Search Results (32)

Hybrid beamforming plays a critical role in evaluating wireless communication technology, particularly for millimeter-wave (mmWave) multiple-input multiple-out (MIMO) communication. Several hybrid beamforming systems are investigated for millimeter-wave multiple-input multiple-output (MIMO) communication. The deployment of huge grant-free transmission in the millimeter-wave (mmWave) band is required due to the growing demands for spectrum resources in upcoming enormous machine-type communication applications. Ultra-high data speed, reduced latency, and improved connection are all promised by the development of 5G mmWave networks. Yet, due to severe route loss and directional communication requirements, there are substantial obstacles to transmission reliability and energy efficiency. To address this limitation in this research we present an intelligent transmission control scheme tailored to 5G mmWave networks. Transport control protocol (TCP) performance over mmWave links can be enhanced for network protocols by utilizing the mmWave scalable (mmS)-TCP. To ensure that users have the stronger average power, we suggest a novel method called row compression two-stage learning-based accurate multi-path processing network with received signal strength indicator-based association strategy (RCTS-AMP-RSSI-AS) for an estimate of both the direct and indirect channels. To change user scenarios and maintain effective communication constantly, we utilize the innovative method known as multi-user scenario-based MATD3 (Mu-MATD3). To improve performance, we introduce the novel method of “digital and analog beam training with long-short term memory (DAH-BT-LSTM)”. Finally, as optimizing network performance requires bottleneck-aware congestion reduction, the low-latency congestion control schemes (LLCCS) are proposed. The overall proposed method improves the performance of 5G mmWave networks. Full article

The growing demand for large-scale data distribution and sharing presents significant challenges to content transmission within the current TCP/IP network architecture. To address these challenges, Information-Centric Networking (ICN) has emerged as a promising alternative, offering inherent support for multipath forwarding and in-network caching to improve data transmission performance. However, most existing ICN caching strategies primarily focus on utilizing resources along the default transmission path and its neighboring nodes, without fully exploiting the additional resources provided by multipath forwarding. To address this gap, we propose an efficient multipath-based caching strategy that optimizes cache placement by decomposing the problem into two steps, multipath selection and cache node selection along the paths. First, multipath selection considers both transmission and caching resources across multiple paths, prioritizing the caching of popular content while efficiently transmitting less popular content. Next, along the selected paths, cache node selection evaluates cache load based on cache utilization and available capacity, prioritizing nodes with the lowest cache load. Extensive simulations across diverse topologies demonstrate that the proposed strategy reduces data transmission latency by at least 12.22%, improves cache hit rate by at least 16.44%, and enhances cache node load balancing by at least 18.77%, compared to the neighborhood collaborative caching strategies. Full article

Fifth-generation mobile networks (5G) are designed to support enhanced Mobile Broadband, Ultra-Reliable Low-Latency Communications, and massive Machine-Type Communications. To meet these diverse needs, 5G uses technologies like network softwarization, network slicing, and artificial intelligence. Multi-connectivity is crucial for boosting mobile device performance by using different Wireless Access Technologies (WATs) simultaneously, enhancing throughput, reducing latency, and improving reliability. This paper presents a multi-connectivity testbed from the 5G-CLARITY project for performance evaluation. MultiPath TCP (MPTCP) was employed to enable mobile devices to send data through various WATs simultaneously. A new MPTCP scheduler was developed, allowing operators to better control traffic distribution across different technologies and maximize aggregated throughput. Our proposal mitigates the impact of limitations on one path affecting others, avoiding the Head-of-Line blocking problem. Performance was tested with real equipment using 5GNR, Wi-Fi, and LiFi —complementary WATs in the 5G-CLARITY project—in both static and dynamic scenarios. The results demonstrate that the proposed scheduler can manage the traffic distribution across different WATs and achieve the combined capacities of these technologies, approximately 1.4 Gbps in our tests, outperforming the other MPTCP schedulers. Recovery times after interruptions, such as coverage loss in one technology, were also measured, with values ranging from 400 to 500 ms. Full article

We introduce a novel multipath data transport approach at the transport layer referred to as ‘Deep Deterministic Policy Gradient for Multipath Performance-oriented Congestion Control’ (DDPG-MPCC), which leverages deep reinforcement learning to enhance congestion management in multipath networks. Our method combines DDPG with online convex optimization to optimize fairness and performance in simultaneously challenging multipath internet congestion control scenarios. Through experiments by developing kernel implementation, we show how DDPG-MPCC performs compared to the state-of-the-art solutions. Full article

This paper proposes an energy-efficient scheduling scheme for multi-path TCP (MPTCP) in heterogeneous wireless networks, aiming to minimize energy consumption while ensuring low latency and high throughput. Each MPTCP sub-flow is controlled by an agent that cooperates with other agents using the Multi-Agent Deep Deterministic Policy Gradient (MADDPG) algorithm. This approach enables the agents to learn decentralized policies through centralized training and decentralized execution. The scheduling problem is modeled as a multi-agent decision-making task. The proposed energy-efficient scheduling scheme, referred to as EE-MADDPG, demonstrates significant energy savings while maintaining lower latency and higher throughput compared to other state-of-the-art scheduling techniques. By adopting a multi-agent deep reinforcement learning approach, the agents can learn efficient scheduling policies that optimize various performance metrics in heterogeneous wireless networks. Full article

In today’s digital era, the demand for uninterrupted and efficient data streaming is paramount across various sectors, from entertainment to industrial automation. While the traditional single-path solutions often fell short in ensuring rapid and consistent data transfers, Multipath TCP (MPTCP) emerges as a promising alternative, enabling simultaneous data transfer across multiple network paths. The efficacy of MPTCP, however, hinges on the choice of appropriate congestion control (CC) algorithms. Addressing the present knowledge gap, this research provides a thorough evaluation of key MPTCP CC algorithms in the context of streaming applications in open Internet environments. Our findings reveal that BALIA stands out as the most suitable choice for MPTCP streaming, adeptly balancing waiting time, throughput, and Head-of-Line blocking reduction. Conversely, the wVegas algorithm, with its delay-centric approach, proves less adequate for multipath streaming. This study underscores the imperative to fine-tune MPTCP for streaming applications, at the same time offering insights for future development areas and innovations. Full article

Multiconnectivity allows user equipment/devices to connect to multiple radio access technologies simultaneously, including 5G, 4G (LTE), and WiFi. It is a necessity in meeting the increasing demand for mobile network services for the 5G and beyond wireless networks, while ensuring that mobile operators can still reap the benefits of their present investments. Multipath TCP (MPTCP) has been introduced to allow uninterrupted reliable data transmission over multiconnectivity links. However, energy consumption is a significant issue for multihomed wireless devices since most of them are battery-powered. This paper employs software-defined networking (SDN) and deep neural networks (DNNs) to manage the energy consumption of devices with multiconnectivity running MPTCP. The proposed method involves two lightweight algorithms implemented on an SDN controller, using a real hardware testbed of dual-homed wireless nodes connected to WiFi and cellular networks. The first algorithm determines whether a node should connect to a specific network or both networks. The second algorithm improves the selection made by the first by using a DNN trained on different scenarios, such as various network sizes and MPTCP congestion control algorithms. The results of our extensive experimentation show that this approach effectively reduces energy consumption while providing better network throughput performance compared to using single-path TCP or MPTCP Cubic or BALIA for all nodes. Full article

Due to the overload of IP semantics, the traditional TCP/IP network has a number of problems in scalability, mobility, and security. In this context, information-centric networking (ICN) is proposed to solve these problems. To reduce the cost of deployment and smoothly evolve, the ICN architecture needs to be compatible with existing IP infrastructure. However, the rigid underlying IP routing regulation limits the data transmission efficiency of ICN. In this paper, we propose a novel multipath transmission scheme by utilizing the characteristics and functions of ICN to enhance data transmission. The process of multipath transmission can be regarded as a service, and a multipath transmission service ID (MPSID) is assigned. By using the ICN routers bound to the MPSID as relay nodes, multiple parallel paths between the data source and the receiver are constructed. Moreover, we design a path management mechanism, including path selection and path switching. It can determine the initial path based on historical transmission information and switch to other optimal paths according to the congestion degree during transmission. The experimental results show that our proposed method can improve the average throughput and reduce the average flow completion time and the average chunk completion time. Full article

We consider multipath TCP (MPTCP) flows over the data networking dynamics of IEEE 802.11ay for drone surveillance of areas using high-definition video streaming. Mobility-induced handoffs are critical in IEEE 802.11ay (because of the smaller coverage of mmWaves), which adversely affects the performance of such data streaming flows. As a result of the enhanced 802.11ay network events and features (triggered by beamforming, channel bonding, MIMO, mobility-induced handoffs, channel sharing, retransmissions, etc.), the time taken for packets to travel end-to-end in 802.11ay are inherently time-varying. Several fundamental assumptions inherent in stochastic TCP models, including Poisson arrivals of packets, Gaussian process, and parameter certainty, are challenged by the improved data traffic dynamics over IEEE 802.11ay networks. The MPTCP model’s state estimation differs largely from the actual network values. We develop a new data-driven stochastic framework to address current deficiencies of MPTCP models and design a foundational architecture for intelligent multipath scheduling (at the transport layer) considering lower layer (hybrid) beamforming. At the heart of our cross-layer architecture is an intelligent learning agent for actuating and interfacing, which learns from experience optimal packet cloning, scheduling, aggregation, and beamforming using successful features of multi-armed bandits and federated learning. We demonstrate that the proposed framework can estimate and optimize jointly (explore–exploit) and is more practicable for designing the next generation of low-delay and robust MPTCP models. Full article

The scheduler is a crucial component of the multipath transmission control protocol (MPTCP) that dictates the path that a data packet takes. Schedulers are in charge of delivering data packets in the right order to prevent delays caused by head-of-line blocking. The modern Internet is a complicated network whose characteristics change in real-time. MPTCP schedulers are supposed to understand the real-time properties of the underlying network, such as latency, path loss, and capacity, in order to make appropriate scheduling decisions. However, the present scheduler does not take into account all of these characteristics together, resulting in lower performance. We present the low latency and high data rate (LLHD) scheduler, which successfully makes scheduling decisions based on real-time information on latency, path loss, and capacity, and achieves around 25% higher throughput and 45% lower data transmission delay than Linux’s default MPTCP scheduler. Full article

Many devices contain more than one network interface. There is scope for multi-path transfer to utilise these network interfaces simultaneously. Multi-path TCP (MPTCP) is designed to provide improved resilience and resource utilisation through multi-path transfer. One of the key goals of MPTCP is to preserve fair resource sharing with regular TCP at network bottlenecks. Although the coupled congestion control algorithms can achieve this goal by coupling subflow congestion windows, the algorithms always assume that the subflow paths will share a bottleneck. As a consequence, MPTCP is unable to maximise throughput over all available paths at a non-shared bottleneck. We present a survey about MPTCP and its coupled congestion control algorithms. We then show that MPTCP coupled congestion control algorithms perform poorly when paths are disjoint and/or do not have similar delay and/or bandwidth characteristics. Full article

The 5G cellular network comes with a promise to provide a very high data rate at low latency, which is becoming critical for advancing technologies. Mobile operators are currently deploying the 5G cellular network worldwide. However, because of limited coverage and high susceptibility of the 5G network to obstacles, handoffs from 5G to 4G and vice versa frequently occur, especially when the user equipment (UE) is moving. These handoffs often cause significant delays in data transmission due to packet losses and retransmissions. A promising solution can be to use both 4G and 5G networks simultaneously, which can solve this problem and yield a better throughput. Multipath transmission control protocol (TCP) is an effective solution for this problem, but it requires significant performance evaluation before practical deployment. In this study, we implement an MPTCP testbed based on NS3-DCE that enables to test the performance of MPTCP schedulers and congestion control algorithms (CCAs) in both 3GPP and non-3GPP networks. Through extensive simulation experiments in a scenario where a UE simultaneously utilizes both 4G and 5G networks, we found that blocking estimation (BLEST) scheduler implemented with balanced linked adaptation (BALIA) CCA can produce the highest throughput and lowest delay. Finally, we showed how received signal to interference and noise ratio (SINR), congestion window, throughput, and packet losses are interconnected. Full article

The Internet-of-Things (IoT) based monitoring system has significantly promoted the intelligence and automation of power grids. The inspection robots and wireless sensors used in the monitoring system usually have multiple network interfaces to achieve high throughput and reliability transmission. The concurrent usage of these available interfaces with Multipath TCP (MPTCP) can enhance the quality of service of the communications. However, traditional MPTCP scheduling algorithms may bring about data disorder and even buffer blocking, which severely affects the transmission performance of MPTCP. And the common MPTCP improvement mechanisms for IoT lack sufficient attention to energy consumption, which is important for the battery-limited wireless sensors. With the aim to promote conservative energy without loss of throughput, this paper develops an integrated multipath scheduler for energy consumption optimization named energy-efficient MPTCP (EE-MPTCP). EE-MPTCP first constructs a target optimization function which considers both network throughput and energy consumption. Then, based on the proposed MPTCP transmission model and existing energy efficiency model, the network throughput and energy consumption of each path can be estimated. Finally, a heuristic scheduling algorithm is proposed to find a suitable set of paths for each application. As confirmed by experiments based on Linux testbed as well as the NS3 simulation platform, the proposed scheduler can shorten the average completion time and reduce the energy consumption by up to 79.9% and 79.2%, respectively. Full article

There is no well-defined utility function for existing multipath TCP algorithms. Therefore, network utility maximization (NUM) for MPTCP is a complex undertaking. To resolve this, we develop a novel condition under which Kelly’s NUM mechanism may be used to explicitly compute the equilibrium. We accomplish this by defining a new utility function for MPTCP by employing Tullock’s rent-seeking paradigm from game theory. We investigate the convergence of no-regret learning in the underlying network games with continuous actions. Based on our understanding of the design space, we propose an original MPTCP algorithm that generalizes existing algorithms and strikes a good balance among the important properties. We implemented this algorithm in the Linux kernel, and we evaluated its performance experimentally. Full article

With the recent advances in computing devices such as smartphones and laptops, most devices are equipped with multiple network interfaces such as cellular, Wi-Fi, and Ethernet. Multipath TCP (MPTCP) has been the de facto standard for utilizing multipaths, and Multipath QUIC (MPQUIC), which is an extension of the Quick UDP Internet Connections (QUIC) protocol, has become a promising replacement due to its various advantages. The multipath scheduler, which determines the path to which each packet should be transmitted, is a key function that affects the multipath transport performance. For example, the default minRTT scheduler typically achieves good throughput, while the redundant scheduler gains low latency. While the legacy schedulers may generally give a desirable performance in some environments, however, each application renders different requirements. For example, Web applications target low latency, while video streaming applications require low jitter and high video quality. In this paper, we propose a novel MPQUIC scheduler based on deep reinforcement learning using the Deep Q-Network (DQN) that enhances the quality of multimedia streaming. Our proposal first takes into account both delay and throughput as a reward for reinforcement learning to achieve a low video chunk download time. Second, we propose a chunk manager that informs the scheduler of the video chunk information, and we also tune the learning parameters to explore new random actions adequately. Finally, we implement our new scheduler on the Linux kernel and give results using the Mininet experiments. The evaluation results show that our proposal outperforms legacy schedulers by at least 20%. Full article