Search Results (27)

A biomimetic adaptive façade applies natural principles to building design using shading devices that dynamically respond to environmental changes, enhancing daylight, thermal comfort, and energy efficiency. While motorised systems offer precision through sensors and mechanical actuation, they consume energy and are complex. In contrast, passively actuated systems use smart materials that respond to environmental stimuli, offering simpler and more sustainable operation, but often lack responsiveness to dynamic conditions. This study explores a sequential approach by initially developing motorised shading concepts before transitioning to a passive actuation strategy. In the first phase, nine mechanically actuated shading device concepts were designed, inspired by the opening and closing behaviour of plant stomata, and evaluated on structural robustness, actuation efficiency, ease of installation, and visual integration. One concept was selected for further development. In the second phase, a biocomposite made of polylactic acid (PLA) and regenerated cellulose fibres was used for Fused Deposition Modelling (FDM) to fabricate 3D-printed modules with passive, moisture-responsive actuation. The modules underwent environmental testing, demonstrating repeatable shape changes in response to heat and moisture. Moisture application increased the range of motion, and heating led to flap closure as water evaporated. Reinforcement and layering strategies were also explored to optimise movement and minimise unwanted deformation, highlighting the material’s potential for sustainable, responsive façade systems. Full article

A mycelium is a network of hyphae that possesses the ability to self-assemble and grow into various shapes, acting as a natural binder that minimises the need for intensive chemical and energy processes, making it an alternative capable of forming structures that may eventually outperform traditional fibres such as animal leather and polyester. In this work, two mycelium mats were created, and their thickness, water absorption, coverage, and tear strength for the sewing process were determined. Fibre mats were grown in vitro or on a jute substrate. The mats were treated with salt, tannin or citric acid solutions, then air- or oven-dried. In general, the treatment that least modified the colour and appearance of the mycelium mats was citric acid, and when dried by airflow, the thickness averaged 1.4 mm. The highest tear strengths were 10.55 N/mm and 12.7 N/mm for the mycelium mats treated with citric acid without and with jute, respectively. A high percentage of water absorption was observed, reaching 267% (mycelium mats treated with tannins and dried at 65 °C) and 28% (mycelium mats treated with citric acid and air-dried). In general, all mycelium mats can be sewn, except for those treated with citric acid, which have a viscous texture and require slow sewing to prevent the mycelium from breaking. The Trametes fungus can be utilised in the production of mycelial materials, allowing for the optimisation of growth conditions to obtain mycelial mats that meet the requirements for use as an environmentally friendly alternative in the textile and related industries. Full article

Three-dimensional concrete printing (3DCP) is rapidly emerging as a transformative construction technology, enabling formwork-free fabrication, geometric flexibility, and reduced labour. However, the lack of conventional reinforcement and the strict requirements for fresh and hardened properties present significant challenges. Fibre reinforcement and supplementary cementitious materials (SCMs), such as ground granulated blast furnace slag (GGBS), offer pathways to enhance printability while mitigating environmental impact. This study investigates the combined effect of natural cellulose microfibres and silica fume on the rheological, mechanical, and sustainability performance of 3D-printable mortars. Six mixes were prepared with 50% GGBS, 45% cement, and 5% silica fume, incorporating fibre dosages from 0% to 1%. Results showed that a 0.5% fibre dosage provided the most favourable balance. At this dosage, static yield stress increased to 9.35 Pa and thixotropy reached 8623 mPa·s, enhancing structuration for shape retention. Plastic viscosity remained stable at 4–5 Pa·s, ensuring adequate extrusion performance. Higher fibre dosages (≥0.75%) caused a significant increase in rheological resistance, with static yield stress reaching 208 Pa and thixotropy 135,342 mPa·s. This resulted in excessive structuration, fibre clustering, and poor extrudability. Compressive strength was achieved at 109.10 MPa (92% of silica fume-only mix) with 0.5% fibre. In comparison, flexural strength was 13.20 MPa at 0.5% fibre content and reduced gradually to 12.29 MPa at 1% fibre due to weak fibre–matrix bonding and porosity. Sustainability analysis confirmed that using 50% GGBS and 5% silica fume reduced embodied carbon compared to a 100% cement mix. This study also demonstrated that cellulose microfibres at 0.25–0.5% are optimal for balancing fresh properties, mechanical strength, and sustainability in 3D-printed mortars. Full article

The possibility of collecting new archaeological elements useful in reconstructing the dynamics of population, production and commercial activities in the Bronze Age at the edge of the central-southern Venice Lagoon was provided between 2023 and 2024 thanks to an intervention of rescue archaeology planned during some water restoration works in the Giare–Mira area. Three small excavations revealed, approximately one meter below the current surface and covered by alluvial sediments, a rather complex palimpsest dated to the late Recent and the early Final Bronze Age. Three large circular pits containing exclusively purified grey/blue clay and very rare inclusions of vegetable fibres, and many large, fired clay vessels’ bases, walls and rims clustered in concentrated assemblages and random deposits point to potential on-site production. Two pyro-technological structures, one characterised by a sub-circular combustion chamber and a long inlet channel/praefurnium, and the second one with a sub-rectangular shape with arched niches along its southern side, complete the exceptional context here discovered. To analyse the relationship between the site and the natural sedimentary succession and to evaluate the possible extension of this site, three electrical resistivity tomography (ERT) and low-frequency electromagnetic (FDEM) measurements were collected. Several manual core drillings associated with remote sensing integrated the geophysical data in the analysis of the geomorphological evolution of this area, clearly related to different phases of fluvial activity, in a framework of continuous relative sea level rise. The typology and chronology of the archaeological structures and materials, currently undergoing further analyses, support the interpretation of the site as a late Recent/early Final Bronze Age productive site. Geophysical and geomorphological data provide information on the palaeoenvironmental setting, suggesting that the site was located on a fine-grained, stable alluvial plain at a distance of a few kilometres from the lagoon shore to the south-east and the course of the Brenta River to the north. The archaeological site was buried by fine-grained floodplain deposits attributed to the Brenta River. The good preservation of the archaeological structures buried by fluvial sediments suggests that the site was abandoned soon before sedimentation started. Full article

Microplastic pollution in soils and surface waters is a growing environmental concern, yet the mechanisms governing transport by overland flow remain unclear. This study investigated the influence of soil texture and slope gradient on the movement of microplastics with different shapes and polymer compositions under simulated rainfall and typical agricultural conditions in a semi-arid climate. Small soil flumes were subjected to controlled rainfall simulations replicating typical rain patterns, and microplastic transport was quantified using collection flasks. The results indicated that neither soil texture nor slope gradient significantly affected total microplastic transport. However, fibres exhibited greater retention in the soil compared to other shapes. Polymer composition did not play a major role in microplastic mobility, except for polystyrene pellets, which were transported more readily than polyethylene pellets. Field observations of agricultural soils with a history of sludge application confirmed a predominance of fibres in the topsoil, reinforcing the tendency of this shape to resist mobilisation. These findings suggest that microplastic transport by surface runoff is primarily governed by particle shape and buoyancy rather than soil properties or slope inclination. Future research should explore the roles of particle size, rainfall intensity, and organic matter content in microplastic mobility under natural field conditions. Full article

This study explores the mechanical behaviour of intra-laminar hybrid flax/E-glass composites, focusing on the role of micro-scale irregularities in flax fibres. By employing computational micromechanics and Monte Carlo simulations, it analyses the influence of flax fibre geometry and elastic properties on the performance of hybrid and non-hybrid composites. A Non-Circular Fibre Distribution (NCFD) algorithm is introduced to generate microstructures with randomly distributed non-circular flax and circular E-glass fibres, which are then modelled using a 3D representative volume element (RVE) model developed in Python 2.7 and implemented with Abaqus/Standard. The RVE dimensions were specified as ten times the mean characteristic length of flax fibres (580 μm) for the width and length, while the thickness was defined as one-tenth the radius of the E-glass fibre. Results show that Monte Carlo simulations accurately estimate the effect of fibre variabilities on homogenised elastic constants when compared to measured values and Halpin-Tsai predictions, and they effectively evaluate the fibre/matrix interfacial stresses and von Mises matrix stresses. While these variabilities minimally affect the homogenised properties, they increase the presence of highly stressed regions, especially at the interface and matrix of flax/epoxy composites. Additionally, intra-laminar hybridisation further increases local stress in these critical areas. These findings improve our understanding of the relationship between the natural fibre shape and mechanical performance in flax/E-glass composites, providing valuable insights for designing and optimising advanced composite materials to avoid or delay damage, such as matrix cracking and splitting, under higher applied loads. Full article

Recent pressure on scientists and industries to use renewable resources, as well as the need to produce environmentally friendly materials, has led researchers and manufacturers to use natural fibres as possible reinforcements for their composites. Although they seem to be “ideal” due to their low cost, light weight and interesting energy absorption properties, they cannot be compared to synthetic fibres. To solve this problem, hybridization techniques can be considered, since the combination of synthetic and natural fibres allows for good performances. The aim of this study was to characterize the delamination and in-plane crashworthiness behaviour of carbon, flax and hybrid composites from experimental and numerical points of view. Double Cantilever Beam and Four-Point End Notched Flexure tests were carried out to determine the interlaminar fracture modes. In-plane crashworthiness tests were then performed to investigate the delamination phenomenon and the energy absorption capacity considering two different geometries: flat and corrugated. Numerical models were created and validated on both geometries, comparing the obtained load–displacement curves with the experimental ones. Crush force efficiency and specific energy absorption were quantified to provide a proper comparison of the investigated materials. The good results achieved represent a promising starting point for the design of future and more complex structures. Full article

With respect to other fields, bone tissue engineering has significantly expanded in recent years, leading not only to relevant advances in biomedical applications but also to innovative perspectives. Polycaprolactone (PCL), produced in the beginning of the 1930s, is a biocompatible and biodegradable polymer. Due to its mechanical and physicochemical features, as well as being easily shapeable, PCL-based constructs can be produced with different shapes and degradation kinetics. Moreover, due to various development processes, PCL can be made as 3D scaffolds or fibres for bone tissue regeneration applications. This outstanding biopolymer is versatile because it can be modified by adding agents with antimicrobial properties, not only antibiotics/antifungals, but also metal ions or natural compounds. In addition, to ameliorate its osteoproliferative features, it can be blended with calcium phosphates. This review is an overview of the current state of our recent investigation into PCL modifications designed to impair microbial adhesive capability and, in parallel, to allow eukaryotic cell viability and integration, in comparison with previous reviews and excellent research papers. Our recent results demonstrated that the developed 3D constructs had a high interconnected porosity, and the addition of biphasic calcium phosphate improved human cell attachment and proliferation. The incorporation of alternative antimicrobials—for instance, silver and essential oils—at tuneable concentrations counteracted microbial growth and biofilm formation, without affecting eukaryotic cells’ viability. Notably, this challenging research area needs the multidisciplinary work of material scientists, biologists, and orthopaedic surgeons to determine the most suitable modifications on biomaterials to design favourable 3D scaffolds based on PCL for the targeted healing of damaged bone tissue. Full article

Population expansion and the development of technology have led to an increase in construction activities. In many cases, foundation grounds do not have a high enough bearing capacity and are not capable of ensuring the safe exploitation of the construction. A soil with poor mechanical characteristics must be improved using various methods, such as adding hydraulic binders (lime and cement), natural fibres, or more recently, plastic waste materials. This work aims to study the behaviour of plastic waste materials made from polyethylene terephthalate (PET) in soil improvement. Thus, the mechanical characteristics of a clay improved with shredded PET were studied. PET was added in relation to the dry mass of the clay, in percentages of 2%, 4% and 6%. The studied clay was collected from a construction site around Cluj-Napoca, Romania, from a depth of 1 ÷ 10 m. PET was provided by a local plastic waste repository. It comes from recycled water, beer and soda bottles and was cleaned using specific methods for cleaning and recycling plastic waste. PET was shredded into irregular shapes with sizes ranging from 3 mm to 12 mm and was randomly distributed in the test specimens. Compression and direct shear tests were carried out to study the compressibility and shear parameters of the improved soil (internal friction angle and cohesion). The experimental results showed an improvement in the mechanical characteristics of the clay even at a low PET addition of 2% and 4%. This method can contribute to solving two current problems of the modern world: reducing pollution by recycling plastic waste materials and using them to improve the mechanical characteristics of soil. Full article

An important source of microplastics (MPs) in the Baltic Sea waters is plastic waste, which is fragmented in the natural environment. The pilot research on the identification of microplastics in the surface waters of the Port of Gdynia is presented. In this paper, microplastics of particle sizes 0.3–5 mm in harbour seawaters were investigated. Microplastics were collected from five harbour basins using an unmanned mobile research unit, HydroDron-1. Sampling of microplastics on the surface port water was conducted over four seasons. The collected plastic particles were separated by chemical oxidation and flotation in the NaCl solution (density 1.2 g/cm³). Polymer identification was carried out by visual and microscopic observations, as well as using the Total Reflection Fourier Transform Infrared spectroscopy. Based on tows conducted in five basins of the Port of Gdynia, in total, the concentration of microplastics identified ranged from 0.082 mg/m³ to 0.524 mg/m³, depending on the investigated basin. Four groups of microplastic shapes (fragments, films, fibres and spheres) were detected in all the investigated harbour basins. Fragments and fibres were prevalent when categorised by particle shape, whereas when categorised by colour, transparent, white and black particles were dominant. The predominant type of the identified polymers was polyolefins (PE, PP, PS) and their derivatives. Full article

Land plants have an ancient and intimate relationship with microorganisms, which influences the composition of natural ecosystems and the performance of crops. Plants shape the microbiome around their roots by releasing organic nutrients into the soil. Hydroponic horticulture aims to protect crops from damaging soil-borne pathogens by replacing soil with an artificial growing medium, such as rockwool, an inert material made from molten rock spun into fibres. Microorganisms are generally considered a problem to be managed, to keep the glasshouse clean, but the hydroponic root microbiome assembles soon after planting and flourishes with the crop. Hence, microbe–plant interactions play out in an artificial environment that is quite unlike the soil in which they evolved. Plants in a near-ideal environment have little dependency on microbial partners, but our growing appreciation of the role of microbial communities is revealing opportunities to advance practices, especially in agriculture and human health. Hydroponic systems are especially well-suited to active management of the root microbiome because they allow complete control over the root zone environment; however, they receive much less attention than other host–microbiome interactions. Novel techniques for hydroponic horticulture can be identified by extending our understanding of the microbial ecology of this unique environment. Full article

Many of the carbon and natural fibres used in composite reinforcement have a non-circular cross section. Recently non-circular, or flat, cross section glass fibre products have become commercially available. This paper explores the potential effects that such non-circular fibre cross section shapes may have on the micromechanics of stress transfer at the composite fibre–matrix interface and the resulting changes in composite strength performance. Analytical modelling is used to show how the critical fibre length in composites with non-circular fibres is always less when compared to circular fibres with an equal cross-sectional area. This can result in significant changes to the strength performance of discontinuous fibre reinforced composites. Additionally, it is shown that the surface roughness found on natural and carbon fibres, many of which are also non-circular in cross section, can decrease the critical fibre length still further. These effects have important consequences for the use of single fibre micromechanical tests used for the characterisation of interfacial strength. Full article

This paper presents a modal analysis of honeycomb and re-entrant lattice structures to understand the change in natural frequencies when multi-material configuration is implemented. For this purpose, parallel nylon ligaments within re-entrant and honeycomb lattice structures are replaced with chopped and continuous carbon fibre to constitute multi-material lattice configurations. For each set, the first five natural frequencies were compared using detailed finite element models. For each configuration, three different boundary conditions were considered, which are free–free and clamping at the two sides that are parallel and perpendicular to the vertical parts of the structure. The comparison of the natural frequencies was based on mode-shape matching using modal assurance criteria to identify the correct modes of different configurations. The results showed that the natural frequency of the multi-material configurations increases from 4% to 18% depending on the configuration and material. Full article

As a light-weight natural keratin biocomposite, Bovidae horn exhibits high mechanical properties and energy absorption. Different to the widely studied horn from subfamily Bovinae and Antilocapridae, few studies have focused on the horn sheath of subfamily Caprinae. In this work, three Caprinae horn sheathes from Cashmere goat, White goat and Black sheep were selected. Charpy pendulum impact tests were performed, and the fracture characteristics were evaluated. It was demonstrated that water plays an important role in acquiring balanced dynamic mechanical properties in all Caprinae horn sheaths. The hydrated keratin provides large plastic deformation capacity and further gives rise to a gradual generation of micro-cracks. Multi-scale structure including wavy-shaped interface, scattered voids and hierarchical micro-fibre were observed. Such a structure induced complex fracture mechanisms, such as delamination, 90° crack deflection and fibre pull-out, which were probably influenced by interfacial strength. The results are expected to endow the research and thinking of Bovidae horn. Full article

Stiffness anisotropy is a natural consequence of a fibrous structure of composite materials. The effect of anisotropy can be two-fold: it is highly desirable in some cases to assure a proper material response, while it might be even harmful for the applications based on “isotropic” composite materials. To provide a controllable flexibility in material architecture by corresponding fibre alignment, the methodologies for the precise non-destructive evaluation of elastic anisotropy and the fibre orientation are required. The tasks of monitoring the anisotropy and assessing the fibre fields in composites are analyzed by using the two types of ultrasonic waves suitable for regular plate-shaped composite profiles. In the plate wave approach, the effect of “dispersion of anisotropy” has been shown to make the wave velocity anisotropy to be a function of frequency. As a result, the in-plane velocity pattern measured at a certain frequency is affected by the difference in the wave structure, which activates different elasticity against the background of intrinsic material anisotropy. Phase velocity anisotropy and its frequency dependence provide a frequency variation of the beam steering angle for plate waves (dispersion of beam steering). In strongly anisotropic composite materials, the beam steering effect is shown to provide a strong focusing of ultrasonic energy (phonon focusing). For bulk shear waves, the orthotropic composite anisotropy causes the effect of acoustic birefringence. The birefringent acoustic field provides information on stiffness anisotropy which can be caused by internal stresses, texture, molecular or/and fibre orientation. On this basis, a simple experimental technique is developed and applied for mapping of fibre orientation in composite materials. Various modes of acoustic birefringence are analyzed and applied to assessing the fibre fields in injection moulding composites and to identify the fibre lay-ups in multiply materials. The birefringence pattern is also shown to be sensitive and applicable to characterizing impact- and mechanical stress-induced damage in composites. Full article