Search Results (20)

Sodium-ion batteries (SIBs) have emerged as a promising alternative to lithium-ion batteries (LIBs) in sectors requiring extensive energy storage. The abundant availability of sodium at a low cost addresses concerns associated with lithium, such as environmental contamination and limited availability. However, SIBs exhibit lower energy density and cyclic stability compared to LIBs. One of the key challenges in improving the performance of SIBs lies in the electrochemical properties of the cathode materials. Among the various cathodes utilized in SIBs, sodium vanadium phosphates (NVPs) and sodium vanadium fluorophosphates (NVPFs) are particularly advantageous. These vanadium-based cathodes offer high theoretical capacity and are cost-effective. Commercialization of SIBs with NVPF cathodes has already begun. However, the poor conductivity of these cathode materials leads to a short cycle life and inferior rate performance. Various synthesis methods have been explored to enhance the conductivity, including heteroatom doping (N, S, and Co), surface modification, the fabrication of porous nanostructures, and composite formation with conductive carbon materials. In particular, cathodes with interconnected hierarchical micro- and nano-porous morphologies have shown promise. This review focuses on the diverse synthesis methods reported for preparing hierarchically porous cathodes. With increased attention, particular emphasis has been placed on carbon composites of NVPs and NVPFs. Additionally, the synthesis of vanadium pentoxide-based cathodes is also discussed. Full article

In order to prepare biomass-derived carbon materials with high specific capacitance at a low activation temperature (≤700 °C), nanoporous carbon materials were prepared from zanthoxylum bungeanum peels and seeds via the pyrolysis and KOH-activation processes. The results show that the optimal activation temperatures are 700 °C and 600 °C for peels and seeds. Benefiting from the hierarchical pore structure (micropores, mesopores, and macropores), the abundant heteroatoms (N, S, and O) containing functional groups, and plentiful electrochemical active sites, the PAC-700 and SAC-600 derive the large capacities of ~211.0 and ~219.7 F g⁻¹ at 1.0 A g⁻¹ in 6 M KOH within the three-electrode configuration. Furthermore, the symmetrical supercapacitors display a high energy density of 22.9 and 22.4 Wh kg⁻¹ at 7500 W kg⁻¹ assembled with PAC-700 and SAC-600, along with exceptional capacitance retention of 99.1% and 93.4% over 10,000 cycles at 1.0 A g⁻¹. More significantly, the contribution here will stimulate the extensive development of low-temperature activation processes and nanoporous carbon materials for electrochemical energy storage and beyond. Full article

Coal tar pitch (CTP) is a high-quality raw material for producing functional carbon materials owing to its high carbon yield and high degree of condensation. The rational structure regulation of CTP-derived carbon materials is paramount for their special application. Herein, a green template strategy is proposed to fabricate hierarchically porous carbon (HPC) and employ it as the anode material for lithium-ion batteries. It can be demonstrated that the mass ratio of the template (KHCO₃) and carbon source (CTP) significantly influences the microstructure and electrochemical performances of HPC. HPC-3 synthesized by a mass ratio of 3:1 shows a coral-like lamellar nanostructure with high specific surface area, developed nanopores, and ample defects, enabling fast and high-flux lithium storage. Thus, the HPC-3 electrode achieves an excellent rate capacity of 219 mAh g⁻¹ at 10 A g⁻¹ and maintains a high discharge capacity of 660 mAh g⁻¹ after 1400 cycles at 1 A g⁻¹. This work takes a step towards the high-value-added and green utilization of CTP and offers a promising solution for the sustainable production of advanced carbon electrode materials. Full article

Heteroatom-doped nanoporous carbon materials with unique hierarchical structures have been shown to be promising supports and catalysts for energy conversion; however, hard-template methods are limited by their inflexibility and time-consuming process. Soft-template methods have been suggested as an alternative, but they are limited by their picky requirements for stable reactions and the few known precursors for small-batch synthesis. In this study, a gram-scale soft-template-based silica-assisted method was investigated for producing nitrogen-doped hollow nanoporous carbon spheres (N-HNCS). Nitrogen doping is accomplished during preparation with enhanced electrocatalytic activity without complicating the methodology. To investigate the effect of the unique structural characteristics of N-HNCS (specific surface area: 1250 m² g⁻¹; pore volume: 1.2 cm³ g⁻¹), cobalt was introduced as an active center for the oxygen reduction reaction. Finely tuned reaction conditions resulted in well-dispersed cobalt particles with minimal agglomeration. This sheds light on the advancement of new experimental procedures for developing more active and promising non-noble catalysts in large and stable batches. Full article

The energy storage performances of supercapacitors are expected to be enhanced by the use of nanostructured hierarchically micro/mesoporous hollow carbon materials based on their ultra-high specific surface areas and rapid diffusion of electrolyte ions through the interconnected channels of their mesoporous structures. In this work, we report the electrochemical supercapacitance properties of hollow carbon spheres prepared by high-temperature carbonization of self-assembled fullerene-ethylenediamine hollow spheres (FE-HS). FE-HS, having an average external diameter of 290 nm, an internal diameter of 65 nm, and a wall thickness of 225 nm, were prepared by using the dynamic liquid-liquid interfacial precipitation (DLLIP) method at ambient conditions of temperature and pressure. High temperature carbonization (at 700, 900, and 1100 °C) of the FE-HS yielded nanoporous (micro/mesoporous) hollow carbon spheres with large surface areas (612 to 1616 m² g⁻¹) and large pore volumes (0.925 to 1.346 cm³ g⁻¹) dependent on the temperature applied. The sample obtained by carbonization of FE-HS at 900 °C (FE-HS_900) displayed optimum surface area and exhibited remarkable electrochemical electrical double-layer capacitance properties in aq. 1 M sulfuric acid due to its well-developed porosity, interconnected pore structure, and large surface area. For a three-electrode cell setup, a specific capacitance of 293 F g⁻¹ at a 1 A g⁻¹ current density, which is approximately 4 times greater than the specific capacitance of the starting material, FE-HS. The symmetric supercapacitor cell was assembled using FE-HS_900 and attained 164 F g⁻¹ at 1 A g⁻¹ with sustained 50% capacitance at 10 A g⁻¹ accompanied by 96% cycle life and 98% coulombic efficiency after 10,000 consecutive charge/discharge cycles. The results demonstrate the excellent potential of these fullerene assemblies in the fabrication of nanoporous carbon materials with the extensive surface areas required for high-performance energy storage supercapacitor applications. Full article

The electrical double-layer supercapacitance performance of the nanoporous carbons prepared from the Phyllanthus emblica (Amala) seed by chemical activation using the potassium hydroxide (KOH) activator is reported. KOH activation was carried out at different temperatures (700–1000 °C) under nitrogen gas atmosphere, and in a three-electrode cell set-up the electrochemical measurements were performed in an aqueous 1 M sulfuric acid (H₂SO₄) solution. Because of the hierarchical pore structures with well-defined micro- and mesopores, Phyllanthus emblica seed-derived carbon materials exhibit high specific surface areas in the range of 1360 to 1946 m² g⁻¹, and the total pore volumes range from 0.664 to 1.328 cm³ g⁻¹. The sample with the best surface area performed admirably as the supercapacitor electrode-material, achieving a high specific capacitance of 272 F g⁻¹ at 1 A g⁻¹. Furthermore, it sustained 60% capacitance at a high current density of 50 A g⁻¹, followed by a remarkably long cycle-life of 98% after 10,000 subsequent charging/discharging cycles, demonstrating the electrode’s excellent rate-capability. These results show that the Phyllanthus emblica seed would have significant possibilities as a sustainable carbon-source for the preparing high-surface-area activated-carbons desired in high-energy-storage supercapacitors. Full article

Constructing hierarchical structures is indispensable to tuning the electromagnetic properties of carbon-based materials. Here, carbon microtubes with nanometer wall thickness and micrometer diameter were fabricated by a feasible approach with economical and sustainable kapok fiber. The carbonized kapok fiber (CKF) exhibits microscale pores from the inherent porous templates as well as pyrolysis-induced nanopores inside the wall, affording the hierarchical carbon microtube with excellent microwave absorbing performance over broad frequency. Particularly, CKF-650 exhibits an optimized reflection loss (RL) of −62.46 dB (10.32 GHz, 2.2 mm), while CKF-600 demonstrates an effective absorption bandwidth (RL < −10 dB) of 6.80 GHz (11.20–18.00 GHz, 2.8 mm). Moreover, more than 90% of the incident electromagnetic wave ranging from 2.88 GHz to 18.00 GHz can be dissipated by simply controlling the carbonization temperature of KF and/or the thickness of the carbon-microtube-based absorber. These encouraging findings provide a facile alternative route to fabricate microwave absorbers with broadband attenuation capacity by utilizing sustainable biomass. Full article

The nanoporous carbon fiber materials derived from electrospun polyacrylonitrile (PAN) fibers doped with zeolitic imidazolate framework are developed here and applied in the microbe fuel cell anode for enhanced interfacial electron transfer. Zeolitic imidazolate fram-8 (ZIF-8) could introduce a large number of mesopores into fibers, which significantly promote indirect electron transfer mediated by flavins (IET). Moreover, it is noted that thinner fibers are more suitable for cytochromes-based direct electron transfer (DET). Furthermore, the enlarged fiber interspace strengthens the amount of biofilm loading but a larger interspace between thick fibers would hinder the formation of continuous biofilm. Consequently, the nanoporous carbon fiber derived from PAN/ZIF-8 composite with a 1:1 wt ratio shows the best performance according to its suitable mesoporous structure and optimal fiber diameter, which delivers a 10-fold higher maximum power density in microbial fuel cells compared to carbon fabric. In this work, we reveal that the proportion of IET and DET in the interfacial electron transfer process varies with different porous structures and fiber diameters, which may provide some insights for designing porous fiber electrodes for microbial fuel cells and also other devices of bioelectrochemical systems. Full article

Nanoporous carbon materials from biomass exhibit a high surface area due to well-defined pore structures. Therefore, they have been extensively used in separation and purification technologies as efficient adsorbents. Here, we report the iodine and methylene blue adsorption properties of the hierarchically porous carbon materials prepared from Areca catechu nut. The preparation method involves the phosphoric acid (H₃PO₄) activation of the Areca catechu nut powder. The effects of carbonization conditions (mixing ratio with H₃PO₄, carbonization time, and carbonization temperature) on the textural properties and surface functional groups were studied. The optimum textural properties were obtained at a mixing ratio of 1:1, carbonized for 3 h at 400 °C, and the sample achieved a high specific surface area of 2132.1 m² g⁻¹ and a large pore volume of 3.426 cm³ g⁻¹, respectively. The prepared materials have amorphous carbon structures and contain oxygenated surface functional groups. Due to the well-defined micro-and mesopore structures with the high surface area and large pore volume, the optimal sample showed excellent iodine and methylene blue adsorption. The iodine number and methylene blue values were ca. 888 mg g⁻¹ and 369 mg g⁻¹, respectively. The batch adsorption studies of methylene dye were affected by pH, adsorbent dose, contact time, and initial concentration. The optimum parameters for the methylene blue adsorption were in alkaline pH, adsorbent dose of 2.8 g L⁻¹, and contact time of 180 min. Equilibrium data could be best represented by the Langmuir isotherm model with a monolayer adsorption capacity of 333.3 mg g⁻¹. Thus, our results demonstrate that the Areca catechu nut has considerable potential as the novel precursor material for the scalable production of high surface area hierarchically porous carbon materials that are essential in removing organic dyes from water. Full article

Biomass-derived activated carbon materials with hierarchically nanoporous structures containing nitrogen functionalities show excellent electrochemical performances and are explored extensively in energy storage and conversion applications. Here, we report the electrochemical supercapacitance performances of the nitrogen-doped activated carbon materials with an ultrahigh surface area prepared by the potassium hydroxide (KOH) activation of the Nelumbo nucifera (Lotus) seed in an aqueous electrolyte solution (1 M sulfuric acid: H₂SO₄) in a three-electrode cell. The specific surface areas and pore volumes of Lotus-seed–derived carbon materials carbonized at a different temperatures, from 600 to 1000 °C, are found in the range of 1059.6 to 2489.6 m² g⁻¹ and 0.819 to 2.384 cm³ g⁻¹, respectively. The carbons are amorphous materials with a partial graphitic structure with a maximum of 3.28 atom% nitrogen content and possess hierarchically micro- and mesoporous structures. The supercapacitor electrode prepared from the best sample showed excellent electrical double-layer capacitor performance, and the electrode achieved a high specific capacitance of ca. 379.2 F g⁻¹ at 1 A g⁻¹ current density. Additionally, the electrode shows a high rate performance, sustaining 65.9% capacitance retention at a high current density of 50 A g⁻¹, followed by an extraordinary long cycle life without any capacitance loss after 10,000 subsequent charging/discharging cycles. The electrochemical results demonstrate that Nelumbo nucifera seed–derived hierarchically porous carbon with nitrogen functionality would have a significant probability as an electrical double-layer capacitor electrode material for the high-performance supercapacitor applications. Full article

This article presents the development of a highly sensitive electrochemical heavy metal sensor based on hierarchical porous carbon electrodes with sponge-like edge structures. Micrometer-scale hierarchical nanoporous carbon electrodes were fabricated at a wafer-scale using cost-effective batch microfabrication technologies, including the carbon microelectromechanical systems technology and oxygen plasma etching. The sponge-like hierarchical porous structure and sub-micrometer edges of the nanoporous carbon electrodes facilitate fast electron transfer rate and large active sites, leading to the efficient formation of dense heavy metal alloy particles of small sizes during the preconcentration step. This enhanced the peak current response during the square wave anodic stripping voltammetry, enabling the detection of Cd(II) and Pb(II) at concentrations as low as 0.41 and 0.7 μg L⁻¹, respectively, with high sensitivity per unit sensing area (Cd: 109.45 nA μg⁻¹ L mm⁻², Pb: 100.37 nA μg⁻¹ L mm⁻²). Full article

Of the available environmentally friendly energy storage devices, supercapacitors are the most promising because of their high energy density, ultra-fast charging-discharging rate, outstanding cycle life, cost-effectiveness, and safety. In this work, nanoporous carbon materials were prepared by applying zinc chloride activation of lotus seed powder from 600 °C to 1000 °C and the electrochemical energy storage (supercapacitance) of the resulting materials in aqueous electrolyte (1M H₂SO₄) are reported. Lotus seed-derived activated carbon materials display hierarchically porous structures comprised of micropore and mesopore architectures, and exhibited excellent supercapacitance performances. The specific surface areas and pore volumes were found in the ranges 1103.0–1316.7 m² g⁻¹ and 0.741–0.887 cm³ g⁻¹, respectively. The specific capacitance of the optimum sample was ca. 317.5 F g⁻¹ at 5 mV s⁻¹ and 272.9 F g⁻¹ at 1 A g⁻¹ accompanied by high capacitance retention of 70.49% at a high potential sweep rate of 500 mV s⁻¹. The electrode also showed good rate capability of 52.1% upon increasing current density from 1 to 50 A g⁻¹ with exceptional cyclic stability of 99.2% after 10,000 cycles demonstrating the excellent prospects for agricultural waste stuffs, such as lotus seed, in the production of the high performance porous carbon materials required for supercapacitor applications. Full article

Hierarchically porous activated carbon materials from agro-waste, Jackfruit seeds are prepared by a chemical activation method involving the treatment with zinc chloride (ZnCl₂) at different temperatures (600–1000 °C). The electrochemical supercapacitance performances of the prepared materials were studied in an aqueous electrolyte (1 M sulfuric acid, H₂SO₄) in a three-electrode system. Jackfruit seed carbons display nanoporous structures consisting of both micro- and mesopore architectures and they are amorphous in nature and also contain oxygenated surface functional groups, as confirmed by powder X-ray diffraction (pXRD), Raman scattering, and Fourier-transformed infrared (FTIR) spectroscopy, respectively. The surface areas and pore volumes were found to be 1216.0 to 1340.4 m²·g⁻¹ and 0.804 to 1.144 cm³·g⁻¹, respectively, demonstrating the better surface textural properties compared to the commercial activated carbons. Due to the high surface area, large pore volume, and well developed hierarchical micro- and mesoporosity, the optimal sample achieved a high specific capacitance of 292.2 F·g⁻¹ at 5 mV·s⁻¹ and 261.3 F·g⁻¹ at 1 A·g⁻¹ followed by outstanding high rate capability. The electrode sustained 71.6% capacity retention at a high current density of 20 A·g⁻¹. Furthermore, the electrode displayed exceptional cycling stability with small capacitance loss (0.6%) even after 10,000 charging–discharging cycles, suggesting that Jackfruit seed would have potential in low-cost and scalable production of nanoporous carbon materials for supercapacitors applications. Full article

Nanoporous activated carbons-derived from agro-waste have been useful as suitable and scalable low-cost electrode materials in supercapacitors applications because of their better surface area and porosity compared to the commercial activated carbons. In this paper, the production of nanoporous carbons by zinc chloride activation of Washnut seed at different temperatures (400–1000 °C) and their electrochemical supercapacitance performances in aqueous electrolyte (1 M H₂SO₄) are reported. The prepared nanoporous carbon materials exhibit hierarchical micro- and meso-pore architectures. The surface area and porosity increase with the carbonization temperature and achieved the highest values at 800 °C. The surface area was found in the range of 922–1309 m² g⁻¹. Similarly, pore volume was found in the range of 0.577–0.789 cm³ g⁻¹. The optimal sample obtained at 800 °C showed excellent electrochemical energy storage supercapacitance performance. Specific capacitance of the electrode was calculated 225.1 F g⁻¹ at a low current density of 1 A g⁻¹. An observed 69.6% capacitance retention at 20 A g⁻¹ indicates a high-rate capability of the electrode materials. The cycling stability test up to 10,000 cycles revealed the outstanding stability of 98%. The fascinating surface textural properties with outstanding electrochemical performance reveal that Washnut seed would be a feasible agro-waste precursor to prepare nanoporous carbon materials as a low-cost and scalable supercapacitor electrode. Full article

The characteristic features of nanomaterials provide rich opportunities for a broad range of applications due to their different physicochemical properties. Nanocolloidal silver and graphenic carbon materials differ in most physicochemical characteristics, except for their nanodimensions. Since there is a growing demand for stem cell therapies for coronary disorders, examining cardiac progenitor cells (CPC) in terms of their response to nanostructure treatment seems to be a reasonable approach. Morphological studies and viability assessments were performed with CPC in vitro, treated with small concentrations of silver nanoparticles (AgNP), hierarchical nanoporous graphenic carbon (HNC) and their mixtures. A viability test confirmed the morphological assessment of CPC treated with AgNP and HNC; moreover, the action of both nanomaterials was time-dependent and dose-dependent. For AgNP, between the two of the applied concentrations lies a border between their potential beneficial effect and toxicity. For HNC, at a lower concentration, strong stimulation of cell viability was noted, whereas a higher dosage activated their differentiation. It is necessary to perform further research examining the mechanisms of the action of AgNP and especially of unexplored HNC, and their mixtures, on CPC and other cells. Full article