Search Results (322)

The 8.025–8.400 GHz band is one of the key X-band downlink ranges for modern Earth observation satellites, enabling high-rate transmission of imagery and sensor data for agriculture, environmental monitoring, greenhouse gas assessment, disaster response and security-related applications. The potential introduction of 5G networks into this band raises serious concerns about harmful interference to Earth observation ground stations cand, consequently, about the continuity and growth of the global Earth observation data chain. This paper investigates the feasibility of sharing this downlink band between Earth observation systems and 5G networks using a Monte Carlo simulation framework. The model includes a low-Earth-orbit Earth observation satellite with dynamically tracking ground stations and dense urban, suburban and rural deployments of 5G base stations and user devices, together with established radio-propagation and clutter models and representative protection objectives for satellite downlinks. The results suggest that, to keep interference at acceptable levels, ground stations would need to be located far from 5G deployments, which is difficult to achieve in practice and could seriously limit the future expansion of Earth observation infrastructure. Full article

Reliable radio coverage is essential for the deployment of 5G for railway (5G-R) communication systems in complex railway-line environments. Previous simulation- and measurement-based studies have mainly focused on main-track railway scenarios, while the propagation characteristics in railway-side obstructed environments remain insufficiently characterized. To address this gap, this paper investigates large-scale propagation characteristics using passive synchronization signal reference signal received power (SS-RSRP) measurements collected from a 5G-R test network. Typical railway-line scenarios, including open line-of-sight (LOS) propagation, building-obstructed railway-side sections, viaduct-blocked regions, and depot-like environments, are analyzed to reveal the influence of railway-side structures on large-scale signal behavior. A floating-intercept (FI) model is adopted to characterize scenario-dependent path loss, and a height-corrected FI refinement is further introduced for building-obstructed sections. The results show that local railway-side structures introduce distinct and quantifiable excess propagation loss beyond conventional distance-dependent path loss. The obtained model parameters can support large-scale propagation modeling, link-budget margin design, coverage-hole identification, and wireless coverage evaluation for 2100 MHz 5G-R systems in obstructed railway-side environments. Full article

Fast radio bursts (FRBs) are millisecond-duration radio transients of extragalactic origin, while ultra-high-energy cosmic rays (UHECRs; $E\gtrsim {10}^{18}$ eV) remain among the most important unresolved problems in astroparticle physics. This review examines the viability of FRBs and their central engines as sources of UHECRs within a comprehensive multi-messenger framework. We summarize the observational constraints on UHECR source populations imposed by the energy spectrum, nuclear composition, anisotropy measurements, diffuse $\gamma$-ray background, and high-energy neutrino observations, which, together, favor source classes capable of accelerating heavy nuclei with hard injection spectra, modest cosmological evolution, and sufficiently high source densities. We then review the current landscape of FRB progenitor and engine models, including magnetars, supramassive neutron stars, compact-object mergers, and accretion-powered systems, emphasizing their energetics, environments, and particle-acceleration capabilities through relativistic shocks, magnetic reconnection, magnetar wind nebulae, and direct electromagnetic acceleration by ultra-relativistic FRB pulses. We discuss how these scenarios are constrained by neutrino and $\gamma$-ray observations from IceCube, KM3NeT, and Fermi-LAT, as well as by large-scale UHECR anisotropy measurements from the Pierre Auger Observatory and Telescope Array. Finally, we examine the observational tests that will become possible in the coming decade through large samples of localized FRBs, composition-resolved UHECR measurements, next-generation neutrino observatories, and wide-field $\gamma$-ray facilities. We emphasize that FRB dispersion and rotation measures provide unique probes of the baryonic and magnetic environments relevant for UHECR acceleration and propagation, enabling a new form of multi-messenger tomography of cosmic-ray source environments and allowing the FRB–UHECR connection to become a quantitatively testable astrophysical framework. Full article

Hybrid RF-FSO-THz communication systems are promising candidates for future Internet of Things (IoT) and 6G networks because they combine the robustness of radio frequency links, the high-capacity potential of Free-Space Optical communications, and the ultra-wideband capabilities of terahertz transmission. Adaptive channel selection in such systems depends on multiple correlated environmental and physical-layer variables, including distance, rain intensity, humidity, visibility, turbulence strength, signal-to-noise ratio, channel capacity, and energy-efficiency metrics. This paper presents a physics-supported benchmark framework for supervised adaptive channel selection in hybrid RF-FSO-THz systems and systematically investigates the impact of linear and nonlinear dimensionality-reduction techniques on predictive performance, statistical robustness, computational complexity, and physical interpretability. A multi-scenario dataset comprising 5000 samples was generated using calibrated RF, FSO, and THz propagation models under clear, rain, fog, and worst-case environmental conditions. Principal Component Analysis (PCA) and Kernel PCA were evaluated together with Random Forest, Support Vector Machines (SVMs), XGBoost, Gradient Boosting (GB), Multi-Layer Perceptron (MLP), Logistic Regression, and Decision Trees. The results demonstrate that PCA preserves nearly all predictive capabilities while reducing the original 33-dimensional feature space by approximately 81.8%, maintaining accuracies close to 97–98% with the best-performing classifiers. Statistical significance analysis confirms that PCA introduces only modest degradations, whereas Kernel PCA consistently reduces the predictive performance while increasing memory requirements and inference latency. Additional environmental-only validation experiments indicate that adaptive channel selection remains highly learnable even when only pre-selection environmental descriptors are available, partially mitigating concerns regarding self-consistency bias. Overall, the results suggest that PCA provides an advantageous compromise among predictive accuracy, computational efficiency, statistical robustness, and physical interpretability for supervised adaptive channel selection in physics-supported hybrid wireless communication systems. Full article

Incremental automatic modulation recognition is essential for the awareness of complex electromagnetic environments but is prone to catastrophic forgetting. This is fundamentally precipitated by shortcut learning, a phenomenon where deep models prioritize stable but non-essential channel artifacts (e.g., noise, fading) over intrinsic modulation characteristics. Consequently, models rely on spurious correlations that collapse during incremental task updates or environmental shifts, leading to representation drift. To bridge this gap, we propose the ParalIMR framework, which integrates a parallel reconstruction architecture with the segment substitution (SS) strategy to decouple modulation signatures from environmental fingerprints. Specifically, the parallel branch utilizes a Denoising AutoEncoder (DAE) as a task-agnostic structural anchor, purifying feature representations and maintaining geometric consistency across varying signal-to-noise ratios without propagating noise-overfitting to the classifier. In the meantime, the SS strategy actively disrupts the temporal coupling between class labels and hardware fingerprints through random reorganization, forcing the model to extract modulation-invariant structural cues. Experimental results on the RML2016a datasets demonstrate that in a three-stage incremental setup, our method achieves an overall accuracy of 84.32% at 0 dB SNR, representing a 2.69% improvement over the iCaRL baseline. Notably, this advantage expanded to 4.46% on RML2018, demonstrating that ParalIMR effectively arrests catastrophic forgetting. Ultimately, this research provides a robust learning paradigm tailored for cognitive radio and electronic warfare in dynamic electromagnetic landscapes. Full article

Infrared cameras used in radio telescopes often suffer image degradation in complex optical and thermal environments. Solar radiation, convergent reflected light, and thermal emission from support structures can substantially impair imaging performance. To address this problem, this paper proposes a split reflective ellipsoidal baffle for suppressing infrared imaging degradation. Unlike conventional baffles, which mainly rely on structural occlusion and surface absorption, the proposed design functions as an upstream stray light regulation unit. It also establishes a computational framework integrating ellipsoidal vane geometry, realistic edge microtopography modelling, ray-tracing simulation, and detector plane irradiance response analysis. First, the reflective properties of the ellipsoidal surface are used to construct an off-axis stray light propagation constraint model. Under this model, incident stray radiation is redirected away from the effective imaging path or guided into light-trapping regions between adjacent vanes. Second, a laser confocal microscope is used to capture the true three-dimensional edge morphology of vanes with different materials and machining angles. This strategy addresses the limitations of the conventional 0.02 mm rounded edge approximation, which cannot accurately represent real scattering behaviour. The measured morphologies are then converted into high-fidelity computational models compatible with ray-tracing analysis. Furthermore, stray light suppression performance is evaluated using point source transmittance, detector plane irradiance distribution, and grey scale response in experimental images. Simulation and darkroom experiments show that the proposed baffle suppresses residual stray light more effectively than conventional absorptive baffles. The results demonstrate a computable, manufacturable, and experimentally verifiable strategy for front-end stray light control and baffle optimisation. This strategy can also support image quality enhancement in infrared imaging systems operating under complex optical and thermal environments. Full article

This paper investigates the feasibility of 3D self-localization and tracking using chipless radio frequency identification (RFID) tags operating in the terahertz (THz) frequency band. The primary objective is to achieve sub-millimeter (sub-mm) localization and tracking accuracy while minimizing reliance on external infrastructure. To this end, a hybrid localization framework is proposed that jointly exploits round-trip time-of-flight (RToF) and angle-of-arrival (AoA) measurements to enhance localization performance. Although near-field propagation effects are inherently significant in the considered THz operating regime, a simplified far-field approximation is adopted to facilitate tractable system modeling and analytical development. The proposed framework is further extended to dynamic scenarios through an extended Kalman filter (EKF)-based tracking algorithm, which incorporates temporal state evolution to improve estimation robustness under noisy measurements. Furthermore, the Cramér–Rao lower bound (CRLB) for the hybrid RToF-AoA system is derived to establish the fundamental limits of localization accuracy under varying system configurations and measurement conditions. Simulation results demonstrate that the proposed approach is capable of achieving sub-mm localization and tracking accuracy with a highly constrained anchor infrastructure, including operation with a single anchor in the considered scenario. These findings highlight the potential of THz chipless RFID technology as a promising enabling solution for next-generation high-accuracy localization and tracking applications. Full article

The rapid expansion of wireless connectivity has led to vast amounts of radio-frequency (RF) energy being continuously radiated into the environment, much of which is dissipated due to severe propagation losses. Recycling this otherwise wasted RF energy is, therefore, a critical enabler for energy-efficient and sustainable wireless systems. RF energy harvesting nodes and passive backscatter communication devices provide promising solutions by enabling battery-less or low-maintenance operation for future green networks. However, both paradigms suffer from fundamental limitations, including restricted communication range, near–far effects, and insufficient harvested energy at extended distances. This review examines how cooperative relays can address these challenges by harvesting ambient RF energy and assisting both information transfer and power delivery. From a communication perspective, we review cooperative backscatter communication and harvest-then-transmit (HTT) protocols, highlighting how multi-hop relaying significantly extends coverage and improves throughput for energy-constrained devices. Particular emphasis is placed on tag-to-tag (T2T) backscatter systems, relay-assisted architectures, decode-and-forward and amplify-and-forward protocols, and optimal multi-access time allocation strategies that mitigate the doubly near–far problem in passive networks. From an energy-transfer perspective, the review is structured around three pillars: wireless power transfer (WPT), multi-hop energy transfer (MET), and integrated charging-and-sensing frameworks. We discuss relay deployment and placement optimisation, UAV-enabled mobile energy relays, waveform and beam-forming design, and the transition from idealised linear harvesting models to practical nonlinear rectification models. Key practical constraints, such as regulatory limits, safety compliance, self-interference, protocol overhead, synchronisation, and imperfect channel knowledge, are systematically reviewed. The paper concludes by identifying the scalability limits of multi-hop cooperative systems, outlining how the joint optimisation of energy relaying and cooperative communication enables RF energy recycling for sustainable, low-carbon wireless networks and highlighting open challenges and future research directions. Full article

Deterministic radio wave propagation models provide high accuracy in complex outdoor environments but remain computationally impractical for large-scale network planning and spectrum management. In contrast, empirical and hybrid models offer low complexity at the expense of reduced accuracy, systematic bias, and limited terrain sensitivity. This paper proposes a unified delta learning framework that enhances fast baseline propagation models by learning a data-driven correction toward a deterministic Parabolic Equation Modeling (PEM) reference. A key novelty lies in a compact, physics-informed feature representation that replaces the full terrain profile with an 18-dimensional vector combining local geometric descriptors, global terrain characteristics, and baseline responses, enabling accurate correction with low-dimensional input. The study also provides the first systematic investigation of delta-based correction across multiple widely used propagation models. The framework is evaluated for free-space propagation, ITU-R P.1546, ITU-R P.1812, and ITU-R P.452 using ridge regression, kernel ridge regression, gradient boosting regression trees, and a neural network model. Model performance is assessed in terms of error reduction, bias mitigation, robustness across learning algorithms, and profile-level generalization to previously unseen propagation paths within the considered terrain categories. Results show substantial error reduction, with up to twofold improvement for simpler baseline models and consistent gains for hybrid models, while preserving computational efficiency. Full article

Automatic Modulation Classification (AMC) is essential for waveform-level signal characterization. It supports spectrum sensing, signal identification, and adaptive resource allocation in cognitive radio and next-generation wireless systems. However, channel impairments such as multipath propagation, frequency offset, fast fading, and noise degrade modulation signatures, making reliable AMC challenging. Existing deep learning-based approaches often rely on purely data-driven learning, leading to insufficient modeling of modulation-relevant features, loss of transient characteristics, and limited exploitation of hierarchical relationships among modulation types. To address these issues, this paper proposes PHM-Net, a physics-informed hierarchical multi-scale network for robust AMC. The model employs a hierarchical backbone with residual encoder blocks. A Transient Feature Gating (TFG) module enhances modulation-relevant representations, a Cross-Resolution Signal Aggregation (CRSA) module fuses multi-stage features, and a Physics-Informed Hierarchical Loss (PI-HL) enforces consistency between coarse- and fine-grained predictions. Experimental results on three benchmark datasets (RML2016.10a, RML2016.10b, and RML2018.01a) show that PHM-Net consistently achieves the highest average accuracy among all compared models. On RML2018.01a, which contains 1024-sample sequences and 24 classes, PHM-Net achieves an average accuracy of 64.59% and a best-case accuracy of 98.42%, surpassing AMC_Net by 11.14 and 17.09 percentage points and CNN-Transformer by 9.43 and 11.15 percentage points, respectively. PHM-Net provides a robust and interpretable solution for AMC under complex channel conditions. Full article

Accurate prediction of radio wave propagation in evaporation ducts is critical for radar systems but faces significant environmental uncertainties. This study presents an uncertainty quantification and global sensitivity analysis framework comparing three surrogate models: Polynomial Chaos Expansion, Ordinary Kriging, and Polynomial-Chaos Kriging. Using a parabolic equation solver, we quantify how five parameters—mean duct height, duct height slope, potential refractivity gradient, frequency, and root mean square (RMS) wave height—affect propagation loss. We assess predictive accuracy, perform Sobol-based sensitivity analysis, and explore how surrogate performance relates to the normalized frequency V, a parameter characterizing modal complexity. Results show that Kriging consistently outperforms the others: its local interpolation capability proves essential for capturing rapid spatial oscillations caused by multimode interference. We observe a statistically significant negative correlation between Kriging’s prediction error and V, suggesting that its local interpolation becomes increasingly advantageous as the modal complexity of the field (quantified by V) increases. This provides a physically interpretable, though not yet predictive, link between surrogate model choice and the underlying propagation physics. Sensitivity analysis reveals that mean duct height dominates uncertainty at short-to-medium ranges, while the potential refractivity gradient becomes increasingly influential at longer ranges. RMS wave height exhibits localized effects near multipath nulls, particularly at higher frequencies. These findings provide quantitative guidance for prioritizing environmental measurements and offer a physically interpretable basis for surrogate model selection in evaporation duct problems. Full article

Accurate path loss prediction is essential for reliable and energy-efficient operation of dense Wireless Sensor Network–Internet of Things (WSN–IoT) systems, where radio transmission dominates node energy consumption and significantly impacts network lifetime. However, existing empirical or simulated models cannot achieve high prediction accuracy without explicitly linking statistical error metrics to system-level design parameters, thus limiting their practical interpretability in deployment scenarios. This work presents an extensive comparative evaluation among well-known propagation models versus machine learning regressors, and a lightweight convolutional neural network (CNN) for path loss prediction, using transmitter–receiver distance and carrier frequency as input features. A pairwise communication model is adopted to ensure consistent analysis across heterogeneous environments while preserving physical interpretability of the propagation process. Building upon this evaluation, a unified analytical framework is proposed that correlates path loss (PL) prediction accuracy to system-level metrics relevant to WSN–IoT design. Moreover, in this work we apply the Root Mean Square Error (RMSE) of the best-performing model as an empirical estimate of the shadowing standard deviation, under standard statistical assumptions, thereby allowing its direct use in link budget and fade margin calculations. Extensive experimental results across five heterogeneous wireless link datasets demonstrate that improved prediction accuracy leads to reduced transmission power requirements, lower energy consumption, enhanced communication reliability, and extended node lifetime. Full article

IEEE 802.11be, commercially known as Wi-Fi 7, extends wireless local area network (WLAN) capability through wider channel bandwidths, higher-order modulation, and tri-band operation. However, realised indoor performance is still strongly affected by radio propagation conditions. This study presents a controlled empirical assessment of Wi-Fi 7 behaviour in a multi-storey university building by examining throughput and received signal strength (RSS) across the 2.4 GHz, 5 GHz, and 6 GHz bands using a single-link measurement setup. Six experimental scenarios were used to examine distance variation, wall penetration, line-of-sight (LOS) obstruction, floor separation, antenna orientation, and microwave interference. The measured RSS values were compared with the free-space, two-ray ground reflection, and log-distance shadowing models using mean absolute error (MAE). Six experimental scenarios were designed to isolate dominant indoor impairments, including distance variation, wall penetration, line-of-sight obstruction, floor separation, antenna orientation, and microwave interference. Measured RSS values were evaluated against free-space, two-ray, and log-distance shadowing models using mean absolute error as the comparison metric. Results show that 2.4 GHz retains greater penetration at lesser capacity, while 6 GHz offers the maximum short-range throughput under clear line-of-sight conditionsbut rapidly deteriorates with structural attenuation. Performance in all bands is greatly diminished by multi-wall blockage and line-of-sight loss. A single propagation model cannot adequately capture the divergence introduced by increasing distance and indoor attenuation, while short-range line-of-sight conditions more closely resemble deterministic predictions in terms of measured RSS alignment. Overall, the results highlight the trade-off between Wi-Fi 7’s capacity and coverage, and provide helpful advice for choosing frequencies, positioning access points, and organizing indoor coverage. The research findings provide insights into the practical deployment of next-generation Wi-Fi in multi-story buildings and residential houses. Full article

The transition toward environmentally sustainable 6G networks requires mitigating the high-power consumption of traditional active base stations and relay nodes currently used to overcome signal path loss. This paper introduces Reconfigurable Intelligent Surfaces (RIS) as a paradigm-shifting, inherently passive alternative that alters the wireless propagation environment without requiring power-intensive radio frequency (RF) chains. Rather than focusing solely on spectral efficiency, this research aims to maximize Energy Efficiency (EE) to achieve a critical equilibrium between network performance and power consumption. MATLAB-based analytical models demonstrate that received signal power scales quadratically with the number of reflecting elements via constructive interference. Furthermore, systematic evaluations reveal that a 64-element RIS panel imposes a negligible hardware load consuming merely 0.005 Watts per element, offering a highly sustainable alternative to the massive transmit power (up to 40 dBm) frequently required by unassisted networks in noisy environments. By defining a mathematical “Green Operating Point,” this study demonstrates that integrating lightweight RIS panels significantly enhances Signal-to-Noise Ratio (SNR) and data rates, steering next-generation telecommunications toward highly sustainable, low-power operations. Full article

Rapid localisation of trapped victims after urban disasters is essential but challenging because Bluetooth Low Energy (BLE) beacons are intermittent, radio propagation is obstructed by rubble, UAVs are energy-constrained, and real-world multi-UAV training is impractical in high-risk search-and-rescue (SAR) environments. This study formulates post-disaster victim localisation as a cooperative Dec-POMDP and adapts a model-aided federated multi-agent reinforcement learning framework based on FedQMIX. The proposed pipeline combines a lightweight LoS/NLoS surrogate channel model, PSO-based victim-position estimation, return-to-base and map-feasibility safety checks, an SAR-aligned shaped reward, and a leakage-free centralised training state based on estimated rather than ground-truth victim locations. Each UAV trains locally inside a learned digital-twin simulator and periodically shares only QMIX network parameters, avoiding the exchange of raw trajectories or RSSI logs. The framework is evaluated on two synthetic post-earthquake urban maps representing a compact return-to-base scenario and a larger reach-to-destination scenario. Across five independent seeds per method and map, Model-Aided FedQMIX achieves the highest and most stable victim-localisation performance, with the clearest advantage observed in the larger long-horizon scenario. Additional diagnostic tests examine reward-weight sensitivity, RF channel-shift robustness, BLE/smartphone hardware heterogeneity, non-IID client-data variation, and partial-client FedAvg under missing client updates. The results indicate that combining model-aided localisation cues, decentralised value factorisation, SAR-aligned objective design, and federated parameter sharing can improve the robustness of UAV-based victim-localisation policies. The framework also clarifies deployment considerations for federated SAR coordination, including communication payload, privacy boundaries, heterogeneous client experience, device variability, and intermittent connectivity. This study remains simulation-based, and future validation with real UAVs, BLE devices, and rubble-inspired testbeds is required before operational deployment. Full article