Search Results (7)

Dyed wool samples and lake pigments prepared from the same dyestuffs were exposed to light over the course of 14 months. Brazilwood or sappanwood, cochineal, madder, and weld were used for both wools and pigments, with the addition of dyer’s broom, indigo, and tannin-containing black dyes for the wools and eosin for the pigments. The wools were dyed within the MODHT European project on historic tapestries (2002–2005), using recipes derived from fifteenth- to seventeenth-century sources. The pigments were prepared according to European recipes of the same period, or using late nineteenth-century French or English recipes. Colour measurements made throughout the experiment allowed for overall colour difference (ΔE₀₀) to be tracked and half-lives to be calculated for some of the colour changes. Alterations in the samples’ hue and chroma were also monitored, and spectral information was collected. The results showed that, for both textiles and pigments, madder is the most stable red dye, followed by cochineal, and then brazilwood. Eosin was the most fugitive sample examined. Comparisons of textile and lake samples derived from the same dyestuff, whether red or yellow, indicate that the colourants are more stable when used as textile dyes than in analogous lake pigments. Full article

This paper focuses on the first investigation of the 19th-century manufacture of red lake pigments obtained from madder by Winsor & Newton (W&N), prominent artists’ colourman at that time. The first approach to their manufacture was carried out by studying the madder entries of the company’s book P1, found in the W&N 19th Century Archive Database. Eleven production records were discovered under names such as Rose Madder, Madder Carmine, Madder Lake and Madder Rose. Three main methods of synthesis were identified and reproduced, revealing three main steps: washing of the madder roots (Rubia tinctorum L.); extraction in acid media and complexation with Al³⁺ using alum; and precipitation by the addition of salts such as ammonium carbonate and sodium borate. The syntheses were followed by UV-VIS spectroscopy, and the pigments were further characterised by colourimetry, Energy-Dispersive X-Ray Fluorescence Spectrometry (XRF), Fourier Transform Infrared Spectroscopy (FTIR) and High-Performance Liquid Chromatography-Diode Array Detector (HPLC-DAD). They all exhibited a rose hue in a highly insoluble aluminate matrix. Although the dye extraction was incomplete, alizarin, purpurin and pseudopurpurin were identified. An analytical comparison with a Rose Madder 19th-century oil paint tube was also performed by micro-FTIR and microspectrofluorimetry. This work intends to be foundational to a systematic study of the W&N’s 19th-century madder colours aiming to contribute new knowledge towards their identification and preservation in heritage objects. Full article

In the present work, a method is proposed that combines spectrofluorimetry with multivariate analysis (cluster and principal components) to non-invasively investigate natural dyes used, mainly in the form of lakes, in illuminations. First, a consistent number of mock-up samples of red and purple lakes (from brazilwood, madder, kermes, cochineal, lac dye, folium and orcein) were prepared following the recipes reported in ancient treatises, then the experimental conditions for their non-invasive investigation were optimized by benchtop instrumentation and transferred to a portable microprobe suitable for in situ analyses. For all the coloring materials examined, it was thus possible to obtain a satisfactory grouping of samples containing the same dye. The analytical protocol was finally extended to the characterization of dyes in the Crescenzago choir books, illuminated manuscripts dating back to the end of the 15th century. Full article

The wall paintings of five Hellenistic tombs in Apulia were analysed using a multi-technique approach to discern the painting techniques used and contextualise them within the phenomenon of Hellenistic tomb painting in Southern Italy. In particular, the question was asked whether technical knowledge played a role in the reception of Hellenistic artistic models and whether this knowledge was present locally. Raman and IR spectroscopies were used to identify pigments, colourants, and binders; light and electron microscopy were used to determine the structural characteristics of the paint layers and recognise the manufacturing technique. Analyses identified a fresco application for the Tomba dei Cavalieri (Arpi) and a dry application for the Canosian hypogea. The palette—typical for Hellenistic tomb painting in Southern Italy, Etruria and Macedonia—was composed of lime (white), charcoal (black), hematite (red), goethite (yellow), and Egyptian blue (blue). In the Tomba della Nike (Arpi), meanwhile, two particularly refined preparatory layers were observed. The palette was enriched with precious cinnabar and madder lake. The colouring components of the root were mixed with clay and K-alum applied on an additional layer of lime. The use of madder lake and a pink background link the painting to the polychrome Daunian pottery, and the contribution of a local workshop to the decoration of this tomb thus seems plausible. Full article

The Lot Sarcophagus is one of the most relevant funerary sculptures of late antiquity (mid-4th century AC). Some of the remarkable aspects are the following (i) it is still preserved in situ; (ii) most of the carved scenes are rarities or unicum; (iii) not all the sculpture work has been completed, which allows us to analyse the executive process; (iv) many traces of polychromy have remained. This paper is focused on the characterization of the residual polychromy by using in-situ non-invasive techniques. Furthermore, few micro samples were taken, to be analysed in laboratory to study the composition of some deposits and to define if a preparatory layer was present under the coloured layer. The data showed that the very rich polychromy of the Lot Sarcophagus was made of Egyptian blue, yellow ochre, and three different types of red: two inorganics (red ochre and cinnabar), and one organic-based (madder lake). Furthermore, some decorations, completely vanished and no longer visible to the naked eye, have been rediscovered, also providing details on the construction phases. During the project, the 3D model of the sarcophagus was acquired, which afterwards was used to map the results of the diagnostic campaign. Full article

The Hasti Afunei sarcophagus is a large Etruscan urn, made up of two chalky alabaster monoliths. Dated from the last quarter of the third century BC, it was found in 1826 in the small town of Chiusi (Tuscany- Il Colle place) by a landowner, Pietro Bonci Casuccini, who made it part of his private collection. The noble owner’s collection was sold in 1865 to the Royal Museum of Palermo (today under the name of Antonino Salinas Regional Archaeological Museum), where it is still displayed. The sarcophagus is characterized by a complex iconography that is meticulously illustrated through an excellent sculptural technique, despite having subjected to anthropic degradation and numerous restorative actions during the last century. During the restoration campaign carried out between 2016 and 2017, a targeted diagnostic campaign was carried out to identify the constituent materials of the artefact, the pigments employed and the executive technique, in order to get an overall picture of conservation status and conservative criticalities. In particular, this last intervention has allowed the use of the innovative micro-sampling technique, patented by the Cultural Heritage research group of Sapienza, in order to identify the employee of lake pigments through SERS analyses. Together with this analysis, Raman and NMR technique have completed the information requested by restorers, for what concerns the wax employed as protective layers, and allowed to rebuild the conservation history of the sarcophagus. In fact, together with the identification of red ocher and yellow ocher, carbon black, Egyptian blue and madder lake, pigments compatible with the historical period of the work, modern pigments (probably green Paris, chrome orange, barium yellow, blue phtalocyanine) have been recognized, attributable with not documented intervention during the eighteenth and twentieth centuries. Full article

Musical instrument coatings are generally made by multi-layered systems of organic and inorganic materials, applied on the wood substrate by the violin makers during the finishing process. This coating has paramount relevance for several aspects: protection from sweat and dirt, increase of specific acoustic features, and especially aesthetic effects. In fact, the colour of historical bowed string instruments represents a very peculiar characteristic of each workshop. Among the various colourants, lakes are the most challenging to detect because of their sensibility to the alteration processes. In this work, non-invasive and micro-invasive procedures were applied to a set of mock-ups mimicking historical coatings systems prior and after artificial ageing, in order to highlight the overall information that can be recovered for the detection of madder lake in historical bowed instruments. A set of techniques, including colourimetry, visible and UV-light imaging, stereomicroscopy, Fibre Optics Diffuse Reflectance spectroscopy (FORS), X-ray Fluorescence spectroscopy (XRF), Scanning Electron Microscopy coupled with Energy-Dispersive X-ray microprobe (SEM-EDX), and Fourier-Transform Infrared spectroscopy (FTIR) were used in order to evaluate the pros and cons in the detection of organic and inorganic component of madder lake at low concentration levels. Full article