Search Results (20)

Gel polymer electrolytes (GPEs), which combine the safety of solid electrolytes with the high ionic conductivity of liquid electrolytes, have long been regarded as ideal electrolyte materials. This study proposes a polymer/ceramics composite gel electrolyte aimed at improving the performance of lithium-ion batteries. A nanofiber membrane was fabricated by electrospinning a mixture of polyacrylonitrile and lithium-salt-grafted helical mesoporous silica nanoparticles, followed by plasticizer absorption to obtain the composite gel electrolyte film (PAN/SiO₂-Li). Experimental results indicate that this gel electrolyte membrane possesses high thermal stability, a wide electrochemical window (>5.3 V vs. Li/Li⁺), high room-temperature ionic conductivity (~4.4 × 10⁻³ S cm⁻¹), and a good lithium-ion transference number (0.72). In symmetric Li||Li cells, this electrolyte suppresses lithium dendrite growth and maintains stable lithium deposition/stripping. This work presents a practical electrolyte design strategy for developing GPEs with enhanced safety and performance. Full article

Osteoporosis, a chronic bone disorder, poses a global threat to the health of millions of individuals. The disruption of bone homeostasis is the fundamental cause of osteoporosis. Currently, clinical drugs are employed to promote bone formation via enhancing osteogenesis and/or reduce bone loss via inhibiting osteoclastogenesis. However, it is difficult for the current drugs to simultaneously address the osteoblastogenesis and osteoclastogenesis issues associated with osteoporosis. Hence, L/D-phenylalanine derivatives (L/DPF), combined with Mg²⁺ ions, are employed to assemble into chiral supramolecular hydrogels which facilitate osteocyte activity and inhibit osteoclast function. LPF_Mg hydrogels and DPF_Mg hydrogels demonstrate the opposite supramolecular chirality. Specifically, LPF_Mg hydrogels and DPF_Mg hydrogels are composed of left-handed (M-type) helical nanofibers and right-handed (P-type) helical nanofibers, respectively. The hydrogen bonding and π–π stacking interactions are crucial in the process of hydrogel formation. The chiral left-handed nanofibrous DPF_Mg hydrogels significantly promote osteogenic differentiation of MC3T3 cells and inhibit osteoclast differentiation of RAW267.4 cells, thereby demonstrating substantial potential for applications in improving skeletal health. These findings provide a promising novel perspective on the application of chiral functional materials for osteoporosis therapy. Full article

The 21-residue peptide α3, which is artificially designed and consists of three repeats of 7 residues, is known to rapidly assemble into the α-helix nanofiber. However, its molecular structure within the fiber has not yet been fully elucidated. Thus, we conducted a thorough investigation of the fiber’s molecular structure using solid-state NMR and other techniques. The molecules were found to be primarily composed of the α-helix structure, with some regions near the C- and N-terminal adopting a 3₁₀-helix structure. Furthermore, it was discovered that β-sheet hydrogen bonds were formed between the molecules at both ends. These intermolecular interactions caused the molecules to assemble parallelly in the same direction, forming helical fibers. In contrast, we designed two molecules, CaRP2 and βKE, that can form β-sheet intermolecular hydrogen bonds using the entire molecule instead of just the ends. Cryo-EM and other measurements confirmed that the nanofibers formed in a cross β structure, albeit at a slow rate, with the formation times ranging from 1 to 42 days. To create peptide nanofibers that instantaneously respond to changes in the external environment, we designed several molecules (HDM1-3) based on α3 by introducing metal-binding sites. One of these molecules was found to be highly responsive to the addition of metal ions, inducing α-helix formation and simultaneously assembling into nanofibers. The nanofibers lost their structure upon removal of the metal ion. The change occurred promptly and was reversible, demonstrating that the intended level of responsiveness was attained. Full article

Chitin nanofibers (ChNFs) with a bundle structure were fabricated via regenerative self-assembly at the nanoscale from a chitin ion gel with an ionic liquid using methanol. Furthermore, the bundles were disentangled by partial deacetylation under alkaline conditions, followed by cationization and electrostatic repulsion in aqueous acetic acid to obtain thinner nanofibers called scaled-down ChNFs. This review presents a method for hydrogelation from self-assembled and scaled-down ChNFs by modifying the highly polar substituents on ChNFs. The modification was carried out by the reaction of amino groups on ChNFs, which were generated by partial deacetylation, with reactive substituent candidates such as poly(2-oxazoline)s with electrophilic living propagating ends and mono- and oligosaccharides with hemiacetallic reducing ends. The substituents contributed to the formation of network structures from ChNFs in highly polar dispersed media, such as water, to produce hydrogels. Moreover, after the modification of the maltooligosaccharide primers on ChNFs, glucan phosphorylase-catalyzed enzymatic polymerization was performed from the primer chain ends to elongate the amylosic graft chains on ChNFs. The amylosic graft chains formed double helices between ChNFs, which acted as physical crosslinking points to construct network structures, giving rise to hydrogels. Full article

The lack of tools particularly designed for the quantification of the fiber morphology in nonwovens, especially the multi-level structured fibers, is the main reason for the limited research studies on the establishment of realistic nonwoven structure. In this study, two polymers, cellulose acetate (CA) and thermoplastic polyurethane (TPU), which have different molecular flexibility, were chosen to produce nonwovens with helical nanofibers. Focusing on the nonwovens with helical fibers, a soft package was developed to characterize fiber morphologies, including fiber orientation, helix diameter, and curvature of helix. The novelty of this study is the proposal of a method for the characterization of nanofibrous nonwovens with special fiber shape (helical fibers) which can be used for curve fibers. The characterization results for the helical-fiber nonwoven sample and the nonwoven sample with straight fibers were compared and analyzed. Full article

In this study, a novel nanofibrous hybrid scaffold based on silk fibroin (SF) and different weight ratios of kappa-carrageenan (k-CG) (1, 3, and 5 mg of k-CG in 1 mL of 12 wt% SF solution) was prepared using electrospinning and genipin (GP) as a crosslinker. The presence of k-CG in SF nanofibers was analyzed and confirmed using Fourier transform infrared spectroscopy (FTIR). In addition, X-ray diffraction (XRD) analysis confirmed that GP could cause SF conformation to shift from random coils or α-helices to β-sheets and thereby facilitate a more crystalline and stable structure. The ultimate tensile strength (UTS) and Young’s modulus of the SF mats were enhanced after crosslinking with GP from 3.91 ± 0.2 MPa to 8.50 ± 0.3 MPa and from 9.17 ± 0.3 MPa to 31.2 ± 1.2 MP, respectively. Notably, while the mean fiber diameter, wettability, and biodegradation rate of the SF nanofibers increased with increasing k-CG content, a decreasing effect was determined in terms of UTS and Young’s modulus. Additionally, better cell viability and proliferation were observed on hybrid scaffolds with the highest k-CG content. Osteogenic differentiation was determined from alkaline phosphatase (ALP) activity and Alizarin Red staining and expression of osteogenic marker genes. To this end, we noticed that k-CG enhanced ALP activity, calcium deposition, and expression of osteogenic genes on the hybrid scaffolds. Overall, hybridization of SF and k-CG can introduce a promising scaffold for bone regeneration; however, more biological evaluations are required. Full article

This article presents the results of investigations of the morphology and structure of carbon deposit formed as a result of ethanol decomposition at 500 °C, 600 °C, and 700 °C without water vapour and with water vapour (0.35 and 1.1% by volume). scanning electron microscopy (SEM) and scanning transmission electron microscopy (STEM) observations as well as energy dispersive X-ray spectrometry (EDS), X-ray diffraction (XRD), and Raman spectroscopic analyses allowed for a comprehensive characterization of the morphology and structure of cylindrical carbon nanostructures present on the surface of the Ni₃Al catalyst. Depending on the reaction mixture composition (i.e., water vapour content) and decomposition temperature, various carbon nanotubes/carbon nanofibres (CNTs/CNFs) were observed: multiwalled carbon nanotubes, herringbone-type multiwall carbon nanotubes, cylindrical carbon nanofibers, platelet carbon nanofibers, and helical carbon nanotubes/nanofibres. The discussed carbon nanostructures exhibited nickel nanoparticles at the ends and in the middle part of the carbon nanostructures as catalytically active centres for efficient ethanol decomposition. Full article

Self-assembly of artificial peptides has been widely studied for constructing nanostructured materials, with numerous potential applications in the nanobiotechnology field. Herein, we report the synthesis and hierarchical self-assembly of collagen-mimetic peptides (CMPs) bearing various aromatic groups at the N-termini, including 2-naphthyl, 1-naphtyl, anthracenyl, and pyrenyl groups, into nanofibers. The CMPs (R-(GPO)_n: n > 4) formed a triple helix structure in water at 4 °C, as confirmed via CD analyses, and their conformations were more stable with increasing hydrophobicity of the terminal aromatic group and peptide chain length. The resulting pre-organized triple helical CMPs showed diverse self-assembly into highly ordered nanofibers, reflecting their slight differences in hydrophobic/hydrophilic balance and configuration of aromatic templates. TEM analysis demonstrated that 2Np-CMP_n (n = 6 and 7) and Py-CMP₆ provided well-developed natural collagen-like nanofibers and An-CMP_n (n = 5–7) self-assembled into rod-like micelle fibers. On the other hand, 2Np-CMP₅ and 1Np-CMP₆ were unable to form nanofibers under the same conditions. Furthermore, the Py-CMP₆ nanofiber was found to encapsulate a guest hydrophobic molecule, Nile red, and exhibited unique emission behavior based on the specific nanostructure. In addition to the ability of CMPs to bind small molecules, their controlled self-assembly enables their versatile utilization in drug delivery and wavelength-conversion nanomaterials. Full article

Limited studies have been done on silk fibroins of wild silkworm species owing to their relative insolubility in many solvents. In this study, the solubility of Argema mimosae wild silk fibroin in different salts (LiBr, LiCl, Ca(NO₃)₂, and CaCl₂) dissolved in formic acid under varying temperatures was investigated. The dissolution conditions under which the solubility was optimum were optimized using a central composite design approach. The optimum range for solvation of the fibroin were visualized using contour plots. The influence of temperature and salt concentration were found to significantly influence the solvation of the fibroin. Following the successful dissolution of the fibroin, the regenerated silk fibroin solutions were cast to obtain water insoluble films which were used in investigating optimum electrospinning conditions. Average nanofiber diameters in the 110–141 nm range were obtained under optimum electrospinning conditions. The silk forms were characterized using the FTIR, TGA, XRD, and SEM to understand their properties. The investigations revealed that formic acid—salt solvents were effective in the solvation of the wild silk fibroin. Some of the dissolution conditions induced mild effects on the silk fibroin while others were harsh. Furthermore, processing to nanofibers resulted in the degradation of the β-sheets producing nanofibers rich in α-helices. However, post-treatment using methanol and water vapor were effective in restoring β-sheet crystallinity. Full article

Corn zein protein is a cheap, widely available biopolymer that is easily extracted from corn and processed into useful forms. In this study, zein was dissolved along with several model drugs or sodium citrate, which was then cast into thin films or air-spun into nanofibers. The molecular weight, solubility, and charge of the selected model drugs are different, and the weight percentage of citrate also varies (1%–30%). The integrity of the loaded biomaterials was characterized through FTIR, SEM, DSC, and TGA. Due to the high surface-area-to-volume ratio of nanofibers, FTIR analysis showed that the therapeutics strongly interacted with the protein structure of zein nanofibers, transforming their structure from a random coil network to a more ordered alpha helical structure. Zein films did not show this obvious shift. This structural change reflects the results of a drug release study where nanofibers showed a slower, sustained release of therapeutics compared with their film counterparts. Statistical analysis by t-test proved a significant difference in release from fibers vs. release from films (p < 0.01 for low wt%). The structural integration of zein with its therapeutics also improved the thermal properties of the biomaterial, where fibers did not degrade until temperatures reached 160 °C, but films degraded earlier at 130 °C. Finally, the biocompatibility of zein was confirmed by culturing HEK293 cells on different zein films and fibers for 72 h. An MTT assay confirmed good biocompatibility and an improved cell density on fibers and films compared with a blank control. These promising results, summarized in Figure 1, demonstrate that corn zein has a large potential in the field of drug delivery and biomaterials. Full article

In this study, hexagonal boron nitride (h-BN) nanosheets and Bombyx mori silk fibroin (SF) proteins were combined and electrospun into BNSF nanofibers with different ratios. It was found that the surface morphology and crosslinking density of the nanofibers can be tuned through the mixing ratios. Fourier transform infrared spectroscopy study showed that pure SF electrospun fibers were dominated by random coils and they gradually became α-helical structures with increasing h-BN nanosheet content, which indicates that the structure of the nanofiber material is tunable. Thermal stability of electrospun BNSF nanofibers were largely improved by the good thermal stability of BN, and the strong interactions between BN and SF molecules were revealed by temperature modulated differential scanning calorimetry (TMDSC). With the addition of BN, the boundary water content also decreased, which may be due to the high hydrophobicity of BN. These results indicate that silk-based BN composite nanofibers can be potentially used in biomedical fields or green environmental research. Full article

This research describes the adsorption of Cu²⁺ onto a helical ribbon carbon nanofiber. The characterization of carbon nanofiber by zeta potential showed an isoelectronic pH of 1.9. The influence of different adsorption factors, such as stirring speed, temperature, pH, adsorbent concentration, etc., on the Cu²⁺ adsorption capacity have been evaluated. The pH has a great influence on Cu²⁺ adsorption, with the maximum adsorption capacity reached at a pH of 10. The experimental data fit well to pseudo-second order kinetic and Langmuir isotherm models (q_m = 8.80 mg·g⁻¹) at T = 298 K and pH = 4. The Cu²⁺ adsorption could be explained by the particle diffusion model. Results showed that carbon nanofiber could be successfully used for the elimination of Cu²⁺ from wastewater. Full article

As a promising agent for biomedical application, collagen has been used as a nanofiber to architecturally mimic its fibrillar structure in Extracellular Matrix (ECM); however, it has to be modified by techniques, such as crosslinking, to overcome its limitations in structural stability along with potential toxicity. Here, we prepared collagen/polyethylene oxide (PEO) nanofibrous membranes with varying crosslinking degrees and their properties, such as water stability, mechanical properties, blood clotting capacity and cytocompatibility, were studied systematically. By investigating the relationship between crosslinking degree and their properties, nanofibrous membranes with improved morphology retention, blood clotting capacity and cytocompatibility have been achieved. The result of circular dichroism measurement demonstrated that a triple helical fraction around 60.5% was retained. Moreover, the electrospun collagen/PEO at crosslinking degrees above 60.6% could maintain more than 72% of its original weight and its nanofibrous morphology under physiological conditions could be well preserved for up to 7 days. Furthermore, the crosslinked collagen/PEO membrane could provide a more friendly and suitable environment to promote cell proliferation, and about 70% of the clot can be formed in 5 min. With its superior performance in water stability, hemostasis and cytocompatibility, we anticipate that this nanofibrous membrane has great potential for wound dressing. Full article

Helical fibers in nanoscale have been of increasing interest due to their unique characteristics. To explore the effect of polymer type on helical fiber formation, three polymer systems, Poly(m-phenylene isophthalamide) (Nomex)/polyurethane (TPU), polystyrene (PS)/TPU and polyacrylonitril (PAN)/TPU are used to fabricate helical nanofibers via co-electrospinning. Differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and Zeta potential were employed to investigate the interfacial interaction between the two phases of the polymer system. The larger rigidity differential of Nomex and TPU leads to a larger interfacial interaction. The hydrogen bonds help to increase the interfacial interaction between Nomex and TPU components. The attractive force between the chloride-ions contained in Nomex molecules and the free charges on the solution surface lead to a longitudinal interfacial interaction in the Nomex/TPU system. The analysis results provide the explanation of the experimental results that the Nomex/TPU system has the greatest potential for producing helical nanofibers, while the PS/TPU and PAN/TPU systems cannot fabricate helical fibers effectively. This study based on the interfacial interaction between polymer components provides an insight into the mechanism of helical fiber formation. Full article

Micro/nano serpentine structures have widespread applications in flexible/stretchable electronics; however, challenges still exist for low-cost, high-efficiency and controllable manufacturing. Helix electrohydrodynamic printing (HE-printing) has been proposed here to realize controllable direct-writing of large area, highly aligned serpentine micro/nanofibers by introducing the rope coiling effect into printing process. By manipulating the flying trajectory and solidification degree of the micro/nano jet, the solidified micro/nanofiber flying in a stabilized helical manner and versatile serpentine structures deposited on a moving collector have been achieved. Systematic experiments and theoretical analysis were conducted to study the transformation behavior and the size changing rules for various deposited microstructures, and highly aligned serpentine microfibers were directly written by controlling the applied voltage, nozzle-to-collector distance and collector velocity. Furthermore, a hyper-stretchable piezoelectric device that can detect stretching, bending and pressure has been successfully fabricated using the printed serpentine micro/nanofibers, demonstrating the potential of HE-printing in stretchable electronics manufacturing. Full article