Search Results (13)

A series of new isatin hydrazones bearing phosphorus-containing moiety was synthesized through a simple, high-yield and easy work-up reaction of phosphine oxide (Phosenazide) or phosphinate (2-chloroethyl (4-(dimethylamino)phenyl)(2-hydrazinyl-2-oxoethyl)phosphinate, CAPAH) hydrazides with aryl-substituted isatins. The ³¹P NMR technique showed that, in most cases, out of 12 examples in solution, the ratio of the two spatial isomers varied from 1:1 to 1:3. Quantum chemical calculations confirmed the predominance of Z,syn form both in the gas phase and in solution. According to X-ray analysis data in crystals, they exist only in Z,syn form too. Most of the phosphine oxide derivatives and 5-methoxy- and 5-bromoaryl phosphinate analogs exhibit anti-aggregant activity at the level of acetylsalicylic acid but inhibit platelet activation processes more effectively. The 5-chloro type phosphinate derivative exhibits anti-aggregant properties more effectively than acetylsalicylic acid under the conditions of the tissue factor (TF)-activated thromboelastography (TEG) model, the ex vivo thrombosis model. Thus, all the obtained results can become the basis for future pharmaceutical developments to create effective anti-aggregation drugs with broad antithrombotic potential. Full article

The commercial flame-retardant 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) was almost quantitatively converted in sodium [2-(2-hydroxyphenyl)phenyl]phosphinate Na[OH-Ph-Ph-PHO₂] and disodium 2-(2-phosphinatophenyl)benzen-1-olate Na₂[O-Ph-Ph-PHO₂] under mild reaction conditions and without the use of toxic reactants. The structure of Na[OH-Ph-Ph-PHO₂] was determined by means of single-crystal X-ray diffraction. The inter- and intramolecular Na-O interactions generate a stair-like framework where the sodium cations are five-coordinated and exhibit a highly distorted coordination sphere. The two compounds are characterized by appreciable blue luminescence at the solid state upon excitation with UV light, attributed to S₁→S₀ decays on the basis of time-resolved measurements and computational calculations. The photoluminescence quantum yield is higher for Na₂[O-Ph-Ph-PHO₂], and the emission and excitation bands are shifted at longer wavelengths. The disodium salt showed affinity towards cellulose, and doped Na₂[O-Ph-Ph-PHO₂]@cellulose samples maintained emission features comparable to those of the pure compound. The nature of the interaction between cellulose and the emitting species was studied by means of periodic density functional theory calculations, that highlighted the role of the sodium cations. Full article

Butyl phenyl-H-phosphinate that is not available commercially was prepared from phenyl-H-phosphinic acid by three methods: by alkylating esterification (i), by microwave-assisted direct esterification (ii), and unexpectedly, by thermal esterification (iii). Considering the green aspects, selectivity and scalability, the thermal variation seemed to be optimal. However, there was need for prolonged heating. The butyl phenyl-H-phosphinate, along with the ethyl analogue, was utilized in the synthesis of alkyl (α-alkylamino-arylmethyl-)phenyl phosphinates in the aza-Pudovik reaction with imines obtained from primary amines and substituted benzaldehydes. The aminophosphinates were obtained as diastereomeric mixtures in 65–92% yields. The aza-Pudovik approach was more efficient than the Kabachnik–Fields condensation. Interestingly, one aminophosphinate, the butyl (α-butylamino-benzyl-)phenylphosphinate, was of significant cytotoxic activity on the PANC-1 pancreas cell line. Another derivative, ethyl (α-benzylamino-benzyl-)phenylphosphinate, revealed a selective toxic activity on U266 myeloma cells. Full article

Determining the safety of a newly developed experimental product is a crucial condition for its medical use, especially for clinical trials. In this regard, four hydrogel-type formulations were manufactured, all of which were based on carbomer (Blank-CP940) and encapsulated with caffeine (CAF-CP940), phosphorus derivatives (phenyl phosphinic (CAF-S1-CP940) and 2-carboxyethyl phenyl phosphinic acids (CAF-S2-CP940)). The main aim of this research was to provide a comprehensive outline of the biosafety profile of the above-mentioned hydrogels. The complex in vitro screening (cell viability, cytotoxicity, morphological changes in response to exposure, and changes in nuclei morphology) on two types of healthy skin cell lines (HaCaT—human keratinocytes and JB6 Cl 41-5a—murine epidermal cells) exhibited a good biosafety profile when both cell lines were treated for 24 h with 150 μg/mL of each hydrogel. A comprehensive analysis of the hydrogel’s impact on the genetic profile of HaCaT cells sustains the in vitro experiments. The biosafety profile was completed with the in vivo and in ovo assays. The outcome revealed that the developed hydrogels exerted good biocompatibility after topical application on BALB/c nude mice’s skin. It also revealed a lack of toxicity after exposure to the hen’s chicken embryo. Further investigations are needed, regarding the in vitro and in vivo therapeutic efficacy and safety for long-term use and potential clinical translatability. Full article

The SEM-EDX method was used to investigate the structure and morphology of organic–inorganic hybrids containing zirconium, boron and phosphorus compounds, synthesized by the sol–gel method. We started by using, for the first time together, zirconyl chloride hexa-hydrate (ZrOCl₂·6H₂O), phenyl phosphinic acid and triethyl borate as precursors and reagents, at different molar ratios. The obtained hybrids showed a very high thermal stability and are not soluble in water or in organic solvents. As a consequence, such hybrid solid materials are suitable for applications at high temperatures. The obtained hybrids have complex 3D structures and form organic–inorganic networks containing Zr-O-Zr, Zr-O-P and Zr-O-B bridges. Such organic–inorganic networks are also expected to form supramolecular structures and to have many potential applications in different fields of great interest such as catalysis, medicine, agriculture, energy storage, fuel cells, sensors, electrochemical devices and supramolecular chemistry. Full article

Triton-X-100, a polyethylene glycol 4-(tert-octyl)phenyl ether, has been found to be an active micellar organic catalyst for the one-pot selective synthesis of arylmethyl-H-phosphinic acids in up to 65% yields by the direct phosphinylation of arylmethyl halides with red phosphorus in the KOH/H₂O/toluene multiphase superbase system. The catalyst demonstrates a good recyclability. As a result, an expeditious method for the chemoselective synthesis of arylmethyl-H-phosphinic acids—versatile sought-after organophosphorus compounds—has been developed. The synthesis is implemented via direct alkylation/oxidation of red phosphorus with arylmethyl halides, promoted by superbase hydroxide anions using Triton-X-100 (a commercial off-the-shelf organic recyclable micellar catalyst). The reaction comprises the hydroxide anions-assisted disassembly of P_red 3D polymer molecules triggered by the separation from the potassium cation in ordinary crown-like micelles to produce polyphosphide anions in aqueous phase. Further, polyphosphide anions are alkylated with arylmethyl halides in organic phase in the presence of the catalytic Triton-X-100 reverse micelles and alkylated polyphosphide species undergo the double hydroxylation. The advantages of the strategy developed include chemoselectivity, benign and accessible starting reagents, catalyst recyclability, and facile one-pot implementation. Full article

The adsorption properties of two coordination polymers, resulting from the reaction of divalent metal (Ca²⁺ or Co²⁺) salts with (2-carboxyethyl)(phenyl)phosphinic acid, are presented in this paper. The structural and textural characterization before and after adsorption experiments is presented. The adsorbent materials were prepared using the hydrothermal procedure. The compound Ca[O₂P(CH₂CH₂COOH)(C₆H₅)]₂ (CaCEPPA) has a layered topology, with the phenyl groups oriented into the interlayer space and crystallizes in the monoclinic system. Compound Co₂[(O₂P(CH₂CH₂COO)(C₆H₅)(H₂O)]₂·2H₂O (CoCEPPA) has a 1D structure composed of zig-zag chains. The adsorption performances of CaCEPPA and CoCEPPA materials were tested in the removal of cadmium and lead from aqueous solutions. The optimum pH of ions adsorption was found to be five for both adsorbent materials. Pseudo-first and second-order kinetic models were used for fitting kinetic experimental data, and Langmuir and Freundlich isotherms were used for modeling the equilibrium experimental data. The pseudo-second-order kinetic model and Langmuir isotherm best described the adsorption of Cd and Pb ions onto the studied materials, judging from the results of the error function (correlation coefficient, sum of square error, chi-square test, and average relative error) analysis. The studied materials present a higher affinity for Cd ions compared with the adsorption capacity developed for the removal of Pb ions from aqueous solutions. CoCEPPA showed the highest adsorption performance in the removal process of metal ions from aqueous solutions compared with CaCEPPA (q_m = 54.9 mg Cd²⁺/g of CoCEPPA, q_m = 36.5 mg Cd²⁺/g of CaCEPPA). Full article

The flame retardancy of layered double hydroxides (LDHs) correlates with their structure and dispersion in a polymeric matrix. To improve the flame retardant effectiveness of Mg-Al LDH in polyethylene (PE), 2-carboxy ethyl (phenyl) phosphinic acid (CEPPA) was adopted as a flame retardant modifier to prepare CEPPA-intercalated LDH (CLDH) by the regeneration method, which was then exfoliated in PE by melt blending in the form of a masterbatch prepared from solution mixing. By compounding CLDH with intumescent flame retardant (IFR) composed of ammonium polyphosphate (APP) and pentaerythritol (PER), the thermal degradation and combustion behaviors of the flame retardant PE-based composites were investigated to reveal the flame retardant mechanism between CLDH and IFR in PE. The reactions between CLDH and IFR were revealed to make a predominant contribution to the compact and fully developed char of PE/IFR/CLDH, which enhanced the flame retardancy of the composites. Full article

With the aim to find new efficient extractants for recovery of f-block elements from processing wastes of different origin, we have compared a series of phosphoryl-containing podands, including (2-(diphenylphosphorylmethoxy)phenyl)diphenylphosphine oxide 1 and its analogues 5–7, where the ArP(O)Ph₂ group of phosphine oxide type is replaced by phosphonic fragments. Quantum-chemical modelling of the structures of phosphoryl-containing podands 1 and 5–7 has been performed, which was later confirmed by the data of X-ray diffraction. The features of extraction of nitric acid, as well as U(VI), Th(IV), Nd(III), and Ho(III) with compounds 1 and 5–7 from nitric acid media into 1,2-dichloroethane have been studied. The compositions of extracted complexes have been determined. Full article

A library of novel phosphonic acid analogues of homophenylalanine and phenylalanine, containing fluorine and bromine atoms in the phenyl ring, have been synthesized. Their inhibitory properties against two important alanine aminopeptidases, of human (hAPN, CD13) and porcine (pAPN) origin, were evaluated. Enzymatic studies and comparison with literature data indicated the higher inhibitory potential of the homophenylalanine over phenylalanine derivatives towards both enzymes. Their inhibition constants were in the submicromolar range for hAPN and the micromolar range for pAPN, with 1-amino-3-(3-fluorophenyl) propylphosphonic acid (compound 15c) being one of the best low-molecular inhibitors of both enzymes. To the best of our knowledge, P1 homophenylalanine analogues are the most active inhibitors of the APN among phosphonic and phosphinic derivatives described in the literature. Therefore, they constitute interesting building blocks for the further design of chemically more complex inhibitors. Based on molecular modeling simulations and SAR (structure-activity relationship) analysis, the optimal architecture of enzyme-inhibitor complexes for hAPN and pAPN were determined. Full article

The microwave (MW)-assisted direct esterification of phenyl-H-phosphinic acid, transesterification of the alkyl phenyl-H-phosphinates so obtained, and the similar reaction of dibenzyl phosphite (DBP) were investigated in detail, and the batch accomplishments were translated into a continuous flow operation that, after optimization of the parameters, such as temperature and flow rate, proved to be more productive. Alcoholysis of DBP is a two-step process involving an intermediate phosphite with two different alkoxy groups. The latter species are of synthetic interest, as precursors for optically active reagents. Full article

Optical resolution of several dialkyl-arylphosphine oxides was elaborated using the Ca²⁺ salt of (−)-O,O’-dibenzoyl-(2R,3R)-tartaric acid as the resolving agent. The conditions of crystallization and purification of the enantiomerically enriched phosphine oxides were optimized. Ethyl-phenyl-propylphosphine oxide and butyl-methyl-phenylphosphine oxide were prepared with an enantiomeric excess higher than 93%, whereas, three other dialkyl-arylphosphine oxides were obtained with an enantiomeric excess of 37–85%. It was also found that the sterically demanding alkyl chains hinder the formation of stable diastereomeric complexes, which consequently led to less efficient resolution procedures. Full article

The extemporaneous combustion of coal remains a major threat to safety in coal mines because such fire accidents result in casualties and significant property loss, as well as serious environmental pollution. This work proposed the fabrication of flame-retardant rigid polyurethane foam (RPUF) containing expandable graphite as char expander/sealant with melamine phosphosphate and 2-carboxyethyl (phenyl)phosphinic acid as char inducer and radical trapping agents. The as-prepared RPUF successfully inhibited coal combustion by forming thermally stable high graphitic content expandable intumescent char sealing over the coal. The RPUF achieved UL-94 V-0 rating in addition to significant reductions in peak heat release, total heat release, and CO and CO₂ yields. The external and the internal residual char structure was studied by X-ray photoelectron spectra, Raman spectroscopy, and real-time Fourier transform infrared spectra techniques, and a flame-retardant mode of action has been proposed. This work provides important insight into a facile fabrication of highly efficient and economical flame-retardant RPUF to inhibit the spontaneous combustion of coal. Full article