Search Results (15)

Class III malocclusion prevalence varies significantly among racial groups, with the highest prevalence observed in southeast Asian populations at 15.80%. These malocclusions often involve maxillary retrognathism, mandibular prognathism, or both, accompanied by maxillary constriction and crossbites. Comprehensive treatment should address anteroposterior, transverse, and vertical imbalances. Microimplant-assisted rapid palatal expansion (MARPE) has shown high success rates for transverse maxillary expansion in late adolescents and adults, presenting a viable alternative to surgically-assisted rapid palatal expansion (SARPE). This case report aims to demonstrate the successful treatment of a young adult female with borderline Class III malocclusion using MARPE and mandibular backward rotation (MBR) techniques. A 21-year-old female presented with a Class III skeletal pattern, anterior/posterior crossbites, and mild dental crowding. Despite her concerns about a concave facial profile, the patient declined orthognathic surgery due to a negative experience reported by a friend. The treatment plan included MARPE to correct maxillary transverse deficiency and MBR to alleviate Class III malocclusion severity. Lower arch distalization was performed using temporary anchorage devices (TADs) on the buccal shelves, and Class II elastics were used to maintain MBR and prevent retroclination of the lower labial segment during anterior retraction. Significant transverse correction was achieved, and the severity of Class III malocclusion was reduced. The lower dentition was effectively retracted, and the application of Class II elastics helped maintain MBR. The patient’s final facial profile was harmonious, with well-aligned dentition and a stable occlusal relationship. The treatment results were well-maintained after one year. The MARPE with MBR approach presents a promising alternative for treating borderline Class III cases, particularly for patients reluctant to undergo orthognathic surgery. This case report highlights the effectiveness of combining MARPE and MBR techniques in achieving stable and satisfactory outcomes in the treatment of Class III malocclusion. Full article

This study investigated compensation in skeletal Class III subjects to compare various severities of abnormal jaws. A retrospective analysis of 137 skeletal Class III cephalograms (63 males and 74 females) was conducted, with cephalometric assessments determining skeletal and dental values. The results were compared with Class I cephalograms. Incisor compensation was examined by pairing normal jaws with varied abnormal jaws, classified by severity using one standard deviation (SD). Statistical analyses included Kruskal–Wallis tests, Bonferroni tests, Spearman’s correlations, and multiple linear regression. Four skeletal Class III groups were identified: OMx+PMd, RMx+OMd, OMx+OMd, and PMx+PMd (P = prognathic; O = orthognathic; R = retrognathic; Mx = maxilla; Md = mandible.). The upper central incisor (U1) showed proclination, and the lower central incisor (L1) showed retroclination across all groups except for U1 in PMx+PMd and L1 in OMx+OMd, which exhibited normal inclination. U1 exhibited limited compensation even with progressive maxillary retrognathism, while L1 showed limited compensation after one SD of mandibular prognathism. Maxilla (SNA) and jaw discrepancy (ANB) were inversely related to the U1 degree, whereas only jaw discrepancy (ANB) was positively related to the L1 degree. U1 in PMx+PMd and L1 in OMx+OMd showed no incisor compensation. U1 had limited compensation even with progressive maxillary retrognathism while L1 showed limited compensation after one SD mandibular prognathism. Full article

Mandibular retrognathism occurs by insufficient mandibular growth and causes several issues, such as respiratory difficulty and diminished masticatory function. At present, functional orthodontic appliances are used for stimulating mandibular growth in pediatric cases. However, the effectiveness of functional appliances is not always stable in daily practices. A more effective, reliable, and safer therapeutic method for mandibular growth promotion would be helpful for growing mandibular retrognathism patients. As we previously discovered that nutritional supplementation of myo-inositol in growing mice specifically increases mandibular endochondral growth, we performed preclinical animal experiments in rabbits in this study. Briefly, six-week-old male Japanese white rabbits were fed with or without myo-inositol supplementation in laboratory chow until 25 weeks old, and 3D image analysis using micro CT data and histological examinations was done. Myo-inositol had no systemic effect, such as femur length, though myo-inositol specifically augmented the mandibular growth. Myo-inositol increased the thickness of mandibular condylar cartilage. We discovered that the nutritional supplementation of myo-inositol during the growth period specifically augmented mandibular growth without any systemic influence, even in rabbits. Our results suggest the possibility of clinical use of myo-inositol for augmentation of the mandibular growth in growing mandibular retrognathism patients in the future. Full article

Orthognathic surgery is indicated to modify the position of the maxillomandibular structure; changes in the mandibular position after osteotomy can be related to changes in the position of the mandibular condyle in the articular fossa. The aim of this study was to determine changes produced in the mandibular condyle 6 months after orthognathic surgery. A cross-sectional study was conducted that included subjects who had undergone bimaxillary orthognathic surgery to treat dentofacial deformity of Angle class II (group CII) or Angle class III (group CIII). Standardized images were taken using cone-beam computed tomography 21 days before surgery and 6 months after surgery; measurement scales were used to identify the condylar position and its relations with the anterior, superior, and posterior joint spaces. The results were analyzed using the Shapiro–Wilk and Student’s t-tests, while considering a value of p < 0.05 as indicating a significant difference. Fifty-two joints from 26 patients, with an average age of 27.9 years (±10.81), were analyzed. All subjects in both group CII and group CIII showed a significant change in the anterior, superior, and posterior joint spaces. However, postoperative changes in the position of the condyle in the articular fossa were not significant in the anteroposterior analysis. We conclude that orthognathic surgery causes changes in the sagittal position of the mandibular condyle in subjects with mandibular retrognathism and prognathism. Full article

Background: In this study, wistar rats were used to examine the impact of diet consistency on maxillary and mandibular growth over three generations. Methods: In this investigation, a breeding sample of 60 female and 8 male wistar rats was used. Measuring was only performed on female animals. The first generation’s primary breeding sample consisted of 20 female wistar rats that were 30 days old and 4 male rats that were also 30 days old; two subsequent generations were created from these animals. At the age of 100 days, CBCTs were collected of all male rats. Twenty-eight craniofacial landmarks were selected for the linear measurements on stl format extracted from the DICOM files. A Bonferroni test was performed for the statistical analysis. Results: Means of measurements of all soft diet groups compared to corresponding measurements of the hard diet groups were significantly different. According to linear measurements, there was statistical difference on the maxillary measurements between the soft diet groups of the first and third generation, while the rest did not appear to have any statistical difference. There was significant difference for the mandibular dimensions only when the first generation soft diet group was compared with the third generation soft diet group. Conclusions: Food consistency has a significant impact on the growth and development of the maxilla and mandible. Soft diet habits may result in retrognathic mandible, and narrower maxilla. Full article

Background: Individuals with amelogenesis imperfecta (AI) often present with malocclusions, especially a dental or skeletal anterior open bite (AOB). Objectives: To evaluate the craniofacial characteristics in individuals with AI. Material and methods: A systematic literature search was conducted with the PubMed, Web of Science, Embase and Google Scholar databases to identify studies relating to the cephalometric characteristics of individuals with AI, without any language or publication date restrictions. The grey literature was searched using Google Scholar, Opengrey and Worldcat. Only studies with a suitable control group for comparison were included. Data extraction and a risk of bias assessment were carried out. A meta-analysis was performed using the random effects model for cephalometric variables that were evaluated in at least three studies. Results: The initial literature search yielded 1857 articles. Following the removal of duplicates and a screening of the records, seven articles were included in the qualitative synthesis, representing a total of 242 individuals with AI. Four studies were included in the quantitative synthesis. The meta-analysis results showed that individuals with AI present a smaller SNB angle and larger ANB angle than those of control groups in the sagittal plane. In the vertical plane, those with AI present a smaller overbite and larger intermaxillary angle than those without AI. No statistically significant differences were found for the SNA angle when comparing the two groups. Conclusions: Individuals with AI seem to present with more vertical craniofacial growth, leading to an increased intermaxillary angle and decreased overbite. This possibly leads to a more retrognathic mandible with a larger ANB angle due to an anticipated posterior mandibular rotation. Full article

Scissor bite (SB.) is a rare malocclusion that is challenging to diagnose and is often associated with a retrognathic mandible and a series of functional and structural abnormalities that negatively affect the patient. This article intends to analyze the treatment approaches applied to growing patients younger than 16 years old, comparing the conventional appliances described in the literature and a clinical case treated with clear aligners with mandibular advancement (MA.). SB is primarily related to skeletal Class I and II, according to Angle classification. In the various cases analyzed, it can also be mentioned as a significant number of cases with SB of dental origin (seven of dental and four of skeletal) in young patients. In children and adolescents who still have growth potential, the therapeutic possibilities are numerous. A comprehensive literature search was manually performed from 2002 until January 2023, in PubMed and BVS databases with the following conjugated keywords: “scissor bite OR brodie bite” AND “malocclusion” AND “treatment OR correction OR therapeutics”. The present case report on a young patient demonstrated the efficiency of the clear aligners with MA to correct an SB, associated with several functional and structural anomalies such as Class II division 1 with an increased overjet and overbite as well as a severe curve of Spee in a hypodivergent biotype. Full article

Objective: The purpose of our research is to compare the post-surgical position of the temporomandibular joint in skeletal Class III patients and patients with cleft lip and palate treated with two-jaw orthognathic surgery using a three-dimensional computer tomography image. Materials and Methods: Twenty-three skeletal Class III patients with mandibular prognathism associated with maxillary retrognathism in group 1 and twenty cleft mid-face retrusion skeletal Class III patients in group 2 were enrolled in this study. All subjects were treated with two-jaw orthognathic surgery. Computed tomography scans were taken in all subjects at 3 weeks preoperatively and 6 months postoperatively. Three-dimensional craniofacial skeletal structures were build-up, and assessed the temporomandibular joint position changes before and after surgery. Results: Forty-three selected patients were separated into two groups. The mean age of patients was 22.39 ± 4.8 years in group 1 and 20.25 ± 3.8 years in group 2. The range of mean three-dimensional discrepancy of the selected condylar points was 0.95–1.23 mm in group 1 and 2.37–2.86 mm in group 2. The mean alteration of intercondylar angle was 2.33 ± 1.34° in group 1 and 6.30 ± 2.22° in group 2. The significant differences in the discrepancy of TMJ and changes in intercondylar angle were confirmed within the intra-group and between the two groups. Conclusions: Significant changes in postoperative TMJ position were present in both groups. Furthermore, the cleft group presented significantly more postoperative discrepancy of TMJ and more changes in intercondylar angle after surgery. This finding may be a reason leading to greater postoperative instability in cleft patients compared with skeletal Class III non-cleft patients. Clinical Trial Registration Number: IRB No: 202201108B0. Full article

Skeletal class II and III malocclusions are craniofacial disorders that negatively impact people’s quality of life worldwide. Unfortunately, the growth patterns of skeletal malocclusions and their clinical correction prognoses are difficult to predict largely due to lack of knowledge of their precise etiology. Inspired by the strong inheritance pattern of a specific type of skeletal malocclusion, previous genome-wide association studies (GWAS) were reanalyzed, resulting in the identification of 19 skeletal class II malocclusion-associated and 53 skeletal class III malocclusion-associated genes. Functional enrichment of these genes created a signal pathway atlas in which most of the genes were associated with bone and cartilage growth and development, as expected, while some were characterized by functions related to skeletal muscle maturation and construction. Interestingly, several genes and enriched pathways are involved in both skeletal class II and III malocclusions, indicating the key regulatory effects of these genes and pathways in craniofacial development. There is no doubt that further investigation is necessary to validate these recognized genes’ and pathways’ specific function(s) related to maxillary and mandibular development. In summary, this systematic review provides initial insight on developing novel gene-based treatment strategies for skeletal malocclusions and paves the path for precision medicine where dental care providers can make an accurate prediction of the craniofacial growth of an individual patient based on his/her genetic profile. Full article

One of the goals of functional-appliance devices is to modify the vertical growth pattern, solving several kinds of malocclusion. This study aimed to evaluate Class II malocclusion treatment’s stability with Austro Repositioner, followed by fixed appliances, and assess its capacity to modify vertical dimensions in brachyfacial patients. A test group of 30 patients (16 boys and 14 girls, mean 11.9 years old) with Class II malocclusion due to mandibular retrognathism and brachyfacial pattern treated with Austro Repositioner and fixed appliance were compared to a matched untreated Class II control group of 30 patients (17 boys and 13 girls, mean age 11.7 years old). Lateral cephalograms were taken at T1 (initial records), T2 (end of treatment), and T3 (one year after treatment). Statistical comparisons were performed with a paired-sample t-test and two-sample t-tests. Significant improvements in the skeletal Class II relationship were observed in the treated group. The ANB angle decreased (4.75°), the SNB angle increased (3.92°), and the total mandibular length (Co-Pg) increased (8.18 mm) (p < 0.001). Vertical dimensions were also significantly modified, the FMA angle increased (3.94°), LAFH-distance increased (3.15 mm), and overbite decreased (3.35 mm). These changes remained stable one year after treatment. The Austro Repositioner was adequate for treating the skeletal Class II malocclusion resulting from the mandible retrusion in brachyfacial patients. Full article

In this study we evaluated whether single nucleotide polymorphisms (SNPs) in the genes encoding PTH, VDR, CYP24A1, and CYP27B1 were associated with mandibular retrognathism (MR). Samples from biologically-unrelated Brazilian patients receiving orthodontic treatment were included in this study. Pre-orthodontic lateral cephalograms were used to determine the phenotype. Patients with a retrognathic mandible were selected as cases and those with an orthognathic mandible were selected as controls. Genomic DNA was used for genotyping analysis of SNPs in PTH (rs694, rs6256, and rs307247), VDR (rs7975232), CYP24A1 (rs464653), and CYP27B1 (rs927650). Chi-squared or Fisher’s tests were used to compare genotype and allele distribution among groups. Haplotype analysis was performed for the SNPs in PTH. The established alpha was p < 0.05. Multifactor dimensionality reduction (MDR) was used to identify SNP–SNP interactions. A total of 48 (22 males and 26 females) MR and 43 (17 males and 26 females) controls were included. The linear mandibular and the angular measurements were statistically different between MR and controls (p < 0.05). In the genotype and allele distribution analysis, the SNPs rs694, rs307247, and rs464653 were associated with MR (p < 0.05). MDR analyses predicted the best interaction model for MR was rs694–rs927650, followed by rs307247–rs464653–rs927650. Some haplotypes in the PTH gene presented statistical significance. Our results suggest that SNPs in PTH, VDR, CYP24A1, and CYP27B1 genes are associated with the presence of mandibular retrognathism. Full article

Background: Dental Class II is the most common indication for combined orthodontic-orthognathic treatment. Intermolar mandibular distraction osteogenesis (IMDO) treatment was performed during the growth spurt, to avoid surgery at a later age. The aim of this study is to present our first experience with IMDO. Methods: This is a retrospective case series of patients who underwent an IMDO. All patients showed mandibular retrognathism, and orthodontic treatment with functional appliances was not successful. Results: In total, 20 patients (mean age of 14.8 years (SD = 0.9 ys) were included. All patients achieved a Class I occlusion. An average length gain of 9.6 mm (SD = 3.7 mm) was reached. In one patient an abscess occurred. Nine patients presented with root fractures of the second molar; three were lost, one treated endodontically. The average time between insertion and removal of the distractors was 4.6 months (SD = 1.5 mths). In one case a premature consolidation was seen. Conclusion: We achieved satisfactory results with IMDO, although undesirable effects occurred. An advantage is the manageable overall treatment time. Open questions concern the occurrence of root fractures. Furthermore, the question of long-term stability is open. The question of dynamic distraction treatment in relation to temporomandibular joint changes can only be answered in the long term. Full article

Aim of this systematic review was to assess the effects of orthopedic treatment for Class II malocclusion with Functional Appliances (FAs) on the dimensions of the upper airways. Eight databases were searched up to October 2020 for randomized or nonrandomized clinical studies on FA treatment of Class II patients with untreated control groups. After duplicate study selection, data extraction, and risk of bias assessment according to Cochrane guidelines, random effects meta-analyses of mean differences (MDs) and their 95% confidence intervals (CIs) were performed, followed by subgroup/meta-regression analyses and assessment of the quality of evidence. A total of 20 nonrandomized clinical studies (4 prospective/16 retrospective) including 969 patients (47.9% male; mean age 10.9 years) were identified. Orthopedic treatment with FAs was associated with increased oropharynx volume (MD = 2356.14 mm³; 95% CI = 1276.36 to 3435.92 mm³; p < 0.001) compared to natural growth. Additionally, significant increases in nasopharynx volume, minimal constricted axial area of pharyngeal airway, and airway were seen, while removable FAs showed considerably greater effects than fixed FAs (p = 0.04). Finally, patient age and treatment duration had a significant influence in the effect of FAs on airways, as had baseline matching and sample size adequacy. Clinical evidence on orthopedic Class II treatment with FAs is associated with increased upper airway dimensions. However, the quality of evidence is very low due to methodological issues of existing studies, while the clinical relevance of increases in airway dimensions remains unclear. Full article

This study presents a novel technique utilizing high-frequency vibration to shorten treatment time and preserve alveolar bone in challenging orthodontic cases that have been treated with Invisalign^® clear aligners. Four non-growing orthodontic patients (age range 14–47 years old) with Class II skeletal patterns (convex profiles with retrognathic mandibles) who sought correction of their crowded teeth and non-surgical correction of their convex profiles were included in this study. These patients were treated using Invisalign clear aligners together with high-frequency vibration (HFV) devices (120 Hz) (VPro5™) that were used by all patients for five minutes per day during active orthodontic treatment. Vertical control and forward rotation of the mandible for each patient was achieved through pre-programming the Invisalign to produce posterior teeth intrusion. Successful forward rotation of the mandibles achieved in all patients led to improvement of their facial convex profiles (apical base relationship (ANB) improved 2.1 ± 0.5 degrees; FMA (Frankfurt mandibular plane angle) improved 1.2 + 1.1 degrees). Dental decompensation was achieved by lingual tipping of the lower incisors and palatal root torque of upper incisors. The use of HFV together with Invisalign facilitated achieving these results within a 12 ± 6 months period. In addition, more bone labial to the lower incisors after their lingual movement was noted. In conclusion, the use of HFV concurrent with SmartTrack Invisalign aligners allowed complex tooth movement and forward mandibular projection without surgery in non-growing patients with skeletal Class II relationships. The clinical impact and implications of this case series are: (1) the use of HFV facilitates complex orthodontic tooth movement including posterior teeth intrusion and incisor decompensation; (2) forward mandibular projection of the mandible and increased bone formation labial to lower incisors can be achieved in non-growing patients that may minimize the need for surgical intervention in similar cases or gum recession due to lower incisors labial inclination. Full article

The review aims to collect and demonstrate recent knowledge about craniofacial morphology in growth hormone (GH)-deficient children and children with Turner syndrome. The review describes also the effects of growth hormone treatment on craniofacial morphology of children with growth hormone deficiency and Turner syndrome. Regardless of the disorder it accompanies, short stature is associated with similar craniofacial features characteristic of all short-statured children. Characteristic craniofacial features involve lesser dimensions of the cranial base and mandibular length, proportionately smaller posterior than anterior facial height, retrognathic face, and posterior rotation of the mandible. We also analyze orthodontic treatment in children affected by disorders associated with GH deficiency or provided with growth hormone treatment in the aspect of craniofacial growth. Recent publications show also the connection between growth hormone receptor polymorphism and craniofacial growth. Specialists and orthodontists treating short-statured children must be aware of the results of studies on craniofacial morphology and educate themselves on the topic of craniofacial growth in children with short stature. Moreover, knowledge of the influence of GH therapy on growth of craniofacial structures is necessary to decide the proper timing and planning of orthodontic treatment. Full article