Search Results (101)

This review synthesized the current knowledge on the effect of TiO₂ photocatalysts on the degradation of microplastics (MPs) and nanoplastics (NPs) under visible light, highlighting the state-of-the-art techniques, main challenges, and proposed solutions for enhancing the performance of the photocatalysis technique. The synthesis of TiO₂-based photocatalysts and hybrid nanostructured TiO₂ materials, including those coupled with other semiconductor materials, is explored. Studies on TiO₂-based photocatalysts for the degradation of MPs and NPs under visible light remain limited. The degradation behavior is influenced by the composition of the TiO₂ composites and the nature of different types of MPs/NPs. Polystyrene (PS) MPs demonstrated complete degradation under visible light photocatalysis in the presence of α-Fe₂O₃ nanoflowers integrated into a TiO₂ film with a hierarchical structure. However, photocatalysis generally fails to achieve the full degradation of small plastic pollutants at the laboratory scale, and its overall effectiveness in breaking down MPs and NPs remains comparatively limited. Full article

Several benzothiazole (BT) derivatives have recently been explored in medicinal chemistry, and they are frequently reported in the literature. The interest in this kind of heterocyclic compounds and their structural hybrids has been increasing, as shown by several reviews reported over the last decade. In this context, we found that about 70 articles related to the synthesis of BT derivatives that studied their biological activities were published in the last five years. From this, we prepared a review on the synthesis and biological activity studies about this topic. In this bibliographic review it was found that medicinal chemists also explore BT derivatives in search of anticancer and anti-Alzheimer’s candidates. This review comprehends 70 articles, published between 2020 and 2024, related to the synthesis of BT derivatives with the purpose of assessing their biological activities. On the other hand, BT derivatives have been explored as molecular species that perform two or more biological actions, called multifunctional drugs. Some accounts related to the structure–activity relationship which provide a framework for drug discovery and design are also discussed. The synthetic methods of BT synthesis include the use of biocatalysts, solvent-free conditions, photocatalysts, and catalysts supported on nanoparticles. Studies also explore renewable energy sources such as microwave, UV, and visible-light and mechanochemical sources. Full article

Photocatalytic hydrogen (H₂) production offers a promising solution to energy shortages and environmental challenges by converting solar energy into chemical energy. Hydrogen, as a versatile energy carrier, can be generated through photocatalysis under sunlight or via electrolysis powered by solar or wind energy. However, the advancement of photocatalysis is hindered by the limited availability of effective visible light-responsive semiconductors and the challenges of charge separation and transport. To address these issues, researchers are focusing on the development of novel nanostructured semiconductors and composite materials that can enhance photocatalytic performance. In this paper, we provide an overview of the advanced photocatalytic materials prepared so far that can be activated by sunlight, and their efficiency in H₂ production. One of the key strategies in this research area concerns improving the separation and transfer of electron–hole pairs generated by light, which can significantly boost H₂ production. Advanced hybrid materials, such as organic–inorganic hybrid composites consisting of a combination of polymers with metal oxide photocatalysts, and the creation of heterojunctions, are seen as effective methods to improve charge separation and interfacial interactions. The development of Schottky heterojunctions, Z-type heterojunctions, p–n heterojunctions from nanostructures, and the incorporation of nonmetallic atoms have proven to reduce photocorrosion and enhance photocatalytic efficiency. Despite these advancements, designing efficient semiconductor-based heterojunctions at the atomic scale remains a significant challenge for the realization of large-scale photocatalytic H₂ production. In this review, state-of-the-art advancements in photocatalytic hydrogen production are presented and discussed in detail, with a focus on photocatalytic nanostructures, heterojunctions and hybrid composites. Full article

Heterogeneous photocatalysis has emerged as a versatile and sustainable technology for the degradation of emerging contaminants in water. This review highlights recent advancements in photocatalysts design, including band gap engineering, heterojunction formation, and plasmonic enhancement to enable visible-light activation. Various reactor configurations, such as slurry, immobilized, annular, flat plate, and membrane-based systems, are examined in terms of their efficiency, scalability, and operational challenges. Hybrid systems combining photocatalysis with membrane filtration, adsorption, Fenton processes, and biological treatments demonstrate improved removal efficiency and broader applicability. Energy performance metrics such as quantum yield and electrical energy per order are discussed as essential tools for evaluating system feasibility. Special attention is given to solar-driven reactors and smart responsive materials, which enhance adaptability and sustainability. Additionally, artificial intelligence and machine learning approaches are explored as accelerators for catalyst discovery and process optimization. Altogether, these advances position photocatalysis as a key component in future water treatment strategies, particularly in decentralized and low-resource contexts. The integration of material innovation, system design, and data-driven optimization underlines the potential of photocatalysis to contribute to global efforts in environmental protection and sustainable development. Full article

We combined atomistic simulations and experiments to assess the photocatalytic potential of the rutile phase of ${\mathrm{TiO}}_2$ combined with phenyl-modified carbon nitride (PhCN). Density Functional Tight Binding (DFTB) calculations predict favorable adhesion properties and type-II band alignment, crucial for efficient charge separation between PhCN and rutile TiO₂ surfaces. These theoretical predictions are validated experimentally: structural (XRD and Raman) and optical characterizations confirm the successful formation of a PhCN/rutile hybrid and indicate beneficial electronic interactions. Importantly, photocatalytic tests under visible light reveal significant degradation activity, confirming that the computationally predicted synergistic effects render the PhCN/rutile system a promising, potentially greener alternative to traditional anatase-based photocatalysts. Full article

The increasing presence of persistent pollutants in industrial wastewater underscores the shortcomings of conventional treatment methods, prompting the adoption of advanced oxidation processes (AOPs) for sustainable water remediation. This review examines the development of AOPs, focusing on their ability to produce hydroxyl radicals and reactive oxygen species (ROS) to mineralize complex pollutants. Homogeneous systems such as Fenton’s reagent show high degradation efficiency. However, challenges like pH sensitivity, catalyst recovery issues, sludge generation, and energy-intensive operations limit their scalability. Heterogeneous catalysts, such as TiO₂-based photocatalysts and Fe₃O₄ composites, offer improved pH adaptability, visible-light activation, and recyclability. Emerging innovations like ultraviolet light emitting diode (UV-LED)-driven systems, plasma-assisted oxidation, and artificial intelligence (AI)-enhanced hybrid reactors demonstrate progress in energy efficiency and process optimization. Nevertheless, key challenges remain, including secondary byproduct formation, mass transfer constraints, and economic feasibility for large-scale applications. Integrating AOPs with membrane filtration or biological treatments enhances treatment synergy, while advances in materials science and computational modeling refine catalyst design and reaction mechanisms. Addressing barriers in energy use, catalyst durability, and practical adaptability requires multidisciplinary collaboration. This review highlights AOPs as pivotal solutions for water security amid growing environmental pollution, urging targeted research to bridge gaps between laboratory success and real-world implementation. Full article

A hybrid material composed of IRMOF-3 and ZnO (IRMOF-3/ZnO) was synthesized to enhance photocatalytic methylene blue (MB) degradation under visible-light irradiation. Scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, and diffuse-reflectance UV-Vis analyses confirmed the successful integration of ZnO into the IRMOF-3 framework. Compared with unmodified IRMOF-3, the hybrid demonstrated superior MB decomposition, as evidenced by faster reaction rate constants and shorter half-lives. Monitoring the MB absorbance at 670 nm (λ_max) revealed more pronounced colorant removal when IRMOF-3/ZnO was exposed to a visible-light source. Diffuse-reflectance UV-Vis spectroscopy showed that IRMOF-3 has a band gap of 2.7 eV, whereas IRMOF-3/ZnO exhibits a slightly higher band gap of 2.8 eV. This modest shift, coupled with the strong interaction between the ZnO semiconductor and the MOF’s amine functionalities, enabled two distinct energy-transfer pathways: intermolecular transfer from IRMOF-3 linkers (acting as visible-light antennas) to ZnO, and intramolecular transfer from Zn to IRMOF-3. Together, these pathways generated abundant free radicals for efficient dye degradation. Despite the necessity for careful synthesis protocols and control of operating conditions to preserve the MOF structure and optimize ZnO loading, the IRMOF-3/ZnO hybrid shows promise as a robust, cost-effective photocatalyst for water-pollutant remediation, taking advantage of the more abundant visible region of solar light. Full article

In this study, the synthesis of hybrid photocatalysts of Zn-Al-In mixed metal oxides were activated by using visible light, derived from Zn-Al-In layered double hydroxide (ZnAlIn-LDH), and these nanocomposites demonstrated high efficiency for photocatalytic H₂ production under UV light when using methanol as a sacrificial agent. The most active photocatalytic material produced 372 μmol h⁻¹ g⁻¹ of H₂. The characterization of these materials included X-ray diffraction (DRX), infrared spectroscopy (FTIR), X-ray fluorescence spectroscopy (XRF), X-ray spectroscopy (XEDS), scanning electron microscopy analysis (SEM), transmission electron microscopy (TEM), diffuse reflectance spectroscopy, and N₂- physisorption. In addition, the materials were characterized by photoelectrochemical techniques to explain the photocatalytic behavior. Subsequently, the photocatalytic performance for the water-splitting reactions under visible irradiation was evaluated. The ZnAlIn-MMOs with an In/(Al + In) molar ratio of 0.45 exhibited the highest photocatalytic activity in tests under visible light, attributed to the efficient separation and transport of photogenerated charge carriers originating from the new nanocomposite. This discovery indicates a method for developing new types of heteronanostructured photocatalysts which are activated by visible light. Full article

Photoactive artificial nanocatalysts that mimic natural photoenergy systems can yield clean and renewable energy. However, their poor photoabsorption capability and disfavored photogenic electron–hole recombination hinder their production. Herein, we designed two nanocatalysts with various microstructures by combining the tailored self-assembly of the meso-tetra(p-hydroxyphenyl) porphine photosensitizer with the growth of titanium dioxide (TiO₂). The porphyrin photoabsorption antenna efficiently extended the absorption range of TiO₂ in the visible region, while anatase TiO₂ promoted the efficient electron–hole separation of porphyrin. The photo-induced electrons were transferred to the surface of the Pt co-catalyst for the generation of hydrogen via water splitting, and the hole was utilized for the decomposition of methyl orange dye. The hybrid structure showed greatly increased photocatalytic performance compared to the core@shell structure due to massive active sites and increased photo-generated electron output. This controlled assembly regulation provides a new approach for the fabrication of advanced, structure-dependent photocatalysts. Full article

Heterostructures of visible light-absorbing semiconductors were prepared through the growth of ZnIn₂S₄ crystallites in the presence of CdS nanostructures. A variety of hybrid compositions was synthesized. Both reference samples and heterostructured materials were characterized in detail, regarding their morphology, crystalline character, chemical speciation, as well as vibrational properties. The abovementioned physicochemical characterization suggested the absence of doping phenomena, such as the integration of either zinc or indium ions into the CdS lattice. At specific compositions, the growth of the amorphous ZnIn₂S₄ component was observed through both XRD and Raman analysis. The development of heterojunctions was found to be composition-dependent, as indicated by the simultaneous recording of the Raman profiles of both semiconductors. The optical band gaps of the hybrids range at values between the corresponding band gaps of reference semiconductors. The photocatalytic activity was assessed in both organic dye degradation and hydrogen peroxide evolution. It was observed that the hybrids demonstrating efficient photocatalytic activity in dye degradation were rather poor photocatalysts for hydrogen peroxide evolution. Specifically, the hybrids enriched in the CdS component were shown to act efficiently for hydrogen peroxide evolution, whereas ZnIn₂S₄-enriched hybrids demonstrated high potential to photodegrade an azo-type organic dye. Furthermore, scavenging experiments suggested the involvement of singlet oxygen in the mechanistic path for dye degradation. Full article

A binary Fe₂O₃/Fe₃O₄ mixed nanocomposite was prepared by phyto-mediated avenue to be suited in the photo-Fenton photodegradation of methylene blue (MB) in the presence of H₂O₂. XRD and SEM analyses illustrated that Fe₂O₃ nanoparticles of average crystallite size 8.43 nm were successfully mixed with plate-like aggregates of Fe₃O₄ with a 15.1 nm average crystallite size. Moreover, SEM images showed a porous morphology for the binary Fe₂O₃/Fe₃O₄ mixed nanocomposite that is favorable for a photocatalyst. EDX and elemental mapping showed intense iron and oxygen peaks, confirming composite purity and symmetrical distribution. FTIR analysis displayed the distinct Fe-O assignments. Moreover, the isotherm of the developed nanocomposite showed slit-shaped pores in loose particulates within plate-like aggregates and a mesoporous pore-size distribution. Thermal gravimetric analysis (TGA) indicated the high thermal stability of the prepared Fe₂O₃/Fe₃O₄ binary nanocomposite. The optical properties illustrated a narrowing in the band gab (Eg = 2.92 eV) that enabled considerable absorption in the visible region of solar light. Suiting the developed binary Fe₂O₃/Fe₃O₄ nanocomposite in the photo-Fenton reaction along with H₂O₂ supplied higher productivity of active oxidizing species and accordingly a higher degradation efficacy of MB. The solar-driven photodegradation reactions were conducted and the estimated rate constants were 0.002, 0.0047, and 0.0143 min⁻¹ when using the Fe₂O₃/Fe₃O₄ nanocomposite, pure H₂O₂, and the Fe₂O₃/Fe₃O₄/H₂O₂ hybrid catalyst, respectively. Therefore, suiting the developed binary Fe₂O₃/Fe₃O₄ nanocomposite and H₂O₂ in photo-Fenton reaction supplied higher productivity of active oxidizing species and accordingly a higher degradation efficacy of MB. After being subjected to four photo-Fenton degradation cycles, the Fe₂O₃/Fe₃O₄ nanocomposite catalyst still functioned admirably. Further evaluation of Fe₂O₃/Fe₃O₄ nanocomposite in photocatalytic remediation of contaminated water using a mixture of MB and pyronine Y (PY) dyestuffs revealed substantial dye photodegradation efficiencies. Full article

The synthesis of the accurate composition and morphological/structural design of multielement semiconductor materials is considered an effective strategy for obtaining high-performance hybrid photocatalysts. Herein, sulfur vacancy (Vs)-bearing In₂S₃/CuInS₂ microflower heterojunctions (denoted Vs-In₂S₃/CuInS₂) were formed in situ using In₂S₃ microsphere template-directed synthesis and a metal ion exchange-mediated growth strategy. Photocatalysts with flower-like microspheres can be obtained using hydrothermally synthesized In₂S₃ microspheres as a template, followed by Ostwald ripening growth during the metal cation exchange of Cu⁺ and In³⁺. The optimal heterostructured Vs-In₂S₃/CuInS₂ microflowers exhibited CO and CH₄ evolution rates of 80.3 and 11.8 μmol g⁻¹ h⁻¹, respectively, under visible-light irradiation; these values are approximately 4 and 6.8 times higher than those reported for pristine In₂S₃, respectively. The enhanced photocatalytic performance of the Vs-In₂S₃/CuInS₂ catalysts could be attributed to the synergistic effects of the following factors: (i) the constructed heterojunctions accelerate charge-carrier separation; (ii) the flower-like microspheres exhibit highly uniform morphologies and compositions, which enhance electron transport and light harvesting; and (iii) the vs. may trap excited electrons and, thus, inhibit charge-carrier recombination. This study not only confirms the feasibility of the design of heterostructures on demand, but also presents a simple and efficient strategy to engineer metal sulfide photocatalysts with enhanced photocatalytic performance. Full article

Photocatalysis based on titanium dioxide (TiO₂) has become a promising method to remediate industrial and municipal effluents in an environmentally friendly manner. However, the efficiency of TiO₂ is hampered by problems such as rapid electron–hole recombination and limited solar spectrum absorption. Furthermore, the sensitization of TiO₂ through heterojunctions with other materials has gained attention. Vanadium, specifically in the form of ammonium vanadate ((NH₄)₂V₃O₈), has shown promise as a photocatalyst due to its ability to effectively absorb visible light. However, its use in photocatalysis remains limited. Herein, we present a novel synthesis method to produce lamellar (NH₄)₂V₃O₈ as a sensitizer in a supramolecular hybrid photocatalyst of TiO₂–stearic acid (SA), contributing to a deeper understanding of its structural and magnetic characteristics, expanding the range of visible light absorption, and improving the efficiency of photogenerated electron–hole separation. Materials, such as TiO₂–SA and (NH₄)₂V₃O₈, were synthesized and characterized. EPR studies of (NH₄)₂V₃O₈ demonstrated their orientation-dependent magnetic properties and, from measurements of the angular variation of g-values, suggest that the VO₂⁺ complexes are in axially distorted octahedral sites. The photocatalytic results indicate that the 2D/2D heterojunction layered TiO₂/vanadate at a ratio (1:0.050) removed 100% of the methylene blue, used as a model contaminant in this study. The study of the degradation mechanism of methylene blue emphasizes the role of reactive species such as hydroxyl radicals (^•OH) and superoxide ions (O₂^•−). These species are crucial for breaking down contaminant molecules, leading to their degradation. The band alignment between ammonium vanadate ((NH₄)₂V₃O₈) and TiO₂–SA, shows effective separation and charge transfer processes at their interface. Furthermore, the study confirms the chemical stability and recyclability of the TiO₂–SA/(NH₄)₂V₃O₈ photocatalyst, demonstrated that it could be used for multiple photocatalytic cycles without a significant loss of activity. This stability, combined with its ability to degrade organic pollutants under solar irradiation, means that the TiO₂–SA/(NH₄)₂V₃O₈ photocatalyst is a promising candidate for practical environmental remediation applications. Full article

In response to the vital requirement for renewable energy alternatives, this research delves into the complex interactions between ruthenium (Ru₃) clusters and rutile titanium dioxide (TiO₂) (110) interfaces, with the aim of enhancing photocatalytic water splitting processes to produce environmentally friendly hydrogen. As the world shifts away from traditional fossil fuels, this study utilizes the density functional theory (DFT) and the HSE06 hybrid functional to thoroughly assess the geometric and electronic properties of Ru₃ clusters on rutile TiO₂ (110) surfaces. Given TiO₂’s renown role as a photocatalyst and its limitations in visible light absorption, this research investigates the potential of metals like Ru to serve as additional catalysts. The results indicate that the triangular Ru₃ cluster exhibits exceptional stability and charge transfer effectiveness when loaded on rutile TiO₂ (110). Under ideal adsorption scenarios, the cluster undergoes oxidation, leading to subsequent changes in the electronic configuration of TiO₂. Further exploration into TiO₂ surfaces with defects shows that Ru₃ clusters influence the creation of oxygen vacancies, resulting in a greater stabilization of TiO₂ and an increase in the energy required for creating oxygen vacancies. Moreover, the attachment of the Ru₃ cluster and the creation of oxygen vacancies lead to the emergence of polaronic and hybrid states centered on specific titanium atoms. These states are vital for enhancing the photocatalytic performance of the material within the visible light spectrum. This DFT study provides essential insights into the role of Ru₃ clusters as potential supplementary catalysts in TiO₂-based photocatalytic systems, setting the stage for practical experiments and the development of highly efficient photocatalysts for sustainable hydrogen generation. The observed effects on electronic structures and oxygen vacancy generation underscore the intricate relationship between Ru₃ clusters and TiO₂ interfaces, offering a valuable direction for future research in the pursuit of clean and sustainable energy solutions. Full article

Addressing the urgent need for sustainable energy sources, this study investigates the intricate relationship between rhodium (Rh₅) nanoclusters and TiO₂ rutile (110) surfaces, aiming to advance photocatalytic water splitting for green hydrogen production. Motivated by the imperative to transition from conventional fossil fuels, this study employs density functional theory (DFT) with DFT-D3 and HSE06 hybrid functionals to analyse the geometrical stabilities and electronic structures of Rh₅ nanoclusters on TiO₂ rutile (110). TiO₂, a prominent photocatalyst, faces challenges such as limited visible light absorption, leading researchers to explore noble metals like Rh as cocatalysts. Our results show that bipyramidal Rh₅ nanoclusters exhibit enhanced stability and charge transfer when adsorbed on TiO₂ rutile (110) compared to trapezoidal configurations. The most stable adsorption induces the oxidation of the nanocluster, altering the electronic structure of TiO₂. Extending the analysis to defective TiO₂ surfaces, this study explores the impact of Rh₅ nanoclusters on oxygen vacancy formation, revealing the stabilisation of TiO₂ and increased oxygen vacancy formation energy. This theoretical exploration contributes insights into the potential of Rh₅ nanoclusters as efficient cocatalysts for TiO₂-based photocatalytic systems, laying the foundation for experimental validations and the rational design of highly efficient photocatalysts for sustainable hydrogen production. The observed effects on electronic structures and oxygen vacancy formation emphasize the complex interactions between Rh₅ nanoclusters and the TiO₂ surface, guiding future research in the quest for clean energy alternatives. Full article