Search Results (21)

Passive buildings are increasing in popularity in Canada. This paper examines two passive buildings initially constructed in the past decade: the Peterborough passive multi-unit residential building (MURB) and the Wolfe Island single-family dwelling. A post-occupancy evaluation was performed on the buildings. The buildings were modelled in HOT2000 and the Passive House Planning Package (PHPP) to ensure the validity of the results. The energy bills were collected from the building owners to acquire the real-time consumption of the buildings. The models have shown a good agreement with the collected data. Furthermore, data loggers were installed in both buildings for indoor temperature monitoring to ensure that they adhere to the passive house explicit criteria. Internal gains, shading, and orientation were analyzed to assess their effect on heating and cooling loads. Peterborough MURB has shown more energy-saving potential compared to the Wolfe Island passive house. Heating load reduction has been compared, more than five times, to the cooling load reduction potential. The reduction in GHG emissions can be up to 39% when passive house parameters are applied to the Wolfe Island house. This paper has shown the potential of the passive house in relation to sustainable buildings in Northern climates. Full article

As the socio-economic landscape expands and tourism flourishes, the traditional earthen dwellings of Tuyugou Village, Turpan, Xinjiang, face significant challenges, including low energy efficiency and suboptimal living comfort, necessitating data-driven and scientifically robust renovation strategies. Existing renovation methods, however, often lack empirical support and rely heavily on the subjective judgments of architects, thus hindering the effective preservation and transmission of cultural heritage. This research addresses the renovation of these traditional dwellings by employing the AHP method to systematically evaluate user requirements, with input from diverse stakeholders, including homeowners, tourists, experts, and government authorities. The study then applies the QFD method to construct the House of Quality, translating user needs into specific design attributes; this is followed by a comprehensive quantitative analysis for optimization. A novel multi-objective optimization model (MOP) is introduced, with materials as the central focus, addressing key aspects of engineering, culture, and energy conservation. The NSGA-II algorithm is utilized to generate optimal Pareto solutions, which are then further refined using the entropy-weighted VIKOR method. Among the ten pre-selected renovation solutions, the sixth design plan was identified as the optimal choice, excelling in cost control, cultural integration, and energy performance. Specifically, it achieved a unit construction cost of RMB 340.566/m², a cultural adaptability score of 1.5364, and an energy cost of RMB 352.793/kWh, thereby demonstrating an effective balance between traditional architectural elements and modern requirements. The objective decision making enabled by the VIKOR method successfully balances cultural preservation with contemporary needs, enhancing both living standards and tourism appeal. This study offers innovative and empirically grounded renovation strategies for traditional dwellings in arid and semi-arid climates, providing a framework that effectively balances cultural preservation and modernization. Full article

Due to the rising prices of houses and rent, apartment buildings have become the preferred and most utilized dwellings in Australia. However, there have been cases of serious defects in multi-unit dwellings (apartment buildings), posing various risks to and reducing potential residents’ confidence in such dwellings. To address this issue, the current study investigated the types, causes, risk severity, and impacts of defects on residents in mid- to high-rise multi-unit dwellings in Australia. The study utilized a mixed approach involving quantitative (online questionnaire) and qualitative (interviews) methods. Data were collected from 104 apartment building residents in Brisbane, Queensland, Australia, with support from interviews with six experienced local construction professionals. The results revealed that there are 11 key defects present in local apartment buildings, with waterproofing, internal finishes, and structural issues being the most frequently reported. Residents typically report these defects to building owners, agents, and managers, who take more than three months, on average, to rectify them, adding to the residents’ psychological issues and their inability to use the property as intended. The reasons for the delayed rectification of defects include non-responsive owners, agents, and building management teams, scheduling conflicts, litigation, and high costs. The interviewed professionals acknowledged the presence of defects and identified the reliance on Design and Construct (D&C) and fixed price contracts, lack of public awareness, and absence of a system to capture builders’ reputation, as well as a manipulative quality check system, as key reasons for defects. This study addresses the defect concerns in multi-unit Australian dwellings (apartments) and expects to spark a much-needed debate around reforms in the construction sector to address these issues and minimize their risks and impact on residents. Full article

The UAE’s federal and local governments initiated their public housing programs for Emirati citizens on low incomes to provide them with adequate basic services and to improve their living conditions. Until 2005, most of the public housing units were developed as single-family dwellings on ample plots, but, afterwards, the areas of the housing plots significantly decreased due to the growing demand for public housing associated with the increasing population and limited land availability. Recently, it has become increasingly difficult to provide single-family housing for all Emirati citizens who need public dwellings. To address this problem, the UAE has shifted towards the provision of multi-family housing. To this end, two pioneering vertical public housing projects have been developed: Diba Al Hosn in Sharjah and Al Ghurfa in Al Fujairah. While the designs of the two projects attempted to consider the requirements of the lifestyle of Emirati families, the degree of attaining the wider social sustainability considerations in the design of these projects has not been explored yet. To bridge this gap, this research first examined the essential social sustainability aspects that should be taken into consideration when designing multi-family housing in general. Then, the research compared the two multi-family local designs with some global case studies regarding the degree of achieving social sustainability aspects. The research ended with revealing the social sustainability-related shortcomings of the designs of recent multi-family public housing in the UAE and, hence, suggested an integrated set of social sustainability principles and indicators that, if appropriately applied, could help appropriately attain social sustainability aspects for Emirati’s vertical public housing. Full article

Intracortical neural probes are both a powerful tool in basic neuroscience studies of brain function and a critical component of brain computer interfaces (BCIs) designed to restore function to paralyzed patients. Intracortical neural probes can be used both to detect neural activity at single unit resolution and to stimulate small populations of neurons with high resolution. Unfortunately, intracortical neural probes tend to fail at chronic timepoints in large part due to the neuroinflammatory response that follows implantation and persistent dwelling in the cortex. Many promising approaches are under development to circumvent the inflammatory response, including the development of less inflammatory materials/device designs and the delivery of antioxidant or anti-inflammatory therapies. Here, we report on our recent efforts to integrate the neuroprotective effects of both a dynamically softening polymer substrate designed to minimize tissue strain and localized drug delivery at the intracortical neural probe/tissue interface through the incorporation of microfluidic channels within the probe. The fabrication process and device design were both optimized with respect to the resulting device mechanical properties, stability, and microfluidic functionality. The optimized devices were successfully able to deliver an antioxidant solution throughout a six-week in vivo rat study. Histological data indicated that a multi-outlet design was most effective at reducing markers of inflammation. The ability to reduce inflammation through a combined approach of drug delivery and soft materials as a platform technology allows future studies to explore additional therapeutics to further enhance intracortical neural probes performance and longevity for clinical applications. Full article

In Korea, energy consumption within apartments in metropolitan areas accounted for more than 33% of the total energy consumption by buildings in 2020. In this study, in order to increase the energy efficiency of MDU (multi-dwelling unit) complexes in metropolitan areas, improvement factors and economic effects were analyzed using ECO2, a building energy efficiency evaluation program. Optimal improvement measures are proposed, to reduce the economic burden on users by applying energy saving technologies. This study was conducted in four stages; in the first stage, using ECO2 software, five types of apartments were selected as standards among 46 complexes. Standard MDUs were selected if more than two factors were satisfied from among the following: (1) household type, (2) average exterior wall insulation and window performance, (3) average energy consumption and demand per unit area per year, (4) average applied facility system, and (5) average monthly energy demand per unit area. In the second stage, improvement factors were derived by analyzing the 10 most recent energy efficient MDU complexes. The third stage involved analysis of the energy saving effect generated by the improvement of windows and total heat exchangers in five selected complexes. Primary energy consumption per unit area per year improved from 158.8 to 132. kWh/m²y in complex E, which had been upgraded from ‘floor heating system’ to ‘total heat exchanger’. Finally, in the fourth stage, optimal improvement factors were selected for economic analysis. By simultaneously applying the optimal improvement factors, such as windows and total heat exchanger, to the M complex, primary energy consumption per unit area per year was improved from 147.6 to 111.4 kWh/m² y. When optimal improvement factors were applied to 59 m², 74 m², 84 m² types in complex M, life cycle cost savings of energy consumption for 30 years became $1384~1970. Full article

In this study, the effects of multi-perforated gypsum boards on floor impact noises were investigated in a box-type test building and an actual apartment building. In a box-type test building with 150 mm thick slab, various design factors such as hole pattern, hole size, opening ratio, backing, or finishing materials were considered. Heavy-weight impact sources of bang machine and rubber ball were employed. The test procedure followed KS F 2810-2, and then, a single number rating was derived in accordance with KS F 2863-2. As a result, reduction of heavy-weight impact noise by applying multi-perforated gypsum boards as a ceiling material was expected maximumly up to 3 dB for bang machine and 5 dB for rubber ball. Regarding the reduction of floor impact sounds at frequencies above 125 Hz, the installed area of the employed multi-perforated gypsum board was shown as the most dominant factor. Then, an in situ investigation using standard impact sources and five children was carried out in an actual living space of an actual apartment dwelling unit. Comparing before and after installation of multi-perforated gypsum board, 1–2 dB of heavy-weight impact noises was reduced. In addition, subjective impressions of the reduced impact noise were discussed based on the field questionnaire survey using actual children’s running situations. Full article

Digital technologies, especially information and communication technologies, paved the way for social welfare by providing efficient and effective means for services. In the energy sector, advanced metering infrastructures (AMIs) are essential for providing various services through information measurement. In this article, we focus on the deployment of an AMI in multi-dwelling units where automated meter reading (AMR) infrastructures are installed. In particular, we explore whether the AMR should substitute the AMI with few alterations, while ensuring desirable accuracy. To determine the adequacy of technology, information measurement performance, service performance, and implementation cost are used as the indicators. Through a case study using real data recorded in Korea, we quantitatively estimate that AMR-based information measurement can exhibit adequate performance and performance degradation of less than 1% in a service environment utilizing AMI with a low-cost investment. We also discuss several technologies and implementation issues in the upcycling of AMR for more reliable service. This study provides a guide for when configuring an information measurement system for a new energy service. Full article

A lack of ventilation in multi-unit dwellings can affect human health adversely owing to accumulated radon gases; therefore, developing immediate and effective methods to reduce radon gas in indoor living environments is urgently needed. Therefore, this study conducted a basic research study to develop ventilation guidelines for radon through assessments of various ventilation strategies on indoor radon concentration in multiple-unit dwellings, a typical residential type in Korea. Radon measurement was conducted in November 2020 using RAD 7 Radon Detector (Durridge Co., Billerica, MA, USA) for living rooms and rooms of an apartment located in Uijeongbu, Gyeonggi-do, Korea. The radon reduction effect according to the ventilation conditions per hour was compared and evaluated by performing seven natural ventilation scenarios through opening and closing windows leading to the outside and three types of mechanical ventilation with high, middle, and low operating intensity. The concentration ratio (C_r) was estimated to present the indoor radon increase/decrease ratio. Among the natural ventilation scenarios, Case 3 had the highest radon reduction rate in the living room and Case 1 in the room, and Case 2 using natural ventilation equipment showed the lowest reduction rate in both the room and the living room. When ventilated by mechanical ventilation conditions, the radon reduction rate (P_r) was 70% or less under all conditions. Under the natural ventilation measurement condition, when every doors and windows was opened, it showed an effective ventilation in a short time. With high mechanical ventilation, the radon reduction effect in a relatively large space was better. Additionally, with middle and low mechanical ventilation, the reduction effect seems to be good in a relatively narrow space. Full article

The house mouse, Mus musculus domesticus, creates significant public health risks for residents in low-income multi-family dwellings (MFDs). This study was designed to evaluate the spatial distribution of house mice in MFDs. Four low-income high-rise apartment buildings in three cities in New Jersey were selected for building-wide monitoring on two occasions with approximately one year between the monitoring events. The presence of a house mouse infestation was determined by placing mouse bait stations with three different non-toxic baits for a one-week period in all accessible units as well as common areas. Permutation tests were conducted to evaluate house mouse infestation spatial patterns. All four analyzed buildings exhibited a significant correlation between apartments with house mouse infestations and whether they share a common wall or ceiling/floor at both sampling periods except one building during the second inspection, which contained a high number of isolated apartments. Foraging ranges, speed of locomotion, and dispersal behavior of house mice are relatively larger, faster, and more common, respectively, compared to common urban arthropod pests. This could lead to the conclusion that house mice are as likely to infest non-neighboring apartments as those that share a wall or floor/ceiling. However, these results demonstrate that house mouse infestations tend to occur among apartments that share common walls or ceilings/floors. This spatial distribution pattern can be utilized in rodent management plans to improve the efficiency of house mouse management programs in MFDs. Full article

High morphological variation is often associated with species longevity, and it is hypothesized that urban-dwelling species may require more plasticity in functional traits such as body size in order to maximize fitness in heterogeneous environments. There has been published research regarding the functional trait diversity of urban bee pollinators. However, no two cities are identical, so the implementation of multi-city studies is vital. Therefore, we compared body size variation in female Halicus ligatus sweat bees from May–October 2016 from three distinct Midwestern United States cities: Chicago, Detroit, and Saint Louis. Additionally, to elucidate potentially influential environmental factors, we assessed the relationship between temperature and measured body size. We collected bees in community gardens and urban farms and measured their head width and intertegular distance as a proxy for overall body size. We utilized an ANCOVA to determine whether body size variation differed significantly across the three surveyed cities. Results indicated that H. ligatus females in Chicago, Detroit, and Saint Louis had significantly different body size ranges. These findings highlight the importance of intraspecific body size variation and support our prediction that bees from different urban environments will have distinct ranges in body size due to local ecological factors affecting their populations. Additionally, we found a significant influence of temperature, though this is probably not the only important ecological characteristic impacting bee body size. Therefore, we also provided a list of predictions for the future study of specific variables that are likely to impact functional trait diversity in urban bees. Full article

Population aging has led to an increased focus on the environmental context in which we age. While researchers have identified significant health benefits associated with built community features such as housing, transportation and outdoor spaces and buildings, less attention has focused on the correlates of healthy aging and other characteristics via the perspective of community-dwelling older adults. This study utilized cluster analysis to examine health-related subgroups of older adults (n = 598) in an age-friendly community located in the United States, of which nearly half of its residents are age 60 and older. Linear regression was used to associate the health clusters with perceptions of built environmental features and socio-demographics. Four distinct profiles were identified, with the greatest preference for housing and transportation found among those reporting poorer health compared to those reporting excellent health across multi-dimensional healthy aging measures. Perceptions on the importance of built environmental features were also found to vary by age, income and home accessibility status. Findings suggest that older adults’ perceptions about built environmental features differ across health and home status as well as age and income, underscoring opportunities for public health action to better reach and engage older adults by life-course trajectories in age-friendly communities. Full article

The aim of the paper is the techno-economic analysis of innovative integrated combined heat and power (CHP) systems for the exploitation of different renewable sources in the residential sector. To this purpose, a biofuel-driven organic Rankine cycle (ORC) is combined with a wind turbine, a photovoltaic system and an auxiliary boiler. The subsystems work in parallel to satisfy the electric and heat demand of final users: a block of 40 dwellings in a smart community. A 12.6 kW_el ORC is selected according to a thermal-driven strategy, while wind and solar subsystems are introduced to increase the global system efficiency and the electric self-consumption. The ORC can be switched-off or operated at partial load when solar and/or wind sources are significant. A multi-variable optimization has been carried out to find the proper size of the wind turbine and photovoltaic subsystems and to define the suitable operating strategy. To this purpose, several production wind turbines (1.0–60.0 kW_el) and photovoltaic units (0.3–63.0 kW_el) have been considered with the aim of finding the optimal trade-off between the maximum electric self-consumption and the minimum payback period and electric surplus. The multi-objective optimization suggests the integration of 12.6 kW_el ORC with 10 kW_el wind turbine and 6.3 kW_el photovoltaic subsystem. The investigation demonstrates that the proposed multi-source integrated system offers a viable solution for smart-communities and distributed energy production with a significant improvement in the global system efficiency (+7.5%) and self-consumption (+15.0%) compared to the sole ORC apparatus. Full article

This article identifies and compares the housing preferences of seniors and pre-senior citizens in Poland. In addition, the attitude of residents of large cities in the Wielkopolskie Voivodeship towards senior citizens’ housing was determined. Surveys were conducted in the two largest cities of this region. The influence of the potential behaviors of this group of society on the development of housing was also examined. Results showed that differentiation of housing preferences was visible primarily when choosing the type of development and size of the dwelling. Seniors preferred smaller units in multi-family housing construction. Pre-senior citizens, on the other hand, were more likely to think about living in a single-family house. The location of a new dwelling was also important. Seniors, more often than people aged 50–59, chose a location in the city center. Pre-senior citizens, in contrast, more often decided to live in a rural area or outside the city center. Moreover, the attitude of seniors towards senior citizens’ housing is undecided, which may indicate that many people may change their housing preferences in the future and decide to move. Full article

No research has examined the prevalence of involuntary cannabis exposure in the home within the context of multi-unit housing (MUH). The 2017 cycle of the Centre for Addiction and Mental Health Monitor population RDD survey included measures of environmental cannabis smoke (ECS) and environmental tobacco smoke (ETS) for Ontario, Canada. These ECS measures were defined for those who did not live in a detached dwelling self-reporting noticing any tobacco or cannabis smoke enter the home from a neighboring unit or from outside the building at least once in the past 6 months. Overall, 6.6% (95% CI: 4.5–9.5%) and 7.5% (9% CI: 5.4–10.4%) of the population reported being exposed to ETS and ECS in MUH respectively. Individuals exposed to ECS were single, had used cannabis in the past 12 months, and had lower household incomes. The prevalence of involuntary exposure to cannabis smoke is similar to exposure to tobacco smoke. Exposure correlates were primarily associated with characteristics of those who lived in MUH who tend to be members of more vulnerable populations. Full article