.6 MJ/m²). The presence of the FATP also reduced the thermal stability and the crosslinking density whilst improving the curing reaction and the storage modulus of the EP/FATP blends. The TG-FTIR spectra showed that •HPO/•PO free radicals and some nonflammable gases (HN₃ and NH₃) were produced during the pyrolysis, and the characterization (SEM, Raman spectroscopy, and XPS) of char residues confirmed that the FATP facilitated the formation of continuous and compact carbon layers of greater graphitization degree. It was thus concluded that the FATP played the flame-retardant roles in both the gas and condensed phases. Furthermore, the FREPs kept almost identical transparency as the pristine EP, and mechanical properties were also slightly enhanced. The FREPs presented in this work show promising applications in the fields of advanced optical technology. Full article

In hazardous materials transportation systems, accident causation analysis is important to transportation safety. Complex network theory can be effectively used to understand the causal factors of and their relationships within accidents. In this paper, a higher-order network method is proposed to establish a hazardous materials transportation accident causation network (HMTACN), which considers the sequences and dependences of causal factors. The HMTACN is composed of 125 first- and 118 higher-order nodes that represent causes, and 545 directed edges that denote complex relationships among causes. By analyzing topological properties, the results show that the HMTACN has the characteristics of small-world networks and displays the properties of scale-free networks. Additionally, critical causal factors and key relationships of the HMTACN are discovered. Moreover, unsafe tank or valve states are important causal factors; and leakage, roll-over, collision, and fire are most likely to trigger chain reactions. Important higher-order nodes are discovered, which can represent key relationships in the HMTACN. For example, unsafe distance and improper operation usually lead to collision and roll-over. These results of higher-order nodes cannot be found by the traditional Markov network model. This study provides a practical way to extract and construct an accident causation network from numerous accident investigation reports. It also provides insights into safety management of hazardous materials transportation. Full article

Geopolymer is an inorganic material formed through the chemical reaction of an aluminosilicate precursor and an alkaline or acidic activating solution. It is seen as a green new alternative binder to ordinary Portland cement (OPC) for sustainable infrastructure development. The strength of the unary or blended geopolymer product is dependent on the composition and properties of the polymeric gel influenced by the ratios of Al₂O₃/SiO₂, CaO/SiO₂, CaO/(SiO₂ + Al₂O₃), Na₂SiO₃/NaOH, SiO₂/Na₂O, and liquid/binder (L/B). Essential scientific inquiry has been progressively addressed by utilizing expert assessment and research metrics. The network visualization of bibliometric co-occurrence and co-citations is of particular significance. The present study aims to highlight the trends and progress of the most influential publication sources, keywords, authors, articles, and countries in geopolymer research in the last 10 years. Bibliometric data were retrieved through Scopus and visualized in VOSviewer to create bibliometric networks. The yearly distribution and growth trends (April 2011–2022) of geopolymer, geopolymer mortar, and geopolymer concrete before (after) applying inclusion criteria were from 754 to 9887 (5186), 47 to 1374 (866), and 145 to 3721 (2253), respectively, attributed to the discoveries in more precursor materials such as laterite and the growing interest in fire and heat-resistant structures, water and wastewater treatment, cement and concrete, and brick manufacturing. The top three journals in terms of prestige for geopolymer publications were the Journal of Hazardous Materials with an impact factor equal to 14.224 and h-index equal to 307, Cement and Concrete Research with an impact factor equal to 11.958 and h-index equal to 239, and the Journal of Cleaner Production with an impact factor equal to 11.072 and h-index equal to 232. The top three journals in terms of average citation per document were Cement and Concrete Research (135.75), Materials and Design (75), and Cement and Concrete Composites (68.35). Keywords such as “geopolymers”, “inorganic polymer”, “geopolymer”, “compressive strength”, “fly ash”, and “geopolymer concrete” had the highest occurrences in publications. John Provis—University of Sheffield, Prinya Chindaprasirt—Khon Kaen University, and Jay Sanjayan—Swinburne University of Technology had the highest total citations of 6377, 5626, and 4311, respectively. The highest number of publications were from China, India, Australia, the United States of America, and Malaysia. The bibliometric findings from this study can act as a tool for academicians and policymakers to exchange research expertise, collaborate on novel geopolymer research, and create innovative joint ventures. Full article

Combustion and explosion of combustible mixtures are a major hazard that can occur anywhere from industry to energy use in households and, therefore, protective measures must be taken to limit these undesirable events. This study pays attention to the laminar burning velocity, an important parameter involved in the combustion process. The experimental laminar burning velocities of stoichiometric methane-nitrous oxide mixtures in the presence of diluents (50 vol% inerts: argon, helium, and carbon dioxide) were calculated from pressure-time records obtained in a spherical vessel with central ignition, using a correlation based on the cubic law of pressure rise during the early stage of explosion. The nitrous oxide (N2O)-based mixtures are frequently used as propellants in propulsion systems and supersonic wind tunnels, due to the nontoxicity, high saturation pressure, and the exothermic property during decomposition. However, N2O is an oxidizer that can cause safety concerns in technical applications where it is involved. The experimental data were compared with data from the literature on stoichiometric methane-nitrous oxide mixtures diluted with nitrogen and with the calculated laminar burning velocities obtained by numerical modelling of their premixed flames. The modelling was performed with Cosilab package, using GRI 3.0 mechanism, based on 53 chemical species and 325 elementary reactions. The influence of initial pressure (0.5 bar–1.75 bar) of stoichiometric inert-diluted methane-nitrous oxide mixtures on laminar burning velocities, maximum flame temperature, heat release rate, and peak concentrations of main reaction intermediates was investigated and discussed. Using the correlations of the laminar burning velocities with the initial pressure, the pressure exponent and overall reaction order of methane oxidation with nitrous oxide were determined. Obtaining a clear perspective on the laminar burning velocities of these flammable mixtures is of great importance for both assessing fire and explosion risks and guaranteeing safety in chemical and process industries. Full article