Search Results (35)

In the pursuit of advancing sustainable energy storage solutions, solid-state batteries (SSBs) have emerged as a formidable contender to traditional lithium-ion batteries, distinguished by their superior energy density, augmented safety measures, and improved cyclability. Amid escalating concerns regarding resource scarcity, environmental ramifications, and the safety hazards posed by lithium-ion technologies, the exploration into non-lithium SSBs has emerged as a crucial frontier for technological breakthroughs. This exhaustive review delves into the latest progressions and persisting challenges within the sphere of sodium (Na), potassium (K), and magnesium (Mg) SSBs, spotlighting seminal materials, cutting-edge technologies, and strategic approaches propelling advancements in this vibrant domain. Despite considerable progress, hurdles such as amplifying ionic conductivity, mitigating the intricacies at the electrode–electrolyte interface, and realizing scalable production methodologies continue to loom. Nevertheless, the trajectory for non-lithium SSBs holds considerable promise, poised to redefine the landscape of electric vehicles, portable electronics, and grid stabilization technologies, thereby marking a significant leap toward realizing a sustainable and energy-secure future. This review article aims to provide a detailed overview of the materials and methodologies underpinning the development of these next-generation energy storage devices, underscoring their potential to catalyze a paradigm shift in our approach to energy storage and utilization. Full article

Phosphatases are enzymes that catalyze the hydrolysis of phosphate esters. They play critical roles in diverse biological processes such as extracellular nucleotide homeostasis, transport of molecules across membranes, intracellular signaling pathways, or vertebrate mineralization. Among them, tissue-nonspecific alkaline phosphatase (TNAP) is today increasingly studied, due to its ubiquitous expression and its ability to dephosphorylate a very broad range of substrates and participate in several different biological functions. For instance, TNAP hydrolyzes inorganic pyrophosphate (PP_i) to allow skeletal and dental mineralization. Additionally, TNAP hydrolyzes pyridoxal phosphate to allow cellular pyridoxal uptake, and stimulate vitamin B6-dependent reactions. Furthermore, TNAP has been identified as a key enzyme in non-shivering adaptive thermogenesis, by dephosphorylating phosphocreatine in the mitochondrial creatine futile cycle. This latter recent discovery and others suggest that the list of substrates and functions of TNAP may be much longer than previously thought. In the present review, we sought to examine TNAP within the alkaline phosphatase (AP) superfamily, comparing its sequence, structure, and evolutionary trajectory. The AP superfamily, characterized by a conserved central folding motif of a mixed beta-sheet flanked by alpha-helices, includes six subfamilies: AP, arylsulfatases (ARS), ectonucleotide pyrophosphatases/phosphodiesterases (ENPP), phosphoglycerate mutases (PGM), phosphonoacetate hydrolases, and phosphopentomutases. Interestingly, TNAP and several ENPP family members appear to participate in the same metabolic pathways and functions. For instance, extra-skeletal mineralization in vertebrates is inhibited by ENPP1-mediated ATP hydrolysis into the mineralization inhibitor PP_i, which is hydrolyzed by TNAP expressed in the skeleton. Better understanding how TNAP and other AP family members differ structurally will be very useful to clarify their complementary functions. Structurally, TNAP shares the conserved catalytic core with other AP superfamily members but has unique features affecting substrate specificity and activity. The review also aims to highlight the importance of oligomerization in enzyme stability and function, and the role of conserved metal ion coordination, particularly magnesium, in APs. By exploring the structural and functional diversity within the AP superfamily, and discussing to which extent its members exert redundant, complementary, or specific functions, this review illuminates the evolutionary pressures shaping these enzymes and their broad physiological roles, offering insights into TNAP’s multifunctionality and its implications for health and disease. Full article

In this study, we first fabricated a crosslinked hydrogel coating by polymerizing methacryloyloxyethyl sulfonyl betaine and acrylamide (SBMA) on the magnesium (Mg) alloy surface employing ultraviolet (UV) polymerization. Bivalirudin and CO-releasing molecules (CORM-401) were further grafted onto the hydrogel coating surface to acquire a multifunctional biocompatible coating capable of releasing CO to augment corrosion-resisting properties and biocompatibility. The findings verified that the bioactive hydrogel coating significantly increased the corrosion potential and reduced the corrosion current, thereby improving the anticorrosion performance. Meanwhile, owing to the excellent hydrophilicity, the antifouling performance of the hydrogel coating, and the excellent anticoagulant performance of bivalirudin, the hydrogel coating significantly reduced the fibrinogen adsorption, platelet adhesion and activation, and hemolysis occurrence, displaying excellent ability to inhibit blood clotting. Moreover, endothelial cell (EC) experimental results demonstrated that the hydrogel coating could significantly promote EC growth, displaying great potential to induce re-endothelialization after implantation. Specifically, in the presence of cysteine capable of catalyzing CO release, the anticoagulant performance and ability to promote EC growth were further improved significantly. Therefore, the study offers an effective strategy to prepare a hydrogel coating capable of releasing CO to improve the corrosion-resisting performance and biocompatibility of Mg alloys, which is anticipated to be applied in the surface modification of Mg alloy intravascular stents. Full article

Water is a potential green source for the generation of clean elemental hydrogen without contaminants. One of the most convenient methods for hydrogen generation is based on the oxidation of different metals by water. The inspection of the catalytic activity toward hydrogen formation from water performed in this study was carried out using four different metals, namely, zinc, magnesium, iron, and manganese. The process is catalyzed by in situ-generated nickel nanoparticles. The zinc–water system was found to be the most effective and exhibited 94% conversion in 4 h. The solid phase in the latter system was characterized by PXRD and SEM techniques. Several blank tests provided a fundamental understanding of the role of each constituent within the system, and a molecular mechanism for the catalytic cycle was proposed. Full article

The latest advances in technology and materials science have catalyzed a transformative shift towards the adoption of environmentally conscious and lightweight materials across key sectors such as aeronautics, biomedical, and automotive industries. Noteworthy among these innovations are the magnesium-aluminum (Mg-Al) alloys employed in aeronautical applications, contributing to the overall reduction in aircraft weight and subsequently diminishing fuel consumption and mitigating atmospheric emissions. The present work delves into a study of the anti-corrosive properties inherent in various sol-gel coatings, leveraging a range of environmentally friendly corrosion inhibitors, specifically tailored for samples of the AZ61 alloy. Methodologically, the work involves the synthesis and application of sol-gel coatings on AZ61 alloy containing eco-friendly inhibitors: L-cysteine, N-acetyl-cysteine, curcumin and methylene blue. Subsequently, an accelerated corrosion test in a simulated saline environment is performed. Through microstructural and compositional analyses, the best inhibitors responses are achieved with inhibitors containing S, N heteroatoms and conjugated double bonds in their structure, probably due to the creation of a continuous MgCl₂ layer. This research contributes to the ongoing discourse on protective eco-coatings, aligning with the broader paradigm shift towards sustainable and lightweight materials in key industries. Full article

DNA-based enzymes, or DNAzymes, are single-stranded DNA sequences with the ability to catalyze various chemical reactions, including the cleavage of the bond between two RNA nucleotides. Lately, an increasing interest has been observed in these RNA-cleaving DNAzymes in the biosensing and therapeutic fields for signal generation and the modulation of gene expression, respectively. Additionally, multiple efforts have been made to study the effects of the reaction environment and the sequence of the catalytic core on the conversion of the substrate into product. However, most of these studies have only reported alterations of the general reaction course, but only a few have focused on how each individual reaction step is affected. In this work, we present for the first time a mathematical model that describes and predicts the reaction of the 10–23 RNA-cleaving DNAzyme. Furthermore, the model has been employed to study the effect of temperature, magnesium cations and shorter substrate-binding arms of the DNAzyme on the different kinetic rate constants, broadening the range of conditions in which the model can be exploited. In conclusion, this work depicts the prospects of such mathematical models to study and anticipate the course of a reaction given a particular environment. Full article

Chlorophyll biosynthesis is a crucial biological process in plants, and chlorophyll content is one of the most important traits in rice breeding programs. In this study, we identified a lethal, chlorophyll-deficient, yellow seedling (YS) phenotype segregating in progeny of CR5055-21, an F₂ plant derived from a backcross between Korean japonica variety ‘Hwaseong’ (Oryza sativa) and CR5029, which is mostly Hwaseong with a small amount of Oryza grandiglumis chromosome segments. The segregation of the mutant phenotype was consistent with a single gene recessive mutation. Light microscopy of YS leaf cross-sections revealed loosely arranged mesophyll cells and sparse parenchyma in contrast to wildtype. In addition, transmission electron microscopy showed that chloroplasts did not develop in the mesophyll cells of the YS mutant. Quantitative trait loci (QTL)-seq analysis did not detect any significant QTL, however, examination of the individual delta-SNP index identified a 2-bp deletion (AG) in the OsCHLI gene, a magnesium (Mg)-chelatase subunit. A dCAPs marker was designed and genotyping of a segregating population (n = 275) showed that the mutant phenotype co-segregated with the marker. The 2-bp deletion was predicted to result in a frameshift mutation generating a premature termination. The truncated protein likely affects formation and function of Mg-chelatase, which consists of three different subunits that together catalyze the first committed step of chlorophyll biosynthesis. Transcriptome analysis showed that photosynthesis and carbohydrate metabolism pathways were significantly altered although expression of OsCHLI was not. Chlorophyll- and carotenoid-related genes were also differentially expressed in the YS mutant. Our findings demonstrated that OsCHLI plays an important role in leaf pigment biosynthesis and leaf structure development in rice. Full article

Biofuel cells (BFCs) with enzymatic electrocatalysts have attracted significant attention, especially as power sources for wearable and implantable devices; however, the applications of BFCs are limited owing to the limited O₂ supply. This can be addressed by using air-diffusion-type bilirubin oxidase (BOD) cathodes, and thus the further development of the hierarchical structure of porous electrodes with highly effective specific surface areas is critical. In this study, a porous layer of gold is deposited over magnesium-oxide-templated carbon (MgOC) to form BOD-based biocathodes for the oxygen reduction reaction (ORR). Porous gold structures are constructed via electrochemical deposition of gold via dynamic hydrogen bubble templating (DHBT). Hydrogen bubbles used as a template and controlled by the Coulomb number yield a porous gold structure during the electrochemical deposition process. The current density of the ORR catalyzed by BOD without a redox mediator on the gold-modified MgOC electrode was 1.3 times higher than that of the ORR on the MgOC electrode. Furthermore, the gold-deposited electrodes were modified with aromatic thiols containing negatively charged functional groups to improve the orientation of BOD on the electrode surface to facilitate efficient electron transfer at the heterogeneous surface, thereby achieving an ORR current of 12 mA cm⁻² at pH 5 and 25 °C. These results suggest that DHBT is an efficient method for the fabrication of nanostructured electrodes that promote direct electron transfer with oxidoreductase enzymes. Full article

This paper provides a study of the liquid-phase polypropylene polymerization on a heterogeneous titanium–magnesium Ziegler–Natta-type catalyst. A kinetic model was developed that included the activation of potential active centers, chain growth, transferring the chains to hydrogen and monomer, and the deactivation of active centers. The model was created to predict the polymerization rate, polymer yield, and average molecular weights of polymer chains where the polymerization temperature changes from 40 to 90 °C. In developing polycentric kinetic models, there is a difficulty associated with evaluating the kinetic constants of the rates of elementary reactions/stages in polymerization. Each heterogeneous titanium–magnesium catalyst (TMC), including a co-catalyst, as well as an internal and an external electron donor, has its own set of kinetic parameters. Therefore, its kinetic parameters must be defined for each new catalyst. The presented algorithm for identifying the kinetic constants of rates starts with a kinetic model that considers one type of active centers. At the second stage, a deconvolutional analysis is used for the molecular weight distribution (MWD) of the gel permeation chromatography (GPC) data of the polypropylene samples and the most probable distribution of Flory chain lengths is found for each type of active centers. At the third stage, the single-center model is transformed into a polycentric kinetic model. For the catalyst system, five types of active centers were identified, together with a mass fraction and a number-average molecular weight for each active center type of the catalyst, which is consistent with the published results for similar Ti-based Ziegler–Natta catalysts. Full article

In recent years, the interest in the health-promoting effects of hop prenylflavonoids, especially its estrogenic effects, has grown. Unfortunately, one of the most potent phytoestrogens identified so far, 8-prenylnaringenin, is only a minor component of hops, so its isolation from hop materials for the production of estrogenically active food supplements has proved to be problematic. The aim of this study was to optimize the conditions (e.g., temperature, the length of the process and the amount of the catalyst) to produce 8-prenylnaringenin-rich material by the magnesium oxide-catalyzed thermal isomerization of desmethylxanthohumol. Under these optimized conditions, the yield of 8-prenylnaringenin was 29 mg per 100 gDW of product, corresponding to a >70% increase in its content relative to the starting material. This process may be applied in the production of functional foods or food supplements rich in 8-prenylnaringenin, which may then be utilized in therapeutic agents to help alleviate the symptoms of menopausal disorders. Full article

Hydrogen storage in magnesium-based composites has been an outstanding research area including a remarkable improvement of the H-sorption properties of this system in the last 5 years. Numerous additives of various morphologies have been applied with great success to accelerate the absorption/desorption reactions. Different combinations of catalysts and preparation conditions have also been explored to synthesize better hydrogen storing materials. At the same time, ball milling is still commonly and effectively applied for the fabrication of Mg-based alloys and composites in order to reduce the grain size to nanometric dimensions and to disperse the catalyst particles over the surface of the host material. In this review, we present the very recent progress, from 2016 to 2021, on catalyzing the hydrogen sorption of Mg-based materials by ball milling. The various catalyzing routes enhancing the hydrogenation performance, including in situ formation of catalysts and synergistic improvement achieved by using multiple additives, will also be summarized. At the end of this work, some thoughts on the prospects for future research will be highlighted. Full article

Choline kinase (ChoK) is a cytosolic enzyme that catalyzes the phosphorylation of choline to form phosphorylcholine (PCho) in the presence of ATP and magnesium. ChoK is required for the synthesis of key membrane phospholipids and is involved in malignant transformation in a large variety of human tumours. Active compounds against ChoK have been identified and proposed as antitumor agents. The ChoK inhibitory and antiproliferative activities of symmetrical bispyridinium and bisquinolinium compounds have been defined using quantitative structure–activity relationships (QSARs) and structural parameters. The design strategy followed in the development of the most active molecules is presented. The selective anticancer activity of these structures is also described. One promising anticancer compound has even entered clinical trials. Recently, ChoKα inhibitors have also been proposed as a novel therapeutic approach against parasites, rheumatoid arthritis, inflammatory processes, and pathogenic bacteria. The evidence for ChoKα as a novel drug target for approaches in precision medicine is discussed. Full article

Magnesium hydride (MgH₂) has received significant attention due to its potential applications as solid-state hydrogen storage media for useful fuel cell applications. Even though MgH₂ possesses several attractive hydrogen storage properties, it cannot be utilized in fuel cell applications due to its high thermal stability and poor hydrogen uptake/release kinetics. High-energy ball milling, and mechanically-induced cold-rolling processes are the most common techniques to introduce severe plastic deformation and lattice imperfection in the Mg/MgH₂. Furthermore, using one or more catalytic agents is considered a practical solution to improve both the de-/rehydrogenation process of MgH₂.These treatments are usually dedicated to enhance its hydrogen storage properties and deduce its thermal stability. However, catalyzation of Mg/MgH₂ powders with a desired catalytic agent using ball milling process has shown some disadvantages due to the uncontrolled distribution of the agent particles in the MgH₂ powder matrix. The present study has been undertaken to employ a cold gas-dynamic spray process for catalyzing the fresh surfaces of mechanically-induced cold-rolled Mg ribbons with Ni powder particles. The starting Mg-rods were firstly heat treated and forged 200 times before cold rolling for 300 passes. The as-treated ribbons were then catalyzed by Ni particles, using cold gas-dynamic spray process. In this catalyzation approach, the Ni particles were carried by a stream of Ar gas via a high-velocity jet at a supersonic velocity. Accordingly, the pelted Ni particles penetrated the Mg-substrate ribbons, and hence created numerous micropores into the Mg, allowed the Ni particles to form a homogeneous network of catalytic active sites in Mg substrate. As the number of coating time increased to three times, the Ni concentration increased (5.28 wt.%), and this led to significant enhancement of the Mg-hydrogen storage capacity, as well as improving the de-/rehydrogenation kinetics. This is evidenced by the high value of hydrogen storage capacity (6.1 wt.% hydrogen) and the fast gas uptake kinetics (5.1 min) under moderate pressure (10 bar) and temperature (200 °C). The fabricated nanocomposite MgH₂/5.28 wt.% Ni strips have shown good dehydrogenation behavior, indicated by their capability to desorb 6.1 wt.% of hydrogen gas within 11 min at 200 °C under 200 mbar of hydrogen pressure. Moreover, this system possessed long cycle-life-time, which extended to 350 h with a minimal degradation in the storage and kinetics behavior. Full article

Aliphatic polyesters are an important class of polymeric materials for biomedical applications due to their versatile and tunable chemistry, biocompatibility and biodegradability. A capability of direct bonding with biomedically significant molecules, provided by the presence of the reactive end functional groups (FGs), is highly desirable for prospective polymers. Among FGs, N-hydroxysuccinimidyl activated ester group (NHS) and maleimide fragment (MI) provide efficient covalent bonding with –NH– and –SH containing compounds. In our study, we found that NHS- and MI-derived acyl chlorides efficiently terminate living ring-opening polymerization of ε-caprolactone, L-lactide, ethyl ethylene phosphonate and ethyl ethylene phosphate, catalyzed by 2,6-di-tert-butyl-4-methylphenoxy magnesium complex, with a formation of NHS- and MI-functionalized polymers at a high yields. Reactivity of these polymers towards amine- and thiol-containing model substrates in organic and aqueous media was also studied. Full article

For systems biology, it is important to describe the kinetic and thermodynamic properties of enzyme-catalyzed reactions and reaction cascades quantitatively under conditions prevailing in the cytoplasm. While in part I kinetic models based on irreversible thermodynamics were tested, here in part II, the influence of the presumably most important cytosolic factors was investigated using two glycolytic reactions (i.e., the phosphoglucose isomerase reaction (PGI) with a uni-uni-mechanism and the enolase reaction with an uni-bi-mechanism) as examples. Crowding by macromolecules was simulated using polyethylene glycol (PEG) and bovine serum albumin (BSA). The reactions were monitored calorimetrically and the equilibrium concentrations were evaluated using the equation of state ePC-SAFT. The pH and the crowding agents had the greatest influence on the reaction enthalpy change. Two kinetic models based on irreversible thermodynamics (i.e., single parameter flux-force and two-parameter Noor model) were applied to investigate the influence of cytosolic conditions. The flux-force model describes the influence of cytosolic conditions on reaction kinetics best. Concentrations of magnesium ions and crowding agents had the greatest influence, while temperature and pH-value had a medium influence on the kinetic parameters. With this contribution, we show that the interplay of thermodynamic modeling and calorimetric process monitoring allows a fast and reliable quantification of the influence of cytosolic conditions on kinetic and thermodynamic parameters. Full article