Search Results (50)

The electrochemical conversion of CO₂ into high-purity Graphene NanoCarbon (GNC) materials provides a compelling path to address climate change while producing economically valuable nanomaterials. This work presents the progress and prospects of new large-scale syntheses of GNC allotropes via the C2CNT (CO₂ to Carbon Nano Technology) process. The C2CNT molten carbonate electrolysis technique enables the formation of Carbon NanoTubes (CNTs), Magnetic CNTs (MCNTs), Carbon Nano-Onions (CNOs), Carbon Nano-Scaffolds (CNSs), and Helical CNTs (HCNTs) directly from atmospheric or industrial CO₂. We discuss the morphology control enabled through variations in electrolyte composition, temperature, current density, and nucleation additives. We present results from scaled operations reaching up to 1000 tons/year CO₂ conversion and propose design approaches to reach megaton scales to support climate mitigation and GNC mass production. The products demonstrate high crystallinity, as evidenced by Raman, XRD, SEM, and TGA analyses, and offer promising applications in electronics, construction, catalysis, and medical sectors. Full article

In recent years, field-effect transistors (FETs) based on graphene have attracted significant interest due to their unique electrical properties and their potential for biosensing and molecular detection applications. This study uses FETs with a nanocrystalline graphite (NCG) channel to detect DNA nucleobases. The exceptional electronic properties of NCG, and its high surface area, enable strong π–π stacking interactions with DNA nucleobases, promoting efficient adsorption and stabilization of the biomolecules. The direct attachment of nucleobases to the NCG channel leads to substantial changes in the device’s electrical characteristics, which can be measured in real time to assess DNA binding and sequence recognition. This method enables highly sensitive, label-free DNA detection, opening up new possibilities for rapid genetic analysis and diagnostics. Understanding the interactions between DNA nucleobases and graphene-based materials is crucial for advancing genetic research and biotechnology, paving the way for more accurate and efficient diagnostic tools. Full article

The electron cyclotron resonance–chemical vapor deposition (ECR-CVD) plasma coating method was employed to bombard steel surfaces to achieve high-strength carbon-based structures. The surfaces to be coated were rotated using an Arduino-controlled rotation system at different orientations to ensure a homogeneous coating. The samples were fixed 10 mm away from the plasma gun (CH₄/N₂ plasma). The samples were characterized via XRD, EDX, Raman spectroscopy, SEM, and AFM. The coated surfaces were then subjected to tribological tests, including the wear rate, coefficient of friction, and surface hardness–roughness. Thermally reduced graphene oxide with an average nanocrystalline size of 5.19–24.58 nm and embedded carbon nanotube structures with sizes ranging from 150 to 600 nm were identified, as well as less-defective microcrystallines and nanodiamonds. The results demonstrated that carbon coating in the presence of N₂ gas led to a maximum reduction of 66% in the average wear rate, 14% improvement in the average surface hardness, 40% enhancement in the average coefficient of friction, and 48% enhancement in the average surface roughness. Consequently, a high-adhesion carbon-based coating deposited via plasma is likely to be a good candidate in the context of manufacturing engineering steels with a low friction coefficient, low wear rate, and long service life. Full article

The sodium super ionic conductor (NASICON) structured LiTi₂(PO₄)₃ (LTP) has been developed as electrode material for Li-ion batteries (LIBs) with promising electrochemical performance, owing to its outstanding structural stability and rapid lithium-ion diffusion. Nevertheless, challenges still exist, especially the rapid capacity fading caused by the low electronic conductivity of LTP-NASICON material. Recently, the hydrothermal method has emerged as an important technique for the production of diverse nano-electrode materials due to its low preparation temperature, high phase purity, and well-controlled morphology and crystallinity. Herein, we report, for the first time at low-moderate temperatures, an advanced hydrothermal synthesis of LTP-coated reduced graphene oxide (LTP@rGO) particles that includes the growth of LTP particles while simultaneously coating them with rGO material. The LTP offers a discharge specific capacity of 84 mAh/g, while the LTP@rGO delivers a discharge capacity of 147 mAh/g, both with a coulombic efficiency of 99.5% after 100 cycles at a 1C rate. Full article

Polyamide 6 (PA6) can be used as the liner material of a type IV hydrogen storage tank, but its high hydrogen permeability and poor low-temperature toughness limit its application in related fields. In this work, PA6 composites were prepared by introducing graphene with different contents and a nano two-dimensional lamellar filler via the melt blending method, and the effects of the graphene content on the crystallization properties, mechanical properties, and hydrogen barrier properties of the composites were investigated. The results showed that composites containing 2.0 wt% graphene exhibited the best overall performance, and compared with PA6, the crystallization properties, normal-temperature impact strength and low-temperature impact strength of the composites were increased by 16.0%, 130.6% and 111.7%, respectively, and the helium permeability coefficient was decreased by 33.2%. Graphene enhances the crystallinity and lamellar thickness of the composites. Additionally, its two-dimensional lamellar structure can also increase the diffusion path of gas molecules, thereby improving the barrier properties of the composites. Full article

Multiphase nanomaterials are of increasing importance in material science. Providing reliable and statistically meaningful information on their average nanostructure is essential for synthesis control and applications. In this paper, we propose a novel procedure that simplifies and makes more effective the electron powder diffraction-based Rietveld analysis of nanomaterials. Our single step in-TEM method allows to obtain the instrumental broadening function of the TEM directly from a single measurement without the need for an additional X-ray diffraction measurement. Using a multilayer graphene calibration standard and applying properly controlled acquisition conditions on a spherical aberration-corrected microscope, we achieved the instrumental broadening of ±0.01 Å in terms of interplanar spacing. The shape of the diffraction peaks is modeled as a function of the scattering angle using the Caglioti relation, and the obtained parameters for instrumental broadening can be directly applied in the Rietveld analysis of electron diffraction data of the analyzed specimen. During peak shape analysis, the instrumental broadening parameters of the TEM are controlled separately from nanostructure-related peak broadening effects, which contribute to the higher reliability of nanostructure information extracted from electron diffraction patterns. The potential of the proposed procedure is demonstrated through the Rietveld analysis of hematite nanopowder and two-component Cu-Ni nanocrystalline thin film specimens. Full article

A novel graphene-coated nanocrystalline ceramic particle, iron-based composite inoculant was developed in this study to optimize the as-cast microstructure and mechanical properties of W18Cr4V high-speed steel (HSS). The effects of the composite inoculant on the microstructure, crystal structure, and mechanical properties of HSS were analyzed using transmission electron microscopy, scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. The (00$\stackrel{\mathrm{-}}{2}$) and (020) crystal planes of the Fe₃C and Cr₇C₃ phases, respectively, were collinear at two points in the reciprocal space, indicating a coherent relationship between the Fe₃C and Cr₇C₃ phases in the tempered modified HSS. This contributed to an improved non-uniform nucleation rate and refining of the HSS grains. The mechanical properties of the modified steel exhibited a general improvement. Specifically, the modification treatment enhanced the hardness of HSS from HRC 63.2 to 66.4 and the impact toughness by 48.3%. Full article

Graphene derivatives have demonstrated high potential for various applications, including environmental ones. In this work, graphene oxide nano-sheets were obtained by utilizing a simple chemical method and were tested for water treatment applications. The pollutant adsorption ability of the produced GO was adjusted through a proper oxidation treatment of the graphene nano-sheets. The GO treatment time was systematically varied to control the oxidation level of the graphene nano-sheets and was found to considerably affect the GO’s properties and performance in removing methylene blue. The microscopic studies showed well-exfoliated, few-layer GO nano-sheets. EDS and FTIR techniques were used to probe the presence of oxygen functional groups on the GO surface. The XRD investigations revealed various crystallinity levels of the prepared GO nano-sheets depending on the treatment time. The MB degradation efficiency was maximized by optimizing the GO treatment time. The results showed that the oxidation treatment parameters of GO play a major role in adjusting its properties and can be effectively utilized to boost its performance for water purification applications. Full article

Unique electronic properties of graphene offer highly interesting ways to manipulate the functional properties of surfaces and develop novel structures which are sensitive to physical and chemical interactions. Nano-crystalline graphene is frequently preferable to crystalline monolayer in detecting devices. In this work, nano-crystalline graphene layers were synthesized directly on SiO₂/Si substrates by plasma-enhanced chemical vapour deposition (PECVD). The influence of the deposition time and temperature on the characteristics of the structures were studied. The optical properties and evaporation kinetics of pure water droplets were analysed, along with arrangement and composition of the grown layers. The nano-crystalline graphene layers grown at 500 °C were characterised by the refraction index 2.75 ± 0.35 and the normalised excess Gibbs free energy density 0.85/γ_water 10⁻⁴ m, both being similar to those of the monolayer graphene. The changes in the refraction index and the excess Gibbs free energy were related to the parameters of the Raman spectra and a correlation with the technological variables were disclosed. Full article

Nano zinc oxide-decorated graphene (G-ZnO) was blended with polyphenylene sulfide (PPS) to improve its tensile, thermal, crystalline, and barrier properties. The properties of neat PPS and PPS/G-ZnO nanocomposites were characterized and compared using various tests, including tensile tests, scanning electron microscopy, X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, evaluation of Escherichia coli inhibition, and barrier performance. The results demonstrated that G-ZnO played a crucial role in heterogeneous nucleation and reinforcement. When the concentration of G-ZnO was 0.3%, the tensile strength, elongation at break, thermostability, crystallinity, and water vapor permeability coefficients (WVPC) approached their maximum values, and the microscopic morphology changed from the original brittle fracture to a relatively tough fracture. In addition, when G-ZnO was added to PPS at a ratio of 0.3%, the tensile strength, elongation at break, and WVPC of PPS were increased by 129%, 150%, and 283%, respectively, compared to pure PPS. G-ZnO endowed the nanocomposites with antibacterial properties. The improvement in barrier performance can be attributed to three reasons: (1) the presence of G-ZnO extended the penetration path of molecules; (2) the coordination and hydrogen bonds between PPS polymer matrix and G-ZnO nanofiller narrowed the H₂O transmission path; and (3) due to its more hydrophobic surface, water molecules were less likely to enter the interior of PPS/G-ZnO nanocomposites. This study provides valuable insights for developing high-performance PPS-based nanocomposites for various applications. Full article

The wide application of graphene in the industry requires the direct growth of graphene films on silicon substrates. In this study, we found a possible technique to meet the requirement above. Multilayer graphene thin films (MLG) were grown without a catalyst on Si/SiO₂ using pulsed laser deposition (PLD). It was found that the minimum number of laser pulses required to produce fully covered (uninterrupted) samples is 500. This number of laser pulses resulted in samples that contain ~5 layers of graphene. The number of layers was not affected by the laser fluence and the sample cooling rate after the deposition. However, the increase in the laser fluence from 0.9 J/cm² to 1.5 J/cm² resulted in a 2.5-fold reduction in the MLG resistance. The present study reveals that the PLD method is suitable to produce nanocrystalline multilayer graphene with electrical conductivity of the same magnitude as commercial CVD graphene samples. Full article

Although though ionic liquids (IL) are rapidly emerging as highly efficient reagents for the depolymerization of waste plastics, their high cost and adverse impact on the environment make the overall process not only expensive but also environmentally harmful. In this manuscript, we report that graphene oxide (GO) facilitates the transformation of waste polyethylene terephthalate (PET) to Ni-MOF (metal organic framework) nanorods anchored on reduced graphene oxide (Ni–MOF@rGO) through NMP (N-Methyl-2-pyrrolidone)-based coordination in ionic liquids. Morphological studies using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed mesoporous three-dimensional structures of micrometer-long Ni-MOF nanorods anchored on reduced graphene substrates (Ni–MOF@rGO ), whereas structural studies using XRD and Raman spectra demonstrated the crystallinity of Ni-MOF nanorods. Chemical analysis of Ni–MOF@rGO carried out using X-ray photoelectron spectroscopy demonstrated that nickel moieties exist in an electroactive OH-Ni-OH state, which was further confirmed by nanoscale elemental maps recorded using energy-dispersive X-ray spectroscopy (EDS). The applicability of Ni–MOF@rGO as an electro-catalyst in a urea-enhanced water oxidation reaction (UOR) is reported. Furthermore, the ability of our newly developed NMP-based IL to grow MOF nanocubes on carbon nanotubes and MOF nano-islands on carbon fibers is also reported. Full article

The progress of advanced materials has invoked great interest in promising novel biosensing applications. Field-effect transistors (FETs) are excellent options for biosensing devices due to the variability of the utilized materials and the self-amplifying role of electrical signals. The focus on nanoelectronics and high-performance biosensors has also generated an increasing demand for easy fabrication methods, as well as for economical and revolutionary materials. One of the innovative materials used in biosensing applications is graphene, on account of its remarkable properties, such as high thermal and electrical conductivity, potent mechanical properties, and high surface area to immobilize the receptors in biosensors. Besides graphene, other competing graphene-derived materials (GDMs) have emerged in this field, with comparable properties and improved cost-efficiency and ease of fabrication. In this paper, a comparative experimental study is presented for the first time, for FETs having a channel fabricated from three different graphenic materials: single-layer graphene (SLG), graphene/graphite nanowalls (GNW), and bulk nanocrystalline graphite (bulk-NCG). The devices are investigated by scanning electron microscopy (SEM), Raman spectroscopy, and I-V measurements. An increased electrical conductance is observed for the bulk-NCG-based FET, despite its higher defect density, the channel displaying a transconductance of up to ≊$4.9\times {10}^{-3}$ A V${}^{-1}$, and a charge carrier mobility of ≊$2.86\times {10}^{-4}$ cm${}^2$ V${}^{-1}$ s${}^{-1}$, at a source-drain potential of 3 V. An improvement in sensitivity due to Au nanoparticle functionalization is also acknowledged, with an increase of the ON/OFF current ratio of over four times, from ≊$178.95$ to ≊$746.43$, for the bulk-NCG FETs. Full article

Carbon-based materials are widely applied in various devices due to their outstanding mechanical and tribological behaviors. In recent years, more attention has been paid to clarifying the nanocontact mechanisms of carbon-based materials, in order to promote nanoscale applications. The in-situ TEM method is currently the only way that can combine contact behavior and real interface. However, there is still a lack of a systematic summary of in-situ TEM studies on carbon-based materials. Therefore, this work provides an overview of in-situ TEM mechanical and tribological studies on carbon-based materials, consisting of the quantitative actuation and detection for in-situ tests, the strength of fracture and yield, the adhesion between interfaces, the friction performance, and wear features of carbon-based materials with different nanostructures, such as carbon nanotube, graphene, graphite, amorphous, sp² nanocrystalline, and ultrananocrystalline diamond. Nanostructures play a crucial role in determining mechanical and tribological behaviors. Perspectives on current challenges and future directions are presented, with the aim of promoting the advancement of in-situ TEM research. Full article

In this study, multifunctional lithium-doped bismuth ferrite [BiFe_1−xLi_xO₃]-graphene nanocomposites (x = 0.00, 0.02, 0.04, 0.06) were synthesized by a sol-gel and ultrasonication assisted chemical reduction method. X-ray diffraction and FESEM electron microscopy techniques disclosed the nanocomposite phase and nanocrystalline nature of [BiFe_1−xLi_xO₃]-graphene nanocomposites. The FESEM images and the EDX elemental mapping revealed the characteristic integration of BiFe_1−xLi_xO₃ nanoparticles (with an average size of 95 nm) onto the 2D graphene layers. The Raman spectra of the [BiFe_1−xLi_xO₃]-graphene nanocomposites evidenced the BiFe_1−xLi_xO₃ and graphene nanostructures in the synthesized nanocomposites. The photocatalytic performances of the synthesized nanocomposites were assessed for ciprofloxacin (CIP) photooxidation under UV-visible light illumination. The photocatalytic efficiencies of [BiFe_1−xLi_xO₃]-graphene nanocomposites were measured to be 42%, 47%, 43%, and 10%, for x = 0.00, 0.02, 0.04, 0.06, respectively, within 120 min illumination, whereas the pure BiFeO₃ nanoparticles were 21.0%. BiFe_1−xLi_xO₃ nanoparticles blended with graphene were explored as cathode material and tested in a microbial fuel cell (MFC). The linear sweep voltammetry (LSV) analysis showed that the high surface area of BiFeO₃ was attributed to efficient oxygen reduction reaction (ORR) activity. The increasing loading rates of (0.5–2.5 mg/cm²) [BiFe_1−xLi_xO₃]-graphene composite on the cathode surface showed increasing power output, with 2.5 and 2 mg/cm² achieving the maximum volumetric power density of 8.2 W/m³ and 8.1 W/m³, respectively. The electrochemical impedance spectroscopy (EIS) analysis showed that among the different loading rates used in this study, BiFeO₃, with a loading rate of 2.5 mg/cm², showed the lowest charge transfer resistance (R_ct). The study results showed the potential of [BiFe_1−xLi_xO₃]-graphene composite as a cost-effective alternative for field-scale MFC applications. Full article