Search Results (23)

One of the main limitations of photodynamic therapy (PDT) is hypoxia, which is caused by increased tumour proliferation creating a hypoxic tumour microenvironment (TME), as well as oxygen consumption by PDT. Hypoxia-activated prodrugs (HAPs), such as molecules containing aliphatic or aromatic N-oxide functionalities, are non-toxic prodrugs that are activated in hypoxic regions, where they are reduced into their cytotoxic form. The (oxido)pyridylporphyrins tested in this work were synthesised as potential HAPs from their AB₃ pyridylporphyrin precursors, using m-chloroperbenzoic acid (m-CPBA) as an oxidising reagent. Their ground-state and excited-state spectroscopic properties, singlet oxygen (¹O₂) production by the photodegradation of 1,3-diphenylisobenzofurane (DPBF) and theoretical lipophilicity were determined. In vitro analyses included cellular uptake, localisation and (photo)cytotoxicity under normoxia and CoCl₂-induced hypoxia. The CoCl₂ hypoxia model was used to reveal their properties, as related to HIF-1 activation and HIF-1α accumulation. (Oxido)pyridylporphyrins showed promising properties, such as the long lifetime of the excited triplet state, a high quantum yield of intersystem crossing, and high production of ROS/¹O₂. Lower cellular uptake resulted in an overall lower phototoxicity of these N-oxide porphyrins in comparison to their N-methylated analogues, and both porphyrin series were less active on CoCl₂-treated cells. (Oxido)pyridylporphyrins showed higher selectivity for pigmented melanoma cells, and the antioxidant activity of melanin pigment seemed to have a lower impact on their PDT activity compared to their N-methylated analogues in both CoCl₂-induced hypoxia and normoxia. Their potential HAP activity will be evaluated under conditions of reduced oxygen concentration in our future studies. Full article

Magnetic nanoparticles (MNPs) based on magnetite (Fe₃O₄) are attractive catalyst supports due to their high surface area, easy preparation, and facile separation, but they lack stability in acidic reaction media. The search for MNPs stable in oxidative acidic reaction media is a necessity if one wants to combine the advantages of MNPs as catalyst supports with those of iodine(III) reagents being environmentally benign oxidizers. In this work, immobilized iodophenyl organocatalysts on magnetite support (IMNPs) were obtained by crossed-linking polymerization of 4-iodostyrene with 1,4-divinylbenzene in the presence of MNPs. The obtained IMNPs were characterized by TGA, IR, SEM, STEM, and HAADF to gain information on catalyst morphology, average particle size (80–100 nm), and their core–shell structure. IMNP-catalysts tested in (i) the α-tosyloxylation of propiophenone 1 with meta-chloroperbenzoic acid (m-CPBA) and (ii) in the oxidation of 9,10-dimethoxyanthracene 3 with Oxone^® as the side-oxidant showed a similar performance as reactions using stoichiometric amounts of iodophenyl. The developed IMNPs withstand strong acidic conditions and serve as reusable organocatalysts. They are recyclable up to four times for repeated organocatalytic oxidations with rates of recovery of 80–92%. This is the first example of a—(4-iodophenyl)polystyrene shell—magnetite core-structured organocatalyst withstanding strong acidic reaction conditions. Full article

A simple and efficient approach to preparing highly efficient and reusable NiO@SBA-15 nanocatalysts for the oxidation of cyclohexane to produce ketone-alcohol (KA) oil was reported. These nanocatalysts were prepared by the dispersion of NiO NPs into SBA-15 using a coordination-assisted grafting method. In this approach, four commercially available nickel salts were immobilized into amino-functionalized SBA-15. After washing and calcination, four new nanocatalysts were obtained. The high dispersion of NiO NPs into SBA-15 was confirmed by HR-TEM and XRD. Different oxidants such as O₂, H₂O₂, t-butyl hydrogen peroxide (TBHP), and meta-Chloroperoxybenzoic acid (m-CPBA) were evaluated. However, m-CPBA exhibited the highest catalytic activity. Compared to different catalysts reported in the literature, for the first time, 75–99% of cyclohexane was converted to KA oil over NiO@SBA-15. In addition, the cyclohexane conversion and K/A ratio were affected by the reaction time, catalyst dose, Ni content, and NiO dispersion. Moreover, NiO@SBA-15 maintained a high catalytic activity during five successive cycles. Full article

The Baeyer-Villiger Oxidation (BVO) of ketones and aldehydes produce lactones and formates, while aerobic carboxylation of aldehydes manufactures carboxylic acids, both having high added value. This work prepared a series of Al-containing silicates modified with organic ligands and SnO₂ nanoparticles, which were then employed as catalyst in BVO and carboxylation. Characterizations revealed the morphology of the synthesized catalyst was changed from micron-sized thin sheets to smaller blocks, and then to uniform nanoparticles (size of 50 nm) having the doped SnO₂ nanoparticles with a size of 29 nm. All catalysts showed high BET surface areas featuring silt-like mesopores. In determining the priority of BVO and carboxylation, an influence evaluation of the parameters showed the order to be substrate > oxidant > solvent > catalyst. Cyclic aliphatic ketones were suitable for BVO, but linear aliphatic and aromatic aldehydes for carboxylation. Coordination of (S)-binaphthol or doping of Sn into catalyst showed little influence on BVO under m-CPBA, but the Sn-doped catalyst largely increased BVO under (NH₄)₂S₂O₈ and H₂O₂. Calculations revealed that the catalyst containing both Al and Sn could give BVO intermediates lower energies than the Sn-beta zeolite model. The present system exhibited merits including wider substrate scope, innocuous catalytic metal, greener oxidant, as well as lower catalyst cost. Full article

Non-heme manganese(II) complexes [(IndH)Mn^IICl₂] (1) and [(N4Py*)Mn^II(CH₃CN)](ClO₄)₂ (2) with tridentate isoindoline and pentadentate polypyridyl ligands (IndH = 1,3-bis(2′-pyridylimino)isoindoline; N4Py* = N,N-bis(2-pyridylmethyl)-1,2- di(2-pyridyl)ethylamine) proved to be suitable to catalyze the oxidative demethylation of N,N-dimethylaniline (DMA) with various oxidants such as tert-butyl hydroperoxide (TBHP), peracetic acid (PAA), and meta-chloroperoxybenzoic acid (mCPBA), resulting N-methylaniline (MA) as a main product with N-methylformanilide (MFA) as a result of a free-radical chain process under air. The effect of electron-donating and electron-withdrawing substituents on the aromatic ring on the relative reactivity of the substrates and on the product composition (MA/MFA) was also studied and showed a significant impact on the catalytic N-demethylation reaction. Based on the Hammett correlation with ρ = −0.38 (PAA), −0.45 (mCPBA), and −0.63 (TBHP) for 1 and ρ = −0.38 (PAA) and −0.37 (mCPBA) for 2, an electrophilic intermediate is suggested as the key oxidant. Furthermore, the spectral investigation (UV-Vis) resulted in direct evidence for the formation of a high-valent oxomanganese(IV) and a transient radical cation intermediate, p-Me-DMA^•+, suggesting that the initial step in the manganese-catalyzed oxidations is a fast electron-transfer between the amine and the high valent oxometal species. The mechanisms of the subsequent steps are discussed. Full article

The epoxidation process of semi-synthetic triterpenoids 2-methyl-3-oxo-19β,28-epoxy- 18α-olean-1-ene, and its allylic alcohol derivatives were examined. 1,2α-epoxide, as the main product, was found to be formed from the starting enone exposed to m-chloroperbenzoic acid (mCPBA). In the case of hydroxy-directed mCPBA-oxidation of triterpenic allyl alcohols and their 3α-alkyl-substituted derivatives, inversion of C1 and C2 asymmetric centers with the formation of 1,2β-epoxyalcohols took place. The synthesis of 2,3α-epoxides was fulfilled from 2,3-dialkyl-substituted C(3) allyl alcohols by the action of pyridinium chlorochromate under [1,3]-oxidative rearrangement conditions. The transformations brought about enabled chiral oleanane derivatives with an oxygen-containing substituent at the C1, C2, and C3 atoms to be obtained. The study also provides information on in silico PASS prediction of pharmacological effects and in vitro evaluation of the cytotoxic activity of the synthesized compounds. Full article

Nickel oxide powder was prepared by simple calcination of nickel nitrate hexahydrate at 500 °C for 5 h and used as a catalyst for the oxidation of cyclohexane to produce the cyclohexanone and cyclohexanol—KA oil. Molecular oxygen (O₂), hydrogen peroxide (H₂O₂), t-butyl hydrogen peroxide (TBHP) and meta-chloroperoxybenzoic acid (m-CPBA) were evaluated as oxidizing agents under different conditions. m-CPBA exhibited higher catalytic activity compared to other oxidants. Using 1.5 equivalent of m-CPBA as an oxygen donor agent for 24 h at 70 °C, in acetonitrile as a solvent, NiO powder showed exceptional catalytic activity for the oxidation of cyclohexane to produce KA oil. Compared to different catalytic systems reported in the literature, for the first time, about 85% of cyclohexane was converted to products, with 99% KA oil selectivity, including around 87% and 13% selectivity toward cyclohexanone and cyclohexanol, respectively. The reusability of NiO catalyst was also investigated. During four successive cycles, the conversion of cyclohexane and the selectivity toward cyclohexanone were decreased progressively to 63% and 60%, respectively, while the selectivity toward cyclohexanol was increased gradually to 40%. Full article

Selective catalytic functionalization of organic substrates using peroxides as terminal oxidants remains a challenge in modern chemistry. The high complexity of interactions between metal catalysts and organic peroxide compounds complicates the targeted construction of efficient catalytic systems. Among the members of the peroxide family, m-chloroperoxybenzoic acid (m-CPBA) exhibits quite complex behavior, where numerous reactive species could be formed upon reaction with a metal complex catalyst. Although m-CPBA finds plenty of applications in fine organic synthesis and catalysis, the factors that discriminate its decomposition routes under catalytic conditions are still poorly understood. The present review covers the advances in catalytic C–H oxidation and olefine epoxidation with m-CPBA catalyzed by mono- and polynuclear complexes of nickel, a cheap and abundant first-row transition metal. The reaction mechanisms are critically discussed, with special attention to the O–O bond splitting route. Selectivity parameters using recognized model hydrocarbon substrates are summarized and important factors that could improve further catalytic studies are outlined. Full article

A series of benzylidene-3-pyrrolines were prepared from chalcone derivatives, arylacetylene and sulfonamide via a three-step sequence without the isolation of intermediates. Typically, the reaction of 1,3-di-p-tolylprop-2-en-1-one with lithium phenylacetylide was followed by substitution with tosylamide and then silver-catalyzed 5-exo-dig cyclization to give N-tosyl-2-benzylidene-3,5-di-p-tolyl-2,5-dihydro-1H-pyrrole with a 86% yield. Furthermore, transformation to the corresponding substituted 3-pyrrolin-2-one and pyrrole by m-chloroperbenzoic acid (mcpba)-oxidation and acid-catalyzed aromatization, respectively, was investigated. Full article

Epoxidation of the C=C double bond in unsaturated norlignans derived from hydroxymatairesinol was studied. The intermediate epoxides were formed in up to quantitative conversions and were readily further transformed into tetrahydrofuran, aryltetralin, and butyrolactone products—in diastereomeric mixtures—through ring-closing reactions and intramolecular couplings. For epoxidation, the classical Prilezhaev reaction, using stoichiometric amounts of meta-chloroperbenzoic acid (mCPBA), was used. As an alternative method, a catalytic system using dimeric molybdenum-complexes [MoO₂L]₂ with ONO- or ONS-tridentate Schiff base ligands and aqueous tert-butyl hydroperoxide (TBHP) as oxidant was used on the same substrates. Although the epoxidation was quantitative when using the Mo-catalysts, the higher temperatures led to more side-products and lower yields. Kinetic studies were also performed on the Mo-catalyzed reactions. Full article

Methyl [S-phenyl 4-O-acetyl-2,3-di-O-benzyl-1-thio-α-d-mannopyranoside (R/S)_S-oxide] uronate was synthesised from a thioglycoside mannosyl uronate donor in a 98% yield. By using one equivalent of meta-chloroperbenzoic acid (m-CPBA) as the sulphur oxidant, a smooth conversion to the diastereomeric sulfoxide products was achieved. The product was fully characterized by ¹H, ¹³C and 2D NMR alongside MS analysis. Full article

During the synthesis of symmetrical dodeco-6,7-diuloses that are potential candidates for inhibition of glycosidases, an unanticipated epoxide-oxetane rearrangement was observed. A bicyclic sugar consisting of a glycal moiety and an anomeric esterified furanose was oxidized under epoxidation conditions (mCPBA/KF). The isolation of the pure epoxide was not possible since a rapid reversible conversion accompanied by the migration of the ester group took place and resulted in the formation of an unusual oxetane-bridged disaccharide scaffold. X-ray diffractometric structure elucidation and the suggested mechanism of the rearrangement are provided. Full article

Naturally occurring nootkatone, with reported insecticidal and acaricidal properties, has been used as a lead to generate molecular diversity and, consequently, new insect antifeedant and ixodicidal compounds. A total of 22 derivatives were generated by subjecting this molecule to several reactions including dehydrogenation with the iodine/DMSO system, oxidation with SeO₂, epoxidation with mCPBA, oxidation or carbon homologations of the α-carbonyl position with TMSOTf (trimethylsilyl trifluoromethanesulfonate) followed by Rubottom and Dess Martin periodane oxidations, condensation with formaldehyde using Yb(OTf)₃ as catalyst and dehydroxilation using the Grieco protocol. The insect antifeedant (against Myzus persicae and Ropaloshysum padi) and ixodicidal (against the tick Hyalomma lusitanicum) activities of these compounds were tested. Compound 20 was the most active substance against M. persicae and R. padi, and twice more efficient than nootkatone in the antitick test. Full article

Graphene oxide (GO) was used as a catalyst carrier, and after the hydroxyl group in GO was modified by 3-aminopropyltrimethoxysilane (MPTMS), axial coordination and immobilization with homogeneous chiral salenMnCl catalyst were carried out. The immobilized catalysts were characterized in detail by FT–IR, TG–DSC, XPS, EDS, SEM, X-ray, and AAS, and the successful preparation of GO-salenMn was confirmed. Subsequently, the catalytic performance of GO-salenMn for asymmetric epoxidation of α-methyl-styrene, styrene, and indene was examined, and it was observed that GO-salenMn could efficiently catalyze the epoxidation of olefins under an m-CPBA/NMO oxidation system. In addition, α-methyl-styrene was used as a substrate to investigate the recycling performance of GO-salenMn. After repeated use for three times, the catalytic activity and enantioselectivity did not significantly change, and the conversion was still greater than 99%. As the number of cycles increased, the enantioselectivity and chemoselectivity gradually decreased, but even after 10 cycles, the enantiomeric excess was 52%, which was higher than that of the homogeneous counterpart under the same conditions. However, compared to fresh catalysts, the yield decreased from 96.9 to 55.6%. Full article