Search Results (28)

Antrodia cinnamomea (A. cinnamomea), a medicinal and edible mushroom endemic to Taiwan, has been traditionally valued as a health tonic. Recent studies have highlighted the diverse specialized metabolites and bioactive potential of this substance, primarily attributed to key secondary metabolites such as benzenoids, maleic and succinic acids, ubiquinone, triterpenoids, and the primary metabolite polysaccharides. These compounds exhibit a broad spectrum of pharmacological properties, including those related to antibacterial, antitumor, anti-inflammation, hepatoprotection, hypoglycaemia, and antioxidant activities, and immunomodulation and gut microbiota regulation. These findings highlight the therapeutic potential of A. cinnamomea and its potential applications in health supplements and functional foods. This review evaluated recent advancements in the cultivation, extraction, and characterization of bioactive compounds from A. cinnamomea, with a particular focus on submerged and solid-state fermentation methods. We hope to provide a comprehensive framework for promoting the efficient and scientific evidence based utilization of A. cinnamomea in novel therapeutic strategies and health-related innovations. Full article

The development of effective photocatalysts for environmental applications is still a critical aspect of green chemistry. This study explores copper oxide (Cu_xO) catalysts supported on titanium dioxide (TiO₂) and zinc oxide (ZnO) for the photocatalytic reduction of maleic acid to succinic acid under ultraviolet (UV) light in water. The main goal was to evaluate the performance of CuO/ZnO compared to CuO/TiO₂ in photoreduction. In order to improve the efficiency of the first catalyst, an environmentally friendly synthesis, assisted by polydopamine (PDA), was tested, obtaining the Cu₂O/ZnO-PDA catalyst. The results showed that CuO/TiO₂ exhibited the highest activity for maleic acid reduction, obtaining a succinic acid yield and a selectivity of 32% after 24 h of reaction time, but comparable results could be reached even with Cu₂O/ZnO-PDA increasing the reaction time. Furthermore, the addition of sodium ascorbate as a co-catalyst in the reaction mixture allowed us to overtake the previous results, leading to a succinic acid yield of 61% and a selectivity of 67%. These findings suggest that the PDA shell can be a solution for Cu_xO photodegradation, making Cu₂O/ZnO-PDA an alternative to the toxic CuO/TiO₂. Full article

Succination is a non-enzymatic post-translational modification of cysteine (Cys) residues, resulting in the formation of S-(2-succino)cysteine (2SC). While hundreds of 2SC-modified proteins have been identified and are associated with the dysfunction of proteins, the underlying molecular mechanisms remain poorly understood. Conventional methods for synthesizing succinated compounds, such as 2SC, often require prolonged reaction times and/or HCl hydrolysis. In this study, we present a rapid and efficient synthesis method for succinated compounds using maleic anhydride, enabling more effective in vivo studies of succination mechanisms. This method was tested on thiol compounds with varying molecular weights, including Cys derivatives, Cys-containing peptides, and reduced bovine serum albumin. By incubating these compounds in an aqueous buffer with maleic anhydride dissolved in an organic solvent like diethyl ether, we achieved significantly improved succination efficiency compared to conventional methods. The succination efficiency using maleic anhydride surpassed that of fumaric acid or maleic acid. Notably, this approach facilitated the succination of amino acids, peptides, and proteins within minutes at 25 °C, without requiring acid hydrolysis. Our findings provide a straightforward, time-efficient strategy for synthesizing succinated thiol compounds, offering a valuable tool to enhance the understanding of succination’s molecular mechanisms and its role in protein function and dysfunction. Full article

Background/Objectives: Clofazimine (CFZ) is a Biopharmaceutics Classification System (BCS) II drug introduced in the US market in 1986 for the treatment of leprosy. However, CFZ was later withdrawn from the market due to its extremely low aqueous solubility and low absorption. In the literature, the intrinsic solubility of CFZ has been estimated to be <0.01 μg/mL, and solubilities of its different salt forms in simulated gastric and intestinal fluids are <10 µg/mL. These are extremely low solubilities for the dissolution of a drug administered orally at 100–200 mg doses. Methods: In the present investigation, seven weak organic acids (adipic, citric, glutaric, maleic, malic, succinic, and tartaric) were tested by determining the aqueous solubility of CFZ as the function of acid concentration to investigate whether any of the acids would lead to the supersolubilization of CFZ. Results: There were only minimal increases in solubilities when concentrations of acids in water were increased up to 2.4 M. The solubilities, however, increased to 0.32, 1.23, and 10.68 mg/mL, respectively, in 5 M solutions of tartaric, malic, and glutaric acids after equilibration for 24 h at 25 °C. Crystalline solids were formed after the equilibration of CFZ with all acids. Apparently, salts or cocrystals were formed with all acids, except for glutaric acid, as their melting endotherms in DSC scans were in the range of 207.6 to 248.5 °C, which were close to that of CFZ itself (224.8 °C). In contrast, the adduct formed with glutaric acid melted at the low temperature of 77 °C, and no other peak was observed at a higher temperature, indicating that the material converted to an amorphous state. Conclusions: The increase in CFZ solubility to >10 mg/mL in the presence of 5 M glutaric acid could be called supersolubilization when compared to the intrinsic solubility of the basic drug. Such an increase in CFZ solubility and the conversion of the glutarate adduct to an amorphous state are being exploited to develop rapidly dissolving dosage forms. Full article

(Triphenylphosphoranylidene)succinic anhydride, which is prepared from triphenylphosphine and maleic anhydride and is itself not reactive towards aryl aldehydes, is ring-opened with methanol to methyl (triphenylphosphoranylidene)succinate. In one pot, the newly formed phosphorane is reacted with aryl aldehydes to methyl aryl itaconates, which are subsequently hydrolyzed with aqueous sodium hydroxide to aryl itaconic acids. The biological activity of 12 aryl itaconic acids thus prepared against four gram-positive and four gram-negative bacterial strains has been studied. Full article

The reaction of wood with maleic anhydride (MA) and sodium hypophosphite (SHP) has been identified as a viable modification method, with macroscopical properties indicating formation of cross-linking to explain the results. However, the chemical reaction between wood and the modification reagents has not been studied yet. To resolve this, the reaction was studied with solid-state ¹³C cross-polarization magic-angle-spinning (CP-MAS) and ³¹P MAS nuclear magnetic resonance (NMR) and X-ray photoelectron spectroscopy (XPS) to reveal the formation of bonds between wood components, MA and SHP during the treatments to explain the formation of cross-linking and the possible fixation of phosphorus in wood. XPS, solid state ¹³C and ³¹P MAS NMR revealed the maleation of wood in the absence of SHP, whilst its presence led to forming a succinic adduct observed through the C-P bond formation, as evidenced by the loss of the maleate C=C bonds at around 130 ppm and the upfield shift of the peak at 165–175 ppm, which was also significantly smoothed, as well as the increase in a peak at 26 ppm due to the reaction between the maleate group and SHP; however, the C-P-C bond could not be unambiguously rationalized from the obtained data. On the other hand, a resonance line at 16 ppm in ³¹P MAS NMR and the peaks in the XPS P 2p spectrum suggested the formation of a cross-linked structure at low concentrations of SHP, which was more likely to be phosphonate (C-P-O) than organophosphinic acid (C-P-C). The results herein provide a greater fundamental understanding of the mechanisms involved in the reaction of wood, MA and SHP, providing further scope for improved treatment systems in the future. Full article

Environmental contamination with xenobiotics affects organisms and the symbiotic relations between them. A convenient object to study relationships between parasites and their hosts is the host–parasite system “Tenebrio molitor Linnaeus, 1758 (Coleoptera, Tenebrionidae)—Gregarina polymorpha (Hammerschmidt, 1838) Stein, 1848 (Eugregarinorida, Gregarinidae)”. For this experiment, we took 390 T. molitor larvae and 24 organic compounds. Groups of mealworms, 15 in each, were subjected to those compounds for 10 days. Then, we recorded the vitality of both the larvae of T. molitor and G. polymorpha. To assess how G. polymorpha had affected the hosts’ wellbeing, we looked for changes in the larvae’s body mass and compared them to the number of gregarines in their intestines. The vitality of the larvae was inhibited by cyclopentanol and 2-naphthol. The intensity of gregarine invasion was reduced by diphenyl ether, benzyl alcohol, catechol, and 3-aminobenzoic acid. No effect on the number of gregarines was produced by 3,4,5-trihydroxybenzoic acid, cyclohexanemethanol, phenol, benzalkonium chloride, maleic anhydride, cyclohexanol, resorcin, benzoic acid, 2-methylfuran, terpinen-4-ol, 1-phenylethylamine, dibutyl phthalate, 3-furancarboxylic acid, 5-methyl furfural, 6-aminohexanoic acid, succinic anhydride, o-xylene, and benzaldehyde. In the infected T. molitor individuals, the mean number of G. polymorpha equaled 45 specimens per host. The groups of smaller mealworms had fewer gregarines. Positive correlation was seen between growth rates of T. molitor larvae and the intensity of invasion by gregarines. Full article

The synthesis of novel heterocyclic compounds is achieved through a multi-step process involving azo dye (S1), ester (S2), and hydrazide (S3). Initially, azo dye (S1) is synthesized through the reaction between resorcinol and p-aminobenzoic acid. Subsequently, ester (S2) is formed by reacting azo dye (S1) with concentrated sulfuric acid. Hydrazide (S3) is then synthesized by reacting ester (S2) with 80% hydrazine hydrate. Further reactions of hydrazide (S3) with various anhydrides (maleic anhydride, phthalic anhydride, 3-nitrophthalic anhydride, and succinic anhydride) result in cyclization facilitated by acetic acid, yielding six-membered heterocyclic compounds. Additionally, compound S3 undergoes cyclization with acetyl acetone, ethyl acetoacetate, methyl acetoacetate, and diethyl malonate to produce five-membered heterocyclic compounds. The biological activity of these synthesized compounds is also investigated. Characterization of the prepared compounds is performed using techniques such as Fourier-Transform Infrared Spectroscopy (FT-IR), Proton Nuclear Magnetic Resonance (${}^1$HNMR), Carbon-13 Nuclear Magnetic Resonance (${}^{13}$C-NMR), and Elemental Analysis (CHNS). Full article

Poly(butylene succinate-butylene terephthalate) (PBST) and polylactic acid (PLA) are both biodegradable polymeric materials. PBST has good ductility but low strength, while PLA exhibits high strength but poor toughness. Based on the complementary mechanical properties of the two polymers, PBST/PLA blends were prepared by melt blending in the mixing chamber of a torque rheometer using styrene-maleic anhydride copolymer (PSMA) as a compatibilizer. The effects of different contents of PSMA on the crystalline properties, thermal properties, mechanical properties, rheological behavior, and morphology of PBST/PLA blends were investigated. The results showed that the addition of PSMA improved the compatibility between PBST and PLA. When the amount of PSMA is 3–4 wt%, the comprehensive mechanical properties of the blends are optimal, and the tensile strength was increased by 61.7% compared with the binary blend without PSMA. Additionally, rheological tests illustrated that the blends exhibited a typical shear-thinning behavior and belonged to pseudoplastic non-Newtonian fluids. Full article

Many chemically synthesized xenobiotics can significantly inhibit the vitality of parasitic nematodes. However, there is yet too little research on the toxicity of such contaminating compounds toward nematodes. Compounds that are present in plants are able to inhibit the vitality of parasitic organisms as well. According to the results of our laboratory studies of toxicity, the following xenobiotics caused no decrease in the vitality of the larvae of Strongyloides papillosus and Haemonchus contortus: methanol, propan-2-ol, propylene glycol-1,2, octadecanol-1, 4-methyl-2-pen-tanol, 2-ethoxyethanol, butyl glycol, 2-pentanone, cyclopentanol, ortho-dimethylbenzene, dibutyl phthalate, succinic anhydride, 2-methylfuran, 2-methyl-5-nitroimidazole. Strong toxicity towards the nematode larvae was exerted by glutaraldehyde, 1,4-diethyl 2-methyl-3-oxobutanedioate, hexylamine, diethyl malonate, allyl acetoacetate, tert butyl carboxylic acid, butyl acrylate, 3-methyl-2-butanone, isobutyraldehyde, methyl acetoacetate, ethyl acetoacetate, ethyl pyruvate, 3-methylbutanal, cyclohexanol, cyclooctanone, phenol, pyrocatechin, resorcinol, naphthol-2, phenyl ether, piperonyl alcohol, 3-furoic acid, maleic anhydrid, 5-methylfurfural, thioacetic acid, butan-1-amine, dimethylformamide, 1-phenylethan-1-amine, 3-aminobenzoic acid. Widespread natural compounds (phytol, 3-hydroxy-2-butanone, maleic acid, oleic acid, hydroquinone, gallic acid-1-hydrate, taurine, 6-aminocaproic acid, glutamic acid, carnitine, ornithine monohydrochloride) had no negative effect on the larvae of S. papillosus and H. contortus. A powerful decrease in the vitality of nematode larvae was produced by 3,7-dimethyl-6-octenoic acid, isovaleric acid, glycolic acid, 2-oxopentanedioic acid, 2-methylbutanoic acid, anisole, 4-hydroxy-3-methoxybenzyl alcohol, furfuryl alcohol. The results of our studies allow us to consider 28 of the 62 compounds we studied as promising for further research on anti-nematode activity in manufacturing conditions. Full article

Amaranth is used as a spinach replacement; therefore, it is sometimes called Chinese Spinach. So far, the activity of the plant has not been associated with the presence of specific compounds. Three cultivars of Amaranthus tricolor L. were investigated for their antioxidant and antimicrobial activities. The correlation between the bioactivity and metabolite profiles was investigated in order to indicate active compounds in A. tricolor. The phytochemical profile of a total of nine extracts was studied by HPLC-DAD-ESI/HRMS, revealing the presence of 52 compounds. The highest antioxidant activity was noticed in the Red cultivar (0.06 mmol TE/g DE (Trolox Equivalent/Dry Extract Weight) and was related to the presence of amino acids, flavonoids and phenolic acids, as well as individual compounds such as tuberonic acid hexoside. All studied extracts revealed antimicrobial activity. Gram-positive bacteria were more susceptible to N-(carboxyacetyl) phenylalanine, phenylalanine, tuberonic acid and succinic acid and Gram-negative bacteria to dopa, tryptophan, norleucine, tuberonic acid hexoside, quercetin-O-hexoside, luteolin-O-rhamnosylhexoside, luteolin-6-C-hexoside succinic acid, gallic acid-O-hexoside, dihydroxybenzoic acid and hydroxybenzoic acid. Maleic acid showed promising antifungal activity. In summary, A. tricolor is a good source of antioxidant and antimicrobial compounds. Full article

To understand fumaric acid sludge (FAS) systematically and comprehensively and find out how to utilize it, we conducted a series of characterization analyses on FAS. Fourier transform infrared (FT-IR) Spectra shows that the main component of FAS is fumaric acids and also contains a small amount of silicate. The nuclear magnetic resonance hydrogen (¹H-NMR) spectrum also shows that fumaric acid accounted for a large proportion of FAS. The X-ray diffraction (XRD) shows that the main phase in FAS is fumaric acid, and there is also a small amount of Kaliophilite. After gas chromatography and mass spectrometry (GC-MS) and pyrolysis gas chromatography and mass spectrometry (Py-GC-MS) analysis, it indicates that the possible volatiles and pyrolysis products in FAS are fumaric acid, maleic acid, maleic anhydride, phthalic acid, etc. In the test of Liquid chromatography and mass spectrometry (LC-MS), we determined the contents of phthalic acid, fumaric acid, and maleic acid in FAS. The detailed mass content of each component in FAS is as follows: phthalic acid is about 0.10–0.15%; maleic anhydride is about 0.40–0.80%; maleic acid is about 18.40–19.0%; fumaric acid is about 55.00–56.90%; succinic anhydride is about 0.06–0.08%; acrylic acid is about 0.06–0.08%; malic acid is about 0.90–1.00%; acetic acid is about 0.10–0.20%; silicate is about 0.25–0.30%; phthalic anhydride is about 0.20–0.30%; water is about 24.30–24.80%. The filtrate loss reducer (PAAF) used in oilwell drilling fluids synthesized by FAS not only has excellent temperature and complex saline resistance, the API filtration loss (FL) was only 13.2 mL/30 min in the complex saline based mud, but is also cost-effective. Full article

Miconazole shows low oral bioavailability in humans due to poor aqueous solubility, although it has demonstrated various pharmacological activities such as antifungal, anti-tubercular and anti-tumor effects. Cocrystal/salt formation is one of the effective methods for solving this problem. In this study, different methods (liquid-assisted grinding, slurrying and lyophilization) were used to investigate their impact on the formation of the miconazole multicomponent crystals with succinic, maleic and dl-tartaric acids. The solid state of the prepared powder was characterized by differential scanning calorimetry, powder X-ray diffraction and scanning electron microscopy. It was found that lyophilization not only promotes partial amorphization of both salts but also allows obtaining a new polymorph of the miconazole salt with dl-tartaric acid. The lyophilized salts compared with the same samples prepared by two other methods showed better dissolution rates but low stability during the studies due to rapid recrystallization. Overall, it was determined that the preparation method of multicomponent crystals affects the solid-state characteristics and miconazole physicochemical properties significantly. The in vivo studies revealed that the miconazole multicomponent crystals indicated the higher peak blood concentration and area under the curve from 0 to 32 h values 2.4-, 2.9- and 4.6-fold higher than the pure drug. Therefore, this study demonstrated that multicomponent crystals are promising formulations for enhancing the oral bioavailability of poorly soluble compounds. Full article

The efficient mineralization of high-concentration aqueous aniline (HCAA) is an issue needing to be resolved. In this study, a hybrid process of ozonation and electrochemical oxidation (ECO) was proposed for improving the mineralization of HCAA (1000 mg·L⁻¹). The results indicated that chemical oxygen demand (COD) removal by the hybrid process was far greater than that of a single ozonation or ECO process, revealing that the hybrid process might avoid low efficiency in late ozonation and initial ECO. Thus, a subsequent combination effect clearly existed. In this hybrid process, ozonation stage time was selected as 60 min for optimal COD removal. The main products of the ozonation stage were maleic and succinic acids, with declining pH which was beneficial to the following ECO stage. Nitrite and nitrate formed during ozonation, which acted as electrolytes for the ECO stage, in which maleic and succinic acids were fully degraded and pH thus increased. Moreover, the aniline degradation mechanism of the hybrid process was deduced, demonstrating the superiority of this hybrid process. Finally, more than 95% COD removal was achieved, which met the COD limit requirement and achieved pH control simultaneously, according to the discharge standards of water pollutants for dyeing and finishing of the textile industry in China (GB 4287–2012). Full article

To better understand precursors of dicarboxylic acids in ambient secondary organic aerosol (SOA), we studied C4–C9 dicarboxylic acids present in SOA formed from the oxidation of toluene, naphthalene, α-pinene, and isoprene. C4–C9 dicarboxylic acids present in SOA were analyzed by offline derivatization gas chromatography–mass spectrometry. We revealed that C4 dicarboxylic acids including succinic acid, maleic acid, fumaric acid, malic acid, DL-tartaric acid, and meso-tartaric acid are produced by the photooxidation of toluene. Since meso-tartaric acid barely occurs in nature, it is a potential aerosol tracer of photochemical reaction products. In SOA particles from toluene, we also detected a compound and its isomer with similar mass spectra to methyltartaric acid standard; the compound and the isomer are tentatively identified as 2,3-dihydroxypentanedioic acid isomers. The ratio of detected C4–C5 dicarboxylic acids to total toluene SOA mass had no significant dependence on the initial VOC/NO_x condition. Trace levels of maleic acid and fumaric acid were detected during the photooxidation of naphthalene. Malic acid was produced from the oxidation of α-pinene and isoprene. A trace amount of succinic acid was detected in the SOA produced from the oxidation of isoprene. Full article