Search Results (34)

In agricultural practice, in addition to determining the nitrogen (N_f) dose, it is necessary to effectively control its effect on currently grown crops. Meeting these conditions requires not only the use of phosphorus (P) and potassium (K), but also nutrients such as magnesium (Mg) and sulfur (S). This hypothesis was verified in a single-factor field experiment with winter wheat (WW) carried out in the 2015/2016, 2016/2017, and 2017/2018 growing seasons. The experiment consisted of seven variants: absolute control (AC), NP, NPK-MOP (K as Muriate of Potash), NPK-MOP+Ki (Kieserite), NPK-KK (K as Korn–Kali), NPK-KK+Ki, and NPK-KK+Ki+ES (Epsom Salt). The use of K as MOP increased grain yield (GY) by 6.3% compared to NP. In the NPK-KK variant, GY was 13% (+0.84 t ha⁻¹) higher compared to NP. Moreover, GYs in this fertilization variant (FV) were stable over the years (coefficient of variation, CV = 9.4%). In NPK-KK+Ki+ES, the yield increase was the highest and mounted to 17.2% compared to NP, but the variability over the years was also the highest (CV ≈ 20%). The amount of N in grain N (GN) increased progressively from 4% for NPK-MOP to 15% for NPK-KK and 25% for NPK-KK+Ki+ES in comparison to NP. The nitrogen harvest index was highly stable, achieving 72.6 ± 3.1%. All analyzed NUE indices showed a significant response to FVs. The PFP-N_f (partial factor productivity of N_f) indices increased on NPK-MOP by 5.8%, NPK-KK by 12.9%, and NPK-KK+Ki+ES by 17.9% compared to NP. The corresponding N_f recovery of N_f in wheat grain was 47.2%, 55.9%, and 64.4%, but its total recovery by wheat (grain + straw) was 67%, 74.5%, and 87.2%, respectively. In terms of the theoretical and practical value of the tested indexes, two indices, namely, NUP (nitrogen unit productivity) and NUA (nitrogen unit accumulation), proved to be the most useful. From the farmer’s production strategy, FV with K applied in the form of Korn–Kali proved to be the most stable option due to high and stable yield, regardless of weather conditions. The increase in the number of nutritional factors optimizing the action of nitrogen in winter wheat caused the phenomenon known as the “scissors effect”. This phenomenon manifested itself in a progressive increase in nitrogen unit productivity (NUP) combined with a regressive trend in unit nitrogen accumulation (NUA) in the grain versus the balance of soil available Mg (Mg_b). The studies clearly showed that obtaining grain that met the milling requirements was recorded only for NUA above 22 kg N t⁻¹ grain. This was possible only with the most intensive Mg treatment (NPK-KK+Ki and NPK-KK+Ki+ES). The study clearly showed that three of the six FVs fully met the three basic conditions for sustainable crop production: (i) stabilization and even an increase in grain yield; (ii) a decrease in the mass of inorganic N in the soil at harvest, potentially susceptible to leaching; and (iii) stabilization of the soil fertility of P, K, and Mg. Full article

Non-conventional water sources (saline and brackish water) are viable options for crop cultivation. Current salt-tolerance research largely focuses on Na⁺ and Cl⁻, while other ions in these waters remain ill-understood. Synthetic seawater was a representative of saline and brackish water in a Design of Experiments (DoE) treatment design used to evaluate the effects of factors [synthetic seawater (0, 15, 30, or 45%, v/v, Instant Ocean^®), total inorganic nitrogen (0, 14, or 28 mM; 1 NH₄⁺:8 NO₃⁻ ratio), potassium (0, 9, or 21 mM), calcium (0, 2, or 5 mM), silicon (0, 0.03, or 0.09 mM) and zinc (0, 0.05, or 2 mM)] on seedlings for two varieties of Brassica juncea [‘Carolina Broadleaf’ (CB) and ‘Florida Broadleaf’ (FB)] using a hydroponic assay. In 30–45% synthetic seawater, 0.09 mM of silicon or 2 mM of calcium alleviated salt stress. In FB, 0.04–0.06 mM of silicon was optimal for the production of new leaves. The CB variety showed greater production of new leaves with 0.09 mM of silicon and 28 mM of potassium. Potassium and calcium are components of seawater, and a sodium chloride assay would not account for their interactions without a multivariate approach to evaluate salt tolerance. The seedling assay identified factors and established criteria for larger-scale harvest experiments. Full article

Buchwaldoboletus xylophilus is an edible bolete species belonging to the family Boletaceae and the genus Buchwaldoboletus. It is found in tropical and subtropical regions, which are known for their rare wild resources. In this study, wild B. xylophilus was isolated and cultured, and its biological characteristics and artificial cultivation techniques were studied. The results show that the optimal carbon source, nitrogen source, and inorganic salt for the mycelium growth of B. xylophilus were maltose, ammonium tartrate, and magnesium sulfate, respectively. The most appropriate temperature was 28 °C, and the pH value was between 5 and 6. The most effective combination was determined via orthogonal experimentation, as follows: dextrose, ammonium nitrate, potassium dihydrogen phosphate, and 28 °C. The results of artificial cultivation in mushroom houses show that the mycelium of B. xylophilus was strong and grew well on the culture medium. The mycelial growth rate was 4.54 mm/d, and the fungus bags were filled about 50 days after inoculation. The primordia formed 9 to 14 days after covering with soil and the fruiting body matured in 6~8 days. The average yield of fresh mushrooms reached 131.07 ± 29.38 g/bag, and the average biological efficiency reached 28.48 ± 6.39%. In this study, artificial cultivation technology in respect of B. xylophilus in mushroom houses is reported for the first time. The fruiting bodies obtained through cultivation were identified using morphological and molecular biological methods. This technology offers benefits such as affordability, a brief cultivation cycle, substantial yields, and superior quality, making it ideal for industrial-scale and extensive cultivation. Full article

Significant progress has been achieved in the development of superabsorbent polymers (SAPs), focusing on enhancing their performance and expanding their applications. Efforts are particularly directed at increasing water absorbency while promoting environmental sustainability. Biodegradable materials such as starch and potassium humate have been successfully integrated with SAPs for desert greening, improving water retention, salt resistance, and seedling survival. The inclusion of nutrient-rich organic-inorganic composites further enhances the durability, efficiency, and recyclability of SAPs. In drought mitigation, polymeric absorbent resins such as polyacrylamide and starch-grafted acrylates have shown efficacy in ameliorating soil conditions and fostering plant growth. In arid environments, agents enriched with humic acid and bentonite contribute to improved soil aeration and water retention, creating optimal conditions for plant establishment. Additionally, the adoption of innovative waste management solutions has led to the production of amphiphilic SAPs from residual sludge, effectively addressing soil nutrient deficiencies and environmental pollution. In the food industry, SAPs containing protease, tea polyphenols, and chitosan exhibit potential for enhancing the stability and quality of seafood products. These advancements highlight the growing relevance of structural optimization approaches in SAP development across diverse applications and underline the importance of continued innovation in these fields. As novel materials emerge and environmental challenges intensify, the potential applications of SAPs are anticipated to expand significantly. Full article

Exogenous brassinolide (BR) and strigolactones (SLs) play an important role in alleviating salt stress in maize. We studied the morphological and physiological responses of the salt-sensitive genotype PH4CV and salt-tolerant genotype Zheng58 to BR (1.65 nM), SL (1 µM), and BS (1.65 nM BR + 1 µM SL) under salt stress. Phenotypic analysis showed that salt stress significantly inhibited the growth of maize seedlings and significantly increased the content of Na⁺ in the roots. Exogenous hormones increased oxidase activity and decreased Na⁺ content in the roots and mitigated salt stress. Transcriptome analysis showed that the interaction of BR and SL is involved in photosynthesis–antenna proteins, the TCA cycle, and plant hormone signal transduction pathways. This interaction influences the expression of chlorophyll a/b-binding protein and glucose-6-phosphate isomerase 1 chloroplastic, and aconitase genes are affected. Furthermore, the application of exogenous hormones regulates the expression of genes associated with the signaling pathways of cytokinin (CK), gibberellins (GA), auxin (IAA), brassinosteroid (BR), abscisic acid (ABA), and jasmonic acid (JA). Additionally, exogenous hormones inhibit the expression of the AKT2/3 genes, which are responsible for regulating ion transduction and potassium ion influx. Four candidate genes that may regulate the seedling length of maize were screened out through WGCNA. Respective KOG notes concerned inorganic ion transport and metabolism, signal transduction mechanisms, energy production and conversion, and amino acid transport and metabolism. The findings of this study provide a foundation for the proposition that BR and SL can be employed to regulate salt stress alleviation in maize. Full article

Sugar beet molasses is a low-value byproduct from the sugar industry. It contains significant amounts of sucrose (approx. 50% (w/w)), which can be used for many different applications, for example, as feedstock for the production of fuel (as ethanol) and biobased chemicals such as 5-hydoxymethyl furfural (HMF). To produce platform chemicals, sucrose is hydrolyzed into its monomeric C6 sugars: glucose and fructose. When comparing the hydrolysis rates of molasses with a pure sucrose solution, the specific reaction rate is much slower (Q_p/x,60min = 93 and 70 g_prod L⁻¹ h⁻¹ g_cell⁻¹ for pure sucrose and crude molasses, respectively) at the same sucrose concentration (300 g/L) and process conditions. To clarify why molasses inhibits the enzymatic hydrolysis rate, the influence of its viscosity and inorganic and organic composition was investigated. Also, the effects of molasses and treated molasses on pure enzymes, invertase (from Saccharomyces cerevisiae, 0.05 mg/mL), compared with hydrolysis using whole cells of Baker’s yeast (3 mg/mL), were tested. The results indicate an inhibitory effect of potassium (Q_p/x,60min = 76 g_prod L⁻¹ h⁻¹ g_cell⁻¹), generally at high salt concentrations (Q_p/x,60min = 67 g_prod L⁻¹ h⁻¹ g_cell⁻¹), which could be correlated to the solution’s high salt concentrations and possibly the synergistic effects of different ions when applying concentrations that were four times that in the molasses. Also, the viscosity and sucrose purity seem to have an effect, where pure sucrose solutions and thick juice from the sugar mill yielded higher hydrolysis rates (Q_p/x,60min = 97 g_prod L⁻¹ h⁻¹ g_cell⁻¹) than molasses-type solutions with a higher viscosity (Q_p/x,60min = 70–74 g_prod L⁻¹ h⁻¹ g_cell⁻¹). Attempting to further understand the effects of different components on the invertase activity, an in silico investigation was performed, indicating that high salt concentrations affected the binding of sucrose to the active site of the enzyme, which can result in a lower reaction rate. This knowledge is important for future scale-up of the hydrolysis process, since reduced hydrolysis rates require larger volumes to provide a certain productivity, requiring larger process equipment and thereby higher investment costs. Full article

Polyploid plants often exhibit enhanced stress tolerance. Switchgrass is a perennial rhizomatous bunchgrass that is considered ideal for cultivation in marginal lands, including sites with saline soil. In this study, we investigated the physiological responses and transcriptome changes in the octoploid and tetraploid of switchgrass (Panicum virgatum L. ‘Alamo’) under salt stress. We found that autoploid 8× switchgrass had enhanced salt tolerance compared with the amphidiploid 4× precursor, as indicated by physiological and phenotypic traits. Octoploids had increased salt tolerance by significant changes to the osmoregulatory and antioxidant systems. The salt-treated 8× Alamo plants showed greater potassium (K⁺) accumulation and an increase in the K⁺/Na⁺ ratio. Root transcriptome analysis for octoploid and tetraploid plants with or without salt stress revealed that 302 upregulated and 546 downregulated differentially expressed genes were enriched in genes involved in plant hormone signal transduction pathways and were specifically associated with the auxin, cytokinin, abscisic acid, and ethylene pathways. Weighted gene co-expression network analysis (WGCNA) detected four significant salt stress-related modules. This study explored the changes in the osmoregulatory system, inorganic ions, antioxidant enzyme system, and the root transcriptome in response to salt stress in 8× and 4× Alamo switchgrass. The results enhance knowledge of the salt tolerance of artificially induced homologous polyploid plants and provide experimental and sequencing data to aid research on the short-term adaptability and breeding of salt-tolerant biofuel plants. Full article

Fertilization has a significant impact on soil nutrients and microbiological properties, which, in turn, affect crop yield. However, the specific effects of organic and inorganic fertilizers on soil fertility and microbial characteristics in maize fields, as well as the key soil factors influencing changes in crop yield, remain largely unknown. A study was conducted over two years (2021–2022) to investigate the impact of various nitrogen fertilization rates and types on maize yield and soil properties in the Loess Plateau. Field experiments with five nitrogen levels (60, 90, 120, 150, and 180 kg N ha⁻¹) and two fertilizer types (chemical and organic) were conducted. The optimal yield was achieved with 150 kg N ha⁻¹, significantly surpassing that of other treatments by 4.5−45.7%. Compared with the organic fertilizers, the chemical fertilizers increased soil salt and catalase levels, with soil nitrate and ammonium content being higher at the jointing stage but lower at maturity. Organic fertilization improved soil potassium, organic matter, urease and phosphatase activities, and microbial populations. Yield correlated with several soil indicators, including salt content, nitrate, available potassium, and enzyme activities. Notably, soil nitrate also correlated with actinomyces quantity. A principal component analysis showed that the organic fertilizer was more beneficial to soil health than the chemical fertilizer. Consequently, this study recommends 150 kg N ha⁻¹ of organic fertilizer for sustainable maize farming and soil health in China’s northwest arid region, providing a theoretical framework for agricultural practices. Full article

Feldspar, which is one of the main inputs of the ceramic and glass industries, has widespread sources in Turkey and thus forms a large component of the country’s mineral exportation. In addition to this, potassium feldspars are one of the raw materials suitable for the production of potash, which is a vital component of the agricultural industry. In our work, the chlorination technique was used to produce potassium chloride (KCl) from potassium feldspar ore of the Kırşehir-Buzlukdağı region. The aim of this study was to determine the most suitable and economical additive for producing KCl from potassium feldspar ore with high efficiency. The calcination process was used to decompose potassium feldspar and form potassium chloride using different kinds of salts, such as CaCl₂, NaCl, and CaSO₄, followed by the water-leaching process. While 93.4% K dissolution efficiency was achieved in the tests performed with CaCl₂, the same dissolution efficiency (93.7%) was obtained in the experiments with a CaCl₂-NaCl mixture by using less CaCl₂. Furthermore, the CaSO₄-NaCl mixture achieved the highest dissolution efficiency. The recovery of KCl from feldspar, by assaying its 7.21% K₂O, was carried out using a 1:1.25:1.5 ratio of feldspar:CaSO₄:NaCl at 1000 °C for 60 min, followed by leaching, to obtain KCl with 96.1% potassium dissolution. Full article

The possibility of deep radiochemical purification of Li₂CO₃ has been examined in the context of the purification program of the AMoRE collaboration. In this experiment, commercial Li₂CO₃ was converted into LiNO₃. Co-precipitation with inorganic salt-based carriers followed by membrane filtration and sorption using MDM inorganic sorbent methods were tested for the removal of alkaline-earth and transition metals, potassium, magnesium, aluminum, uranium, thorium, and radium. The calcium molybdate-based carrier was the most efficient for removing Th, U, and K. Subsequently, the radium, calcium, and barium contamination was removed with MDM sorbent. After the impurities’ removal, the final Li₂CO₃ product was synthesized with NH₄HCO₃ sludge. The separation factors were derived by means of ICP-MS and HPGe analyses of the initial material and the intermediate and final products. The study showed the optimum conditions of co-precipitation and sorption to reach a high yield and radiopurity of lithium carbonate used for low-radioactive-background experiments. The developed method is an important step toward performing next-generation large-scale (1-ton) neutrino experiments using Li-containing detectors. Full article

Every day, more and more consumers choose to drink bottled water instead of tap water, since they believe that it is superior in quality. One of the criteria used by European consumers to choose bottled water is the geographical region of the spring. The flavor of the water is an additional factor that influences consumers’ choices. As a result, determining the flavor of water is gaining popularity and is thus turning into a prominent field of study. However, studies on the potential environmental factors that affect the sensory characteristics of water (i.e., “terroir” of water) are limited. To this end, we investigated the composition of natural mineral water spring from Mount Smolikas in Greece over a two-year period to find any potential alterations in water composition. The physicochemical parameters (pH, conductivity, turbidity, color, and total hardness) of the water samples were examined, along with their content in metal ions, inorganic salts (cations and anions), and total organic carbon. Additionally, the water samples were analyzed for their content of off-odor volatile compounds (i.e., 2-methylisoborneol and geosmin) that can be naturally found in water. The study also examined the correlation of climate conditions (accumulated rainfall and mean temperature) with the parameters above using a principal component analysis and a multivariate correlation analysis. The results showed that the physicochemical characteristics of water samples complied with European regulations. Metals, anions, and cations were all below the corresponding parametric values established by the European Commission. The off-odor organic compounds, 2-methylisoborneol, and geosmin, had average concentrations of 9.4 and 2.7 ng/L, respectively. Chromium and aluminum elevated concentrations might be attributed to specific ores present near the water source, while pH, conductivity, total hardness, nitrates, and off-odor compounds levels could be fluctuated due to local climate conditions. The study revealed a good positive correlation (>0.7) between the quantity of rainfall and the level of potassium cations. Moreover, a strong negative correlation (>0.9) was observed between magnesium cations and the mean temperature of the local area. The study can be used as a benchmark for future studies to determine the terroir of mineral water. Full article

Natural hydraulic lime (NHL) can be used as an inorganic cementitious material, as it exhibits low shrinkage, salt-alkali resistance, moderate strength, and good durability with cultural relics. There has been increasing interest in NHL, as it is considered an appropriate material for the restoration and reinforcement of architectural cultural relics. In this study, limestone and potassium feldspar were mixed and calcined at different ratios and high temperatures, and artificial hydraulic lime (HL) was produced. According to the X-ray diffraction (XRD) results, the resulting products after high-temperature calcination were mainly composed of calcium oxide, dicalcium silicate (C₂S), and dicalcium aluminosilicate (C₂AS). As a compromise, when potassium feldspar accounted for 30% of the total mass, HL contains a more suitable air-hardening component and hydraulic component. Scanning electron microscope (SEM) and Energy Dispersive Spectrometer (EDS) analyses show that the phases of calcium carbonate (CaCO₃) and hydrated calcium silicate (C-S-H) gradually increased with prolonged curing time for HL. To study the partial mechanical properties and durability of HL, a comparison was made with NHL. The mechanical properties were investigated with the flexural and compressive strengths and shrinkage. The results show that HL has higher strength than NHL, but NHL has smaller shrinkage. Accelerated aging tests indicated that HL and NHL5 led to higher resistance to water immersion, fluctuations in temperature and humidity, sulphate decay, an alkali environment, and frost–thaw action than NHL2. HL has excellent mechanical properties and durability and can be considered a conservation material for stone relics in the future. Full article

An ion chromatography technique with conductivity detection was selected as an analytical tool for the simultaneous indirect determination of sodium sulfate, potassium sulfate, and magnesium sulfate via their respective cations. The method was developed and validated for the quantitative assay of the inorganic salts under study in oral pharmaceutical dosage forms. Chromatographic separation was achieved on a Dionex^®IonPac^® CS16 column (250 × 5 mm) column using the gradient elution method. A mobile phase-A consisting of methane sulfonic acid (6.7%, v/v) in Milli-Q water, which is used together with Milli-Q water, was used as a mobile Phase-B. The flow rate was 1.2 mL/min. The retention times of sodium, potassium, and magnesium as sulfates were 7.8, 12.8, and 16.2 min, respectively. The method was validated according to ICH guidelines and showed good linearity and accuracy results within concentration ranges of 80.0–240.0, 20.0–60.0, and 4.5–13.5 ppm for sodium, potassium, and magnesium as sulfates, respectively. The relative standard deviation results for intra- and inter-day precision were less than 1.0%. The method was applied successfully for determination of the analytes under study in their mixed pharmaceutical oral solution and found suitable for their routine and stability analysis. Full article

Turfgrasses are considered an important part of the landscape and ecological system of golf courses, sports fields, parks, and home lawns. Turfgrass species are affected by many abiotic stresses (e.g., drought, salinity, cold, heat, waterlogging, and heavy metals) and biotic stresses (mainly diseases and pests). In the current study, seashore paspalum (Paspalum vaginatum Sw.) and Tifway bermudagrass (Cynodon transvaalensis Burtt Davy × C. Dactylon) were selected because they are popular turfgrasses frequently used for outdoor lawns and sport fields. The effect of the combined stress from both soil salinity and cold on these warm season grasses was investigated. Some selected organic and inorganic amendments (i.e., humic acid, ferrous sulphate, and silicon) were applied as foliar sprays five times during the winter season from late October to March. This was repeated over two years in field trials involving salt-affected soils. The physiological and chemical parameters of the plants, including plant height; fresh and dry weight per plot; total chlorophyll content; and nitrogen, phosphorus, iron, and potassium content, were measured. The results showed that all the studied amendments improved the growth of seashore paspalum and Tifway bermudagrass during this period compared to the control, with a greater improvement observed when using ferrous sulphate and humic acid compared to silicon. For seashore paspalum, the highest chlorophyll content in April was recorded after the application of ferrous sulphate at a level of 1000 ppm. The current research indicates that when grown on salt-affected soils, these amendments can be used in warm-season grasses to maintain turf quality during cold periods of the year. Further research is needed to examine any negative long-term effects of these amendments and to explain their mechanisms. Full article

The food industry is not the only sphere of human activity where inorganic food additives are globally used. In certain concentrations, they are safe for people and agricultural animals. Nonetheless, they impose a negative impact on other classes of living organisms. Therefore, our objective was to determinine the influence of some inorganic food additives (alkalis, acids, salts) on the vitality of nematode larvae that parasitize agricultural animals: Strongyloides papillosus, Haemonchus contortus and Muellerius capillaris. We studied the effects of sodium hydroxide, potassium hydroxide, boric acid, phosphoric acid, potassium chloride, calcium chloride, sodium nitrite, potassium nitrite, sodium nitrate, potassium nitrate, ammonium bicarbonate, sodium bisulfite, sodium bisulfate, sodium sulfate, potassium sulfate, calcium sulfate, sodium thiosulfate, sodium metabisulfite, potassium metabisulfite, copper sulfate pentahydrate, tetrasodium pyrophosphate, sodium triphosphate, sodium borate decahydrate and talc. In in vitro experiments, the strongest effects were produced by alkalis sodium hydroxide and potassium hydroxide. In 24 h, 1% solutions of those substances killed 69% of larvae of S. papillosus, H. contortus and M. capillaris of various development stages. Sodium sulfate was effective against all stages of larvae of S. papillosus, and also against first-age M. capillaris. Nematocidal properties only against all stages of S. papillosus were exerted by copper sulfate pentahydrate. Non-invasive stages of S. papillosus nematodes were affected only by phosphoric acid, ammonium bicarbonate, calcium chloride, sodium nitrite, calcium sulfate, potassium metabisulfite, tetrasodium pyrophosphate, sodium triphosphate and the same stages of M. capillaris—by phosphoric acid, sodium bisulfite and potassium nitrite. Full article