Search Results (19)

The modulation of the magneto-optical signal is a crucial research focus in the field of magneto-optics. Micron arrays of varying shapes were fabricated using the UV exposure technique, and their effects were tested on the magneto-optical Kerr response of CoFeB thin films. The influence of the organic–inorganic interface on the magneto-optical Kerr effect (MOKE) was investigated by utilizing organic materials to fabricate arrays. The results indicate that the micron-scale metal array exhibits a limited enhancement of the magneto-optical Kerr signal, but it can change the ferromagnetic strength and the magnetization speed of the magnetic layer. This is because the electron orbit coupling at the organic–inorganic interface enhances the performance of the magnetic film. When a photoresist is used as the array material, the longitudinal magneto-optical Kerr signal of the CoFeB film increases by at least two-fold. The enhancement effect of different shapes of arrays is different because of the different contact area with the CoFeB film. Full article

Magnetic nanoparticles (MNPs) are interesting for their potential employment in biomedical and environmental technologies. Although they have been characterized by many techniques, there are some issues that need to be solved. For instance, it is not yet possible to finely characterize their size distribution or to detect their local magnetic properties. In this work, commercial MNPs were employed, which were made of iron oxide cores with a mean diameter of 8 nm embedded in a matrix of dextran to form skeins with a mean diameter of 20 nm. These MNPs have been dispersed in keratin, a natural protein extracted from wool. Thin films have been realized by spin coating water solutions with various MNP concentrations. Analysis was conducted using a set of techniques, namely Atomic Force Microscopy, Environmental Scanning Electron Microscopy, a Physical Property Measurement System–Vibrating Sample Magnetometer, and the spatially resolved Magneto-Optic Kerr Effect (NanoMOKE). These MNPs show superparamagnetic properties, although a wide distribution of blocking temperature values indicates that the cores are not isolated and interact with others. NanoMOKE not only allows us to map the magnetic behavior of MNP clusters, but also to detect the presence of isolated MNPs dispersed in the keratin matrix. Full article

Composite magnetic nanostructures are a subject of high research interest, as they provide a number of exciting effects absent in live nature. Among others, much attention has been paid to the studies of exchange coupling in antiferromagnetic/ferromagnetic (AFM/FM) films, which leads to the pinning effect. It manifests itself as a widening and shift of the magnetic hysteresis loop with respect to zero value of the external magnetic field oriented along the pinning direction. In this work, we report on comparative studies of linear and nonlinear magneto-optical effects under the laser-induced switching of the pinning effect in IrMn/CoFe films of various thickness of the ferromagnetic CoFe layer. We found that the magneto-optical response of the pinned AFM/FM nanofilms appears with different hysteresis loop parameters in the transverse magneto-optical Kerr effect (MOKE) and interface-sensitive magnetization-induced second harmonic generation (SHG), indicating the diversity of the magnetic effects at interfaces compared to the bulk of the films. Full article

In this study, we present a novel investigation into the magnetic and morphological properties of equiatomic B2-ordered FeRh thin films irradiated with single high-intensity ultrashort laser pulses. The goal is to elucidate the effect of femtosecond laser ablation on the magnetic properties of FeRh. We employed Scanning Magneto-Optical Kerr Effect (S-MOKE) microscopy to examine the magnetic phase after laser processing, providing high spatial resolution and sensitivity. Our results for the first time demonstrated the appearance of a magneto-optical signal from the bottom of ablation craters, suggesting a transition from antiferromagnetic to ferromagnetic behavior. Fluence-resolved measurements clearly demonstrate that the ablation threshold coincides with the threshold of the antiferromagnet-to-ferromagnet phase transition. The existence of such a magnetic phase transition was independently confirmed by temperature-dependent S-MOKE measurements using a CW laser as a localized heat source. Whereas the initial FeRh film displayed a reversible antiferromagnet-ferromagnet phase transition, the laser-ablated structures exhibited irreversible changes in their magnetic properties. This comprehensive analysis revealed the strong correlation between the femtosecond laser ablation process and the magnetic phase transformation in FeRh thin films. Full article

Hydrotalcites (HTlcs) are a class of nanostructured layered materials that may be employed in a variety of applications, from green to bio technologies. In this paper, we report an investigation on HTlcs made of Mg and Fe, recently employed to improve the growth in vitro of osteoblasts within a keratin sponge. We carried out an analysis of powder materials and of HTlcs dispersed in keratin and spin-coated on a Si/SiO₂ substrate at different temperatures. A magnetic study of the powders was carried out with a Quantum Design Physical Property Measurement System equipped with a Vibrating Sample Magnetometer. The data gathered prove that these HTlcs are fully paramagnetic, and keratin showed a very small magnetic response. Optical and Atomic Force Microscopy analyses of the thin films provide a detailed picture of clusters randomly dispersed in the films with various dimensions. The magnetic properties of these films were characterized using the Nano Magneto Optical Kerr Effect (NanoMOKE) down to 7.5 K. The data collected show that the local magnetic properties can be mapped with a micrometric resolution distinguishing HTlc regions from keratin ones. This approach opens new perspectives in the characterization of these composite materials. Full article

In this study, a simple growth of permalloy NiFe (Py) thin films on a semiconductive Si substrate using the electrochemical deposition method is presented. The electrodeposition was performed by applying a direct current of 2 mA/cm² during different times of 120 and 150 s and thin films with different thicknesses of 56 and 70 nm were obtained, respectively. The effect of Py thickness on the magnetic properties of thin films was investigated. Field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), atomic force microscopy (AFM), ferromagnetic resonance (FMR), anisotropic magnetoresistance (AMR), and magneto-optic Kerr effect (MOKE) analyses were performed to characterize the Py thin films. It was observed that the coercivity of the Py thin film increases by increasing the thickness of the layer. Microscopic images of the layers indicated granular growth of the Py thin films with different roughness values leading to different magnetic properties. The magnetic resonance of the Py thin films was measured to fully describe the magnetic properties of the layers. The magnetoresistance ratios of deposited Py thin films at times of 120 and 150 s were obtained as 0.226% and 0.235%, respectively. Additionally, the damping constant for the deposited sample for 120 s was estimated as 1.36 × 10⁻², which is comparable to expensive sputtered layers’ characteristics. Full article

Magnetic multilayer with large perpendicular magnetic anisotropy (PMA) has attracted sustained interest owing to its importance to fundamental physics and applications. In this work, the high quality of Pt/Co/Pt heterostructures with large PMA was successfully achieved to exhibit a large anomalous Hall effect (AHE) with squared Hall loops. By calculating the proportional relationship between the longitudinal resistivity $({\rho }_{xx})$ and the abnormal Hall coefficient (R_s), it is confirmed that the basic mechanism of AHE comes from the external skew scattering (SS) and side jump (SJ), while SS contribution, related to asymmetric scattering from impurities, is dominant in the AHE. Furthermore, the obvious magneto-optical Kerr effect (MOKE) was also observed using the polar MOKE microscopy. The obviously circular magnetic domain can form and propagate in response to the applied out-of-plane magnetic field, resulting in the magnetization reversal of the entire film. This work offers important information in terms of both AHE and MOKE in the ultrathin ferromagnetic films with perpendicular anisotropy, establishing the application foundation for the nonvolatile memories and spintronics. Full article

Deep insights into microstructures and domain wall behaviors in the evaluation of different material statuses under elastic and plastic stress ranges have essential implications for magnetic sensing and nondestructive testing and evaluation (NDT&E). This paper investigates the repeatability and stability of residual magnetic field (RMF) signals using a magneto-optical Kerr effect microscope for the stress characterization of silicon steel sheets beyond their elastic limit. Real-time domain motion is used for RMF characterization, while both the repeatability under plastic ranges after the cyclic stress rounds and stability during relaxation time are studied in detail. The distinction between elastic and plastic materials is discussed in terms of their spatio-temporal properties for further residual stress measurement since both ranges are mixed. During the relaxation time, the RMF of the plastic material shows a two-stage change with apparent recovery, which is contrasted with the one-stage change in the elastic material. Results show that the grain boundary affects the temporal recovery of the RMF. These findings concerning the spatio-temporal properties of different RMFs in plastic and elastic materials can be applied to the design and development of magnetic NDT&E for (residual) stress measurement and material status estimation. Full article

Nanoporous Co₄₀Fe₄₀B₂₀ (CoFeB) and sandwich tungsten (W)/CoFeB/W thin films were fabricated via an anodic aluminum oxide (AAO) template-assisted magneto sputtering process. Their thickness-dependent magneto-optical Kerr effect (MOKE) hysteresis loops were investigated for enhanced Kerr rotation. Control of the Kerr null points of the polarized reflected light can be realized via the thicknesses of the CoFeB layers and W layers. Simulation of the thickness-dependent phase difference change by the finite element method reveals the existence of the two Kerr null points for W/CoFeB/W thin films, matching the experimental result very well. However, there are two additional Kerr null points for pure CoFeB thin films according to the simulation by comparing with the experimental result (only one). Theoretical analysis indicates that the different Kerr null points between the experimental result and the simulation are mainly due to the enhanced inner magnetization in the ferromagnetic CoFeB layer with the increased thickness, which is usually omitted in the simulation. Clearly, the introduction of non-ferromagnetic W layers can experimentally regulate the Kerr null points of ferromagnetic thin films. Moreover, construction of W/CoFeB/W sandwich thin films can greatly increase the highest magneto-optical susceptibility and the saturated Kerr rotation angle when compared with CoFeB thin films of the same thickness. Full article

The Wiegand wire is known to exhibit a unique feature of fast magnetization reversal in the magnetically soft region accompanied by a large Barkhausen jump. We clarified a significant difference between the magnetization reversals at the surface and at the entire cross section of a Wiegand wire. We conducted magnetization measurements based on the magneto-optical Kerr effect and applied conventional methods to determine the magnetization curves. The switching field of the magnetization reversal at the surface was greater than that at the initiation of a large Barkhausen jump. Our analysis suggests that the outer surface layer exhibits low coercivity. Full article

There is a pressing demand to improve the performance of cost-effective soft magnetic materials for use in high performance sensors and devices. Giant Magneto-impedance effect (GMI), or fast single domain wall (DW) propagation can be observed in properly processed magnetic microwires. In this paper we have identified the routes to obtain microwires with unique combination of magnetic properties allowing observation of fast and single DW propagation and GMI effect in the same microwire. By modifying the annealing conditions, we have found the appropriate regimes allowing achievement of the highest GMI ratio and the fastest DW dynamics. The observed experimental results are discussed considering the radial distribution of magnetic anisotropy and the correlation of GMI effect, and DW dynamics with bulk and surface magnetization processes. Studies of both Fe- and Co-rich microwires, using the magneto-optical Kerr effect, MOKE, provide information on the magnetic structure in the outer shell of microwires. We have demonstrated the existence of the spiral helical structure in both studied microwires. At the same time, torsion mechanical stresses induce helical bistability in the same microwires, which allow us to consider these microwires as materials suitable for sensors based on the large Barkhausen jump. Full article

Asymmetric magnetic hysteresis loops are usually found in exchange bias (EB) systems, typically after field cooling a system below the Néel temperature of an antiferromagnet exchange coupled to a ferromagnet. Alternatively, asymmetric hysteresis loops may occur due to undetected minor loops or in systems with a rotational anisotropy. Here, we report on an exchange bias thin film system MgO(100)/Co/CoO, examined at room temperature, which is far above the blocking temperature, by the magneto-optical Kerr effect (MOKE). While the longitudinal hysteresis loops partly show steps which are well-known from diverse purely ferromagnetic systems, the transverse hysteresis loops exhibit clear asymmetries, similar to exchange biased systems at low temperatures, and unusual transverse magnetization values at saturation. Since minor loops and a rotational anisotropy can be excluded in this case, this asymmetry can possibly be a residue of the exchange bias coupling at lower temperatures. Full article

Research regarding topological Dirac and Weyl semimetals contributes to our understanding not only of the field of solid-state physics, but also the field of high-energy physics as the physics of Dirac and Weyl semimetals resembles the physics of Dirac and Weyl massless fermions. In condensed matter physics, the Weyl nodes are detached in momentum space and may be realized as emergent quasiparticles with a distinct chirality, left-handed or right-handed. These states lead to phenomena like the chiral anomaly and the anomalous Hall effect (AHE). Furthermore, the combination of quantum effects and magnetic effects in magnetic Weyl semimetals is very intriguing. Magneto-optical tools, which are usually used to study magnetic phenomena, also contribute to magnetic Weyl semimetals. Moreover, with the magneto-optical technique, it is possible to follow the dynamics of the processes and to study the lifetime of the Weyl states. In this work, we review and discuss the effects of using magneto-optical tools for studying quantum effects like the chiral anomaly or magnetic effects in magnetic Weyl and Dirac systems using the magneto-optical Kerr effect (MOKE) or Faraday systems including a single detection and imaging. Examples of using magneto-optical systems in the research of ultrafast magnetic dynamics of thin polycrystalline nickel and permaloy are reviewed as are the magnetic spatial dynamics by employing magneto-optical Kerr or Faraday microscopy tools with ferromagnetic thin films. Interestingly, the excitation of a circularly polarized femtosecond laser pulse could lead to the breakage of time-reversal symmetry and to the transformation of the Dirac state to the Floquet–Weyl semimetal state. The development of a suitable ultrafast magneto-optical system for Weyl systems is discussed, and the practical difficulties for the realization of such a system are considered. Full article

Optical properties of metal nanostructures, governed by the so-called localised surface plasmon resonance (LSPR) effects, have invoked intensive investigations in recent times owing to their fundamental nature and potential applications. LSPR scattering from metal nanostructures is expected to show the symmetry of the oscillation mode and the particle shape. Therefore, information on the polarisation properties of the LSPR scattering is crucial for identifying different oscillation modes within one particle and to distinguish differently shaped particles within one sample. On the contrary, the polarisation state of light itself can be arbitrarily manipulated by the inverse designed sample, known as metamaterials. Apart from polarisation state, external stimulus, e.g., magnetic field also controls the LSPR scattering from plasmonic nanostructures, giving rise to a new field of magneto-plasmonics. In this review, we pay special attention to polarisation and its effect in three contrasting aspects. First, tailoring between LSPR scattering and symmetry of plasmonic nanostructures, secondly, manipulating polarisation state through metamaterials and lastly, polarisation modulation in magneto-plasmonics. Finally, we will review recent progress in applications of plasmonic and magneto-plasmonic nanostructures and metamaterials in various fields. Full article

The magneto-optical Kerr effect (MOKE) has recently been achieved on non-ferromagnetic metals by injecting spin currents. To use the magneto-optical Kerr effect as a quantitative tool, it is crucial to study the relationship between the Kerr rotation angle and the spin accumulation on non-ferromagnets. In this work, I measure a transient magneto-optical Kerr rotation on non-ferromagnetic metals of Cu, Au, and Pt driven by an ultrafast spin current from an adjacent ferromagnetic metal. Through comparing the measured Kerr rotation and the calculated spin accumulation, I determine the conversion ratio between the Kerr rotation and the spin accumulation to be: −4 × 10⁻⁹ (real part), −2.5 × 10⁻⁸ (real part), and −3 × 10⁻⁹ (imaginary part) rad m A⁻¹ for Cu, Au, and Pt, respectively, at a wavelength of 784 nm. Full article