Search Results (394)

Ultrafiltration strips water of bacteria. The common misconception is that the filtrate is thus free of bacteria. This only applies, however, in the case that the filtrate compartment is sterile. In real-world applications, the filtrate is rapidly re-colonized, followed by regrowth. In extreme cases of low water usage, the cell numbers in the filtrate can even exceed those in the feed water, probably due to a combination of the microbial enrichment of the bulk water from surfaces, regrowth in the water body itself, and nutrient enrichment on the filter membrane. Regrowth is made possible because dissolved nutrients can freely pass through the membranes. This explains why the initial decrease in cell numbers in drinking water installation systems with ultrafiltration is often followed by an increase in the periphery of the plumbing system. The extent of actual regrowth hereby depends mostly on water usage behaviours. A shorter frequency of membrane wash cycles is beneficial for reducing cell numbers. Neither frequent wash cycles nor cleaning in place (CIP) in filtration units, however, seem to modulate the maximal regrowth potential. Although the effect of ultrafiltration on cell numbers is not sustainable, it causes profound changes in the bacterial communities, with highly distinct populations in the feed water and the filtrate. The microbiological “reset” is demonstrated using examples both from the fields of drinking water and water reuse. Overall, our results suggest that ultrafiltration has a profound impact on the microbiome, but the cell numbers in filtrates depend mostly on the water usage and operational conditions. Full article

The advancement of catalytic materials is critical to improving the performance, reducing the cost and enhancing the sustainability of Proton Exchange Membrane (PEM) fuel cells and electrolyzers. Although Platinum Group Metal (PGM)-based electrocatalysts exhibit high electrochemical activity, their limited availability and the environmentally intensive extraction pose significant challenges. This study aims to demonstrate the direct reuse of recycled impure platinum (Pt) precursors for the synthesis of effective Pt/C electrocatalysts as a viable step toward circular hydrogen economy implementation. A low-cost and eco-friendly chlorine-based hydrometallurgical method was successfully employed to recycle over 99% of Pt from End-of-Life (EoL) Membrane Electrode Assemblies (MEAs), with an industrial perspective. Recycled metal precursor was used without purification to synthesize Pt/C electrocatalyst via a scalable and sustainable method. The catalyst was structurally and chemically characterized, and their electrochemical performance towards the Oxygen Reduction Reaction (ORR) was conducted under conditions simulating real operating environments. The recycled-metal-derived catalyst demonstrated comparable activity toward ORR (170 A/gPt) relative to a commercial catalyst, indicating its potential as viable alternative to conventional PGM-based catalysts. By integrating energy-efficient recycling with advanced material design, this work supports the development of cost-effective and green solutions for clean energy technologies aligned with a circular hydrogen economy model. Full article

As the supply of cocoa becomes increasingly volatile, biotechnological innovations such as lipid engineering with lipases play a crucial role in supporting more stable, ethical, and sustainable chocolate production systems. This study explores the potential of Pseudomonas fluorescens lipase immobilized on eggshell membrane-based carriers for the synthesis of a cocoa butter substitute (CBS). The carriers were prepared by treating eggshells with different acids to generate chemically distinct support materials. Lipase immobilization was performed using both adsorption and covalent binding techniques. All resulting biocatalysts were characterized and compared to the free enzyme with respect to pH and temperature optima, as well as thermal and solvent stability. Immobilization caused shifts in the enzyme’s optimal operating conditions and significantly improved its stability at elevated temperatures and in the presence of organic solvents. Among the tested systems, the lipase immobilized by adsorption onto a hydrochloric acid-treated carrier exhibited the best performance. Using this biocatalyst, a CBS containing 93.54 ± 0.16% of the target triacylglycerols (POP, POS, and SOS) was successfully synthesized and reused over five consecutive synthesis cycles without significant loss of activity. These findings demonstrate the potential of waste-derived biomaterials for the development of efficient, stable, and reusable biocatalysts in the enzymatic production of functional lipids. Full article

Produced water, a byproduct of oil and gas extraction, poses significant environmental challenges due to its complex composition and high salinity. Conventional treatment technologies often struggle to achieve efficient contaminant removal while maintaining long-term operational stability. Membrane-based separation processes, particularly forward osmosis (FO), offer a promising alternative due to their low hydraulic pressure requirements, high selectivity, and ability to mitigate fouling and scaling effects. This study fabricated and evaluated a novel dual-layer zwitterion-modified electrospun nanofibrous membrane for enhanced produced water (PW) treatment. The dual-layer design consists of a highly porous electrospun nanofibrous support layer for improved permeability and mechanical strength, coupled with a zwitterionic-modified selective layer to enhance antifouling properties and selective contaminant rejection. The zwitterionic surface modification imparts superior hydration capacity, reducing organic and biological fouling while improving water transport efficiency. The membranes are characterized using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD), contact angle and tensile strength measurements, and nuclear magnetic resonance (NMR) spectroscopy to assess their morphological, structural, and chemical properties. The performance evaluations demonstrated significantly higher water flux (up to 16.05 L m⁻² h⁻¹ for SPW (synthetic produced water) and 6.00 L m⁻² h⁻¹ for PW using NaBr) and excellent solid rejection (up to 96.02% for SPW and 88.90% for PW), reduced concentration polarization, and superior antifouling performance compared to conventional FO membranes. Experimental results from bench-scale trials demonstrate that this advanced membrane technology offers enhanced water recovery and contaminant removal efficiency, making it a viable solution for industrial-scale PW treatment and reuse. The findings underscore the potential of next-generation dual-layer FO membranes in promoting sustainable water resource management within the oil and gas sector while minimizing environmental impact. Full article

The dairy industry generates significant amounts of wastewater, including microfiltration (MF) retentate, a byproduct thickened with organic and inorganic pollutants. This study focuses on the treatment of two times concentrated MF retentate using a hybrid system based on biological treatment in a sequential batch reactor (SBR) and adsorption on activated carbon. The first stage involved cross-flow microfiltration using a 0.2 µm PVDF membrane at 0.5 bar, resulting in reductions of 99% in turbidity and 79% in chemical oxygen demand (COD), as well as a partial reduction in conductivity. The second stage involved 24-h biological treatment in a sequential batch reactor (SBR) with activated sludge (activated sludge index: 80 cm³/g, MLSS 2500 mg/dm³), resulting in further reductions in COD (62%) and TOC (30%), as well as the removal of 46% of total phosphorus (TP) and 35% of total nitrogen (TN). In the third stage, the decantate underwent adsorption in a column containing powdered activated carbon (PAC; 1 g; S_(BET) = 969 m² g⁻¹), reducing the concentrations of key indicators to the following levels: COD 84%, TOC 70%, TN 77%, TP 87% and suspended solids 97%. Total pollutant retention ranged from 24.6% to 97.0%. These results confirm that the MF–SBR–PAC system is an effective, compact solution that significantly reduces the load of organic and biogenic pollutants in MF retentates, paving the way for their reuse or safe discharge into the environment. Full article

Magnetic nanoparticles (MNPs), especially iron oxide (Fe₃O₄), display distinctive superparamagnetic characteristics and elevated surface-area-to-volume ratios, facilitating improved physicochemical interactions with solutes and pollutants. These characteristics make MNPs strong contenders for use in water treatment applications. This research investigates the application of iron oxide MNPs synthesized via co-precipitation as innovative draw solutes in forward osmosis (FO) for treating synthetic produced water (SPW). The FO membrane underwent surface modification with sulfobetaine methacrylate (SBMA), a zwitterionic polymer, to increase hydrophilicity, minimize fouling, and elevate water flux. The SBMA functional groups aid in electrostatic repulsion of organic and inorganic contaminants, simultaneously encouraging robust hydration layers that improve water permeability. This adjustment is vital for sustaining consistent flux performance while functioning with MNP-based draw solutions. Material analysis through thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR) verified the MNPs’ thermal stability, consistent morphology, and modified surface chemistry. The FO experiments showed a distinct relationship between MNP concentration and osmotic efficiency. At an MNP dosage of 10 g/L, the peak real-time flux was observed at around 3.5–4.0 L/m²·h. After magnetic regeneration, 7.8 g of retrieved MNPs generated a steady flow of ~2.8 L/m²·h, whereas a subsequent regeneration (4.06 g) resulted in ~1.5 L/m²·h, demonstrating partial preservation of osmotic driving capability. Post-FO draw solutions, after filtration, exhibited total dissolved solids (TDS) measurements that varied from 2.5 mg/L (0 g/L MNP) to 227.1 mg/L (10 g/L MNP), further validating the effective dispersion and solute contribution of MNPs. The TDS of regenerated MNP solutions stayed similar to that of their fresh versions, indicating minimal loss of solute activity during the recycling process. The combined synergistic application of SBMA-modified FO membranes and regenerable MNP draw solutes showcases an effective and sustainable method for treating produced water, providing excellent water recovery, consistent operational stability, and opportunities for cyclic reuse. Full article

In this study, we report the development of a novel magnetized coal fly ash-supported nano-silver composite (AgNPs/MCFA) for dual-functional applications in wastewater treatment: the efficient degradation of methyl orange (MO) dye and broad-spectrum antibacterial activity. The composite was synthesized via a facile impregnation–reduction–sintering route, utilizing sodium citrate as both a reducing and stabilizing agent. The AgNPs/MCFA composite was systematically characterized through multiple analytical techniques, including Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and vibrating sample magnetometry (VSM). The results confirmed the uniform dispersion of AgNPs (average size: 13.97 nm) on the MCFA matrix, where the formation of chemical bonds (Ag-O-Si) contributed to the enhanced stability of the material. Under optimized conditions (0.5 g·L⁻¹ AgNO₃, 250 °C sintering temperature, and 2 h sintering time), AgNPs/MCFA exhibited an exceptional catalytic performance, achieving 99.89% MO degradation within 15 min (pseudo-first-order rate constant k_a = 0.3133 min⁻¹) in the presence of NaBH₄. The composite also demonstrated potent antibacterial efficacy against Escherichia coli (MIC = 0.5 mg·mL⁻¹) and Staphylococcus aureus (MIC = 2 mg·mL⁻¹), attributed to membrane disruption, intracellular content leakage, and reactive oxygen species generation. Remarkably, AgNPs/MCFA retained >90% catalytic and antibacterial efficiency after five reuse cycles, enabled by its magnetic recoverability. By repurposing industrial waste (coal fly ash) as a low-cost carrier, this work provides a sustainable strategy to mitigate nanoparticle aggregation and environmental risks while enhancing multifunctional performance in water remediation. Full article

The food industry consumes large amounts of water across various processes, and generates wastewater characterized by parameters like biochemical oxygen demand, chemical oxygen demand, pH, suspended solids, and nutrients. To meet environmental standards and enable reuse or valorization, treatment methods such as physicochemical, biological, and membrane-based processes are applied. This review focuses on the valorization of food industry wastewater in the biotechnological production of high-value products, with an emphasis on starch-rich wastewater, wineries and confectionery industry wastewater, and with a focus on new technologies for reduces environmental burden but also supports circular economy principles. Starch-rich wastewaters, particularly those generated by the potato processing industry, offer considerable potential for biotechnological valorization due to their high content of soluble starch, proteins, organic acids, minerals, and lipids. These effluents can be efficiently converted by various fungi (e.g., Aspergillus, Trichoderma) and yeasts (e.g., Rhodotorula, Candida) into value-added products such as lipids for biodiesel, organic acids, microbial proteins, carotenoids, and biofungicides. Similarly, winery wastewaters, characterized by elevated concentrations of sugars and polyphenols, have been successfully utilized as medium for microbial cultivation and product synthesis. Microorganisms belonging to the genera Aspergillus, Trichoderma, Chlorella, Klebsiella, and Xanthomonas have demonstrated the ability to transform these effluents into biofuels, microbial biomass, biopolymers, and proteins, contributing to sustainable bioprocess development. Additionally, wastewater from the confectionery industry, rich in sugars, proteins, and lipids, serves as a favorable fermentation medium for the production of xanthan gum, bioethanol, biopesticides, and bioplastics (e.g., PHA and PHB). Microorganisms of the genera Xanthomonas, Bacillus, Zymomonas, and Cupriavidus are commonly employed in these processes. Although there are still certain regulatory issues, research gaps, and the need for more detailed economic analysis and kinetics of such production, we can conclude that this type of biotechnological production on waste streams has great potential, contributing to environmental sustainability and advancing the principles of the circular economy. Full article

As sensitive parts of the water treatment process, reverse osmosis (RO) membranes are the most important for desalination and wastewater treatment. But the performance of RO membranes deteriorates over time due to fouling, necessitating frequent replacements. One of the environmental challenges is the disposal of End-of-Life (EoL) RO membranes, which are made of non-biodegradable polymers. The reuse of EoL membranes as a sustainable approach for waste saving and resource efficiency has recently attracted considerable attention. The present work provides a comprehensive overview of the strategies for reusing EoL RO membranes as sustainable alternatives to conventional disposal methods. Furthermore, the fundamental principles of RO technology, the primary types and impacts of membrane fouling, and advanced cleaning and regeneration techniques are discussed. The conversion of EoL membranes into nanofiltration (NF), ultrafiltration (UF), and forward osmosis (FO) membranes is also covered in this review, as well as their uses in brackish water desalination, dye/salt separation, groundwater treatment, and household wastewater reuse. Environmental and economic benefits, as well as technical, social, and regulatory challenges, are also discussed. Finally, the review highlights innovative approaches and future directions for incorporating EoL membrane reuse into circular economy models, outlining its potential to improve sustainability and reduce operational costs in water treatment systems. Full article

The transition toward a circular water economy addresses accelerating water scarcity and pollution. A PRISMA-2020 systematic review of 50 peer-reviewed articles (January 2018–April 2024) mapped current technologies and management strategies, seeking patterns, barriers, and critical bottlenecks. Bibliometric analysis revealed the following three dominant patterns: (i) rapid diffusion of membrane bioreactors, constructed wetlands, and advanced oxidation processes; (ii) research geographically concentrated in Asia and the European Union; (iii) industry’s marked preference for by-product valorization. Key barriers—high energy costs, fragmented regulatory frameworks, and low social acceptance—converge as critical constraints during scale-up. The following three practical action lines emerge: (1) adopt progressive tariffs and targeted tax credits that internalize environmental externalities; (2) harmonize water-reuse regulations with comparable circularity metrics; (3) create multi-actor platforms that co-design projects, boosting local legitimacy. These findings provide policymakers and water-sector practitioners with a clear roadmap for accelerating Sustainable Development Goals 6, 9, and 12 through circular, inclusive, low-carbon water systems. Full article

Electrospun nanofiber membranes based on cellulose acetate (CA) have gained increasing attention for wastewater treatment due to their high surface area, tuneable structure, and ease of functionalization. In this study, the performance of CA membranes was enhanced by incorporating aluminum oxide (Al₂O₃) nanoparticles (NPs) at varying concentrations (0–2 wt.%). The structural, morphological, and thermal properties of the resulting CA/Al₂O₃ nanocomposite membranes were investigated through FTIR, XRD, SEM, water contact angle (WCA), pore size measurements, and DSC analyses. FTIR and XRD confirmed strong interactions and the uniform dispersion of the Al₂O₃ NPs within the CA matrix. The incorporation of Al₂O₃ improved membrane hydrophilicity, reducing the WCA from 107° to 35°, and increased the average pore size from 0.62 µm to 0.86 µm. These modifications led to enhanced filtration performance, with the membrane containing 2 wt.% Al₂O₃ achieving a 99% removal efficiency for Indigo Carmine (IC) dye, a maximum adsorption capacity of 45.59 mg/g, and a high permeate flux of 175.47 L·m⁻² h⁻¹ bar⁻¹. Additionally, phytotoxicity tests using Lactuca sativa seeds showed a significant increase in germination index from 20% (untreated) to 88% (treated), confirming the safety of the permeate for potential reuse in agricultural irrigation. These results highlight the effectiveness of Al₂O₃-modified CA electrospun membranes for sustainable wastewater treatment and water reuse. Full article

With water availability being one of the world’s major challenges, this study aims to propose a Zero Liquid Discharge (ZLD) system for treating saline effluents from an urban wastewater treatment plant (UWWTP), thereby supplementing into the existing water cycle. The system, which employs membrane (nanofiltration and reverse osmosis) and thermal technologies (multi-effect distillation evaporator and vacuum crystallizer), has been installed and operated in Cyprus at Larnaca’s WWTP, for the desalination of the tertiary treated water, producing high-quality reclaimed water. The nanofiltration (NF) unit at the plant operated with an inflow concentration ranging from 2500 to 3000 ppm. The performance of the installed NF90-4040 membranes was evaluated based on permeability and flux. Among two NF operation series, the second—operating at 75–85% recovery and 2500 mg/L TDS—showed improved membrane performance, with stable permeability (7.32 × 10⁻¹⁰ to 7.77 × 10⁻¹⁰ m·s⁻¹·Pa⁻¹) and flux (6.34 × 10⁻⁴ to 6.67 × 10⁻⁴ m/s). The optimal NF operating rate was 75% recovery, which achieved high divalent ion rejection (more than 99.5%). The reverse osmosis (RO) unit operated in a two-pass configuration, achieving water recoveries of 90–94% in the first pass and 76–84% in the second. This setup resulted in high rejection rates of approximately 99.99% for all major ions (Cl⁻, Na⁺, Ca²⁺, and Mg²⁺), reducing the permeate total dissolved solids (TDS) to below 35 mg/L. The installed multi-effect distillation (MED) unit operated under vacuum and under various inflow and steady-state conditions, achieving over 60% water recovery and producing high-quality distillate water (TDS < 12 mg/L). The vacuum crystallizer (VC) further concentrated the MED concentrate stream (MEDC) and the NF concentrate stream (NFC) flows, resulting in distilled water and recovered salts. The MEDC process produced salts with a purity of up to 81% NaCl., while the NFC stream produced mixed salts containing approximately 46% calcium salts (mainly as sulfates and chlorides), 13% magnesium salts (mainly as sulfates and chlorides), and 38% sodium salts. Overall, the ZLD system consumed 12 kWh/m³, with thermal units accounting for around 86% of this usage. The RO unit proved to be the most energy-efficient component, contributing 71% of the total water recovery. Full article

This study presents a one-step electrospinning method to fabricate polyacrylonitrile (PAN) nanofibers embedded with green-synthesized silver nanoparticles (AgNPs) for efficient catalytic dye reduction and real-time monitoring. Utilizing avocado seed extract for AgNP synthesis, the resulting composite nanofibers exhibit uniform nanoparticle dispersion and enhanced surface area, significantly improving adsorption and catalytic properties. The membranes demonstrated outstanding catalytic activity, achieving over 95% degradation of methyl orange within 45 min when paired with sodium borohydride, and maintained structural integrity and performance over ten reuse cycles. The integration of a novel 3D-printed support enabled scalability, allowing a 60-fold increase in treatment volume without compromising efficiency. Additionally, the composite’s electrical conductivity changes enabled the real-time monitoring of the dye reduction process, highlighting its dual functionality as both catalyst and sensor. These results encourage the potential of PAN/AgNPs supported on a 3D-printed structure nanofiber membranes for scalable, sustainable wastewater treatment and in situ reaction monitoring. Full article

An integrated process scheme is developed for valorizing filtered liquid digestates (FLD) from an industrial anaerobic digestion (AD) plant treating dairy-processing effluents with relatively low nutrient concentrations. The process scheme involves FLD treatment by nanofiltration (NF) membranes, followed by struvite recovery from the NF-retentate. An NF pilot unit (designed for this purpose) is combined with a state-of-the-art NF/RO process simulator. Validation of simulator results with pilot data enables reliable predictions required for scaling up NF systems. The NF permeate meets the standards for restricted irrigation and/or reuse. Considering the significant nutrient concentrations in the NF retentate (i.e., ~500 mg/L NH4-N, ~230 mg/L PO4-P), struvite recovery/precipitation is investigated, including determination of near-optimal processing conditions. Maximum removal of nutrients, through production of struvite-rich precipitate, is obtained at a molar ratio of NH₄:Mg:PO₄ = 1:1.5:1.5 and pH = 10 in the treated stream, attained through the addition of Κ₂HPO₄, ΜgCl₂·6H₂O, and NaOH. Furthermore, almost complete struvite precipitation is achieved within ~30 min, whereas precipitate/solid drying at modest/ambient temperature is appropriate to avoid struvite degradation. Under the aforementioned conditions, a significant amount of dry precipitate is obtained, i.e., ~12 g dry mass per L of treated retentate, including crystalline struvite. The approach taken and the obtained positive results provide a firm basis for further development of this integrated process scheme towards sustainable large-scale applications. Full article

Nejayote (Nej), an effluent from nixtamalization process, has an alkaline pH and contains a high load of organic matter in suspension and dissolution, which makes it a highly polluting waste when discharged directly into the environment. However, the sustainable reuse of this effluent is relevant since it contains high-value compounds (ferulic acid (FA)) with appropriate activity for the ecological synthesis of silver nanoparticles (AgNPs). This study explores the synthesis of AgNPs using Nej as a reducing and stabilizing agent and evaluates the antibacterial effectiveness of AgNPs against Escherichia coli (E. coli). The AgNPs under study possess excellent optical (UV-Vis) and structural properties (XRD). HR-TEM images show predominantly spherical particles, with an average size of 20 nm. FTIR spectroscopy identified functional groups, including phenols and flavonoids, on the nanoparticle surface, acting as stabilizing agents. HPLC supports the existence of FA in the AgNPs. Biogenic AgNPs exhibit enhanced antibacterial activity due to the adsorption of these functional groups onto their surface, which contributes to bacterial membrane disruption. Finally, no hemolytic or cytotoxic activity was observed, suggesting that the AgNPs exert antimicrobial activity without potentially harmful doses (biocompatibility). The study highlights the potential of Nej as a sustainable source for use in nanoparticle synthesis, promoting the recycling of agro-industrial waste and the production of materials with technological applications. Full article