Search Results (90)

Escalating requirements for smart energy management are driving advances in functional electrochromic devices (ECDs), which are pivotal for the regulation of light, heat, and reduction in energy consumption in buildings, transportation, and smart devices. However, the commercialization of ECDs is hindered by com plex designs, high fabrication costs, and slow switching speeds. Additive manufacturing (AM, 3D-printing) emerges as a promising approach to overcome these limitations, as it enables the creation of complex structures, enhances design flexibility, and can reduce production costs. For such printed devices, materials combining poly(ionic liquids) (PILs) with ionogels—an emerging and promising class of materials known for their high ionic conductivity, stability, and tunable properties—are particularly suitable for integration with 3D printing. Comparing previous reviews that address PILs, ionogels, or AM modalities in isolation, this work uniquely combines the structure–property–processing relationships specific to the synergistic integration of these fields. Current work highlights recent progress in PIL/ionogel-based ECDs and distills specific design guidelines for optimizing ink rheology, balancing ionic conductivity with mechanical integrity, and selecting appropriate printing modalities. These insights provide a roadmap for overcoming current fabrication challenges and scaling up next-generation smart devices. Full article

A flexible polyionic liquid (PIL) nanofiber membrane-supported phosphomolybdic acid catalyst (PM-PIL) was fabricated via stepwise chemical transformation of polyacrylonitrile (PAN) nanofiber membranes. The nitrile groups of PAN were converted into pyridine units, followed by quaternization and anion exchange with phosphomolybdic acid (PMo), resulting in a polyionic liquid membrane with uniformly immobilized PMo species. Benefiting from its nanofibrous architecture and ionic liquid characteristics, the PM-PIL membrane simultaneously acts as a heterogeneous catalyst and a Pickering emulsion stabilizer, enabling efficient interfacial catalytic oxidation desulfurization. The PM-PIL membrane exhibited excellent catalytic performance toward dibenzothiophene (DBT) oxidation in an H₂O₂-based model oil system. Under optimized conditions (60 °C, O/S = 150:1), more than 90% DBT removal was achieved within 90 min, and complete desulfurization was obtained within 2 h. Compared with phosphomolybdic acid and poly(pyridine), the PM-PIL membrane showed markedly enhanced activity and stability, maintaining over 90% efficiency after six cycles. Product analysis confirmed selective oxidation of DBT to dibenzothiophene sulfone. This work provides a robust and recyclable membrane-based catalytic platform for efficient oxidative desulfurization. Full article

This study reports the synthesis and catalytic evaluation of a series of imidazolium-based polymeric ionic liquids (PILs) for the cycloaddition of CO₂ to epichlorohydrin (ECH). The synthesized catalysts include homopolymers, poly(3-hydroxyethyl-1-vinylimidazole chloride) (p[HVIm][Cl]) and poly(3-carboxymethyl-1-vinylimidazole chloride) (p[CMVIm][Cl]), and their block copolymers with polystyrene, synthesized for the first time, pS-b-p[HVIm][Cl] and pS-b-p[CMVIm][Cl]. Structural characterization by NMR, IR spectroscopy, and gel permeation chromatography confirmed the successful synthesis. The block copolymers exhibited a low polydispersity index (PDI 1.1–1.2), which is indicative of homogeneous chain lengths and the propensity to form ordered nanostructures, whereas the homopolymers showed higher PDI (2.4–2.9). Catalytic testing at 90 °C and 1 MPa CO₂ for 4 h revealed a clear activity trend: p[CMVIm][Cl] < p[HVIm][Cl] < pS-b-p[CMVIm][Cl] < pS-b-p[HVIm][Cl], with conversions exceeding 75% for all catalysts and a maximum of 82.69% for pS-b-p[HVIm][Cl]. These results demonstrate that the catalytic performance of PILs is governed by a synergistic interplay between the local chemical functionality of the ionic moiety and the overall polymer architecture. Based on these results, the synthesized polymeric ionic liquids, particularly pS-b-p[HVIm][Cl], demonstrate strong potential for creating multifunctional materials. Their ability to self-assemble into ordered nanostructures with distinct hydrophobic and hydrophilic domains provides a foundational architecture for combined gas separation and catalysis. The observed “micellar catalytic effect”, which enhances local reagent concentration near active sites, could be leveraged in a membrane reactor to simultaneously capture and convert CO₂ directly within the membrane. This integrated “separation–reaction” approach represents a promising strategy for advancing circular carbon economy technologies. Full article

Polyampholytes combine cationic and anionic groups in one macromolecular platform and are emerging as versatile components for energy storage and conversion. This review synthesizes how their charge balance, hydration, and architecture can be engineered to address ionic transport, interfacial stability, and safety across batteries, supercapacitors, solar cells, and fuel cells. We classify annealed, quenched, and zwitterionic systems, outline molecular design strategies that tune charge ratio, distribution, and crosslinking, and compare device roles as gel or solid electrolytes, eutectogels, ionogels, binders, separator coatings, and interlayers. Comparative tables summarize ionic conductivity, cation transference number, electrochemical window, mechanical robustness, and temperature tolerance. Across Li and Zn batteries, polyampholytes promote ion dissociation, homogenize interfacial fields, suppress dendrites, and stabilize interphases. In supercapacitors, antifreeze hydrogels and poly(ionic liquid) networks maintain conductivity and elasticity under strain and at subzero temperature. In solar cells, zwitterionic interlayers improve work function alignment and charge extraction, while ordered networks in fuel cell membranes enable selective ion transport with reduced crossover. Design rules emerge that couple charge neutrality with controlled hydration and dynamic crosslinking to balance conductivity and mechanics. Key gaps include brittleness, ion pairing with multivalent salts, and scale-up. Opportunities include soft segment copolymerization, ionic liquid and DES plasticization, side-chain engineering, and operando studies to guide translation. Full article

The pursuit of sustainable and environmentally benign energy storage solutions has propelled significant interest in organic batteries, which utilize redox-active organic compounds as electrode materials. A pivotal component in determining their electrochemical performance, safety, and long-term stability is the electrolyte. Polymer-based electrolytes (PBEs) have emerged as promising candidates owing to their intrinsic advantages, such as enhanced thermal stability, mechanical integrity, and the mitigation of leakage and flammability risks associated with conventional liquid electrolytes. Unlike previous reviews that broadly cover solid electrolytes, this review specifically focuses on the unique developments of polymer-based electrolytes tailored for organic batteries over the past few years. This review presents a comprehensive overview of the recent progress in PBEs specifically designed for organic battery systems. It systematically examines various categories, including solid polymer electrolytes (SPEs), valued for their structural simplicity and stability; gel polymer electrolytes (GPEs), noted for their high ionic conductivity and processability; and polymer-inorganic composite electrolytes, which synergistically integrate the mechanical flexibility of polymers with the ionic conductivity of inorganic fillers. Additionally, the review delves into the latest advancements in ionogels and poly(ionic liquid) electrolytes, highlighting their potential to overcome existing limitations and enable next-generation battery performance. The article concludes with a critical discussion on prevailing challenges and prospective research directions, emphasizing the importance of advanced material design, interfacial engineering, and sustainable synthesis approaches to facilitate the practical realization of high-performance organic batteries. Full article

Poly(ionic liquids) (PILs) show great promise as a new class of solid electrolytes for energy applications, including high-temperature polymer electrolyte fuel cells, owing to their combination of the unique electrochemical properties of ionic liquids and macromolecular architecture. In this study, we prepared and characterized PIL-based composite polymer electrolyte membranes containing silica nanofibers (SiO₂NFs). The SiO₂NFs were prepared via electrospinning, followed by calcination, and were used as a thermally and mechanically stable, porous substrate. The crosslinked protic PIL was synthesized via in situ radical polymerization of imidazolium hydrogensulfate-based reagents (one monomer and one crosslinker). It was then used as the membrane matrix. The prepared freestanding PIL membranes remained thermally stable at temperatures of up to 180 °C. Furthermore, the PIL/SiO₂NF composite electrolyte membranes demonstrated improved mechanical properties due to reinforcement by the NF framework. These composite membranes also exhibited relatively high proton conductivity (approximately 0.1 to 1 mS/cm) in the 100–150 °C temperature range. Full article

Over the past few decades, lithium-ion batteries (LIBs) have gained significant attention due to their inherent potential for environmental sustainability and unparalleled energy storage efficiency. Meanwhile, polymer electrolytes have gained popularity in several fields due to their ability to adapt to various battery geometries, enhanced safety features, greater thermal stability, and effectiveness in reducing dendrite growth on the anode. However, their relatively low ionic conductivity compared to liquid electrolytes has limited their application in high-performance devices. This limitation has led to recent studies revolving around the development of poly(ionic liquids) (PILs), particularly imidazolium-mediated polymer backbones as novel electrolyte materials, which can increase the conductivity with fine-tuning structural benefits, while maintaining the advantages of both solid and gel electrolytes. In this study, a curated dataset of 120 data points representing eight different polymers was used to predict ionic conductivity in imidazolium-based PILs as well as the emerging ionene substructures. For this purpose, four ML models: CatBoost, Random Forest, XGBoost, and LightGBM were employed by incorporating chemical structure and temperature as the models’ inputs. The best-performing model was further employed to estimate the conductivity of novel ionenes, offering insights into the potential of advanced polymer architectures for next-generation LIB electrolytes. This approach provides a cost-effective and intelligent pathway to accelerate the design of high-performance electrolyte materials. Full article

To address the challenge of ultra-deep desulfurization in fuels, a series of heteropolyacid-based poly(ionic liquid) catalysts (C4-PIL@PW, C8-PIL@PW, and C16-PIL@PW) were synthesized via radical polymerization and anion exchange methods. The prepared catalysts were characterized via FT-IR, XRD pattern, and Raman spectroscopy. Optimal reaction parameters (e.g., temperature, catalyst dosage, and O/S molar ratio) were systematically investigated, as well as the catalytic mechanism. The typical sample C8-PIL@PW exhibited exceptional oxidative desulfurization (ODS) performance, achieving a sulfur removal of 99.2% for dibenzothiophene (DBT) without any organic solvent as extractant. Remarkably, the sulfur removal could still retain 89% after recycling five times without regeneration. This study provides a sustainable and high-efficiency catalyst for ODS, offering insights into fuel purification strategies. Full article

In the past, powder-like microwave absorbers have made notable breakthroughs in performance enhancements, but complicated processes and undesirable properties have limited their practical application. Herein, a novel poly(ionic liquid) (PIL)-based ionic gel with excellent microwave absorption properties was prepared via a facile UV-initiated polymerization method. By simply adjusting the mole ratio of the polymerizable ionic liquid (IL)monomer and the IL dispersion medium, the microwave absorption properties of the obtained ionic gels can be tuned. A maximum reflection loss (RL_max) of −45.7 dB and an effective absorption bandwidth (EAB) of 8.08 GHz were achieved, which was mainly ascribed to high ionic conduction loss induced by the high content of the dispersion medium. Furthermore, it displayed recyclable, adhesive, and self-healing properties, thus providing a new candidate for developing efficient microwave absorbers for practical applications. Full article

Strategic utilization of carbon dioxide as both a carbon mitigation tool and a sustainable C1 feedstock represents a pivotal pathway toward green chemistry. Although poly(ionic liquid)s (PILs) exhibit promise in CO₂ conversion, conventional divinylbenzene (DVB) cross-linked architectures are limited by reduced ionic density and limited accessibility of active sites. Herein, we reported a binuclear imidazolium-functionalized PIL catalyst (P-BVIMCl), synthesized through a simple self-polymerization process, derived from rationally designed ionic liquid monomers formed by quaternization of 1,4-bis(chloromethyl)benzene with N-vinylimidazole. The dual active sites in P-BVIMCl-quaternary ammonium cation (N⁺) and nucleophilic chloride anion (Cl⁻) synergistically enhanced CO₂ adsorption/activation and epoxide ring-opening. Under optimal catalyst preparation conditions (100 °C, 24 h, water/ethanol = 1:3 (v/v), 10 wt% AIBN initiator) and reaction conditions (100 °C, 2.0 MPa CO₂, 10 mmol epichlorohydrin, 6.7 wt% catalyst loading, 3.0 h), P-BVIMCl catalyzed the synthesis of glycerol carbonate (GLC) with a yield of up to 93.4% and selectivity of 99.6%, maintaining activity close to 90% after five cycles. Systematic characterization and density functional theory (DFT) calculations confirmed the synergistic activation mechanism. This work established a paradigm for constructing high-ionic-density catalysts through molecular engineering, advancing the development of high-performance PILs for industrial CO₂ valorization. Full article

Covalent organic frameworks (COFs) hold promising potential as high-temperature proton conductors due to their highly ordered nanostructures and high specific surface areas. However, due to their limited functional groups and poor membrane-engineering properties, finding practical applications for COF-based proton-conducting materials still remains challenging. Herein, we proposed a universal strategy to fabricate proton-conducting composite membranes by the incorporation of sulfonic acid-bearing COFs and zwitterionic poly(ionic liquid)s (PILs) via in situ polymerization. Zwitterionic PILs with methanesulfonate counter ions can work as the intrinsic proton sources, and the sulfonic acid groups on the COF nanochannels can act as the extrinsic proton suppliers. Benefiting from the spatial nanoconfinement of long-range ordered nanochannels and the enhanced electrostatic interactions with PILs, the COFs with high densities of sulfonic acid groups can endow the as-prepared composite membrane (PIL@TpBD(SO₃H)₂) with a comparable anhydrous proton conductivity of 3.20 × 10⁻³ S cm⁻¹ at 90 °C, which is much higher than that of conventional Nafion (~10⁻⁵ S cm⁻¹ at 90 °C under anhydrous condition). ¹H NMR DOSY spectra reveal that both the diffusion and dissociation of protons can be drastically facilitated upon nanoconfinement, demonstrating the promising efficiency of nanochannels in proton conduction. Moreover, the obtained composite membranes possess outstanding mechanical and thermal stability, which is crucial for their practical application. This study demonstrates proton conduction elevation in nanoconfined PILs and provides a promising insight into the engineering of stable COF-based proton-conducting materials. Full article

Understanding the interplay between the molecular structure of the ionic liquid (IL) subunit, the resulting nanostructure and ion transport in polymerized ionic liquids (PILs) is necessary for the realization of high-performance solid-state electrolytes required in various advanced applications. Herein, we present a detailed structural characterization of a recently synthesized series of acrylate-based PIL homopolymers and networks with imidazolium cations and chloride anions with varying alkyl spacer and terminal group lengths designed for organic solid-state batteries based on X-ray scattering. The impact of the concentrations of both the crosslinker and added tetrabutylammonium chloride (TBACl) conducting salt on the structural characteristics is also investigated. The results reveal that the length of both the spacer and terminal group influence the chain packing and, in turn, the nanophase segregation of the polar domains. Long spacers and terminal groups seem to induce denser polar aggregates sandwiched between more compact alkyl spacer and terminal group domains. However, the large inter-backbone spacing achieved seems to limit the ionic conductivity of these PILs. More importantly, our findings show that the previously reported general relationships between the ionic conductivity and the structural parameters of the nanostructure of PILs are not always attainable for different molecular structures of the IL side group. Full article

This article presents a method for producing chiral ionic liquid-based polyurea microcapsules that can be magnetically separated. The method involves entrapping hydrophilic magnetic nanoparticles within chiral polyurea microspheres. The synthetic process for creating these magnetic polyurea particles involves oil-in-oil (o/o) nano-emulsification of an ionic liquid-modified magnetite nanoparticle (MNPs-IL) and an ionic liquid-based diamine monomer, which comprises a chiral bis(mandelato)borate anion, in a nonpolar organic solvent, toluene, and contains a suitable surfactant. This is followed by an interfacial polycondensation reaction between the isocyanate monomer, polymethylenepolyphenyl isocyanate (PAPI 27), and the chiral diamine monomer, which generates chiral polyurea microcapsules containing magnetic nanoparticles within their cores. The microcapsules generated from the process are then utilized to selectively adsorb either the R or S enantiomer of tryptophan (Trp) from a racemic mixture that is dissolved in water, in order to evaluate their chiral recognition capabilities. During the experiments, the magnetically separable chiral poly(ionic liquid) microcapsules, which incorporated either the R or S isomer of chiral bis(mandelato)borate, exhibited exceptional enantioselective adsorption performance. Thus, the chiral polymeric microcapsules embedded with the R-isomer of the bis(mandelato)borate anion demonstrated significant selectivity for adsorbing L-Trp, yielding a mixture with 70% enantiomeric excess after 96 h. In contrast, microcapsules containing the S-isomer of the bis(mandelato)borate anion preferentially adsorbed D-Trp, achieving an enantiomeric excess of 73% after 48 h. Full article

The escalating emissions of CO₂ into the atmosphere require the urgent development of technologies aimed at mitigating environmental impacts. Among these, aqueous amine solutions and polymeric membranes, such as cellulose acetate and polyimide are commercial technologies requiring improvement or substitution to enhance the economic and energetic efficiency of CO₂ separation processes. Ionic liquids and poly(ionic liquids) (PILs) are candidates to replace conventional CO₂ separation technologies. PILs are a class of materials capable of combining the favorable gas affinity exhibited by ionic liquids (ILs) with the processability inherent in polymeric materials. In this context, the synthesis of the IL GLYMIM[Cl] was performed, followed by ion exchange processes to achieve GLYMIM variants with diverse counter anions (NTf₂⁻, PF₆⁻, and BF₄). Subsequently, PIL membranes were fabricated from these tailored ILs and subjected to characterization, employing techniques such as SEC, FTIR, DSC, TGA, DMA, FEG-SEM, and CO₂ sorption analysis using the pressure decay method. Furthermore, permeability and ideal selectivity assessments of CO₂/CH₄ mixture were performed to derive the diffusion and solubility coefficients for both CO₂ and CH₄. PIL membranes exhibited adequate thermal and mechanical properties. The PIL-BF₄ demonstrated CO₂ sorption capacities of 33.5 mg CO₂/g at 1 bar and 104.8 mg CO₂/g at 10 bar. Furthermore, the PIL-BF₄ membrane exhibited permeability and ideal (CO₂/CH₄) selectivity values of 41 barrer and 44, respectively, surpassing those of a commercial cellulose acetate membrane as reported in the existing literature. This study underscores the potential of PIL-based membranes as promising candidates for enhanced CO₂ capture technologies. Full article

Repairing damaged tissue caused by bacterial infection poses a significant challenge. Traditional antibacterial hydrogels typically incorporate various components such as metal antimicrobials, inorganic antimicrobials, organic antimicrobials, and more. However, drawbacks such as the emergence of multi-drug resistance to antibiotics, the low antibacterial efficacy of natural agents, and the potential cytotoxicity associated with metal antibacterial nanoparticles in hydrogels hindered their broader clinical application. In this study, we successfully developed imidazolium poly(ionic liquids) (PILs) polymer microspheres (APMs) through emulsion polymerization. These APMs exhibited notable antibacterial effectiveness and demonstrated minimal cell toxicity. Subsequently, we integrated the APMs into a gelatin methacryloyl (GelMA)—polyethylene glycol (PEG) hydrogel. This composite hydrogel not only showcased strong antibacterial and anti-inflammatory properties but also facilitated the migration of human skin fibroblasts (HSF) and human umbilical vein endothelial cells (HUVECs) and promoted osteogenic differentiation in vitro. Full article