Search Results (273)

In the rapidly evolving fields of materials science, catalysis, electronics, drug delivery, and environmental remediation, the development of effective substrates for molecular deposition has become increasingly crucial. Ordered mesoporous silica materials have garnered significant attention due to their unique structural properties and exceptional potential as substrates for molecular immobilization across these diverse applications. This study compares three mesoporous silica powders: MCM-41, SBA-15, and SBA-16. A multi-technique characterization approach was employed, utilizing low- and wide-angle X-ray diffraction (XRD), nitrogen physisorption, and transmission electron microscopy (TEM) to elucidate the structure–property relationships of these materials. XRD analysis confirmed the amorphous nature of silica frameworks and revealed distinct pore symmetries: a two-dimensional hexagonal (P6mm) structure for MCM-41 and SBA-15, and three-dimensional cubic (Im$\overline{3}$m) structure for SBA-16. Nitrogen sorption measurements demonstrated significant variations in textural properties, with MCM-41 exhibiting uniform cylindrical mesopores and the highest surface area, SBA-15 displaying hierarchical meso- and microporosity confirmed by NLDFT analysis, and SBA-16 showing a complex 3D interconnected cage-like structure with broad pore size distribution. TEM imaging provided direct visualization of particle morphology and internal pore architecture, enabling estimation of lattice parameters and identification of structural gradients within individual particles. The integration of these complementary techniques proved essential for comprehensive material characterization, particularly for MCM-41, where its small particle size (45–75 nm) contributed to apparent structural inconsistencies between XRD and sorption data. This integrated analytical approach provides valuable insights into the fundamental structure–property relationships governing ordered mesoporous silica materials and demonstrates the necessity of combined characterization strategies for accurate structural determination. Full article

Moroccan oil shale ash (MOSA) represents an underutilized industrial by-product, particularly in the Rif region, where its high mineral content has often led to its neglect in value-added applications. This study highlights the successful conversion of MOSA into amorphous mesoporous silica (AS-Si) using a sol–gel process assisted by polyethylene glycol (PEG-6000) as a soft template. The resulting AS-Si material was extensively characterized to confirm its potential for environmental remediation. FTIR analysis revealed characteristic vibrational bands corresponding to Si–OH and Si–O–Si bonds, while XRD confirmed its amorphous nature with a broad diffraction peak at 2θ ≈ 22.5°. SEM imaging revealed a highly porous, sponge-like morphology composed of aggregated nanoscale particles, consistent with the nitrogen adsorption–desorption isotherm. The material exhibited a specific surface area of 68 m²/g, a maximum in the pore size distribution at a pore diameter of 2.4 nm, and a cumulative pore volume of 0.11 cm³/g for pores up to 78 nm. DLS analysis indicated an average hydrodynamic diameter of 779 nm with moderate polydispersity (PDI = 0.48), while a zeta potential of –34.10 mV confirmed good colloidal stability. Furthermore, thermogravimetric analysis (TGA) and DSC suggested the thermal stability of our amorphous silica. The adsorption performance of AS-Si was evaluated using methylene blue (MB) and ciprofloxacin (Cipro) as model pollutants. Kinetic data were best fitted by the pseudo-second-order model, while isotherm studies favored the Langmuir model, suggesting monolayer adsorption. AS-Si could be used four times for the removal of MB and Cipro. These results collectively demonstrate that AS-Si is a promising, low-cost, and sustainable adsorbent derived from Moroccan oil shale ash for the effective removal of organic contaminants from aqueous media. Full article

Sheath blight (ShB), caused by the necrotrophic fungus Rhizoctonia solani, is one of the most serious rice diseases worldwide. In this study, we successfully grafted salicylic acid (SA) onto mesoporous silica nanoparticles through an amide-bond coupling method, forming functionalized MSN-SA nanoparticles. Physicochemical characterization showed that the MSN-SA nanoparticles were spherical, with an average particle size of approximately 30 nm and an SA loading rate of around 7.21%. The assessment of ShB resistance revealed that both SA and MSN-OH treatments were capable of inducing resistance to a certain extent. When SA and MSN-OH were applied in combination, the resistance was further augmented, indicating an additive effect between them. Intriguingly, MSN-SA treatment (50% in Lemont) exhibited a higher and more durable control efficacy compared with SA + MSN-OH treatment (33%). Moreover, field experiments demonstrated that the MSN-SA was safe for rice, and under severe disease conditions, it could recover 16.7% of the yield loss, thus highlighting its substantial application value. Further transcriptome analysis and physicochemical assays suggested that MSN-SA released SA in a slow and continuous manner, thus persistently activating the immune response, and that MSN-SA integrated the effects of SA and MSN-OH, thereby enhancing the ShB resistance. Altogether, our results provide new perspectives and a novel nanomaterial-based immune elicitor for the green control of ShB. Full article

β-cypermethrin (BCP) is a broad-spectrum insecticide known for its rapid efficacy. However, it is highly toxic to non-target organisms such as bees and fish, and its effectiveness is limited by a short duration of action. Improving the release profile of BCP is essential for reducing its environmental toxicity while preserving its effectiveness. In this study, hollow mesoporous silica nanoparticles (HMSNs) were synthesized using a self-templating method, and BCP-loaded HMSNs were prepared through physical adsorption. The structural and physicochemical properties of the nanoparticles were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption–desorption analysis, Fourier transform infrared (FT-IR) spectroscopy, dynamic light scattering (DLS), and thermogravimetric analysis (TGA). The BCP release profile was assessed using the dialysis bag method. The results showed that the synthesized nanoparticles exhibited uniform morphology, thin shells, and large internal cavities. The HMSNs had a pore size of 3.09 nm, a specific surface area of 1318 m²·g⁻¹, a pore volume of 1.52 cm³·g⁻¹, and an average particle size of 183 nm. TEM, FT-IR, and TGA analyses confirmed the successful incorporation of BCP into the HMSNs, achieving a drug loading efficiency of 32.53%. The BCP-loaded nanoparticles exhibited sustained-release properties, with an initial burst followed by gradual release, extending efficacy for 30 days. Safety evaluations revealed minimal toxicity to maize seedlings, confirming the biocompatibility of the nanoparticles. These findings indicate that BCP-loaded HMSNs can enhance the efficacy of BCP while reducing its environmental toxicity, providing a biocompatible and environmentally friendly solution for pest control. Full article

A mesoporous anatase/silica core–shell nanostructure (ASCS) was synthesized via a sol–gel method at 90 °C, and then cadmium sulfide quantum dots (CdS-QDs) were encapsulated in it, forming CdS-ASCS. The CdS-ASCS was synthesized to enhance the efficiency of heterogeneous nanophotocatalysts. The CdS-ASCS nanoparticles exhibited a core–shell morphology with a particle size of approximately 1.8 nm and a shell thickness of about 8 nm. The uniform distribution of cadmium, sulfur, titanium, and silicon was observed, along with a pore radius of roughly 2.5 nm and a bandgap energy of approximately 3.2 eV. Under ultraviolet irradiation, the CdS-ASCS demonstrated a photocatalytic degradation of 91% for methylene blue (MB) within 240 min, with a rate constant of 0.01 min⁻¹. These findings suggested that CdS-ASCS is a highly effective photocatalyst with promising applications in water purification. Full article

This study developed a solid self-nanoemulsifying drug delivery system (S-SNEDDS) to improve the oral bioavailability of poorly soluble carvedilol using mesoporous silica nanoparticles (MSNs). The liquid self-nanoemulsifying drug delivery system (L-SNEDDS) consisted of carvedilol, Peceol, Tween 80, and Labrasol in a weight ratio of 10:25:50:25. The liquid SNEDDS was suspended in MSN at various ratios and spray-dried to produce S-SNEDDS. The emulsion size, PDI, solubility, and dissolution of various ratios of MSN were evaluated to make the optimal S-SNEDDS. The optimal S-SNEDDS, manufactured using a ratio of MSN to L-SNEDDS 1000 at 500, formed a nanoemulsion and achieved efficient supersaturation compared to carvedilol alone, which significantly improved drug solubility (approximately 400 times), dissolution (approximately 5.7 times at 60 min), area under the curve (AUC) (21.7 times), and maximum plasma concentration (Cmax) (15.7 times). In addition, the physicochemical properties of the optimal S-SNEDDS were evaluated by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), Fourier transform infrared (FT-IR), particle size, and scanning electron microscopy (SEM) images. S-SNEDDS showed a smaller particle size than MSN alone, and the crystalline drug was transformed into an amorphous substance, resulting in encapsulation in MSN. These results suggest that MSN can be a novel biocompatible carrier contributing to a safer and more effective delivery system. Full article

Mesoporous silica sieves have been prepared through sol–gel synthesis using diester gemini surfactants as pore templates, aiming to obtain new materials with potential use for water remediation. A series of mesoporous spherical silica particles of submicron size have been prepared in an alkali-catalyzed reaction, using a tetraethyl orthosilicate precursor and bis-quaternary ammonium gemini surfactants with diester spacers of varied lengths as pore-forming agents. The effect of the spacer length on the particle morphology was studied using nitrogen porosimetry, small-angle X-ray scattering (SAXS), ultra-small-angle neutron scattering, scanning, and transmission electron microscopy (SEM, TEM). The results revealed that for all spacer lengths, a long-range hexagonal pore ordering developed in the materials. The silica particles were nearly spherical, with sizes below 1 micrometer, and a weak dependence of the mean particle size on the spacer length could be observed. The template removal procedure had a strong influence on the porosity: calcination caused a moderate shrinkage of the pores while retaining the hexagonal structure, whereas treatment with acidified ethanol resulted in only partial removal of the surfactants; however, the hexagonal structure was severely destroyed. The applicability of the obtained calcined materials as adsorbents for heavy metal ions from water was studied with the example of Pb(II). A high sorption capacity of 110 mg/g was obtained in batch experiments, at pH 5 and 4 h contact time. Full article

Background: Polymer-coated mesoporous silica nanoparticles have attracted immense research interest in stimuli-responsive drug delivery systems due to their drug-releasing ability on demand at specific sites in response to external or internal signals. However, the relationships between the coated-copolymer encapsulation and drug delivery performance in the hybrid nanocomposites was rarely reported. Therefore, the main objectives of the present work are to explore the cell uptake, cellular internalization, cytotoxicity, and hemolysis performance of the fluorescent hybrid materials with different polymer-encapsulated amounts. Methods: Using (2-(2-aminoethyl)-6-(dimethylamino)-1H-benzo[de]isoquinoline-1,3(2H)-dione)-doped poly[(N-isopropylacrylamide)-co-(acrylic acid)] (PAN) as a shell and bimodal mesoporous silicas (BMMs) as a core, the dual pH- and temperature-responsive mesoporous PAN@M-BMMs with the fluorescent performances were synthesized via a radical polymerization approach. The effects of the PAN-coated thicknesses on their physicochemical properties and structural features were demonstrated via XRD and SAXS patterns, SEM and TEM images, FT-IR spectra, and TG analysis. Their mass fractal (D_m) evolutions were elucidated on the basis of the SAXS patterns and fluorescence spectra. Results: The D_m values increased from 2.74 to 2.87 with an increase of the PAN-coated amount from 17 to 26.5% along with the particle size from 76.1 to 85.6 nm and blue-shifting of their fluorescent emission wavelength from 470 to 444 nm. Meanwhile, the PAN@M-BMMs exhibited a high ibuprofen (IBU) loading capacity (13.8%) and strong dual pH-/temperature-responsive drug-releasing performances (83.1%) at pH 7.4 and 25 °C, as comparison with that (17.9%) at pH 2.0 and 37 °C. The simulated results confirmed that the adsorption energy decreased from −67.18 kJ/mol for pure BMMs to −116.76 kJ/mol for PAN@M-BMMs, indicating the PAN-grafting on the surfaces of the BMMs core was beneficial to improve its IBU-adsorption capacity. Its uptake in the HeLa cell line was performed via microplate readers, confocal microscopy, flow cytometry, and ICP measurement, showing a low cytotoxicity at a concentration up to 100 µg/mL. Specially, P_0.2AN@M-BMMs had a superior cellular uptake and fluorescence properties via the time-dependent uptake experiments, and exhibited the highest silicon content via the cellular internalization analysis, as compared to other carriers. Hemolysis tests confirmed the hemolysis rates below 5%. Conclusions: These demonstrations verified that PAN@M-BMMs should be a promising biomedical application prospect. Full article

Silica aerogels are extensively used as catalyst supports due to their mesoporous structure and chemical inertness. In this study, SiO₂–AuNP aerogels containing gold nanoparticles (AuNPs) were synthesized using the sol-gel method followed by supercritical CO₂ drying. The inclusion of polyvinyl pyrrolidone (PVP) as a stabilizing agent preserved the gold particle sizes during the gelation process. In contrast, aerogels synthesized without PVP contained enlarged AuNP aggregates, resulting in a shift in the plasmon resonance color from red to bluish or blue–grey. Thermal treatment of these bluish-colored aerogels at high temperatures restored their red coloration, visually indicating the breakdown of large gold clusters into individual nanoparticles. Both types of aerogels were characterized using SEM, TEM, 3D optical microscopy, UV–vis and ATR-IR spectroscopy, and N₂ porosimetry, with their properties analyzed as a function of annealing temperature. Their catalytic activity was evaluated through the reduction of 4-nitrophenol with sodium borohydride, and both aerogel types demonstrated catalytic activity. This thermal conversion of large clusters into individual nanoparticles within an aerogel matrix introduces a new and promising approach for creating catalytically active nanogold-containing aerogel catalysts. Full article

Breast cancer is a common clinical malignant tumor that seriously threatens women’s physical and mental health. Chemotherapy, as the first choice of breast cancer treatment, has limited its application in the clinic due to problems of poor stability, short half-life, and serious toxic side effects. With the emergence of nanotechnology, inorganic materials to prepare mesoporous silica nanoparticles (MSNs) have been widely used in anti-tumor drug carriers. However, their slow degradation rate limits their application in the biomedical field. Therefore, developing low-toxicity MSNs with good biocompatibility, biodegradability, and rapid release at the tumor site is a key scientific issue to be addressed. Here, we prepared DOX-loaded Ca-Mg-doped MSNs by electrostatic adsorption to obtain Ca-Mg@DOX@MSNs with suitable particle sizes and zeta potential, and the incorporation of calcium and magnesium also led to an increase in the degradation rate under acidic conditions and an accelerated release, which reduced the toxicity of DOX and promoted cellular uptake with good anti-tumor effects. This study provides a new idea for the clinical treatment of breast cancer. Full article

The textural properties of synthetic and natural clays in the sodium form and exchanged with tetramethylammonium cations (TMA⁺) were characterized using N₂ and Ar physisorption isotherms at cryogenic temperatures. Specific surface areas and micro/mesoporous volumes were determined using the BET and the t-plot models. The t-plot analysis requires the use of reference isotherms measured at the same temperature on the surface of non-porous materials with an identical chemical composition. In order to better assess the effects of chemical heterogeneities in the clay particles, reference isotherms representative of silica surfaces were taken into account in the analysis of the t-curve and corrected to account for variations in curvature at the interface of the film adsorbed in the micropores. In addition, high-resolution Ar adsorption isotherms at 87 K were analyzed using the Derivative Isotherm Summation (DIS) method to quantify the energy contributions of adsorption sites and determine the fractions of basal and lateral surfaces of clay particles. The high-energy adsorption sites, identified in the low-pressure range, were attributed to intra-particle microporosity due to stacking defects and/or open inter-layer spaces. These sites were differentiated from those on the lateral and basal surfaces of the particles. A modification of the DIS method was proposed to measure these contributions and improve the fit with the experimental data. The results show that TMA⁺ cation exchange significantly increases the microporosity of clays compared to their sodic form, which can be attributed to the increased contribution of intra-particle adsorption sites due to interlayer expansion. Full article

This work presents a novel hydrothermally aided sol-gel method for preparation of mesoporous silica nanoparticles (MSNs) with a narrow particle size distribution and varied pore sizes. The method was carried out in alkaline media in presence of polyethylene glycol (PEG) and cetyltrimethylammonium chloride (CTAC) as dual templates and permitted the synthesis of spherical mesoporous silica with a high surface area (1011.42 m²/g). The MSN materials were characterized by FTIR, Thermogravimetric (TG), Nitrogen adsorption and desorption and Field emission scanning electron microscopic analysis (FESEM). The materials feasibility as solid phase adsorbent has been demonstrated using cationic dyes; Rhodamine B (RB) and methylene blue (MB) as models. Due to the large surface area and variable pore width, the adsorption behaviors toward cationic dyes showed outstanding removal efficiency and a rapid sorption rate. The adsorption isotherms of RB and MB were well-fitted to the Langmuir and Freundlich models, while the kinetic behaviours adhered closely to the pseudo-second-order pattern. The maximum adsorption capacities were determined to be 256 mg/g for MB and 110.3 mg/g for RB. The findings suggest that MSNs hold significant potential as solid-phase nanosorbents for the extraction and purification of dye pollutants, particularly in the analysis and treatment of effluents containing cationic dyes. Full article

Androgenetic alopecia (AGA) is caused by the impact of dihydrotestosterone (DHT) on hair follicles, leading to progressive hair loss in men and women. In this study, we developed caffeine-loaded hollow mesoporous silica nanoparticles coated with ultradeformable liposomes (ULp-Caf@HMSNs) to enhance caffeine delivery to hair follicles. Caffeine, known to inhibit DHT formation, faces challenges in skin penetration due to its hydrophilic nature. We investigated caffeine encapsulated in liposomes, hollow mesoporous silica nanoparticles (HMSNs), and ultradeformable liposome-coated HMSNs to optimize drug delivery and release. For ultradeformable liposomes (ULs), the amount of polysorbate 20 and polysorbate 80 was varied. TEM images confirmed the mesoporous shell and hollow core structure of HMSNs, with a shell thickness of 25–35 nm and a hollow space of 80–100 nm. SEM and TEM analysis showed particle sizes ranging from 140–160 nm. Thermal stability tests showed that HMSNs coated with ULs exhibited a Td₁₀ value of 325 °C and 70% residue ash, indicating good thermal stability. Caffeine release experiments indicated that the highest release occurred in caffeine-loaded HMSNs without a liposome coating. In contrast, systems incorporating ULp-Caf@HMSNs exhibited slower release rates, attributable to the dual encapsulation mechanism. Confocal laser scanning microscopy revealed that ULs-coated particles penetrated deeper into the skin than non-liposome particles. MTT assays confirmed the non-cytotoxicity of all HMSN concentrations to human follicle dermal papilla cells (HFDPCs). ULp-Caf@HMSNs promoted better cell viability than pure caffeine or caffeine-loaded HMSNs, highlighting enhanced biocompatibility without increased toxicity. Additionally, ULp-Caf@HMSNs effectively reduced ROS levels in DHT-damaged HFDPCs, suggesting they are promising alternatives to minoxidil for promoting hair follicle growth and reducing hair loss without increasing oxidative stress. This system shows promise for treating AGA. Full article

Background/Objectives: Amorphization of an active pharmaceutical ingredient (API) can improve its dissolution and enhance bioavailability. Avoiding solvents for drug amorphization is beneficial due to environmental issues and potential solvent residues in the final product. Methods: Dry amorphization using a twin-screw extruder is presented in this paper. A blend of mesoporous silica particles and crystalline itraconazole was processed using a pharma-grade laboratory scale twin-screw extruder. The influence of different screw configurations and process parameters was tested. Particle size and shape are compared in scanning electron microscopy (SEM) images. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) are used to determine the residual amount of crystalline itraconazole in the final product. Results: An optimized screw configuration for the process was found which leads to more than 90% amorphous API when processed at room temperature. Full amorphization was reached at 70 °C. The specific mechanic energy (SME) introduced into the material during twin-screw processing is crucial for the dry amorphization. The higher the SME, the lower the residual amount of crystalline API. Two months after processing, however, recrystallization was observed by XRD. Conclusions: Dry processing using a twin-screw extruder is continuous, free of solvents and can be performed at low temperatures. This study proves the concept of twin-screw processing with mesoporous silica for dry amorphization of itraconazole. Full article

Levocetirizine dihydrochloride is an effective antiallergenic drug applied mostly orally; however, developing a topical formulation for localized treatment could be beneficial. To achieve this, a modified formulation technique is necessary to enhance bioavailability efficiency and minimize possible side effects. Therefore, levocetirizine particles were prepared by immobilization on mesoporous silica material. Both the dihydrochloride form and its free base of levocetirizine were fixed on a silica-type Syloid support. Immobilization of the active ingredient levocetirizine in a free base form on a Syloid support by mixing in a dichloromethane solution provides better surface coverage (65.5%) than immobilization in the dihydrochloride form in water or methanol (24.5% for both). The successful binding of levocetirizine was confirmed by X-ray photoelectron spectroscopy and infrared measurements. The active ingredient in the form of hydrochloride is more likely to be in the pores, while the free base is bound to the surface in larger quantities. The time-dependent levocetirizine release showed that the liberation of the active ingredient from the Syloid is slower than the dissolution of the starting active ingredient itself, so it may be suitable for exerting a more reliable and prolonged local effect. A gel containing a Syloid-fixed levocetirizine free base was tested in vivo in a croton oil-induced ear edema mouse model. When compared to a reference gel, the half-dose formulation containing levocetirizine free base demonstrated a similar efficacy to Fenistil gel, indicating that the new formulation may offer superior effectiveness at lower doses. Full article