Search Results (15)

Background/Objectives: The present study aims to assess the success rate of a CAD/CAM nickel–titanium wire (Memotain^®) used as a fixed orthodontic retainer, over a one-year period. Methods: A retrospective study was conducted on 338 CAD/CAM nickel–titanium (Memotain^®) fixed retention wires in 205 patients, bonded by a single experienced operator between January 2017 and December 2020. Follow-up visits were scheduled 6 (T1) and 12 months (T2) post-bonding. At each follow-up visit, events (defined as debonding, breakage, retainer loss, or tooth displacement) were classified by tooth, and success or failure of the retainer was determined based on the presence or absence of these events. Results: For the mandibular arch at T1 (6 months), the success rate was 85%, with debonding (n = 46) being the only event observed. At T2 (12 months), the success rate was 77%, with debonding (n = 30), wire breakage (n = 5) and retainer loss (n = 18) having occurred. For the maxillary arch, the overall success rate was 83% at T1 and 78% at T2. Debonding was the most common event observed over the 12-month observation period (n = 29), followed by retainer loss (n = 20) and wire breakage (n = 3). The overall success rates per type of tooth in the upper arch were 86% for the premolars, 96% for the canines, 95% for the lateral incisors and 93% for the central incisors. For the mandibular arch the success rates were 92% for the premolars, 97% for the canines, 96% for the lateral incisors and 94% for the central incisors. Conclusions: CAD/CAM nickel–titanium fixed retainers (Memotain^®) demonstrated promising 1-year survival rates in both arches, though long-term multicentre studies are needed to confirm their reliability. Full article

This study aims to evaluate the ability of an artificial intelligence (AI) model developed for use in the field of orthodontics to accurately and reliably classify skeletal maturation stages of individuals using hand–wrist radiographs. A total of 809 grayscale hand–wrist radiographs (250 × 250 px; pre-peak n = 400, peak n = 100, post-peak n = 309) were analyzed using four complementary image-based feature extraction methods: Local Binary Pattern (LBP), Histogram of Oriented Gradients (HOG), Zernike Moments (ZM), and Intensity Histogram (IH). These methods generated 2355 features per image, of which 2099 were retained after variance thresholding. The most informative 1250 features were selected using the ANOVA F-test and classified with a stacking-based machine learning (ML) architecture composed of Light Gradient Boosting Machine (LightGBM) and Logistic Regression (LR) as base learners, and Random Forest (RF) as the meta-learner. Across all evaluation folds, the average performance of the model was Accuracy = 83.42%, Precision = 84.48%, Recall = 83.42%, and F1 = 83.50%. The proposed model achieved 87.5% accuracy, 87.8% precision, 87.5% recall, and an F1-score of 87.6% in 10-fold cross-validation, with a macro-average area under the ROC curve (AUC) of 0.96. The pre-peak stage, corresponding to the period of maximum growth velocity, was identified with 92.5% accuracy. These findings indicate that integrating handcrafted radiographic features with ensemble learning can enhance diagnostic precision, reduce observer variability, and accelerate evaluation. The model provides an interpretable and clinically applicable AI-based decision-support tool for skeletal maturity assessment in orthodontic practice. Full article

Three-dimensional (3D) printing has emerged as a transformative technology in dental splint fabrication, offering significant advancements in customization, production speed, material efficiency, and patient comfort. This comprehensive review synthesizes the current literature on the clinical use, benefits, limitations, and future directions of 3D-printed dental splints across various disciplines, including prosthodontics, orthodontics, oral surgery, and restorative dentistry. Key 3D printing technologies such as stereolithography (SLA), digital light processing (DLP), and material jetting are discussed, along with the properties of contemporary photopolymer resins used in splint fabrication. Evidence indicates that while 3D-printed splints generally meet ISO standards for flexural strength and wear resistance, their mechanical properties are often 15–30% lower than those of heat-cured PMMA in head-to-head tests (flexural strength range 50–100 MPa vs. PMMA 100–130 MPa), and study-to-study variability is high. Some reports even show significantly reduced hardness and fatigue resistance in certain resins, underscoring material-specific heterogeneity. Clinical applications reviewed include occlusal stabilization for bruxism and temporomandibular disorders, surgical wafers for orthognathic procedures, orthodontic retainers, and endodontic guides. While current limitations include material aging, post-processing complexity, and variability in long-term outcomes, ongoing innovations—such as flexible resins, multi-material printing, and AI-driven design—hold promise for broader adoption. The review concludes with evidence-based clinical recommendations and identifies critical research gaps, particularly regarding long-term durability, pediatric applications, and quality control standards. This review supports the growing role of 3D printing as an efficient and versatile tool for delivering high-quality splint therapy in modern dental practice. Full article

Background and Objectives: Halitosis is a persistent oral health issue that can undermine self-esteem and social interactions, particularly in younger populations who may be more vulnerable to peer judgment. Orthodontic retainers—both removable and fixed—can alter oral microbiota and salivary parameters, potentially influencing malodor development. This study aimed to compare halitosis severity and oral-health-related quality of life (OHRQoL) in adolescents and young adults (aged 12–25) wearing removable retainers, fixed retainers, or no orthodontic appliances, with an additional focus on salivary pH as a possible modifying factor. Methods: A total of 88 participants were allocated into three groups: removable retainer (n = 28), fixed retainer (n = 30), and no orthodontic treatment (n = 30). Halitosis severity was measured via organoleptic evaluation (0–5 scale) and the Halitosis Associated Life-Quality Test (HALT, 0–100). Salivary pH was determined using a digital pH meter. OHRQoL was assessed through the Oral Health Impact Profile–14 (OHIP-14, 0–56). One-way ANOVA with Tukey’s post hoc test and chi-square analyses were employed to compare outcomes among groups. Spearman’s correlation explored relationships among HALT, organoleptic scores, OHIP-14, and salivary pH. Results: Fixed retainer wearers exhibited higher mean organoleptic scores (2.2 ± 0.6) compared to removable retainer users (1.7 ± 0.5, p = 0.003). HALT results similarly showed that the fixed retainer group (35.6 ± 6.4) reported more halitosis-related burdens than the removable group (31.4 ± 5.9, p = 0.015). Low salivary pH (<6.8) was linked to greater malodor indices in all cohorts (p < 0.05). Correlations revealed moderate positive associations between HALT and OHIP-14 (r = +0.52, p < 0.001). Conclusions: Adolescents and young adults wearing fixed orthodontic retainers reported more severe halitosis and a correspondingly lower oral-health-related quality of life than those with removable retainers or no orthodontic appliances. Salivary pH emerged as an influential factor, indicating that maintaining a neutral oral environment could mitigate malodor. Targeted interventions emphasizing hygiene and saliva management may improve overall well-being in this vulnerable age group. Full article

Background: The prevalence of gingival recessions (GRs) in the global population is 78%. A long-term study showed a 47% increase in the prevalence of GRs five years post-orthodontic treatment, particularly in the lower anterior region. It can be caused and/or exacerbated after orthodontic treatment, where the retainer placed can induce tooth movement or when it fails to maintain a passive position upon bonding. Thus, the goal of this case report was to present treatments for gingival recessions, with the approaches of the laterally closed tunnel technique and parallel incision methods, after orthodontic treatment in patients using non-passive lingual retainers. Methods: This case report adhered to the CARE guidelines. Three healthy patients were referred due to GR defects in the lower anterior region (RT1 and RT2). All patients had GR associated with deficient lingual-fixed orthodontics retainers. The same experienced periodontist (ATD) developed the surgeries and aimed to achieve root coverage using the connective tissue graft associated with a coronally advanced flap (CAF) and modify the recipient area’s gingival phenotype. Results: In all cases, a new orthodontic treatment was not possible due to anatomical or patient-related factors. Outcomes after six months, three years, and five years are presented, encompassing clinical and esthetic evaluations. Conclusions: GRs must always be addressed by orthodontic therapy or lingual-fixed orthodontic retainers. In cases where dental elements are positioned outside the bone envelope, orthodontic treatment may be considered before root coverage surgery. Therefore, surgical intervention should be undertaken for the keratinized tissue and volume gain, independently of the tooth position. Modifying the phenotype in these situations is vital for the long-term maintenance of periodontal health. Full article

(1) Background: After more than a decade since their first description, Inadvertent Tooth Movements (ITMs) remain an adverse effect of orthodontic retainers without a clear etiology. To further investigate the link between ITMs and the mechanical properties of different retainers, the response upon vertical loading was compared in three retainer types (two stainless steel and one nickel–titanium). The influence of different reference teeth was also considered. (2) Methods: Three retainers (R1, R2, R3) were tested in a newly developed biomechanical analysis system (FRANS). They were bonded to 3D-printed models of the lower anterior jaw and vertically displaced up to 0.3 mm. Developing forces and moments were recorded at the center of force. (3) Results: The vertical displacement caused vertical forces (Fz) and labiolingual moments (My) to arise. These were highest in the lateral incisors (up to 2.35 ± 0.59 N and 9.27 ± 5.86 Nmm for R1; 1.69 ± 1.06 N and 7.42 ± 2.65 Nmm for R2; 3.28 ± 1.73 N and 15.91 ± 9.71 Nmm for R3) for all analyzed retainers and with the R3 retainer for all analyzed reference teeth, while the lowest Fz and My values were recorded with the R1 retainer. (4) Conclusions: Displacements of 0.2 mm and larger provided forces and moments which could be sufficient to cause unwanted torque movements, such as ITMs, in all analyzed retainers. Clinicians must be mindful of these risks and perform post-treatment checkups on patients with retainers of all materials. Full article

This case report presents a virtual treatment simulation of the orthodontic treatment and surgery-first orthognathic surgery employed to treat a patient with a repaired unilateral cleft lip and alveolus with Class III malocclusion and lower third facial asymmetry. The patient exhibited a negative overjet of 9 mm, a missing lower right second premolar, and a 5 mm gap between the upper right central and lateral incisors with midline discrepancy. The three-dimensional virtual planning began with virtual pre-surgical orthodontics, followed by the positioning of the facial bones and teeth in their ideal aesthetic and functional positions. The sequence of steps needed to achieve this outcome was then reverse-engineered and recorded using multiplatform Nemostudio software (Nemotec, Madrid, Spain), which facilitated both surgical and orthodontic planning. The treatment included a two-piece segmental maxillary osteotomy for dental space closure, a LeFort I maxillary advancement, and a mandibular setback with bilateral sagittal split osteotomy to correct the skeletal underbite and asymmetry. A novel approach was employed by pre-treating the patient for orthognathic surgeries at age 11, seven years prior to the surgery. This early phase of orthodontic treatment aligned the patient’s teeth and established the dental arch form. The positions of the teeth were maintained with retainers, eliminating the need for pre-surgical orthodontics later. This early phase of treatment significantly reduced the treatment time. The use of software to predict all the necessary steps for surgery and post-surgical orthodontic tooth movements made this approach possible. Multi-step virtual planning can be a powerful tool for analyzing complex craniofacial problems that require multidisciplinary care, such as cleft lip and/or palate. Full article

(1) Aims: The main objective of this retrospective study was to assess the long-term stability of difficult orthodontic treatments treated to an excellent result and to correlate stability to possible prognostic factors. Secondary objectives were to observe the changes in retention protocol over time and to assess Oral Health-related Quality of Life (OHRQoL) after a long-term post-treatment follow-up. (2) Methods: Cases presented for final examination by orthodontic postgraduate students were retrospectively screened for eligibility. Eligible patients were recalled for a post-treatment recall appointment (T2), consisting of a clinical examination and intraoral scan, and were asked to complete the Oral Health Impact Profile-14 (OHIP-14-DK). Gender, age at treatment commencement (T0), treatment modality and duration, and retention protocol were extracted from the records. At T2, the duration of the retention period was recorded, and retainers in place were clinically compared to the original retention protocol. The following variables were assessed on the sets of models at T0, T1 (end of treatment), and T2: arch length and width, overjet and overbite, Dental Aesthetic Index (DAI), Peer Assessment Rating score (PAR), and Little’s Irregularity Index (LII). Multiple regression models were conducted. (3) Results: Eighty-five subjects attended T2. The mean post-treatment follow-up was 9.4 years +/− 2.4. In the upper arch, at T1, 74 patients had a combination of fixed and removable retainers, while at T2, 55 had a fixed retainer only. In the lower arch, at T1, 67 patients had a fixed retainer only, with this number increasing to 76 at T2. From T0 to T1, the PAR score improved by 96.1%, with the improvement remaining at 77.5% at T2. The stability of lower inter-canine and upper inter-premolar widths was significantly correlated with the extent of changes during treatment. The presence of a lower fixed retainer at T2 and a low LII at T1 were prognostic factors for stability. The mean weighted total OHIP-14 score at T2 was very low (1.6 ± 2.4 points). (4) Conclusions: In a sample with an initial high-severity malocclusion and treated to an excellent outcome, long-term stability was very good. Good stability can be retained when a lower fixed retainer is present at T2 and when a low LII is achieved at T1. Full article

Retention constitutes a fundamental phase of orthodontic treatment, of which the patient must be made aware from the outset. Retention, which can be fixed or movable, has the task of maintaining over time and stabilising the results obtained during treatment. This study assessed the efficacy of using removable restraints versus fixed solutions for maintaining long-term outcomes. A comprehensive search across major databases—Pubmed, Web of Science, Scopus—used ‘relapse’ and ‘orthodontic’ as keywords to gather articles on relapse discussions. The primary focus was relapsed cases in post-fixed orthodontic therapy. Both fixed and removable retainer systems prove effective in preserving orthodontic achievements. While fixed devices require regular wire integrity checks, mobile devices require patient compliance, proper usage, and a recommended wear time. Studies indicate that fixed retainers are generally successful, with relapse rates varying based on the retainer type. Full-time use of removable devices surpasses night-only wear. Vacuum-formed and Hawley retainers offer similar effectiveness. Fixed retainers excel in long-term alignment stability, whereas removable ones have higher failure rates yet remain beneficial. Full article

Novel strategies to combat dental biofilms aim at reducing biofilm stability with the ultimate goal of facilitating mechanical cleaning. To test the stability of dental biofilms, they need to be subjected to a defined mechanical stress. Here, we employed an oral care device (Airfloss) that emits microbursts of compressed air and water to apply a defined mechanical shear to 14-day-old dental plaque in 20 healthy participants with no signs of oral diseases (clinical trial no. NCT05082103). Exclusion criteria included pregnant or nursing women, users of oral prostheses, retainers or orthodontic appliances, and recent antimicrobial or anti-inflammatory therapy. Plaque accumulation, before and after treatment, was assessed using fluorescence images of disclosed dental plaque on the central incisor, first premolar, and first molar in the third quadrant (120 images). For each tooth, the pre- and post-treatment plaque percentage index (PPI) and Turesky modification of the Quigley-Hein plaque index (TM-QHPI) were recorded. The mean TM-QHPI significantly decreased after treatment (p = 0.03; one-sample sign test), but no significant difference between the mean pre- and post-treatment PPI was observed (p = 0.09; one-sample t-test). These data are of value for researchers that seek to apply a defined mechanical shear to remove and/or disrupt dental biofilms. Full article

Although treatment with fixed or mobile appliances has become an important part of modern orthodontics, side effects such as white spot lesions (WSLs) have a negative impact on the aesthetic outcome of orthodontic treatment. The purpose of this article was to review current evidence on the diagnosis, risk assessment, prevention, management and post-orthodontic treatment of these lesions. Data collection was performed electronically, and the initial search using the keywords “white spot lesions”, “orthodontics”, “WSL”, “enamel” and “demineralization” in different combinations resulted in 1032 articles for the two electronic databases used. Ultimately, a total of 47 manuscripts were considered relevant to the aim of this research and included in this review. The results of the review indicate that WSLs remain a significant problem during orthodontic treatment. According to studies in the literature, the severity of WSLs correlates to the duration of treatment. Using toothpaste with more than 1000 ppm fluoride at home reduces the frequency of WSL separation and regular application of varnishes in the office reduces the frequency of the occurrence of WSLs only in the context of maintaining a strict hygiene regime. The old hypothesis that elastomeric ligatures retain more dental plaque than metal ones has been refuted. There are no differences in the appearance of WSLs between conventional brackets and self-ligating brackets. Clear aligner mobile devices develop fewer WSLs but are more extensive as opposed to conventional fixed devices, while lingual orthodontic appliances have a lower incidence of WSLs, and the most effective device for preventing these lesions is WIN, followed by Incognito. Full article

This study investigated the possibility of re-treating a calcium silicate-based sealer (CSBS), compared to an epoxy-resin sealer (RBS), using rotary instrumentation at different times from obturation (1 month/1 year). Thirty-six human mandibular premolars, extracted as a result of orthodontic or periodontal problems, were instrumented and randomly divided into three groups of 12: BR and BR*, which were filled with CSBS and re-treated after one month and one year of storage, respectively, and AH, which was filled with RBS and re-treated after one month. The same re-treatment protocol was used for all teeth, and the times required for the procedure was recorded. The re-treated specimens were longitudinally sectioned and examined at the stereomicroscope (SM) at 20× magnification. Image J Software was used to process the microphotographs. The percentage of residual filling materials in the root canal and the apical third, the ability to reach working length WL and patency, and the time taken to complete the re-treatment were recorded and analyzed by ANOVA and post hoc Bonferroni test (p = 0.05). Scanning electron microscopy (SEM) and coupled energy-dispersive spectroscopy (EDS) were applied to representative samples to evaluate canal cleanliness and chemical elements. Patency and WL were re-established in all of the teeth. Residual filling materials were retained in all specimens of the three groups. The mean percentage of residual materials was significantly different between BR and BR* (p-value = 0.048), with BR* showing the highest values. The mean time to complete re-treatment was significantly lower for AH, followed by BR (p = 0.0001) and BR* (p = 0.0078). Conclusions: After both medium and long storage periods, the CSBS can be concluded to have been successfully removed from canals with simple anatomy. Full article

In orthodontics, post-treatment retention phase is crucial for maintaining the obtained clinical results. In cases of crowding, a bonded fixed retainer is often chosen to maintain teeth alignment in the anterior sector of the lower dental arch. A fixed retainer can remain in the mouth for years. Therefore, it is important that it is applied with harmless materials for the level of plaque control. The present study aimed to investigate the salivary concentrations of Streptococcus mutans (S. mutans) and Lactobacilli, and the Sillness and Loe plaque index, in patients wearing metal wire versus fiberglass orthodontic retainers. Forty post-orthodontic patients were included in the sample: in 20 subjects a metal wire retainer was applied (MR), while in the others a fiberglass retainer was applied (FR). The variables were recorded at baseline (T0), after 1 month (T1), and after 2 months (T2) of follow-up. The percentage of patients with a level of S. mutans and Lactobacilli colonization > 10⁵ increased over time in the FR group (T0 = 0%, T1 = 5%, T2 = 35%), compared with the MR group. PI increased in the FR group (T0 = 0, T1 = 14, T2 = 27), and remained almost the same in the MR group (T0 = 3, T1 = 0, T2 = 2). From the present results it appears that the metal wire retainer is better than the fiberglass retainer for the level of plaque control performed by the patients. Full article

The bonded lingual retainer (BLR) is considered a favorable choice for retaining lower incisors’ alignment post-orthodontic treatment; however, it may cause some unwanted effects such as inadvertent tooth movement and torque changes. These often result in gingival recession (Miller class III-type) with exposure of the root surface, which compromises the esthetics and hinders the comfort of the patient. Fifteen post-orthodontic patients presenting Miller class III-type recessions with BLR were examined. Two protocols were used: the first included the removal of the BLR prior to surgery and the second included only a surgical approach. All patients underwent the same surgery of a modified tunnel double papilla procedure for root coverage. The gingival recession was measured using a dental probe before, and three to six months post-surgery. The average improvement in recession depth was significantly greater (p = 0.008) for the protocol that included removal of the BLR (4.0 ± 0.83 mm) with an improvement of 87.2% as compared to the second protocol that showed an improvement of 43.8% (1.88 ± 1.29 mm). Removing the BLR prior to surgery is beneficial for predictable root coverage in post-orthodontic Miller class III recessions. Full article

A 32-year-old man was referred to the Division of Orthodontics of the University of Naples “Federico II”, with a 15-year history of gradually increasing right-sided facial asymmetry. Clinical and radiological examinations was consistent to hemimandibular hyperplasia, a rare developmental asymmetry characterized by three-dimensional enlargement of one-half of the mandible. The standard surgical-orthodontic management was proposed to the patient. However, he refused to undergo bimaxillary orthognatic surgery. Therefore, a different treatment was proposed based on the orthodontic technique of pre-surgical decompensation and post-surgical refinement used in bimaxillary orthognatic surgery planning, and surgical intervention with a condylectomy. The dental arches were evenly levelled out with a multi-bracket treatment and then the condylectomy was performed. Orthodontic treatment continued with a levelling and torque control by 0.19 × 0.25 SS arch and physiotherapy. At the three-month follow-up, the patient showed anterior and posterior bite rebalancing, arch intercuspation recovery, and anterior open bite closure due to muscular self-rebalancing. The two-year follow-up showed regular mandibular dynamic, orthodontic appliances were removed, and the patient was instructed to wear retainer for the following months. The final result was aesthetically reasonable for the patient, although slight asymmetry of the chin persisted. Full article