Search Results (51)

This study evaluated the acaricidal effects of biosurfactants produced by Serratia ureilytica against the two-spotted spider mite Tetranychus urticae and their compatibility with the predatory mite Ambliseus swirski. The biosurfactants were obtained via liquid cultures of the bacterial strains. In the laboratory, T. urticae was exposed via acaricide-immersed leaves and A. swirskii via acaricide-coated glass vials. In the greenhouse, mite-infested plants were sprayed with the biosurfactants. In the laboratory, biosurfactants produced by S. ureilytica NOD-3 and UTS exhibited strong acaricidal activity, causing 95% mortality in adults and reducing egg viability by more than 60%. In the greenhouse trial, all biosurfactants significantly suppressed T. urticae populations at all evaluated periods (7, 14, and 21 days post-application). Gas chromatography–mass spectrometry (GC-MS) analysis of the biosurfactants identified several fatty acids, including hexadecanoic acid, pentanoic acid, octadecanoic acid, decanoic acid, and tetradecanoic acid, as well as the amino acids L-proline, L-lysine, L-valine, and glutamic acid. These fatty acids and amino acids are known structural components of lipopeptides. Furthermore, the bioinformatic analysis of the genomes of the three S. ureilytica strains revealed nonribosomal peptide synthetase (NRPS) gene clusters homologous to those involved in the biosynthesis of lipopeptides. These findings demonstrate that S. ureilytica biosurfactants are promising eco-friendly acaricides, reducing T. urticae populations by >95% while partially sparing A. swirskii. Full article

The increasing resistance of pathogenic microorganisms to antimicrobials has driven the search for safe and sustainable alternatives. In this context, microbial biosurfactants have gained prominence due to their antimicrobial activity, low toxicity, and high stability under extreme conditions. This study presents the production and characterization of a biosurfactant with antimicrobial potential, obtained from Bacillus subtilis isolated from soil, for application in the control of resistant strains. Bacterial identification was performed using mass spectrometry (MALDI-TOF), confirming it as Bacillus subtilis. The strain B. subtilis UCP 1533 was cultivated using different carbon sources (glucose, soybean oil, residual frying oil, and molasses) and nitrogen sources (ammonium chloride, sodium nitrate, urea, and peptone), with evaluations at 72, 96, and 120 h. The best condition involved a mineral medium supplemented with 2% soybean oil and 0.12% corn steep liquor, resulting in the production of 16 g·L⁻¹ of biosurfactant, with a critical micelle concentration (CMC) of 0.3 g·L⁻¹ and a reduction in water surface tension to 25 mN·m⁻¹. The biosurfactant showed an emulsification index of 100% for used motor oil and ranged from 50% to 100% for different vegetable oils, maintaining stability across a wide range of pH, salinity, and temperature. FT-IR and NMR analyses confirmed its lipopeptide nature and anionic charge. Toxicity tests with Tenebrio molitor larvae showed 100% survival at all the tested concentrations. In phytotoxicity assays, seed germination rates above 90% were recorded for Solanum lycopersicum and Lactuca sativa. Antimicrobial tests revealed inhibitory activity against resistant strains of Escherichia coli and Pseudomonas aeruginosa, as well as against species of the genus Candida (C. glabrata, C. lipolytica, C. bombicola, and C. guilliermondii), highlighting the biosurfactant as a promising alternative in combating antimicrobial resistance (AMR). These results indicate the potential application of this biosurfactant in the development of antimicrobial agents for pharmaceutical formulations and sustainable strategies for phytopathogen control in agriculture. Full article

Biosurfactants are becoming increasingly popular, but industrial production of biosurfactants is difficult, partly due to high production costs resulting from the need to use expensive substrates. One economically feasible candidate is vegetable oils, which can be directly metabolized without pretreatment. The aim of this work is therefore to investigate the possibility of using vegetable oils for lipopeptide production by Serratia marcescens G8-1. The genetic background of this strain for the production of lipopeptides was investigated using a genomic approach. The biosurfactants were analysed by Ultra-Performance Liquid Chromatography coupled with Electrospray Ionisation Mass Spectrometry. The ability to reduce surface tension was investigated using a tensiometer. The results showed that the best effect in reducing surface tension was achieved by adding waste rapeseed oil. Sunflower and linseed oil also showed good results. Significantly poorer results were obtained when fresh rapeseed oil, sesame oil and pumpkin seed oil were used. The putative gene cluster for cyclic lipopeptides NRPS was identified in the genome of S. marcescens G8-1. The results obtained confirmed that serrawettin W1 is the major biosurfactant produced by S. marcescens G8-1. Of particular interest, the results showed the presence of vinylamycin when rapeseed oil was used. Full article

Biosurfactants, amphiphilic metabolites produced by bacteria and yeasts, fulfill a variety of functions in microbial life. They exhibit a well-recognized multifunctionality, spanning from the reduction in surface tension to specific biological activities, including antimicrobial, antiviral, anti-inflammatory, and anticancer effects. These compounds have the potential to serve as environmentally friendly alternatives to synthetic surfactants in industrial formulations, where they could act as emulsifiers and wetting agents. The exploitation of their full potentiality could be a significant added value. Biosurfactants are often cited as effective antioxidants. However, experimental evidence for their antioxidant activity/capacity is sparse. To shed light on the subject, in this review we collect and critically examine all the available literature data for each of the major classes of microbial biosurfactants: rhamnolipids, mannosylerythritol lipids, sophorolipids, and lipopeptides. Despite the variability arising from the diverse composition and polydispersity of the samples analyzed, along with the variety of testing methodologies, the findings consistently indicate a moderate-to-strong antioxidant capacity. Several hypotheses are advanced about the molecular mechanisms behind this action; however, further studies are needed to gain a molecular understanding. This knowledge would fully define the biological roles of biosurfactants and is a prerequisite for the development of innovative formulations based on the valorization of their antioxidant properties. Full article

Flax (Linum usitatissimum) is a versatile plant used in a range of applications, from textiles to nutrition. Surfactin, a cyclic lipopeptide biosurfactant produced by bacteria such as Bacillus subtilis, has potential as a biocontrol agent or as a plant defense inducer in agriculture. This work aims to determine the effects of surfactin treatment at two kinetic points on the metabolism of flax hydroponic cultures, using advanced metabolomic techniques, including ¹H NMR and LC-MS analyses. Surfactin, detected in the roots, has a significant local impact on the metabolic profiles of flax roots, leading mainly to a higher content of cyanogenic compounds and amino acids and a lower content of carbohydrates. Surfactin, which is not detected in the aerial parts, also induces contrasted changes in amino acids, sugars, and secondary metabolite accumulation between stems and leaves. Surfactin treatment of flax leads to both a local and systemic effect on flax metabolism. These changes suggest that plant response to surfactin treatment could induce an enhanced plant defense. This could suggest potential applications of surfactin in the agricultural field as a biostimulant or biocontrol agent, to limit the use of chemical compounds in culture, and to limit their negative impact on both health and the environment. Full article

Polymeric nanoparticles (PNPs) are highly valuable across various industries due to their advantageous properties, including biocompatibility and enhanced release control, which are particularly important for pharmaceutical and cosmetic applications. Fungi, through secondary metabolism, are capable of producing biosurfactants (BSs)—amphiphilic molecules that reduce surface tension and can therefore substitute synthetic surfactants in PNP stabilization. In this study, we investigated the production of biosurfactants by the endophytic fungus Aspergillus welwitschiae CG2-16, isolated from the Amazon region, as well as its use as a PNP stabilizer. The fungus exhibited a 36% reduction in the surface tension of the culture medium during growth, indicative of BS production. The partially purified biosurfactant demonstrated an emulsification of 24%, a critical micelle concentration (CMC) of 280 mg/L, and an FTIR spectrum suggesting a lipopeptide composition. The biosurfactant was employed in the synthesis of poly-ε-caprolactone (PCL) nanoparticles via nanoprecipitation and emulsion/diffusion methods. Nanoprecipitation yielded spherical nanoparticles with a low polydispersity index (0.14 ± 0.04) and a high zeta potential (−29.10 ± 8.70 mV), indicating suspension stability. These findings highlight the significant role of biosurfactants in polymeric nanoparticle formation and stabilization, emphasizing their potential for diverse applications in pharmaceutical, cosmetic, and other industrial sectors. Full article

Surfactin, a potent biosurfactant produced by Bacillus subtilis, is synthesized using a non-ribosomal peptide synthetase (NRPS) encoded by the srfAA-AD operon. Despite its association with quorum sensing via the ComX pheromone, the dynamic behavior and in vivo quantification of the NRPS complex remain underexplored. This study established an in vivo quantification system using fluorescence labeling to monitor the availability of surfactin-forming NRPS subunits (SrfAA, SrfAB, SrfAC, and SrfAD) during bioprocesses. Four Bacillus subtilis sensor strains were constructed by fusing these subunits with the megfp gene, resulting in strains BMV25, BMV26, BMV27, and BMV28. These strains displayed growth and surfactin productivity similar to those of the parental strain, BMV9. Fluorescence signals indicated varying NRPS availability, with BMV27 showing the highest and BMV25 showing the lowest relative fluorescence units (RFUs). RFUs were converted to the relative number of NRPS molecules using open-source FPCountR package. During bioprocesses, NRPS availability peaked at the end of the exponential growth phase and declined in the stationary phase, suggesting reduced NRPS productivity under nutrient-limited conditions and potential post-translational regulation. This study provides a quantitative framework for monitoring NRPS dynamics in vivo, offering insights into optimizing surfactin production. The established sensor strains and quantification system enable the real-time monitoring of NRPS availability, aiding bioprocess optimization for industrial applications of surfactin and potentially other non-ribosomal peptides. Full article

Antibacterial resistance is one of the most important global threats to human health. Several studies have been performed to overcome this problem and infection-preventive approaches appear as promising solutions. Novel antimicrobial preventive molecules are needed and microbial biosurfactants have been explored in that scope. Considering their structure, these biomolecules can be divided into different classes, glycolipids and lipopeptides being the most studied. Besides their antimicrobial activity, biosurfactants have the advantage of being biocompatible, biodegradable, and non-toxic, which favor their application in several areas, including the health sector. Often, the most difficult infections to fight are associated with biofilm formation, particularly in medical devices. Strategies to overcome micro-organism attachment are thus emergent, and it is possible to take advantage of the antimicrobial/antibiofilm properties of biosurfactants to produce surfaces that are more resistant to the deposition/attachment of bacteria. Approaches such as the covalent bond of biosurfactants to the medical device surface leading to repulsive physical–chemical interactions or contact killing can be selected. Simpler strategies such as the absorption of biosurfactants on surfaces are also possible, eliminating micro-organisms in the vicinity. This review will focus on the physical and chemical characteristics of biosurfactants, their antimicrobial activity, antimicrobial/antibiofilm approaches, and finally on their structure–activity relationship. Full article

In a scenario of increasing alarm about food waste due to rapid urbanization, population growth and lifestyle changes, this study aims to explore the valorization of waste from the retail sector as potential substrates for the biotechnological production of biosurfactants. With a perspective of increasingly contributing to the realization of the circular bioeconomy, a vegetable juice, derived from unsold fruits and vegetables, as a carbon source was used to produce lipopeptides such as surfactin and fengycin. The results from the shake flask cultivations revealed that different concentrations of vegetable juice could effectively serve as carbon sources and that the fed-batch bioreactor cultivation strategy allowed the yields of lipopeptides to be significantly increased. In particular, the product/substrate yield of 0.09 g/g for surfactin and 0.85 mg/g for fengycin was obtained with maximum concentrations of 2.77 g/L and 27.53 mg/L after 16 h, respectively. To conclude, this study provides the successful fed-batch cultivation of B. subtilis using waste product as the carbon source to produce secondary metabolites. Therefore, the consumption of agricultural product wastes might be a promising source for producing valuable metabolites which have promising application potential to be used in several fields of biological controls of fungal diseases. Full article

Surfactants, also known as surface-active agents, have emerged as an important class of compounds with a wide range of applications. However, the use of chemical-derived surfactants must be restricted due to their potential adverse impact on the ecosystem and the health of human and other living organisms. In the past few years, there has been a growing inclination towards natural-derived alternatives, particularly microbial surfactants, as substitutes for synthetic or chemical-based counterparts. Microbial biosurfactants are abundantly found in bacterial species, predominantly Bacillus spp. and Pseudomonas spp. The chemical structures of biosurfactants involve the complexation of lipids with carbohydrates (glycolipoproteins and glycolipids), peptides (lipopeptides), and phosphates (phospholipids). Lipopeptides, in particular, have been the subject of extensive research due to their versatile properties, including emulsifying, antimicrobial, anticancer, and anti-inflammatory properties. This review provides an update on research progress in the classification of surfactants. Furthermore, it explores various bacterial biosurfactants and their functionalities, along with their advantages over synthetic surfactants. Finally, the potential applications of these biosurfactants in many industries and insights into future research directions are discussed. Full article

Currently, microbial enhanced oil recovery (MEOR) is of great interest because of its potential high efficiency and low environmental impact. Biosurfactants, in the purified form or contained in the bacterial cultural media, are one of the promising directions in MEOR because they are more stable in response to different environmental factors than life microorganisms are. However, the extraction and purification of biosurfactants, as well as their working concentrations and efficacy in real oilfield conditions remain a challenge. In the present work, cultural media of two novel bacterial isolates (Bacillus pumilus and Peribacillus simplex) were used in a model experiment with sand pack columns to enhance the recovery of heavy oil from Romashkino oilfield (Russia). Using FTIR and TLC methods, it was demonstrated that both cultural media contained lipopeptides. In the genome of both bacterial isolates, genes srfAA, fenD and bamC encoding synthesis of surfactin, fengycin, and bacillomycin, respectively, were revealed. The oil recovery efficacy of cell-free cultural media after 24 h of cultivation was 34% higher and 16% lower as compared with synthetic surfactant for B. pumilus and P. simplex, respectively. It can be concluded that the high-cost step of biosurfactants separation and purification may be excluded, and cell free cultural media of the isolates may be directly used in field conditions to enhance the recovery of heavy oils. Full article

This comprehensive review examines iturin, a cyclic lipopeptide originating from Bacillus subtilis and related bacteria. These compounds are structurally diverse and possess potent inhibitory effects against plant disease-causing bacteria and fungi. Notably, Iturin A exhibits strong antifungal properties and low toxicity, making it valuable for bio-pesticides and mycosis treatment. Emerging research reveals additional capabilities, including anticancer and hemolytic features. Iturin finds applications across industries. In food, iturin as a biosurfactant serves beyond surface tension reduction, enhancing emulsions and texture. Biosurfactants are significant in soil remediation, agriculture, wound healing, and sustainability. They also show promise in Microbial Enhanced Oil Recovery (MEOR) in the petroleum industry. The pharmaceutical and cosmetic industries recognize iturin’s diverse properties, such as antibacterial, antifungal, antiviral, anticancer, and anti-obesity effects. Cosmetic applications span emulsification, anti-wrinkle, and antibacterial use. Understanding iturin’s structure, synthesis, and applications gains importance as biosurfactant and lipopeptide research advances. This review focuses on emphasizing iturin’s structural characteristics, production methods, biological effects, and applications across industries. It probes iturin’s antibacterial, antifungal potential, antiviral efficacy, and cancer treatment capabilities. It explores diverse applications in food, petroleum, pharmaceuticals, and cosmetics, considering recent developments, challenges, and prospects. Full article

Bacillus licheniformis produces several classes of antimicrobial substances, including bacteriocins, which are peptides or proteins with different structural composition and molecular mass: ribosomally synthesized by bacteria (1.4–20 kDa), non-ribosomally synthesized peptides and cyclic lipopeptides (0.8–42 kDa) and exopolysaccharides (>1000 kDa). Different bacteriocins act against Gram-positive or Gram-negative bacteria, fungal pathogens and amoeba cells. The main mechanisms of bacteriocin lytic activity include interaction of peptides with membranes of target cells resulting in structural alterations, pore-forming, and inhibition of cell wall biosynthesis. DNase and RNase activity for some bacteriocines are also postulated. Non-ribosomal peptides are synthesized by special non-ribosomal multimodular peptide synthetases and contain unnatural amino acids or fatty acids. Their harmful effect is due to their ability to form pores in biological membranes, destabilize lipid packaging, and disrupt the peptidoglycan layer. Lipopeptides, as biosurfactants, are able to destroy bacterial biofilms. Secreted polysaccharides are high molecular weight compounds, composed of repeated units of sugar moieties attached to a carrier lipid. Their antagonistic action was revealed in relation to bacteria, viruses, and fungi. Exopolysaccharides also inhibit the formation of biofilms by pathogenic bacteria and prevent their colonization on various surfaces. However, mechanism of the harmful effect for many secreted antibacterial substances remains unknown. The antimicrobial activity for most substances has been studied in vitro only, but some substances have been characterized in vivo and they have found practical applications in medicine and veterinary. The cyclic lipopeptides that have surfactant properties are used in some industries. In this review, special attention is paid to the antimycobacterials produced by B. licheniformis as a possible approach to combat multidrug-resistant and latent tuberculosis. In particular, licheniformins and bacitracins have shown strong antimycobacterial activity. However, the medical application of some antibacterials with promising in vitro antimycobacterial activity has been limited by their toxicity to animals and humans. As such, similar to the enhancement in the antimycobacterial activity of natural bacteriocins achieved using genetic engineering, the reduction in toxicity using the same approach appears feasible. The unique capability of B. licheniformis to synthesize and produce a range of different antibacterial compounds means that this organism can act as a natural universal vehicle for antibiotic substances in the form of probiotic cultures and strains to combat various types of pathogens, including mycobacteria. Full article

In this study, the antifungal, biosurfactant and bioemulsifying activity of the lipopeptides produced by the marine bacterium Bacillus subtilis subsp. spizizenii MC6B-22 is presented. The kinetics showed that at 84 h, the highest yield of lipopeptides (556 mg/mL) with antifungal, biosurfactant, bioemulsifying and hemolytic activity was detected, finding a relationship with the sporulation of the bacteria. Based on the hemolytic activity, bio-guided purification methods were used to obtain the lipopeptide. By TLC, HPLC and MALDI-TOF, the mycosubtilin was identified as the main lipopeptide, and it was further confirmed by NRPS gene clusters prediction based on the strain’s genome sequence, in addition to other genes related to antimicrobial activity. The lipopeptide showed a broad-spectrum activity against ten phytopathogens of tropical crops at a minimum inhibitory concentration of 400 to 25 μg/mL and with a fungicidal mode of action. In addition, it exhibited that biosurfactant and bioemulsifying activities remain stable over a wide range of salinity and pH and it can emulsify different hydrophobic substrates. These results demonstrate the potential of the MC6B-22 strain as a biocontrol agent for agriculture and its application in bioremediation and other biotechnological fields. Full article

Biosurfactants are amphipathic molecules capable of lowering interfacial and superficial tensions. Produced by living organisms, these compounds act the same as chemical surfactants but with a series of improvements, the most notable being biodegradability. Biosurfactants have a wide diversity of categories. Within these, lipopeptides are some of the more abundant and widely known. Protein-containing biosurfactants are much less studied and could be an interesting and valuable alternative. The harsh temperature, pH, and salinity conditions that target organisms can sustain need to be understood for better implementation. Here, we will explore biotechnological applications via lipopeptide and protein-containing biosurfactants. Also, we discuss their natural role and the organisms that produce them, taking a glimpse into the possibilities of research via meta-omics and machine learning. Full article