Search Results (213)

This study presents a cross-cultural comparison of two fortified residences—Palazzo Farnese in Italy and Dong’s Fortified Compound in China—through a triadic analytical framework encompassing architectural form, symbolic ornamentation, and public perception. By combining field observation, iconographic interpretation, and digital ethnography, the research investigates how heritage meaning is constructed, encoded, and reinterpreted across distinct sociocultural contexts. Empirical materials include architectural documentation, decorative analysis, and a curated dataset of 4947 user-generated images and 1467 textual comments collected from Chinese and international platforms between 2020 and 2024. Methods such as CLIP-based visual clustering and BERTopic-enabled sentiment modelling were applied to extract patterns of perception and symbolic emphasis. The findings reveal contrasting representational logics: Palazzo Farnese encodes dynastic authority and Renaissance cosmology through geometric order and immersive frescoes, while Dong’s Compound conveys Confucian ethics and frontier identity via nested courtyards and traditional ornamentation. Digital responses diverge accordingly: international users highlight formal aesthetics and photogenic elements; Chinese users engage with symbolic motifs, family memory, and ritual significance. This study illustrates how historically fortified residences are reinterpreted through culturally specific digital practices, offering an interdisciplinary approach that bridges architectural history, symbolic analysis, and digital heritage studies. Full article

The presence of nest boxes not only increases the reproductive success of many passerine birds in transformed forest habitats, but they also constitute important artificial microhabitats for many groups of invertebrates. One of such groups which have been often found in this microhabitat is saprophagous mites from the suborder Uropodina (Acari: Mesostigmata). The current study was conducted in October 2023 and 2024 in Bory Tucholskie National Park (BTNP) (northern Poland), where material from 137 tit (Paridae) and nuthatch (Sitta europaea) nest boxes was collected. The aim of this study was to analyse the stability of the communities of Uropodina in nest boxes in the park in two seasons and to determine whether the mite community structure within these nest boxes is similar in each year. The second aim was to analyse the abundance of Uropodina in relation to the composition of the nest box bedding material. This study revealed that the community in the scrutinised nest boxes was formed in both seasons by two species of nidicolous Uropodina species, i.e., Leiodinychus orbicularis (C.L. Koch, 1839) and Chiropturopoda nidiphila (Wiśniewski and Hirschmann, 1993), and that the species composition and the community structure were also very similar in both years. This study revealed that Ch. nidiphila dominated in the nest boxes with moss and grass, whereas L. orbicularis was most abundant in the boxes where the bedding was a mixture of mammalian hair and grass. However, no statistically significant differences in the abundance of these two mite species in both cases were revealed. Full article

In Brazil, Plasmodium infections in non-human primates (NHPs) have been associated with P. simium and P. brasilianum, which are morphologically and genetically similar to the human-infecting species P. vivax and P. malariae, respectively. Surveillance and monitoring of wild NHPs are crucial for understanding the distribution of these parasites and assessing the risk of zoonotic transmission. This study aimed to detect the presence of Plasmodium spp. genetic material in Platyrrhini primates from 47 municipalities in the states of Bahia and Minas Gerais. The animals were captured using Tomahawk-type live traps baited with fruit or immobilized with tranquilizer darts. Free-ranging individuals were chemically restrained via inhalation anesthesia using VetBag^® or intramuscular anesthesia injection. Blood samples were collected from the femoral vein. A total of 298 blood and tissue samples were collected from 10 primate species across five genera: Alouatta caraya (25), Alouatta guariba clamitans (1), Callicebus melanochir (1), Callithrix geoffroyi (28), Callithrix jacchus (4), Callithrix kuhlii (31), Callithrix penicillata (175), Callithrix spp. hybrids (15), Leontopithecus chrysomelas (16), Sapajus robustus (1), and Sapajus xanthosthernos (1). Molecular diagnosis was performed using a nested PCR targeting the 18S small subunit ribosomal RNA (18S SSU rRNA) gene, followed by sequencing. Of the 298 samples analyzed, only one (0.3%) from Bahia tested positive for Plasmodium brasilianum/P. malariae. This represents the first detection of this parasite in a free-living C. geoffroyi in Brazil. These findings highlight the importance of continued surveillance of Plasmodium infections in NHPs to identify regions at risk for zoonotic transmission. Full article

Automated fiber placement (AFP) composites exhibit complex mechanical behaviors due to manufacturing-induced mesostructural variations, including resin-rich regions and tow gaps that significantly influence both local stress distributions and global material responses. This study presents a hierarchically nested modeling framework based on the Parametric High-Fidelity Generalized Method of Cells (PHFGMC) to predict the effective elastic properties and nonlinear mechanical response of AFP composites. The PHFGMC model integrates micro- and meso-scale analyses using representative volume elements (RVEs) derived from micrographs of AFP composite laminates to capture these manufacturing-induced characteristics. Multiple RVE configurations with varied gap patterns are analyzed to quantify the influence of mesostructural features on global stress–strain response. Predictions for linear and nonlinear elastic behaviors are validated against experimental results from carbon fiber/epoxy AFP specimens, demonstrating good quantitative agreement with measured responses. A cohesive extension of the PHFGMC framework further captures damage initiation and crack propagation under transverse tensile loading, revealing failure mechanisms specifically associated with tow gaps and resin-rich areas. By systematically accounting for manufacturing-induced variability through detailed RVE modeling, the nested PHFGMC framework enables the accurate prediction of global mechanical performance and localized behavior, providing a robust computational tool for optimizing AFP composite design in aerospace and other high-performance applications. Full article

We present a brief overview of the field of charge density waves (CDW) in condensed systems with focus set to the underlying mechanisms behind the CDW ground state. Our intention in this short review is not to count all related facts from the vast volume of literature about this decades-old and still developing field, but rather to pinpoint the most important, mostly theoretical ones, presenting the development of the field. Starting from the “early days”, mainly based on weakly coupled, chain-like quasi-1D systems and Peierls instability, in which the Fermi surface nesting has been the predominant and practically paradigmatic mechanism of the CDW ground state stabilisation, we track the change in paradigms while entering the field of layered quasi-2D systems, with Fermi surface far away from the nesting regime, in which rather strong, essentially momentum-dependent interactions and particular reconstructions of the Fermi surface become essential. Examples of real quasi-1D materials, such as organic and inorganic conductors like Bechgaard salts or transition metal trichalcogenides and bronzes, in which experiment and theory have been extremely successful in providing detailed understanding, are contrasted to layered quasi-2D materials, such as ${\mathrm{high-T}}_c$ superconducting cuprates, intercalated graphite compounds or transition metal dichalcogenides, for which the theory explaining an onset of the CDWs constitutes a frontier of this fast-evolving field, strongly boosted by development of modern ab initio calculation methods. Full article

A detailed morphological characterization is presented for Oriboglyphus maorianus gen. et sp. nov., a newly discovered modern representative of the relict family Schizoglyphidae, found in a nest of the termite Stolotermes ruficeps in New Zealand. This is the second extant schizoglyphid species known from modern material, and its discovery provides rare insight into a transitional stage in the evolution of astigmatid life cycles. The phoretic stage appears to be a tritonymph—rather than the typical deutonymph—based on key morphological traits including three-segmented palps, three pairs of genital papillae, and the presence of a pharynx. These features suggest that early astigmatid mites evolved multiple ontogenetic routes to dispersal, including tritonymphal, deutonymphal, and possibly adult phoresy, before the canalization of life cycles around deutonymphal dispersal. The persistence of putatively ancestral traits in schizoglyphids, along with their apparent ecological conservatism in termite nests, indicates the role of environmental stability in preserving modes of life history that otherwise appear extinct. We also provide a key to describe Schizoglyphidae species and discuss the implications of this discovery for understanding the origins of phoresy-related metamorphosis in Astigmata. Full article

For the first time, the numerous scattered data on birds (wild and domestic) have been collected based on their medieval bone remains discovered on the modern territory of the Republic of Bulgaria. The collected information is about a total of 37 medieval settlements from the time of the First and Second Bulgarian Empires. Among the settlements studied are both the two medieval Bulgarian capitals (Pliska and Veliki Preslav), as well as other cities, smaller settlements, military fortresses, monasteries, and inhabited caves. The data refer to a total of 48 species of wild birds and 6 forms of domestic birds of 11 avian orders: Accipitriformes, Anseriformes, Ciconiiformes, Columbiformes, Falconiformes, Galliformes, Gruiformes, Otidiformes, Passeriformes, Pelecaniformes, and Strigiformes. The established composition of wild birds amounts to over one tenth (to 11.5%) of the modern avifauna in the country. Five of the established species (10.4%) have disappeared from the modern nesting avifauna of the country—the bearded vulture, the great bustard, the little bustard, the gray crane, and the saker falcon (the latter two species have reappeared as nesters in the past few years). First Bulgarian Empire (681–1018): Investigated settlements—22. Period covered—five centuries (7th to 11th c.). Found in total: at least 44 species/forms of birds, of which 39 species of wild birds and 5 forms of poultry. Second Bulgarian Empire (1185–1396): Investigated settlements—15. Period covered—3 centuries (12th to 14th c.). Found in total: at least 39 species/forms of birds, of which 33 species of wild birds and 6 forms of poultry. The groups of raptors, water, woodland, openland, synanthropic and domestic birds were analyzed separately. The conclusion was made that during the two periods of the Middle Ages, birds had an important role in the material and spiritual life of the population of the Bulgarian lands. Birds were mainly used for food (domestic birds), although some were objects of hunting. No traces of processing were found on the bones. Birds were subjects of works of applied and monumental art. Their images decorated jewelry, tableware, walls of buildings and other structures. Full article

ZSM-22 zeolites with different Si/Al ratios (38, 50, 80) were prepared via a hydrothermal synthesis method, investigated for the catalytic dehydration of 1,3-butanediol (1,3-BDO) to butadiene (BD) at 300 °C. The catalytic performance of the synthesized materials was related to their properties and compared to a commercial ZSM-22 zeolite (Si/Al = 30). ZSM-22 (50) exhibited a quick decline in conversion, a lower BD selectivity, and higher propylene selectivity compared to the other materials, which could be attributed to the presence of strong Lewis acid sites and silanol nests. The Lewis sites favor the cracking of the intermediate 3-buten-1-ol (3B1OL) into propylene, while the silanol nests interact with the free hydroxyl group of 3B1OL, potentially inhibiting further dehydration towards BD. The highest initial BD yield of 74% was observed over ZSM-22 (80), while the highest initial BD productivity of 2.7 g_BD·g⁻¹_cata·h⁻¹ was achieved over ZSM-22 (38). After 22 h time on stream (TOS), c-ZSM-22 and ZSM-22 (38) outperformed previously reported catalysts from the literature, with productivities amounting to 1.3 g_BD·g⁻¹_cata·h⁻¹ and 1.2 g_BD·g⁻¹_cata·h⁻¹, respectively, at a site time of 6.6 mol_H+·s·mol⁻¹_1,3-BDO. Full article

Microstructural, mechanical and qualitative phase identification of durable mullite-based ceramics obtained by utilization of waste clay–diatomite has been studied. Mullite-based ceramics were fabricated using waste clay–diatomite from the Baroševac open-cast coal mine, Kolubara (Serbia). The raw material consists mainly of SiO₂ (70.5 wt%) and a moderately high content of Al₂O₃ (13.8 wt%). In order to achieve the stoichiometric mullite composition (3Al₂O₃-2SiO₂), the raw material was mixed with an appropriate amount of Al(NO₃)₃·9H₂O. After preparing the precursor powder, the green compacts were sintered at 1300, 1400 and 1500 °C for 2 h. During the process, rod-shaped mullite grains were formed, measuring approximately 5 µm in length and a diameter of 500 nm (aspect ratio 10:1). The microstructure of the sample sintered at 1500 °C resulted in a well-developed, porous, nest-like morphology. According to the X-ray diffraction analysis, the sample at 1400 °C consisted of mullite, cristobalite and corundum phases, while the sample sintered at 1500 °C contained mullite (63.24 wt%) and an amorphous phase that reached 36.7 wt%. Both samples exhibited exceptional compressive strength—up to 188 MPa at 1400 °C. However, the decrease in compressive strength to 136 MPa at 1500 °C is attributed to changes in the phase composition, the disappearance of the corundum phase and alterations in the microstructure. This occurred despite an increase in bulk density to 2.36 g/cm³ (approximately 82% of theoretical density) and a complete reduction in open porosity. The residual glassy phase (36.7 wt% at 1500 °C) is probably the key factor influencing the mechanical properties at room temperature in these ceramics produced from waste clay–diatomite. However, the excellent mechanical stability of the samples sintered at 1400 and 1500 °C, achieved without binders or additives and using mined diatomaceous earth, supports further research into mullite-based insulating materials. Mullite-based materials obtained from mining waste might be successfully used in the field of energy-efficient refractory materials and thermal insulators. for high-temperature applications Full article

In this study, a novel improved ultra-wideband (UWB) antipodal Vivaldi antenna suitable for breast cancer detection via microwave imaging was designed. The antenna was made more directional by adding three pairs of nestings to the antenna fins by adding elliptical patches. The frequency operating range of the proposed antenna is UWB 3.6–13 GHz, its directivity is 11 dB, and its gain is 9.27 dB. The antenna is designed with FR4 dielectric material and dimensions of 34.6 mm × 33 mm × 1.6 mm. It was demonstrated that the bandwidth, gain, and directivity of the proposed antenna meet the requirements for UWB radar applications. The Vivaldi antenna was tested on an imaging system developed using the CST Microwave Studio (CST MWS) program. In CST MWS, a hemispherical heterogeneous breast model with a radius of 50 mm was created and a spherical tumor with a diameter of 0.9 mm was placed inside. A Gaussian pulse was sent through Vivaldi antennas and the scattered signals were collected. Then, adaptive Wiener filter and image formation algorithm delay-multiply-sum (DMAS) steps were applied to the reflected signals. Using these steps, the tumor in the breast model was scanned at high resolution. In the simulation application, the tumor in the heterogeneous phantom was detected and imaged in the correct position. A monostatic radar-based system was implemented for scanning a breast phantom in the prone position in an experimental setting. For experimental measurements, homogeneous (fat and tumor) and heterogeneous (skin, fat, glandular, and tumor) breast phantoms were produced according to the electrical properties of the tissues. The phantoms were designed as hemispherical with a diameter of 100 mm. A spherical tumor tissue with a diameter of 16 mm was placed in the phantoms produced in the experimental environment. The dynamic range of the VNA device used allowed us to image a 16 mm diameter tumor in the experimental setting. The developed microwave imaging system shows that it is suitable for the early-stage detection of breast cancer by scanning the tumor in the correct location in breast phantoms. Full article

The architectural artefacts, materials, and techniques used for constructing shelters may share some common properties derived from the architectural culture that has evolved within the human species. This article examines the material features and settlement organisations employed in the nest-building activities of early human species and the shelter forms of indigenous peoples residing in sub-Saharan Africa. It questions whether early modern human notions of architectural heritage, which lack substantiation, might have influenced nest construction, typological differentiation, material utilisation, and the transmission of practices to subsequent generations and habitats. The focus is on home-based spatial organisation and the construction of structures. We recognise the need to clarify some fundamental misunderstandings regarding the nature of cultural and archaeological taxonomies, as well as the misuse of analogical reasoning when comparing contemporary hunter–gatherer populations with certain hominin groups. The paper aims to explore whether the early ‘Homo architecture’ in Africa bears any resemblance to that of modern Africans. The central inquiry of this study is whether indigenous architectural artefacts, materials, and techniques have been passed down throughout the evolution of architectural culture. The discussion suggests that the architectural products found in the settlement remains of early Homo species may exhibit characteristics similar to the huts of the indigenous people, who live as hunter–gatherers in sub-Saharan Africa. Discussing the architectural activities of different human species proves fruitful, as early architectural understanding and principles can be adapted to contemporary placemaking scenarios, urban design approaches, and housing models. We believe that, with further evidence, this foundational idea has the potential to be developed further. Full article

The western honeybee, Apis mellifera, is used worldwide as a pollinator of crops such as strawberries; however, it is an introduced species in Japan. The mason bee, Osmia orientalis Benoist (Hymenoptera: Megachilidae), is native to Japan, where it nests in empty snail shells and has potential as a crop pollinator. We conducted three experiments to collect information on the nesting habits and potential agricultural use of this species as a pollinator of greenhouse-grown strawberries. Our first experiment investigated the bees’ nesting preferences in the field by placing the empty shells of four snail species, Euhadra amaliae, Satsuma japonica, Sinotaia quadrata histrica, and Helix lucorum, in six different environments. The nesting rate was significantly higher in medium-sized, empty E. amaliae shells. Regarding the surrounding environment, O. orientalis preferred tall and short grasslands to bare ground and forest interiors. Our second experiment investigated per-visit strawberry flower pollination efficiency. The results indicated that the efficiency of O. orientalis was equal to or greater than that of A. mellifera. In our third experiment, as a replacement for empty snail shells, which are scarce natural sources, four types of plastic artificial shells were created and placed inside a greenhouse together with E. amaliae shells. The nesting rates in three types of artificial shells were nearly identical to those in E. amaliae shells, implying that these artificial shells may be effective nesting materials. Although many questions remain before practical application, our results indicate the potential for using O. orientalis as a pollinator of greenhouse-grown strawberries. Full article

In response to the current research status and existing problems of material distribution during major emergency events, we construct an intelligent emergency logistics route model based on cellular space AGNES clustering (AGglomerative NESting clustering) and a symmetrical fruit fly optimization algorithm. We establish the cellular algorithm based on urban road nodes and node local spaces, and construct the topology algorithm to implement the cellular space in a way that includes distribution centers and delivery points. In the cellular space, we develop an improved AGNES clustering algorithm based on the cellular space model in accordance with the neighboring relationship between distribution centers and delivery points, which quantifies the spatial clustering relationship between the distribution centers and the delivery points. Based on the clustering model, we construct an emergency logistics route model by using a symmetrical fruit fly optimization algorithm. In line with the symmetrical feature of a logistics route from one destination to another, the traveling distances within one route section are the same in both directions. Thus, we construct the logistics sub-intervals and logistics intervals by using distribution centers and delivery points, and the optimal fruit fly individuals and corresponding fitness functions are searched within the two-level intervals to obtain the emergency logistics routes with the lowest costs. Experimental results show that the proposed algorithm can output the optimal logistics routes for each logistics sub-interval and the entire logistics interval. Compared with the traditional route planning methods Dijkstra’s algorithm and the A* algorithm, it can reduce the cost of route planning and achieve optimization rates of 9.89% and 13.12%, respectively. The t-test proves that the constructed algorithm is superior to the traditional route planning algorithms in saving route costs. Full article

In this research, we propose a bagworm-inspired robot that can acquire its exterior by incorporating various objects from the surrounding environment into its skin. This study was inspired by the bagworm, the larva of the giant bagworm moth, which wraps itself around straw and other materials to use as a nest. When the robot is active outdoors, it is surrounded by natural materials such as sand, fallen leaves, and pieces of wood, and can change its skin by attaching or detaching these materials as needed. In the previous study, the authors developed a camouflage robot that assimilates with the outside world by incorporating natural environmental sand. In this study, by using a water-soluble adhesive as the adhesive material, it is possible to take in a larger number of external substances than before. We also conducted experiments with natural materials, including leaves and pebbles, and confirmed that the robot could pick them up. We expect that by developing these functions, robots will not only have camouflage capabilities but also the ability to reinforce their own skin like bagworms. Full article

Sustainable strategies are required to mitigate elevated atmospheric CO₂ levels. Achieving that by adsorption, especially by using clay-based adsorbents, drew attention. These are even more promising when these adsorbents are obtained by low-cost modifications. This study evaluates the effect of ball milling on the carbon capture performance of Australian halloysite nanotube (HNT)-rich kaolin samples: one without iron impurities (Hal) and the other with iron impurities (HalFe). The iron was mainly nested within illite/mica minerals in HalFe. Samples were ball-milled for 30 and 60 min, and their CO₂ sorption was assessed at various pressures and temperatures. Crystallography, electronic microscopy, and surface area and charge characterization revealed reduced length and increased width of tubular structure following ball milling, leading to higher specific surface area without compromising crystallinity. CO₂ sorption of Hal increased 14% at 20 bar and 15 °C after 60 min milling, with a ~300% rise at near-atmospheric pressures. Conversely, milling negatively affected CO₂ sorption of HalFe, likely due to iron/illite-mica-related damage during milling. Crystallography, infrared, and thermographic analyses revealed physisorption as the primary sorption mechanism. Since direct disposal of CO₂-laden materials is against sustainability principles, these materials were tested for methylene blue removal from aqueous solutions, achieving ~83% (Hal) and ~91% (HalFe) removal efficiencies. This highlights HNTs-rich kaolin clays’ valorization potential for carbon capture and utilization (CCU). Full article