Search Results (863)

Metal-free polymeric semiconductor graphitic carbon nitride (g-C₃N₄) was synthesized via thermal polycondensation using cyanamide with PVP as a medium, using SiO₂ nanospheres as sacrificial templates to suppress bulk agglomeration. Structural analysis using X-ray diffraction (XRD) confirmed the conservation of the g-C₃N₄ structure, while diffuse reflectance UV-Vis spectroscopy (DRS) showed that there is a slight change in optical absorption, modifying the band gap energy of g-C₃N₄ with the addition of SiO₂. Transmission electron microscopy (TEM) evidenced the formation of interconnected porous architectures, facilitating charge migration. Photocatalytic activity was evaluated under simulated solar irradiation using acetaminophen (ATP) as a model pharmaceutical pollutant. Kinetics experiments demonstrated that the sample containing 7% SiO₂ nanospheres achieved 65% degradation for 180 min. The best photocatalytic performance is attributed to the pore volume, which favors better adsorption, facilitating the degradation of acetaminophen. The participation of different reactive species during the photocatalytic degradation of ATP was determined. Experiments with scavenger agents indicate that the photogenerated holes are the predominant oxidizing reactive species. These results highlight the potential of g-C₃N₄ modified with SiO₂ nanospheres as an efficient photocatalyst for the degradation of emerging contaminants, thus advancing sustainable water treatment technologies. Full article

The natural stilbene resveratrol is a widely researched molecule, owing to its antioxidant activity and abundance of pharmacological effects. However, its application is still hindered due to its low aqueous solubility, bioavailability and photostability. Therefore, in the current study, resveratrol was loaded in two types of polymeric nanoparticles, namely mixed Pluronic F127 and P123 micelles, and bovine serum albumin nanospheres. The loaded micelles and nanospheres possessed mean diameters of 33 nm and 145 nm, zeta potentials of −4 mV and −22.6 mV, and encapsulation efficiency levels of 89.4% and 76.2%, respectively. The aqueous solubility of resveratrol increased after loading, especially in the albumin nanospheres. A sustained release was observed, more pronounced for the micelles. The photostability of the encapsulated and pure resveratrol was evaluated under daylight exposure and UV irradiation. The micelles showed superior protective effect compared to the nanospheres. The antioxidant potentials of the formulations were examined through ABTS radical scavenging activity assay and in vitro cell model of oxidative stress in L929 fibroblasts. The resveratrol-loaded albumin nanospheres showed a more enhanced antioxidant effect. Thus, the encapsulation of resveratrol in both types of nanoparticles could be considered an advantageous approach due to improvements in solubility, stability and antioxidant activity. Full article

Pt-based catalysts remain the premier hydrogen evolution reaction (HER) electrocatalysts for anion-exchange membrane water electrolyzers. Faced with insufficient abundance and high cost, developing low-Pt electrocatalysts that can accelerate the Volmer step while maintaining high durability is critically important yet challenging. Herein, we propose niobium nitrides with excellent conductivity and stability as supports for Pt to enhance the alkaline HER. A polyoxoniobate-based molecular self-assembly strategy was ingeniously designed to fabricate Nb₄N₅ nanospheres, on which ultrafine Pt nanoparticles (NPs) were successfully immobilized, forming Pt/Nb₄N₅ heterostructures (denoted as Pt/Nb₄N₅). The rich interface structures with metal–support interactions drive charge transfer from Pt to Nb₄N₅, which modulates the electronic structure of Pt and Nb sites, collectively lowering interfacial charge transfer resistance, generating abundant active sites, and improving catalyst durability. Consequently, the Pt/Nb₄N₅ catalyst achieves exceptional HER performance, including a low overpotential (22 mV@10 mA cm⁻²), a small Tafel slope (26 mV dec⁻¹), an 11.5-fold higher mass activity at 150 mV, and remarkable durability, drastically surpassing the commercial Pt/C catalyst. Notably, the Pt/Nb₄N₅-based electrolyzer requires only 1.508 V to drive 10 mA cm⁻². This work offers a viable pathway to engineer highly active and durable low-Pt electrocatalysts for energy-related applications. Full article

We demonstrate a mechanism-oriented Surface-Enhanced Raman Scattering (SERS) platform based on a hybrid structure integrating monolayer molybdenum disulfide (MoS₂) and gold nanospheres (AuNSs) on an optical microfiber (MF). The microfiber serves as a whispering-gallery-mode (WGM) microcavity. Monolayer MoS₂, grown directly on the microfiber surface via chemical vapor deposition (CVD), provides a chemically active interface for molecular adsorption and charge-transfer-related chemical enhancement. Subsequently deposited AuNSs couple with the microfiber-supported WGM, leading to the formation of hybrid photonic–plasmonic modes. This coupling results in a narrowed scattering resonance and a localized electromagnetic hotspot near the AuNS–microfiber interface. The combined contribution of electromagnetic enhancement from the microfiber–AuNS hybrid cavity and chemical enhancement from the MoS₂ layer produces discernible Raman enhancement for Rhodamine 6G (R6G) molecules under proof-of-concept measurement conditions. This work provides a useful platform for studying SERS enhancement mediated by hybrid photonic–plasmonic modes and offers guidance for the future development of optimized fiber-based SERS sensors. Full article

The growing field of nanobiotechnology could provide an alternative platform for the development of new therapeutic agents. A potential means for achieving these goals are nanoparticles of rare-earth metals, for example, nanoceria. According to the results of numerous in vitro and in vivo studies, not only oxide forms of lanthanides can demonstrate a pharmacological effect. A promising nano-object for biomedical application is cerium phosphate, which exhibits both properties characteristic of cerium dioxide and its own unique properties, due to the diversity of morphology. However, at present, a unified methodological approach has not been formulated that would make it possible to formulate principles for obtaining a compound with specified properties. This review was conducted on using the international databases PubMed, PubChem, Scopus and Google Scholar, and included original studies and reviews. The literature describes the preparation of cerium phosphate nanoparticles by the hydrothermal, chemical precipitation, microwave, and sol–gel methods. It was established that reaction temperature, pH value of the medium, use of organic solvents, ratio of reagents, and precursors have a direct influence on the size, shape, and structure of the obtained nano-object, making it possible to synthesize nanospheres, nanorods, and nanoneedles by regulating these parameters. In addition, the strategy of obtaining nano-objects with specified properties can be implemented by using excipients of predominantly polymer nature. The use of auxiliary substances is capable both of exerting a stabilizing effect and improving adherence to the nanoscale range, and of influencing pharmacological activity. The literature describes the possibility of using cerium phosphate as a redox-active, regenerative, antibacterial, sunscreen, and antitumor agent. However, the insufficient amount of data on the toxicological profile, as well as the results of in vivo studies, remains a significant limitation for the introduction of cerium phosphate into clinical practice. Thus, the purpose of the present review is to identify patterns that make it possible to formulate recommendations for the synthesis of cerium phosphate with specified properties, to assess factors affecting its suitability for use in biomedicine, and to consider its prospects and limitations. Full article

Trimethylamine (TMA), a characteristic volatile biogenic amine generated during aquatic product spoilage, has a concentration that quantitatively reflects product freshness. Therefore, developing a rapid and accurate method for TMA detection is important for food safety control. Herein, this study synthesized high-performance hollow SnO₂ nanospheres via a hydrothermal method, aiming to develop a rapid, non-destructive gas sensor for TMA detection and evaluate its feasibility for assessing aquatic product freshness. The material exhibited a high response (Ra/Rg = 10.5@100 ppm), rapid response-recovery kinetics (10 s/20 s), and good selectivity. These properties were attributed to the high specific surface area, efficient gas diffusion channels, and abundant active sites provided by the hollow structure, which enhances the sensor’s response rate. Ultraviolet–visible diffuse reflectance spectroscopy further showed that the hollow structure narrows the bandgap of SnO₂, which may facilitate electron transfer and contribute to the enhanced response to TMA. In practical applications, a MEMS sensor based on SnO₂ hollow nanospheres successfully detected TMA concentration changes from sea bass during 0–8 days of refrigerated storage, demonstrating its potential reliability for rapid freshness assessment of aquatic products and providing a technological route for quality evaluation. Full article

Superhydrophobic photothermal coatings have great potential in anti-icing and de-icing applications. However, how to construct superhydrophobic coatings with high photothermal conversion performance and an appropriate rough structure is still a challenge. In this study, we first constructed the photothermal nanosphere coating by in situ co-deposition of tannic acid (TA) and (3-aminopropyl) triethoxysilane (APTES) and then by the coordination of iron ions (Fe³⁺). A superhydrophobic photothermal coating with a micro–nano–nano hierarchical rough structure was constructed by further applying a polydimethylsiloxane (PDMS)/hydrophobic fumed silica (SiO₂) coating. The coating has excellent superhydrophobic (water contact angle (WCA) of 158°) and efficient photothermal conversion performance (75 °C). Based on this, the coated fabric shows ideal performance in passive anti-icing and active de-icing tests. At the same time, the coated fabric also has an ideal UV shielding effect, which can ensure the long-term and efficient operation of the coated fabric in the outdoor sunlight. This preparation strategy provides an innovative method for the development of superhydrophobic photothermal coating materials and has broad application prospects in the field of flexible anti-/de-icing applications. Full article

Protein molecularly imprinted polymers (MIPs), as artificial antibodies, are promising for protein separation due to their low cost, easy preparation, and high stability, but their performance is limited by poor mass transfer, imprecise imprinting, and single interaction modes. Herein, dendritic mesoporous silica nanoparticles (DMSNs) were used as the support, and a self-designed multifunctional poly(ionic liquid) macromonomer (p(VIMCD-co-VAIM-co-VSIM-co-VVIM)) served as the functional monomer to achieve directional anchoring of cytochrome C (Cyt-C). Surface-imprinted microspheres (DMSNs@MPS@PILs-MIPs) were prepared via free-radical copolymerization for Cyt-C recognition. The DMSNs possessed interconnected mesoporous channels, good dispersibility, an average particle size of ~80 nm, and a specific surface area of 267.97 m²/g. Ionic liquid monomers were synthesized via alkylation, and the macromonomer was constructed through a two-step method. Molecular dynamics simulations and spectroscopic characterization revealed the macromonomer-stabilized Cyt-C conformation, with interactions dominated by van der Waals forces. The DMSNs@MPS@PILs-MIPs featured a thin imprinted layer (~5 nm) to reduce mass-transfer resistance. Adsorption studies showed Cyt-C adsorption followed Langmuir and pseudo-second-order models, with a maximum capacity of 383.14 mg/g and an imprinting factor of 2.17. Only 12% capacity loss occurred after repeated cycles, indicating robust regeneration stability. This study provides a feasible strategy for constructing protein surface-imprinted polymers based on multifunctional synergistic interactions and conformational stabilization. Full article

A facile and scalable strategy is presented in this work for the direct fabrication of binder-free copper (Cu) oxide nanospheres on the Cu foam surface via femtosecond (fs) laser ablation for energy storage applications, primarily in supercapacitors. XRD and EDX analyses confirmed the presence of Cu oxides. At the same time, SEM images indicated that the resulting Cu oxide nanospheres range from ~70 to 700 nm in size, with hierarchical surface features such as laser-induced periodic surface structures (LIPSS), which provide additional active sites for reversible redox reactions. The prepared fs laser-ablated Cu foam samples, with Cu oxide nanospheres (Femto-Cu), can store 8 to 10 times more energy than the bare Cu foam, with ~87.7% capacitance retention after 10,000 charging–discharging cycles. Further, in-depth kinetic investigations revealed that the charge is stored through both surface-controlled capacitive behavior and a diffusion-controlled mechanism. These findings highlight the effectiveness of fs laser-induced structuring in improving the charge-storage characteristics of Cu foam and provide a promising route for developing high-performance, binder-free electrodes in a single step. Full article

Gold nanospheres (AuNPs) and gold nanoflowers (AuNFs) are widely used as platforms for DNA aptamer functionalization, while conjugation behavior and colloidal tolerance remain important factors affecting subsequent sensing-oriented optimization. In this study, 82-nt thiolated DNA aptamer constructs bearing either 3′-SH or 5′-SH terminal modification were immobilized onto citrate-stabilized AuNPs and AuNFs under matched stepwise salt-aging conditions. Apparent nanoparticle-associated DNA output was estimated by Qubit-based measurement of unbound ssDNA in the supernatant and expressed as mass-based loading output (ng). Under the tested stock-dispersion conditions, AuNP samples showed higher apparent conjugation output than AuNF samples. Specifically, the apparent conjugation yields for AuNPs were 80.65 ± 1.64% (3′-SH) and 84.76 ± 1.98% (5′-SH), whereas those for AuNFs were 66.64 ± 3.36% (3′-SH) and 73.65 ± 1.36% (5′-SH). The corresponding apparent DNA loading outputs were 2329.7 ± 47.4 ng and 2448.7 ± 57.1 ng for AuNPs, and 1925.1 ± 97.0 ng and 2127.4 ± 39.3 ng for AuNFs. DLS size increases and zeta potential shifts toward more negative values were consistent with the formation of a DNA-associated interfacial layer, while TEM images supported morphology retention after conjugation. A qualitative visual salt-challenge assessment indicated that aptamer-functionalized nanoparticles displayed improved resistance to salt-induced aggregation relative to bare particles under the tested conditions. Because the commercially supplied AuNP and AuNF dispersions were not normalized to identical particle number or accessible surface area, the reported values should be interpreted as comparative apparent outputs rather than intrinsic loading capacities. Within this scope, the present study provides a convenient preliminary materials-level evaluation of thiolated aptamer conjugation behavior and may support future glyphosate aptasensor optimization. Full article

In this work, we report the realization of curved distributed Bragg reflectors (DBRs) without the need for lithography to achieve strong lateral confinement in a GaN-based vertical cavity. By embedding SiO₂ nanospheres during deposition, curved DBRs with a funnel-shaped cross-section were fabricated. Based on the formed curved DBRs, a vertical cavity with a quality factor exceeding 2800 and a mode volume below 0.14 μm³ was successfully fabricated. The optical pumping threshold power of a vertical cavity surface-emitting laser (VCSEL) with a curved DBR was reduced to 76 nW, which is one order of magnitude lower than that of the same VCSEL with double-planar DBRs. Near-field patterns revealed that the curved-DBR VCSEL emits a circularly symmetric TEM₀₀ mode with a full width at half maximum (FWHM) of only 1.8 μm. We believe this is an effective technique for fabricating low-threshold or small-aperture VCSELs. Full article

This study reports a straightforward and controllable two-step hydrothermal synthesis of novel Ni₉S₈@NiMoO₄/NF nanospherical catalysts supported on nickel foam (NF), accompanied by a systematic evaluation of their performance in the electrochemical hydrogen evolution reaction (HER). Structural characterization revealed a well-defined Ni₉S₈–NiMoO₄ interfacial region, whose synergistic interaction, combined with the distinctive nanospherical morphology, substantially increased the electrochemically active surface area and the density of reactive sites, thereby optimizing HER kinetics. In alkaline media, the Ni₉S₈@NiMoO₄/NF catalyst demonstrated outstanding electrocatalytic performance, delivering an overpotential of only 64.2 mV at a current density of 20 mA cm⁻². The catalyst also exhibited a high double-layer capacitance of 22.2 mF cm⁻², reflecting a substantial active interfacial area. Long-term durability tests showed negligible performance degradation after 165 h of continuous operation at 10 mA cm⁻², underscoring the catalyst’s robust structural stability and durability. X-ray photoelectron spectroscopy confirmed a uniform distribution of Ni, Mo, and S across the NF framework and revealed optimized chemical states, providing material-level evidence for the enhanced performance. Collectively, this work proposes a viable strategy for designing efficient and stable HER catalysts, contributing to the advancement of green hydrogen production and clean energy technologies. Full article

In this work, we present a numerical proof-of-concept study of a device for nanoparticle sorting, targeting size ranges relevant to exosome-like dimensions (typically 40–200 nm), which remains challenging for passive sorting techniques. The system consists of three silicon waveguides embedded in a CYTOP layer and arranged in a two-step directional-coupler configuration, integrated with a microchannel that carries a water-based buffer as the carrier fluid, transporting the suspended nanoparticles. Three-dimensional Finite Element Method (3D-FEM) simulations were performed, incorporating both optical and hydrodynamic forces to track particle dynamics within the microchannel and demonstrate controlled, size-selective particle deflection. First, numerical simulations show that nanospheres with diameters ranging from 500 nm to 700 nm can be effectively separated by the transverse trapping force at a 4:1 power-splitting ratio. Then, to extend the concept toward smaller size ranges, a bifurcated microchannel is introduced, enabling fluid-assisted transport in low-optical-field regions and allowing reliable separation of particles with smaller diameters (between 200 nm and 400 nm), accompanied by an 8:1 power-splitting ratio. These results demonstrate, within a numerical framework, the feasibility of an integrated photonic–microfluidic approach for size-selective nanoparticle sorting. The proposed strategy may support future pre-processing steps in liquid biopsy workflows, particularly for enriching nanoscale components such as exosome-sized vesicles, rather than constituting a direct diagnostic tool. Full article