Search Results (40)

Designing supramolecular gelators with targeted properties is very difficult and mainly relies on structural modifications of known gelator molecules. However, very often, even minor modifications can result in the complete loss of gelation capabilities. In the present work, we have studied the influence and role of the silver nanoparticles (AgNPs) and trisodium citrate (TSC) additives on the self-assembly process of alanine derivative gelator (C₁₂Ala) and intermolecular interactions resulting in hydrogel systems of enhanced stability and sustainability. The effect of phase separation and diversity of supramolecular microstructures of gelator internal matrix on the composition of the investigated tricomponent system was studied thoroughly with thermal analysis methods (TGA/DSC), high-resolution nuclear magnetic resonance spectroscopy (HR-MAS NMR), and polarising optical microscopy (POM). The molecular mechanism of gelation and the interactions responsible for enhanced properties of nanosilver hydrogels was determined and described, indicating the synergistic role of TSC and AgNPs in the self-assembly process. Full article

The increasing use of nanocomposites has raised concerns about the potential environmental impacts, which are less understood than those observed with individual nanomaterials. The purpose of this study was to investigate the toxicity of nanosilver carbon-walled nanotube (AgNP–CWNT) composites in Hydra vulgaris. The lethal and sublethal toxicity was determined based on the characteristic morphological changes (retraction/loss of tentacles and body disintegration) for this organism. In addition, a gene expression array was optimized for gene expression analysis for oxidative stress (superoxide dismutase, catalase), regeneration and growth (serum response factor), protein synthesis, oxidized DNA repair, neural activity (dopamine decarboxylase), and the proteasome/autophagy pathways. The hydras were exposed for 96 h to increasing concentrations of single AgNPs, CWNTs, and to 10% AgNPs–90% CWNTs, and 50% AgNPs–50% CNWT composites. Transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS) analysis revealed the presence of AgNPs attached to the carbon nanotubes and AgNP aggregates. The data revealed that the AgNP–CWNT composites were more toxic than their counterparts (AgNPs and CNWT). The sublethal morphological changes (EC50) were strongly associated with oxidative stress and protein synthesis while lethal morphological changes (LC50) encompassed changes in dopamine activity, regeneration, and proteasome/autophagic pathways. In conclusion, the toxicity of AgNP–CWNT composites presents a different pattern in gene expression, and at lower threshold concentrations than those obtained for AgNPs or CWNTs alone. Full article

In this study, MoS₂ nanosheets have been prepared and treated ultrasonically with silver ammonia solutions. The MoS₂/Ag precursor was reduced using dopamine (DA) as reducing and linking agent at room temperature, and it was subjected to a hydrothermal treatment to produce MoS₂/Ag nanocomposites (denoted as MoAg). The MoAg samples were functionalized with N-oleoylethanolamine to improve dispersion in the base oil component of additives. Use of the functionalized MoAg (denoted as Fc-MoAg) as a lubricant additive for steel balls resulted in effective friction reduction and anti-wear. This work avoids ion exchange during exfoliation, and the Ag⁺ has been reduced to nano-silver particles by dopamine to enlarge the layer spaces of MoS₂. Taking the case of lubrication with base oil containing Fc-Mo_0.6Ag₁₅, the wear scar diameters and coefficients of friction of the steel balls were 0.428 and 0.098 mm, respectively, which were about three-fifths base oil. In addition, MoS₂/Cu and MoS₂/Ni nanocomposites were synthesized and the tribological properties associated with steel/steel balls assessed. The results demonstrate that all MoS₂/metal composites exhibit enhanced tribological behavior in the steel/steel pair tests. Both nanocomposite synergy and the tribofilm containing sulfide, oxide, carbide, and other compounds play important roles in achieving reduced friction and improved anti-wear. The friction and wear properties of base oil containing Fc-MoAg and commercial additives were evaluated using a four-ball wear tester with steel/steel, steel/zirconia and zirconia/zirconia pairs. The base oil containing Fc-MoAg delivered smaller coefficients of friction (COFs) and/or scarring groove depths than those observed with the use of pure base oil and base oil containing commercial additives. Full article

Chip bonding, an essential process in power semiconductor device packaging, commonly includes welding and nano-silver sintering. Currently, most of the research on chip bonding technology focuses on the thermal stress analysis of tin–lead solder and nano-silver pressure-assisted sintering, whereas research on the thermal stress analysis of the nano-silver pressureless sintering process is more limited. In this study, the pressureless sintering process of nano-silver was studied using finite element software, with nano-silver as an interconnect material. Using the control variable method, we analyzed the influences of sintering temperature, cooling rate, solder paste thickness, and solder paste area on the residual stress and warping deformation of power devices. In addition, orthogonal experiments were designed to optimize the parameters and determine the optimal combination of the process parameters. The results showed that the maximum residual stress of the module appeared on the connection surface between the power chip and the nano-silver solder paste layer. The module warping deformation was convex warping. The residual stress of the solder layer increased with the increase in sintering temperature and cooling rate. It decreased with the increase in coating thickness. With the increase in the coating area, it showed a wave change. Each parameter influenced the stress of the solder layer in this descending order: sintering temperature, cooling rate, solder paste area, and solder paste thickness. The residual stress of the nano-silver layer was 24.83 MPa under the optimal combination of the process parameters and was reduced by 29.38% compared with the original value of 35.162 MPa. Full article

Femtosecond pulsed laser irradiation was performed to investigate the feasibility and fundamental characteristics of embedding silver nanoparticles onto zirconia ceramic surfaces. By irradiating laser, nanopores were fabricated on the surface of the yttria-stabilized zirconia (YSZ) substrate, and silver nanoparticles were infiltrated and immobilized into the pores using a commercial nano-silver dispersion solution. Numerous nanopores embedded with silver nanoparticles were successfully obtained on the YSZ surface while keeping the grains’ shapes unchanged by controlling laser parameters. Optimizing laser fluence and scanning speed near the ablation threshold made it possible to remove only the excess dispersant that remained on the surface while keeping silver in the pores and without causing machining of the surface of the YSZ substrate. In addition, about 60% embedding in the nanopores was achieved. It was found that the shorter pulse width was suitable to avoid evaporating both dispersant and silver. Cross-sectional observation revealed that the silver nanoparticles were agglomerated to form clumps and were embedded without a gap at the bottom of the pores at a depth of about 600 nm. After laser irradiation, no significant laser-induced phase change was observed in the YSZ substrate, indicating that there was no in-process thermal damage to the bulk. These findings demonstrated the possibility of adding a metal nanoparticle to the zirconia surface by using only a laser process without damaging the properties of the base material during the process. New applications of zirconia, such as the generation of functional surfaces with antibacterial properties, are expected. Full article

Nanotechnology is a field of science that has been growing rapidly in recent times. The use of this science in medicine makes it possible to develop new innovative therapies and materials with therapeutic effects. The topic of controlled delivery of therapeutic substances using appropriate carriers is extremely important. Such carriers can be, among others, magnetic nanoparticles. In the present study, magnetic nanoparticles coated with nanosilver were obtained. This carrier was then placed in a hydrogel matrix. The study shows that the properties of the obtained materials indicate their high application potential as transdermal systems. In this work, hydrogel materials modified with magnetic nanoparticles with silver were subjected to a physicochemical analysis. The sorption capacity of these materials was determined, and they were subjected to infrared spectroscopy analysis and incubation tests in simulated body fluids. In addition, the surface of these materials was characterized in detail. The results indicated that all the materials exhibit excellent sorption capacities, and their surfaces are characterized with high roughness. Full article

Nanosilver has a wide range of applications in many industries, including animal production. Its beneficial effects resulting from, among others, antibacterial properties are known; however, some concerns remain related to safety of its use and possible accumulation in the environment and all its components. This study aimed to analyze the content of silver and antagonistic elements (copper, selenium, zinc) in breast and thigh muscles, abdomen skin, liver, lung and blood serum of broilers exposed to a nanosilver-based preparation added to litter. Ross 308 broilers were divided into three groups: control and two experimental (84 birds in each) differing by the amount of preparation addition. The study lasted 24 days, after which the birds were slaughtered and the mentioned samples were collected for laboratory analyses using atomic absorption spectroscopy. An application of preparation based on nanosilver caused an increase in Ag content in chickens’ liver, lung and abdomen skin. Cu content decreased in all experimental groups, except for abdomen skin, while Zn content increased in most cases compared to the control. No clear decrease of the increasing tendency was found for Se. It did not demonstrate an antagonism with respect to the content of Cu, Se and Zn in examined samples. Full article

A simple one-pot method is proposed for obtaining the colloidal nanohybrid structures of silver (gold) and zinc oxide as well as nanostructures doped with zinc ions. The copolymers of maleic acid were used for the stabilization of nanoheterostructures. To characterize the preparation, UV–Vis spectroscopy, TEM, FTIR, XPS, and XRD were used. The bactericidal properties of the nanoheterostructures were studied in relation to the fungus C. albicans and the bacteria E. coli and S. aureus, used in planktonic form. In general, the samples containing nanosilver were the most active, and the preparations containing gold nanoparticles were the least active. The minimum inhibitory concentrations (MICs) of the Ag/ZnO samples, based on all copolymers, were in the ranges of 1.4–1.7 μg/mL for C. albicans, 2.9–6.8 μg/mL for E. coli, and 23–27 μg/mL for S. aureus; the MIC values of Au/ZnO samples were 472 μg/mL for S. aureus and 945 μg/mL for C. albicans and E. coli. The additional introduction of zinc cations into heterodimers had practically no effect on the antimicrobial properties of the composites. For all prepared composites and all tested microorganisms, the fractional inhibitory concentration indexes were in the range of 0.5–2.2, which indicates a close-to-additive contribution of the bioactive components in the samples used in the bactericidal process. Full article

The demand for antimicrobial materials is gradually increasing due to the threat of infections and diseases caused by microorganisms. Silver nanoparticles (AgNPs) are widely used because of their broad-spectrum antimicrobial properties, but their synthesis methods are often environmentally harmful and AgNPs difficult to isolate, which limits their application in several fields. In this study, an aqueous solution of dialdehyde cellulose (DAC) was prepared and used as a reducing agent to synthesize AgNPs in an efficient and environmentally friendly process. The synthesized AgNPs can be easily separated from the reducing agent to expand their applications. In addition, the AgNPs were immobilized in situ on dialdehyde cellulose to form antibacterial composite films. The results showed that the prepared silver nanoparticles were mainly spherical and uniformly dispersed, with an average size of about 25 nm under optimal conditions. Moreover, the dialdehyde cellulose–nanosilver (DAC@Ag) composite films had excellent mechanical properties, positive transparency, ultraviolet-blocking properties, and effective antibacterial activity against E. coli and S. aureus. Notably, the composite films exhibited excellent oxygen and water vapor barrier properties, with WVT and ORT of 136.41 g/m²·24 h (30 °C, 75% RH) and <0.02 cm³/m²·24 h·0.1 MPa (30 °C, 75% RH), respectively, better than commercial PE films. Hence, this study not only provides an environmentally friendly method for the preparation of silver nanoparticles, but also offers a simple and novel strategy for the in situ synthesis of silver-loaded antibacterial composite films. Full article

Nano-silver is characterized by broad-spectral, strong and stable antibacterial properties, which make it a promising material in coating applications. However, the efficiency of nano-silver is generally low in the coating of films. Here, we developed a series of highly active and durable silver ions–nano-silver antimicrobial agents for powder coatings. To optimize antimicrobial activity and durability, two different nano-silver generation methods, i.e., in situ and ex situ methods combined with different carrier materials, i.e., zeolite with high ion-exchange ability and montmorillonite of layered structure were adopted and investigated. All four antibacterial additives show high activity with a reduction rate of over 99.99% and R value of over 5. The ex situ generated nano-silver antibacterial agents with both carriers exhibit higher activity in the initial antibacterial property and antibacterial durability that the coating films are able to maintain over 99% antimicrobial reduction after 20 cycles (1200 times) of soap solution wiping. They also show a lower yellowish color difference of less than three compared to the films with in situ generation method. The one with montmorillonite as carrier shows the stronger antibacterial property with an R value of 5.88 and slightly better film appearance of lower color difference, smaller reduction in gloss and increase in haze as compared to zeolite carrier due to the layered structure. Full article

Silver nanoparticles (AgNPs) have unlocked numerous novel disciplines in nanobiotechnological protocols due to their larger surface area-to-volume ratios, which are attributed to the marked reactivity of nanosilver, and due to their extremely small size, which enables AgNPs to enter cells, interact with organelles, and yield distinct biological effects. AgNPs are capable of bypassing immune cells, staying in the system for longer periods and with a higher distribution, reaching target tissues at higher concentrations, avoiding diffusion to adjacent tissues, releasing therapeutic agents or drugs for specific stimuli to achieve a longer duration at a specific rate, and yielding desired effects. The phytofabrication of AgNPs is a cost-effective, one-step, environmentally friendly, and easy method that harnesses sustainable resources and naturally available components of plant extracts (PEs). In addition, it processes various catalytic activities for the degradation of various organic pollutants. For the phytofabrication of AgNPs, plant products can be used in a multifunctional manner as a reducing agent, a stabilizing agent, and a functionalizing agent. In addition, they can be used to curtail the requirements for any additional stabilizing agents and to help the reaction stages subside. Azadirachta indica, a very common and prominent medicinal plant grown throughout the Indian subcontinent, possesses free radical scavenging and other pharmaceutical properties via the regulation of proinflammatory enzymes, such as COX and TOX. It also demonstrates anticancer activities through cell-signaling pathways, modulating tumor-suppressing genes such as p53 and pTEN, transcriptional factors, angiogenesis, and apoptosis via bcl2 and bax. In addition, it possesses antibacterial activities. Phytofabricated AgNPs have been applied in the areas of drug delivery, bioimaging, biosensing, cancer treatment, cosmetics, and cell biology. Such pharmaceutical and biological activities of phytofabricated AgNPs are attributed to more than 300 phytochemicals found in Azadirachta indica, and are especially abundant in flavonoids, polyphenols, diterpenoids, triterpenoids, limonoids, tannins, coumarin, nimbolide, azadirachtin, azadirone, azadiradione, and gedunin. Parts of Azadirachta indica, including the leaves in various forms, have been used for wound healing or as a repellent. This study was aimed at examining previously biosynthesized (from Azadirachta indica) AgNPs for anticancer, wound-healing, and antimicrobial actions (through MTT reduction assay, scratch assay, and microbroth dilution methods, respectively). Additionally, apoptosis in cancer cells and the antibiofilm capabilities of AgNPs were examined through caspase-3 expression, dentine block, and crystal violet methods. We found that biogenic silver nanoparticles are capable of inducing cytotoxicity in HCT-116 colon carcinoma cells (IC₅₀ of 744.23 µg/mL, R²: 0.94), but are ineffective against MCF-7 breast cancer cells (IC₅₀ >> 1000 µg/mL, R²: 0.86). AgNPs (IC₅₀ value) induced a significant increase in caspase-3 expression (a 1.5-fold increase) in HCT-116, as compared with control cells. FITC-MFI was 1936 in HCT-116-treated cells, as compared to being 4551 in cisplatin and 1297 in untreated cells. AgNPs (6.26 µg/mL and 62.5 µg/mL) induced the cellular migration (40.2% and 33.23%, respectively) of V79 Chinese hamster lung fibroblasts; however, the improvement in wound healing was not significant as it was for the controls. AgNPs (MIC of 10 µg/mL) were very effective against MDR Enterococcus faecalis in the planktonic mode as well as in the biofilm mode. AgNPs (10 µg/mL and 320 µg/mL) reduced the E. faecalis biofilm by >50% and >80%, respectively. Natural products, such as Syzygium aromaticum (clove) oil (MIC of 312.5 µg/mL) and eugenol (MIC of 625 µg/mL), showed significant antimicrobial effects against A. indica. Our findings indicate that A. indica-functionalized AgNPs are effective against cancer cells and can induce apoptosis in HCT-116 colon carcinoma cells; however, the anticancer properties of AgNPs can also be upgraded through active targeting (functionalized with enzymes, antibiotics, photosensitizers, or antibodies) in immunotherapy, photothermal therapy, and photodynamic therapy. Our findings also suggest that functionalized AgNPs could be pivotal in the development of a novel, non-cytotoxic, biocompatible therapeutic agent for infected chronic wounds, ulcers, and skin lesions involving MDR pathogens via their incorporation into scaffolds, composites, patches, microgels, or formulations for microneedles, dressings, bandages, gels, or other drug-delivery systems. Full article

A common method of silage production in Europe is based on the use of cylindrical bales wrapped with polyethylene films. In this study, several modifications of composition of these films were tested for their impact on the microorganisms involved in the ensiling process. Different additives, including nanosilver particles and microcellulose, were analyzed upon the first stage of the experiment. In the second stage, the usability of recycled polyethylene as a film component was assessed. The forage value after ensiling was determined during storage, based on analyses of the content of crude fiber, nitrate nitrogen, total protein, sugars, acids (lactic, acetic, butyric and propionic), pH and dry matter. Microbial forage quality was evaluated by analyses of growth of lactic acid bacteria (LAB) compared to the number of undesirable aerobic bacteria, yeasts and molds. Film properties were also characterized. No statistically significant (p < 0.05) differences were shown for the tested film formulae as compared to standard commercial films. In the second experimental stage, an elevated pH and a slightly higher content of acids were observed for the tested films than for the control sample. In addition, for standard PE film supplemented with nanosilver, a higher number of LAB was detected on the inner surface of the film and in the ensiled material. Full article

Feed additives could be added in the diets of broiler chickens to improve performance and for sustainable broiler production. The objective of this study was to evaluate the effectiveness of feeding broiler chickens with oregano bioactive lipid compounds (OBLC) and silver nanoparticles (Nano-Silver) on growth, viability, economics, carcass criteria, silver retentions, and serum biochemistry. One-day-old, unsexed Ross 308 broiler chicks (n = 320) were divided into four treatment groups. Ten replicates of eight birds each for each treatment were used. Treatments were: CONT (control diet), OBLC (CONT diet supplemented with 150 mg/kg OBLC), Nano-Silver (CONT diet supplemented with 4 mg/kg Nano-Silver), and CONT diet supplemented with OBLC + Nano-Silver at levels mentioned above were used for the study. The experiment lasted for 35 days. Supplementing OBLC and Nano-Silver individually or in combination improved (p < 0.01) body weight and feed conversion ratio when compared to CONT. The supplemented groups had a lower death rate than the CONT group, resulting in a higher net return. Supplementing broiler birds with OBLC, Nano-Silver, or their combination boosted dressing percentage and decreased abdominal fat when compared to CONT. Blood levels of aspartate aminotransferase, alanine transaminase, creatinine, and urea were lowered in broilers fed OBLC, Nano-Silver, or combination diets. Overall, the current study demonstrates that broiler chickens fed diets with OBLC and Nano-Silver, either alone or in combination, improved growth performance, liver functions, dressing percent, silver absorption and decreased abdominal fat. The best performance was observed in the combination of OBLC and Nano-Silver group compared to other treatments. Full article

Bacterial cellulose (BC) is naturally degradable, highly biocompatible, hydrophilic, and essentially non-toxic, making it potentially useful as a base for creating more sophisticated bio-based materials. BC is similar to plant-derived cellulose in terms of chemical composition and structure but has a number of important differences in microstructure that could provide some unique opportunities for use as a scaffold for other functions. In this study, bacterial cellulose was alkylated and then esterified to produce a carboxymethyl bacterial cellulose (CMBC) that was then used to produce six different composite films with potential antibacterial properties. The films were assessed for antibacterial activity against Staphylococcus aureus and Escherichia coli, pyrolysis characteristics using thermogravimetric analysis (TGA), microstructure using scanning electron microscopy (SEM), and mechanical properties. The addition of nano-silver (nano-Ag) markedly improved the antimicrobial activity of the films while also enhancing the physical and mechanical properties. The results indicate that the three-dimensional reticulated structure of the bacterial cellulose provides an excellent substrate for scaffolding other bioactive materials. Thus, the nano-BC was added into the CMBC/nano-Ag composites furthermore, and then the antibacterial and mechanical properties were improved 44% for E. coli, 59% for S. aureus, and 20% for tensile strength, respectively. Full article

The impact of fillers in the epoxy oligomer on the test culture of the marine ecosystem was investigated. The content of additive—biocides—was selected based on the complex research using STAT-GRAPHICS^® Centurion XVI. The ecotoxicity of composite surfaces was determined in model systems using methods which are standard in eco-microbiology. The microorganism was identified by studying morphological, cultural, biochemical, and antigenic properties. Studies of the structure and the microrelief of the surfaces of composite materials were conducted using scanning electron microscopy (SEM) and X-ray energy dispersive spectroscopy. Based on comprehensive research, it was established that the composition of oxytetracycline with content of q = 1.5 wt% and nanosilver with a content of q = 0.075 wt% per 100 wt% of the DER-331 oligomer and 10 parts by the mass of the TETA hardener ensures the formation of a porous nano-heterogeneous structure of the coating, which leads to the acceleration of the release of silver ions from the surface of the polymer. The rational content of the complex additives of biocides ensures adhesion to the cell wall of bacteria with subsequent penetration into it and subsequent change to the cell membrane, its death, and, therefore, the suppression of the fouling process of metal structures. Full article