Search Results (34)

The Danube–Tisza Interfluve in central Hungary, a key region for Quaternary paleoenvironmental reconstruction, hosts ephemeral saline lakes that serve as highly sensitive archives of past climate variability but are increasingly threatened by desertification. Carbonate-rich lacustrine deposits within these systems form through a complex interplay of biogenic CO₂ uptake and inorganic precipitation driven by evaporation. To refine paleoenvironmental reconstructions from these archives, a lacustrine sediment core was analysed using XRPD for mineralogy and XRF for major and trace element geochemistry. The results reveal four distinct environmental phases: a cold, siliciclastic-dominated Late Glacial period (c. 23,600–13,400 cal BP); an abrupt shift to massive autogenic carbonate production during the warmer Late Glacial Interstadial, which was also marked by intense aeolian activity (Zr enrichment); the development of a Holocene fen (from c. 11,200 cal BP) with fluctuating hydrology; and a recent interval (from c. 800 cal BP) showing extreme enrichment in phosphorus, lead, and sulphur from anthropogenic sources. Full article

In this study, the influence of annealing on the phase evolution and mechanical properties of the Fe₆₂Ni₁₈P₁₃C₇ (at.%) alloy was investigated. Ribbons produced via melt-spinning were annealed at various temperatures, and their structural transformations and hardness were evaluated. The alloy exhibited a narrow supercooled liquid region (ΔT_x ≈ 22 °C), confirming its low glass-forming ability (GFA). Primary crystallization began at approximately 380 °C with the formation of α-(Fe,Ni) and Fe₂NiP, followed by the emergence of γ-(Fe,Ni) phase at higher temperatures. A significant increase in hardness was observed after annealing up to 415 °C, primarily due to nanocrystallization and phosphide precipitation. Further heating resulted in a hardness plateau, followed by a noticeable decline. Additionally, samples were produced via selective laser melting (SLM). The microstructure of the SLM-processed material revealed extensive cracking and the coexistence of phosphorus-rich regions corresponding to Fe₂NiP and iron-rich regions associated with γ-(Fe,Ni). Full article

Rare earth elements (REEs) have garnered significant global attention due to their essential role in advanced technologies. Sri Lanka is endowed with various REE-bearing minerals, including the apatite-rich deposit in the Eppawala area, commonly known as Eppawala rock phosphate (ERP). However, direct extraction of REEs from ERP is technically challenging and economically unfeasible. This study introduces a novel, integrated approach for recovering REEs from ERP as a by-product of nitrophosphate fertilizer production. The process involves nitric acid-based acidolysis of apatite, optimized at 10 M nitric acid for 2 h at 70 °C with a pulp density of 2.4 mL/g. During cooling crystallization, 42 wt% of calcium was removed as Ca(NO₃)₂.4H₂O while REEs remained in the solution. REEs were then selectively precipitated as REE phosphates via pH-controlled addition of ammonium hydroxide, minimizing the co-precipitation with calcium. Further separation was achieved through selective dissolution in a sulfuric–phosphoric acid mixture, followed by precipitation as sodium rare earth double sulfates. The process achieved over 90% total REE recovery with extraction efficiencies in the order of Pr > Nd > Ce > Gd > Sm > Y > Dy. Samples were characterized for their phase composition, elemental content, and morphology. The fertilizer results confirmed the successful production of a nutrient-rich nitrophosphate (NP) with 18.2% nitrogen and 13.9% phosphorus (as P₂O₅) with a low moisture content (0.6%) and minimal free acid (0.1%), indicating strong agronomic value and storage stability. This study represents one of the pioneering efforts to valorize Sri Lanka’s apatite through a novel, dual-purpose, and circular approach, recovering REEs while simultaneously producing high-quality fertilizer. Full article

Sediments are important repositories for microplastics (MPs) which exhibit higher microbial community richness and greater diversity than corresponding aqueous phases. Recently, the effects of MPs on microorganisms in sediments have received widespread attention. This review summarizes current knowledge on how MPs alter microbial diversity, composition, function, and biogeochemical cycling in sedimentary environments. The impacts of MPs on microorganisms in sediments can be affected by several factors, including MP type, the sedimentary environment, exposure time, and exposure concentration. Generally, biodegradable MPs cause more significant changes to the microbial community structure in sediments due to degradability and high bioavailability. Short-term exposure to MPs may enhance microbial diversity, and long-term exposure may lead to a reduction in diversity. High concentrations cause more serious impacts on microbial diversity than low concentrations. MPs mainly interfere with cycles of carbon, nitrogen, phosphorus, and sulfur in the sedimentary environment by changing microbial community structure, enzyme activity, and gene abundance. In conclusion, key research gaps are pinpointed, and future research directions presented. This review provides valuable insights into the health risks and ecological responses of MPs in sedimentary environments. Full article

Xanthan is a highly relevant commercial microbial biopolymer. Its production occurs in two steps: the bacterium is cultivated in a nitrogen-rich medium for cell multiplication, and the obtained biomass is used as an inoculum for the polymer production phase. Different media compositions for cell growth were investigated, seeking to reduce or replace the peptone used in the standard medium. Peptone (P), yeast extract (YE), and rice parboiling water (RPW) concentration combinations were tested in cultivating Xanthomonas arboricola pv. pruni 101. A CRD 2³ design, performed in a shaker, was used to assess the effects of independent variables on xanthan pruni microbial growth, N consumption, yield, viscosity, pseudoplasticity, and xanthan mineral content. After 24 h an increase in N was observed, without any significant impact on cell growth. Xanthan yield increased as a result of the alternative treatments, with P and YE influencing positively. However, T1, with the lowest levels of P, YE, and RPW increased viscosity and pseudoplasticity of xanthan pruni. RPW increased phosphorus, silicon, calcium, and magnesium, and P and YE increased potassium. These results indicate that partial replacement of P by RPW and YE is an economically viable and sustainable approach for the xanthan pruni production. Full article

Objectives: This study investigates the impact of nutrient availability on the growth, adhesion, and biofilm formation of Pseudomonas aeruginosa ATCC 27853 under static conditions. Methods: Bacterial behaviour was evaluated in nutrient-rich Luria–Bertani (LB) broth and nutrient-limited M9 media, specifically lacking carbon (M9-C), nitrogen (M9-N), or phosphorus (M9-P). Bacterial adhesion was analysed microscopically during the transition from reversible to irreversible attachment (up to 120 min) and during biofilm production/maturation stages (up to 72 h). Results: Results demonstrated that LB and M9 media supported bacterial growth, whereas nutrient-starved conditions halted growth, with M9-C and M9-N inducing stationary phases and M9-P leading to cell death. Fractal analysis was employed to characterise the spatial distribution and complexity of bacterial adhesion patterns, revealing that nutrient-limited conditions affected both adhesion density and biofilm architecture, particularly in M9-C. In addition, live/dead staining confirmed a higher proportion of dead cells in M9-P over time (at 48 and 72 h). Conclusions: This study highlights how nutrient starvation influences biofilm formation and bacterial dispersion, offering insights into the survival strategies of P. aeruginosa in resource-limited environments. These findings should contribute to a better understanding of biofilm dynamics, with implications for managing biofilm-related infections and industrial biofouling. Full article

The intensive variables, geochemical, mineralogical, and petrogenetic constraints of the Iberian peraluminous rare metal granites (RMGs), many of them unknown, are presented. The mineral chemistry of ore and gangue minerals, whole rock analyses, geothermobarometry, melt water and phosphorus contents, mass balance, and Rayleigh modeling were performed to achieve these objectives. These procedures allow us to distinguish two main contrasting granitic types: Nb-Ta-rich and Nb-Ta-poor granites. The former have lower crystallization temperatures, higher water contents, and lower emplacement pressures than Nb-Ta-poor granites. Nb-Ta-rich granites also have higher fluoride contents, strong fractionation into geochemical twins, higher Na contents, and different evolutionary trends. At the deposit scale, the fractional crystallization of micas properly explains the variation in the Ta/Nb ratio in both Nb-Ta-poor and Nb-Ta-rich RMGs, although in higher-grade granites, the variation is not as clear due to the action of fluids. Fluid phase separation processes especially occurred in the Nb-Ta rich granites, thus transporting halogens and metals that increased the grades in the top and sometimes in the core of granites. Gas-driven filter pressing processes facilitated the migration of fluid and melt near solidus melt in Nb-Ta-rich granites. The geochemical signature of the Iberian rare metal granites mainly follows the trends of two-mica granites and P-rich cordierite granites, but also of granodiorites. Full article

Black phosphorus (BP), as a direct band gap semiconductor material with a two-dimensional layered structure, has a good application potential in many aspects, but the surface state of it is extremely unstable, especially that of single-layer black phosphorus. In this study, BP crystals and two-dimensional black phosphorus (2D BP) are prepared by a mechanical ball-milling–liquid-phase exfoliation method. The X-ray diffraction (XRD) spectrum and high-resolution transmission electron microscopy (HRTEM) results showed that red phosphorus (RP) successfully turned to BP by the mechanical ball-milling method. The spectrophotometric analysis has detected absorption peaks at 780 nm, 915 nm, and 1016 nm, corresponding to single, double, and three-layer BP bandgap emission. A simple solvothermal strategy is designed to synthesize in-plane BP/P-rich transition metal phosphide (TMP) heterostructures (BP/NiP₃) by defect/edge-selective growth of NiP₃ on the BP nanosheets. HRTEM analysis indicates that the metal ions are preferentially deposited on the defects of 2D BP such as edges and unsaturated sites, forming a 2D BP/NiP₃ in-plane heterojunction. Full article

Liquid side-streams from food industries can be processed and used in food applications and contribute to reduce the environmental footprint of industries. The goal of this study was to evaluate the effectiveness and applicability of protein and phosphorus separation processes, namely microfiltration, ultrafiltration and flocculation, using protein-rich process waters with low (LS) and high (HS) salt content from the processing of salted cod (Gadus morhua). The application of different flocculants (chitosan lactate and Levasil RD442) were evaluated at different concentrations and maturation periods (0, 1 or 3 h). The results showed that different flocculation treatments resulted in different recoveries of the nutrients from LS and HS. Proteins in LS could be most efficiently recovered by using Levasil RD442 0.25% and no maturation period (51.4%), while phosphorus was most efficiently recovered when using Levasil RD442 1.23% and a maturation period of 1 h (34.7%). For HS, most of its protein was recovered using Levasil RD442 1.23% and a maturation period of 1 h (51.8%), while phosphorus was recovered the most using Levasil 1.23% and no maturation period (47.1%). The salt contents allowed interactions through intermolecular forces with Levasil RD442. The ultrafiltration method was effective on HS since it recovered higher percentages of nutrients in the retentate phase (57% of the protein and 46% of the phosphorus) compared to LS. Full article

Given the accelerating depletion of iron ore resources, there is growing concern within the steel industry regarding the availability of high-phosphorus iron ore. However, it is important to note that the utilization of high-phosphorus iron ore may result in elevated phosphorus content and notable fluctuations in molten iron, thereby imposing additional challenges on the dephosphorization process in steelmaking. The most urgent issue in the process of converter steelmaking is how to achieve efficient dephosphorization. In this study, the influence of various factors on the logarithm of the phosphorus balance distribution ratio ($\lg L_{\mathrm{p}}$), the logarithm of the P₂O₅ activity coefficient ($\lg {\gamma }_{{\mathrm{P}}_2{\mathrm{O}}_5}$), and the logarithm of the phosphorus capacity ($\lg C_{\mathrm{p}}$) were examined through thermodynamic calculations. The impact of each factor on dephosphorization was analyzed, and the optimal conditions for the dephosphorization stage of the converter were determined. Furthermore, the influence of basicity and Fe_tO content on the form of phosphorus in the slag was analyzed using FactSage 7.2 software, and the precipitation rules of the slag phases were explored. The thermodynamic calculation results indicated that increasing the basicity of the dephosphorization slag was beneficial for dephosphorization, but it should be maintained below 3. The best dephosphorization effect was achieved when the Fe_tO content was around 20%. The reaction temperature during the dephosphorization stage should be kept low, as the dephosphorization efficiency decreased sharply with the increasing temperature. In dephosphorization slag, Ca₃(PO₄)₂ usually formed a solid solution with Ca₂SiO₄, so the form of phosphorus in the slag was mainly determined by the precipitation form and content of Ca₂SiO₄. The phases in the dephosphorization slag mainly consisted of a phosphorus-rich phase, an iron-rich phase, and a matrix phase. The results of scanning electron microscopy and X-ray diffraction analyses were consistent with the thermodynamic calculation results. Full article

A high pH, low solubility of bound plant nutrients, and negative impacts on microbial communities are common drawbacks of biomass ash (BA) vermicomposting. In this study, nutrient-rich BA mixed with cow manure was tested at three different application rates to obtain final nitrogen (N), phosphorus (P), and potassium (K) contents of 3.5%, 7.0%, and 10.0% for bio-based fertilizers via vermicomposting. The results showed that all BA blends made with cow manure increased fermentation temperatures and allowed successful worm activity during the subsequent vermicomposting phase. The order of indicator enzyme activities in all vermicomposting samples was urease (220 μg NH₄ g⁻¹ h⁻¹) > β-glucosidase (95 μg PNP g⁻¹ h⁻¹) > alkaline phosphatase (91 μg PNP g⁻¹ h⁻¹) > arylsulfatase (83 μg PNP g⁻¹ h⁻¹) > acid phosphatase (60 μg PNP g⁻¹ h⁻¹). As an indicator of nutrient bioavailability, high correlations were observed between enzyme activities and microbial diversity in vermicompost samples. Determination coefficients (R²) obtained from multiple linear regressions between enzyme activities and bacterial population for T₀, T₁, T₂, and T₃ were determined as 0.90, 0.65, 0.73, and 0.90, respectively. According to a novel metagenome-based approach proposed within the scope of the present study, the stimulatory effects of Flavobacteriales, Burkholderiales, Saccharimonadales, and Pseudomonadales on enzyme activities for the nutrient solubility were found to be significant and positive. The findings of this study demonstrated that worm composting could be a sustainable bio-based technology for the production of slow-release fertilizer from nutrient-rich waste material. Full article

This work investigated the effect of different valence states of phosphorus-containing compounds on thermal decomposition and flame retardancy of polyethylene terephthalate (PET). Three polyphosphates—PBPP with +3-valence P, PBDP with +5-valence P and PBPDP with both +3/+5-valence P—were synthesized. The combustion behaviors of flame-retardant PET were studied and the structure–property relationships between the phosphorus-based structures with different valence states and flame-retardant properties were further explored. It was found that phosphorus valence states significantly affected the flame-retardant modes of action of polyphosphate in PET. For the phosphorus structures with +3-valence, more phosphorus-containing fragments were released in the gas phase, inhibiting polymer chain decomposition reactions; by contrast, those with +5-valence phosphorus retained more P in the condensed phase, promoting the formation of more P-rich char layers. It is worth noting that the polyphosphate containing both +3/+5-valence phosphorous tended to combine the advantage of phosphorus structures with two valence states and balance the flame-retardant effect in the gas phase and condensed phase. These results contribute to guiding the design of specified phosphorus-based structures of flame-retardant compounds in polymer materials. Full article

A novel flame retardant phosphorus-containing organozinc complex (Zn-PDH) was prepared using zinc and iron as the metal center and 4-aminopyridine, with low steric hindrance, as the organic ligand, then using phosphazene to modify the organometallic complex (Zn-4APD). The flame retardant properties and mechanism of Zn-PDH/Tris-(3-DOPO-1-propyl)-triazinetrione (TAD) in epoxy resin (EP) were investigated. Flame inhibition behavior was studied by the vertical combustion test (UL94), while limiting oxygen index (LOI) measurement and flame retardant properties were studied by the cone calorimeter test (CONE). The flame retardant modes of action were explored by using the thermogravimetry–Fourier transform infrared (TG-FTIR) test, X-ray photoelectron spectrometer (XPS), and Raman spectroscopy (LRS). When TAD and Zn-PDH were added to the epoxy resin in the ratio of 3:1, the system achieved a balance between the gas-phase and condense-phase actions of the flame retardant effects, and the 3%TAD/1%Zn-PDH/EP composite system achieved not only good flame inhibition but also obtained good smoke and heat suppression performance, showing a comprehensive flame retardant performance. The gas phase and Zn-PDH mostly promoted charring with a barrier and protective effect in the condensed phase. As for the mechanism, TAD released the phosphorus-containing radicals and phenoxy radicals during decomposition and mainly exerted a gas-phase quenching effect. While in the condense phase, Zn-PDH promoted the decomposition of the polymer matrix to produce more aromatic structures and rapidly formed a complete and dense carbon layer rich in P-O-C crosslinked structures at high temperatures. Meanwhile, more N entered the gas phase in the form of inert gas, which diluted the concentration of the combustible fuel and helped to inhibit the combustion reaction. Full article

Structural unsteadiness and sluggish diffusion of divalent zinc cations in cathodes during cycling severely limit further applications of MoS₂ for rechargeable aqueous zinc-ion batteries (ZIBs). To circumvent these hurdles, herein, phosphorus (P) atom embedded three-dimensional marigold-shaped 1T MoS₂ structures combined with the design of S vacancies (Sv) are synthesized via the oxygen-assisted solvent heat method. The oxygen-assisted method is utilized to aid the P-embedding into the MoS₂ crystal, which can expand the interlayer spacing of P-MoS₂ and strengthen Zn²⁺ intercalation/deintercalation. Meanwhile, the three-dimensional marigold-shaped structure with 1T phase retains the internal free space, can adapt to the volume change during charge and discharge, and improve the overall conductivity. Moreover, Sv is not only conducive to the formation of rich active sites to diffuse electrons and Zn²⁺ but also improves the storage capacity of Zn²⁺. The electrochemical results show that P-MoS₂ can reach a high specific capacity of 249 mAh g⁻¹ at 0.1 A g⁻¹. The capacity remains at 102 mAh g⁻¹ after 3260 cycles at a current of 0.5 A g⁻¹, showing excellent electrochemical performance for Zn²⁺ ion storage. This research provides a more efficient method of P atom embedded MoS₂-based electrodes and will heighten our comprehension of developing cathodes for the ZIBs. Full article

Intermittent rivers and streams are aquatic ecosystems that lose hydrological connectivity during drought periods. Anthropogenic pressures combined with climate change accelerate the spatial and temporal intermittency of these ecosystems, promoting alterations in ecology and ecosystem functions. This study aimed to assess the ecological status of Ribeira de Silveirinhos, located in the municipalities of Valongo and Gondomar (north of Portugal), using the metrics described in the Water Framework Directive. Thus, five sampling sites were selected along Ribeira de Silveirinhos. Sampling was done in three different periods, spring of 2019 and 2020, and autumn of 2019. At each site, physical and chemical water parameters were measured, and the benthic macroinvertebrates community was characterized. Physical and chemical parameters showed low pH values at upstream sites (where the dry phase occurs and is surrounded by Eucalyptus monoculture) and high concentrations of phosphorus at the downstream sites (subjected to several anthropogenic activities, iron waters, and agriculture). The macroinvertebrate community revealed low values of specific abundance and richness, especially during the dry period. Sensitive taxa (Ephemeroptera, Plecoptera, and Trichoptera) were negatively correlated with flow intermittency. Results showed that Ribeira de Silveirinhos is classified between “poor” and “moderate” in terms of ecological status. Intermittent streams are undervalued, so their protection is at risk. Thus, it is important to consider the specific ecological functioning of these ecosystems and to adjust the planning and management models in order to guarantee ecological quality and conservation processes. Full article