Search Results (526)

The presence of pharmaceuticals in treated wastewater has become an environmental concern due to their persistence, biological activity, and incomplete removal in conventional wastewater treatment systems. In this study, a g-C₃N₄/rGO nanocomposite was synthesized via thermal polycondensation of melamine in the presence of reduced graphene oxide and evaluated as a photocatalyst for the degradation of selected pharmaceuticals in membrane bioreactor (MBR)-treated wastewater. The obtained materials were characterized using Fourier-transform infrared spectroscopy (FTIR–ATR), X-ray diffraction (XRD), nitrogen adsorption–desorption measurements (BET), Raman spectroscopy, scanning electron microscopy (SEM), and UV–Vis spectroscopy to evaluate their chemical structure, crystallinity, textural properties, morphology, and optical characteristics. Photocatalytic experiments were performed under UV irradiation using real wastewater spiked with carbamazepine, diclofenac, ibuprofen, and sulfamethoxazole at an initial concentration of 50 mg/L, selected to ensure reliable quantification under laboratory conditions. The complete removal of diclofenac and sulfamethoxazole was achieved within 30 min of treatment, while the presence of the nanocomposite enhanced the degradation efficiency of ibuprofen and carbamazepine by approximately 19% and 13%, respectively, compared to UV irradiation alone. The obtained results demonstrate the applicability of the investigated g-C₃N₄/rGO system for pharmaceutical degradation in real wastewater matrices and indicate its potential as a preliminary photocatalytic post-treatment approach. Full article

Graphene and carbon nanotube (CNT) membranes are promising for filtration, desalination, and water treatment, yet their performance requires the joint interpretation of their architecture, nanoconfined transport, selectivity, fouling, swelling, defects, stability, and operating conditions. Here, GCMembrane-LLM was developed as an evidence-grounded domain-specific large language model. A curated 582-paper corpus generated 12,208 cleaned membrane-specific question–answer pairs for Low-Rank Adaptation (LoRA)-based supervised fine-tuning of Llama-3.1-8B-Instruct, and retrieval-augmented generation provided article-title and page-level traceability. GCMembraneBench included 100 application-oriented questions on graphene oxide (GO) membranes, CNT membranes, GO/CNT hybrids, and cross-material reasoning. Under direct answering without retrieval context, the anonymized and shuffled automatic evaluation showed that GCMembrane-LLM achieved a mean weighted score of 4.237/5.0, exceeding Llama-3.1-8B-Instruct and Doubao-1.5-lite. A stratified 30-question blinded manual assessment showed the same ranking. The application cases further yielded membrane science conclusions: CNT-assisted GO/CNT transport should be evaluated with dispersion, interfacial compatibility, defects, and stability; GO desalination depends on swelling control, interlayer spacing, and defect suppression; and CNT high flux requires joint examination of pore diameter, entrance chemistry, hydration barriers, ion rejection, and operating conditions. GCMembrane-LLM supports source-traceable evidence organization and preliminary hypothesis formulation before experimental validation. Full article

Impaired wound healing arises from interacting biological and material challenges, including persistent infection, biofilm formation, oxidative stress, unresolved inflammation, impaired angiogenesis, defective epithelialization, hemorrhage, and insufficient real-time assessment of wound status. Quantum dot (QD) and nanodot nanosystems have emerged as a versatile class of bioactive wound interfaces capable of addressing these barriers through functions that extend beyond passive coverage. This review synthesizes the design rationale, material composition, validation strategies, functional outcomes, mechanistic interpretation, and translational relevance of QD-enabled platforms for precision wound repair. Across the reviewed literature, carbon dots, graphene QDs, black phosphorus QDs, metal and metal oxide QDs, transition-metal nanodots, and hybrid nanocomposites were incorporated into hydrogels, films, sponges, nanofibers, microneedles, scaffolds, membranes, sprays, and injectable matrices. Their major precision-enabling attributes include localized antimicrobial and antibiofilm activity, redox-adaptive behavior, photothermal and photodynamic activation, inflammatory and macrophage modulation, hemostasis, controlled therapeutic delivery, angiogenic and epithelial support, and fluorescence-based monitoring. The strongest conceptual advance is the transition from static wound dressings toward adaptive biointerfaces that can sense, respond to, or compensate for local wound state abnormalities. Nevertheless, the field remains largely preclinical, with important gaps in long-term safety, standardized characterization, clinically predictive models, manufacturing reproducibility, regulatory alignment, and human validation. Future progress will depend on rationally simplified multifunctional platforms, rigorous comparative testing, wound state-specific evaluation frameworks, and translation-oriented safety and usability studies. QD nanosystems therefore represent a promising foundation for precision wound repair, provided that their multifunctionality is matched by equally rigorous evidence of safety, reproducibility, and clinical relevance. Full article

This study investigates graphene oxide/carboxymethyl cellulose composite membranes containing 3 wt.% graphene oxide. The influence of the carboxymethyl cellulose content on the structural organization, mechanical properties, electrical resistivity, and humidity-dependent conductivity was systematically analyzed using Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, tensile testing, and electrical measurements. Fourier transform infrared spectroscopy indicated intermolecular interactions between graphene oxide and carboxymethyl cellulose functional groups. X-ray diffraction analysis showed gradual inter-layer expansion from 0.71 to 0.87 nm together with crystallite size reduction after polymer incorporation. Scanning electron microscopy observations demonstrated the increasing structural uniformity and polymer encapsulation of graphene oxide sheets with the increasing carboxymethyl cellulose content. Mechanical testing revealed improvement in the tensile strength from 6.6 to 17.8 MPa with the increasing carboxymethyl cellulose concentration. Simultaneously, the dry-state electrical resistivity increased from 5.8 × 10⁶ to 2.32 × 10⁷ Ω·m due to increasing dielectric separation between graphene oxide domains. Humidity-sensing experiments demonstrated reversible resistance changes in the 20–90% relative humidity range, associated with proton-assisted conduction through adsorbed water layers. The obtained results demonstrate that polymer incorporation strongly influences both the structural organization and electrophysical behavior of graphene oxide/carboxymethyl cellulose composite membranes. Full article

This study investigates the application of polymer inclusion membranes (PIMs) for the removal/recovery of 1H-benzotriazole from aqueous solutions, via facilitated transport mechanism, using tri-n-octylamine as a carrier and NaOH as a stripping agent. The process efficiency was analyzed using 1H-benzotriazole flux and permeability through the membrane, its recovery percentage, and the transport process kinetic constant. PIM containing 40% cellulose triacetate, 30% o-nitrophenyl octyl ether and 30% tri-n-octylamine yielded the best results for all four parameters studied due to the role of o-nitrophenyl octyl ether and tri-n-octylamine in reducing the cellulose triacetate polarity, which leads to carrier solubilization on the plasticizer, creating continuous pathways within the membrane and facilitating 1H-benzotriazole transport. Reduced graphene oxide inclusion as the fourth PIM component increases its hydrophobicity, promoting continuous pathway formation and enhancing 1H-benzotriazole transport, which leads to an increase of 10% to 20% in the values of the four parameters analyzed. Ultrasound use in membrane preparation leads to a further increase of 9% to 20% in the values of the four parameters analyzed because the cavitation effect improves the molecular mixing of membrane components and results in a less ordered configuration of cellulose triacetate molecules, thereby reducing their crystallinity degree. All of this significantly improves the interaction between the membrane components and pathway formation, enhancing 1H-benzotriazole transport through the membrane. Full article

In the Arabian Gulf region, saltwater desalination is considered to be a significant process in producing clean water. This paper presents a sustainable, combined process for upgrading a Doha reverse osmosis (RO) plant in Kuwait. A pilot-scale microbial desalination cell (MDC) stack is proposed as a pre-treatment unit prior to the RO process in order to improve plant performance. A cost–benefit analysis is conducted for the combined system to emphasize the significance of the MDC–RO process. In RO, the expected energy consumption is 2.6–13 kWh per m³ of desalinated water, whereas using MDC can reduce this to about 0.52–5.3 kWh/m³. Moreover, this new technology using catalytic MDCs can help in improving electric current production and reducing the amount of rejected brine and membrane fouling in the RO process. The electric current is improved by reducing MDCs’ internal resistance using a reduced graphene oxide/polyaniline composite-coated stainless steel mesh cathode electrode. Layer-by-layer electro-deposition can be applied to achieve these coatings. An intermediate zeolite filter is proposed to mitigate RO membrane fouling. The combined system’s natural zeolite-membrane filter improves water purification. In this study, we assessed the combined MDC–RO process for upgrading the Doha plant’s performance in terms of quality, cost, and time. The suggested catalytic MDC, using efficient, low-cost materials as cathode electrodes with an equivalent daily cost of 0.01 USD/m³ and a desalination efficiency of about 40%, acts as an alternative to high-cost platinum metal electrodes. The results also indicate that the equivalent daily cost of energy consumption using the MDC process is about 0.03 USD/m³, whereas the investment cost is about 0.4 USD/m³ daily for one year of cell operation. Full article

Freshwater scarcity driven by population growth and industrial demand has increased reliance on desalination, where reverse osmosis (RO) is widely applied due to its high separation efficiency. Membrane performance is governed by the balance between water permeability and solute rejection, and attempts to improve this relationship have focused on incorporating nanomaterials to modify membrane structure and transport behavior. In this study, a computational investigation was carried out for thin-film composite (TFC) membranes incorporating graphene oxide–poly(amidoamine) (GO–PAMAM) within the polysulfone substrate to examine its influence on transport under RO conditions. A two-dimensional model was implemented in COMSOL Multiphysics by coupling the Laminar Flow and Transport of Diluted Species interfaces, while permeation across the membrane was described using a solution–diffusion framework parameterized by experimentally determined salt permeability coefficient. Variation in GO–PAMAM loading (0–0.10 wt%) was introduced through intrinsic permeability parameters, enabling direct comparison with experimental data. The simulations reproduced the observed trends, with the membrane containing 0.06 wt% GO–PAMAM showing higher salt rejection, increasing from 78.16% to 90.08% relative to the pristine membrane. The model predicted lower permeate-side solute concentration and a decrease in salt rejection along the membrane length. Model predictions agreed with experiments, with mean relative errors of 1.23% for salt rejection and 7.41% for water flux, demonstrating the ability of the model to capture transport behavior in GO–PAMAM-modified TFC membranes. Full article

This study reports the development of a novel thin-film nanocomposite (TFN) reverse osmosis (RO) membrane with a surface functionalized using graphene oxide (GO) and polydopamine (PDA). GO was synthesized using a modified Hummers’ method and integrated into a PDA-coated commercial RO membrane. The membranes were treated with UV light for varying durations to enable crosslinking of GO nanoparticles to the membranes. The modified membranes showed improved pure water permeability (PWP) and salt rejection compared to the pristine membrane. The resulting RO membrane, which was exposed to 60 min of UV and contained 0.02 g of GO, achieved the best performance, with a PWP of 23.8 L m⁻² h⁻¹ bar⁻¹ and a salt rejection of 96%. Antiscaling and antifouling properties were notably enhanced, as indicated by stable flux under silica scaling and decreased bacterial growth. These results suggest that PDA-GO functionalization is a promising approach for improving membrane durability and efficiency in desalination processes. Full article

Pancreatic ductal adenocarcinoma (PDAC) is the most aggressive malignancy, characterized by rapid progression, early metastasis, and resistance to conventional therapies. Increasing evidence indicates that the behavior of residual tumor cells is strongly influenced by physicochemical properties of their microenvironment. Surface engineering strategies using nanostructured materials may therefore represent a complementary approach to modulating cancer cell activity. In this study, we investigated whether a graphene oxide (GO) aerosol nanofilm modifies the biological behavior of PDAC cells in vitro. The GO aerosol (4.5 g/L) was characterized using STEM, DLS, zeta potential measurements, LIBS, EDX, and FTIR spectroscopy. Ultrastructural analysis revealed thin, wrinkled GO sheets forming partially overlapping lamellar structures, while physicochemical characterization confirmed a highly oxidized stable nanomaterial. Human PDAC cell lines (BxPC-3 and AsPC-1) were cultured on GO-modified substrates to assess morphology (SEM), metabolic activity (XTT assay), migratory capacity (wound healing assay over 72 h), and expression of genes related to proliferation and epithelial–mesenchymal transition (EMT) by RT-qPCR. GO nanofilm significantly reduced cell viability and inhibited migration in both cell lines. SEM analysis demonstrated shortened cytoplasmic projections and altered membrane integrity. Gene expression profiling revealed cell line-dependent transcriptional responses, including modulation of components of the PI3K/AKT/mTOR pathway and EMT-associated markers. Collectively, our findings demonstrate that GO aerosol nanofilm alters PDAC cell morphology, viability, and migratory behavior in vitro. Surface-mediated modulation of tumor cell activity may represent a promising adjunct strategy for limiting residual cancer cell survival and metastatic potential. Full article

The global energy transition and the implementation of carbon capture, utilization, and storage (CCUS) strategies require energy-efficient and scalable CO₂ separation technologies. Mixed-matrix membranes (MMMs), combining polymer matrices with functional inorganic or hybrid nanofillers, have emerged as advanced separation platforms capable of surpassing the conventional permeability–selectivity trade-off observed in neat polymer membranes. This review critically evaluates recent developments in modern hybrid membranes for CO₂ separation from synthetic and industrial gas mixtures, including CO₂/N₂ (flue gas), CO₂/CH₄ (natural gas and biogas upgrading), and syngas systems. Particular emphasis is placed on MMMs incorporating covalent organic frameworks (COFs), metal–organic frameworks (MOFs), graphene oxide (GO), MXenes, transition metal dichalcogenides (TMDs), carbon nanotubes (CNTs), g-C₃N₄, layered double hydroxides (LDH), zeolites, metal oxides, and magnetic nanoparticles. Reported performance ranges include CO₂ permeability (P_CO2) typically between 100 and 800 Barrer, CO₂/N₂ selectivity up to 319, and CO₂/CH₄ selectivity up to 249, depending on filler chemistry, loading, and interfacial compatibility. The mechanisms governing gas transport—molecular sieving, selective adsorption, facilitated transport, and diffusion-pathway engineering—are systematically discussed. Key challenges addressed include filler dispersion, polymer–filler interfacial defects, physical aging, moisture sensitivity, oxidation (particularly in MXenes), and scalability toward industrial membrane modules. Future perspectives focus on sub-nanometer pore engineering, surface functionalization to enhance CO₂ affinity, controlled alignment of 2D nanosheets to promote directional transport, multifunctional core–shell and hollow structures, and the integration of computational modeling and machine learning for accelerated material design. Modern hybrid MMMs are identified as strategically important materials enabling high-efficiency CO₂ separation processes aligned with decarbonization and energy transition objectives. Full article

Graphene oxide (GO) is a promising nanocarrier for the delivery of oligonucleotides. It offers a high loading capacity, efficient cellular uptake, and surface functionalization. MicroRNA-21 (miR-21) is a well-characterized oncomiR commonly overexpressed in hepatocellular carcinoma (HCC). In HCC, miR-21 contributes to tumor progression, inflammation, and angiogenesis. In a previous in vitro study, we showed that GO alone induces the upregulation of pro-inflammatory and tumor-related genes in HepG2 cells. However, conjugation with an antisense miR-21 (GO-antisense miRNA 21) reverses this effect, suggesting a potential therapeutic application. This study aims to evaluate the antitumor and anti-angiogenic efficacy of the GO-antisense miR-21 nanosystem in ovo using the chick embryo chorioallantoic membrane (CAM) model. Fertilized chicken eggs (n = 4 per group) were randomized into untreated, GO-treated, and GO–antisense miR-21-treated cohorts. A dose of 200 μL (GO 10.0 µg/mL: antisense miR-21 5.0 pmol/mL) was administered intratumorally. Tumor size, volume, and vascularization were monitored through stereomicroscopy and histological analysis. The expression of inflammatory and tumor-associated genes (IL-8, MCP-1, TIMP-2, ICAM-1 and NF-kB) was assessed by quantitative PCR. Given its prominent response, IL-8 protein expression was further analyzed via immunofluorescence. To evaluate tumor-specific delivery, FITC-labeled GO was tracked by confocal microscopy. Our data revealed that treatment with unfunctionalized graphene oxide (GO) unexpectedly promoted tumor vascularization and led to a significant increase in tumor weight. This was accompanied by upregulation of inflammatory markers. In contrast, GO-antisense miR-21 significantly reduced the tumor volume and vessel density. It also successfully downregulated all target genes. Confocal imaging demonstrated preferential accumulation of the nanosystem within the tumor mass. Our results highlight the dual anti-inflammatory and anti-angiogenic effects of GO-antisense miRNA 21 in ovo and support its potential as a targeted nanoplatform for HCC treatment. Full article

Nano-graphene oxide (NGO) is a nanomaterial that has been frequently used in the fields of health and bioengineering in recent years. However, its potential use in semen cryopreservation is still in the exploratory phase. In this study, Angora bucks, a breed with low resistance to cold shock, were used. Sperm was collected from five different Angora bucks, pooled, diluted with a Tris-based egg yolk diluent, and frozen with the addition of NGO at two different sizes (50 and 500 nm) and doses (10 and 50 µg/mL). Nanoparticle characterization was performed using field emission scanning electron microscopy (FE-SEM), dynamic light scattering (DLS), and Fourier-transform infrared spectroscopy (FTIR). Post-thaw sperm analyses were evaluated based on motility and kinematic parameters, mitochondrial membrane potential (MMP), plasma membrane and acrosome integrity (PMAI), and DNA fragmentation. Applying 50 nm NGO at a dose of 50 µg/mL led to statistically significant improvements in motility and PMAI (p < 0.05). The same dose of 500 nm NGO, however, only showed a statistically significant improvement in the PMAI parameter (p < 0.05). No significant differences were observed between the groups for MMP and kinematic parameters (p > 0.05). Conversely, it was found that all sizes and doses of NGO significantly protected post-thaw sperm regarding DNA integrity (p < 0.05). These findings indicate that the NGO, at a size of 50 nm and a dose of 50 µg/mL, improves the post-thaw quality of Angora buck sperm and provides a cryoprotective effect that depends on size and dose. This study provides preliminary data on the potential effects of NGO; however, comprehensive mechanistic and in vivo validation studies are required to establish the biological and clinical validity of these findings. Full article

Globally, freshwater scarcity is driving the urgent demand for advanced and new desalination technologies to overcome the shortage of clean water. Reverse osmosis (RO) membranes dominate seawater and brackish water treatment but are limited by the permeability–selectivity trade-off, fouling, and structural instability. To overcome these challenges, we employed a phase inversion process to fabricate polysulfone (PSF) supports embedded with a graphene oxide–poly(amidoamine) (GO-PAMAM) nanocomposite at three concentrations (0.03, 0.06, and 0.10 wt%), alongside a pristine control membrane with no GO-PAMAM. Systematic variation in GO-PAMAM loading revealed that a 0.06 wt% nanoparticle helps in producing a more uniform polyamide layer that achieves a high NaCl rejection (95.88%) and higher water flux (42.6 L m⁻² h⁻¹). The performance was evaluated at an operating pressure of 20 bar with a feed flow rate of 4 L min⁻¹. The optimized membrane also demonstrated an improved fouling resistance, retaining 93% of its initial flux after fouling. This scalable approach highlights substrate-level modification as an effective strategy for next-generation RO membranes, advancing sustainable and energy-efficient desalination to meet escalating global water demands. Full article

This work provides a systematic experimental study for the electrochemical desalination of saline water using an electrospun permselective polyvinylidene difluoride (PVDF) membrane. Several nano additives were initially screened during membrane development; however, only the materials that demonstrated stable dispersion, reproducible membrane formation, and consistent electrochemical behaviour, namely graphene oxide (GO) and carbon nanotubes (CNTs) were selected for full analysis in this study. Accordingly, the study focuses on pure PVDF, PVDF/GO, and PVDF/CNTs membranes integrated with an alternating Ag/AgCl electrode system. The silver electrode is prepared by spray-coating of silver nanoparticles on high surface carbon cloth, whereas the AgCl electrode was prepared electrochemically from the Ag electrode using a three-electrode electrochemical cell. The electrochemical behaviour of various modified electrodes (bare carbon cloth, Ag/carbon cloth, Ag/nafion/carbon black/PVDF, and Ag/nafion/carbon cloth) was evaluated using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and X-Ray Diffraction (XRD). The electrode prepared using Nafion and PVDF as binders with carbon black as conductive additive exhibited the highest current response and lowest charge-transfer resistance. When coupled with this optimized electrode, the PVDF/GO membrane delivered the best desalination performance, achieving an ion removal efficiency of 68%, a salt adsorption capacity (SAC) of 775.40 mg/g, and a specific energy consumption (SEC) of 16.17 kJ/mole values superior to those reported in the literature. Full article

A novel membrane was synthesized in this work by grafting 1-vinyl-3-ethylimidazolium tetrafluoroborate ([C₂VIm][BF₄]) onto a polyvinylidene fluoride (PVDF) backbone, followed by the introduction of a sulfonated graphene oxide (SGO) dispersion into the polymer solution. This composite was transformed into a composite proton-conducting membrane via a solution casting process and subsequently underwent protonation. Successful grafting was confirmed using analytical techniques including Fourier Transform Infrared Spectroscopy (FTIR), ¹H Nuclear Magnetic Resonance (NMR) and X-ray Photoelectron Spectroscopy (XPS). Scanning Electron Microscopy with Energy Dispersive X-ray Spectroscopy (SEM-EDS) analysis verified the homogeneous distribution of the SGO filler. Analysis reveals that incorporating SGO as a filler substantially augments the performance of anion exchange membranes. Key enhancements include a tensile strength increase to 37.97 MPa, water uptake of 10.34%, an ion exchange capacity of 1.68 mmol/g, and the through-plane proton conductivity of 15.47 mS/cm. While vanadium permeability rose marginally to 2.02 × 10⁻⁷ cm²/min, it remains drastically lower than that of Nafion 115. The composite proton-conducting membrane also displayed robust chemical stability. The membrane was finally integrated into a vanadium redox flow battery (VRFB) for performance evaluation. At a current density of 100 mA/cm², it exhibits a satisfactory coulombic efficiency (CE) of 97.84%, excellent capacity retention, and superior cycling stability. These results demonstrate that the PVDF-g-IL/SGO-based composite proton-conducting membrane is an ideal candidate material for vanadium flow battery applications. Full article