Search Results (787)

This study examines the potential use of rejected and discarded grains from the common bean industry as a starch source for producing plasticized films with glycerol. The observed morphological characteristics of starch granules from discarded grains were diverse, with round, oval, and kidney-like shapes and sizes ranging from 7 to 34 µm. We determined the pasting profile: the pasting temperature (GT) fell between 72 °C and 74 °C, while the peak viscosity (P_v) demonstrated a significant rise at 10% and 15% starch concentrations. To better understand pasting behavior, mathematical modeling was employed to predict P_v behavior, with an R² value of 0.98. All film formulations were successful, yielding transparent, homogeneous, odorless, flexible films with smooth surfaces. Scanning electron microscopy analysis of the films revealed a flawless surface devoid of fissures, cracks, and pores, displaying a rough texture with a consistent structure and some starch granules resembling empty sacks due to amylose and amylopectin leaching. The highest tensile strength was observed with 6% starch and 1.5 mL of glycerol and the lowest with 4.5% starch and 3.9 mL of glycerol. The findings suggest that starch derived from discarded grains from the bean industry has unique characteristics and properties, making it a promising alternative source for intelligent packaging development. Full article

ZnO thin films were deposited on soda–lime glass substrates using the chemical spray pyrolysis method at a temperature of 500 °C. After the deposition, the substrates were irradiated with 10 keV H⁺ and Ar⁺ ions using a Colutron ion gun. We investigated the optical, structural, and morphological properties of the irradiated samples using Rutherford Backscattering Spectrometry, Ultraviolet and Visible Spectroscopy, X-ray diffraction, and Scanning Electron Microscopy. Our results showed a slight decrease in the optical band gap of the irradiated samples, which can be attributed to the quantum confinement effect caused by changes in the crystallite size. The diffractograms displayed diffraction peaks corresponding to the characteristic planes of the hexagonal wurtzite phase of ZnO, indicating that the films were polycrystalline with a preferential orientation along the c-axis. We also observed a reduction in the average crystallite size of the samples after ion irradiation. The morphological study showed that the average grain size increased and the shape changed from spherical in the pristine sample to flake-like after irradiation. Additionally, the samples irradiated with Ar⁺ ions exhibited a bimodal distribution in grain size, which is attributed to the defects and nucleation centers generated during the irradiation process. Full article

Beaches are important geomorphic units shaped by land–sea interactions. Changes in their profiles and surface sediments are directly influenced by both natural processes and human activities. This study is based on continuous topographic and sediment monitoring from 2021 to 2023 on the open and sheltered beaches of Puqian Bay, Hainan Island. It investigates the interannual profile evolution and the spatiotemporal response of sediment grain size under the influence of an artificial island. The results show that the Guilinyang Beach profile is mainly characterized by seasonal erosion–accretion cycles and the seaward migration of sandbars, while the Hilton Beach profile has undergone long-term erosion. At Hilton, sediment grain size changes are strongly coupled with profile erosion and accretion. Seasonal waves drive spatial differences in both profile and grain-size variation across Puqian Bay. The artificial island has reshaped local alongshore sediment transport and wave energy distribution. This has led to continuous erosion and coarsening in the open sector, while the sheltered sector remains morphologically stable. These findings reveal the spatiotemporal response patterns of headland-bay beaches under both natural and anthropogenic forcing, and provide scientific evidence for understanding coastal sediment dynamics and the impacts of artificial structures. Full article

Nanoparticle superlattices—periodic assemblies of uniformly spaced nanocrystals—bridge the nanoscale precision of individual particles with emergent collective properties akin to those of bulk materials. Recent advances demonstrate that multivalent ions and charged polymers can guide the co-assembly of nanoparticles, imparting electrostatic gating and enabling semiconductor-like behavior. However, the specific roles of anion geometry, valency, and charge density in mediating ion transport remain unclear. Here, we employ coarse-grained molecular dynamics simulations to investigate how applied electric fields (0–0.40 V/nm) modulate ionic conductivity and spatial distribution in trimethylammonium-functionalized gold nanoparticle superlattices assembled with four phosphate anions of distinct geometries and charges. Our results reveal that linear anions outperform ring-shaped analogues in conductivity due to higher charge densities and weaker interfacial binding. Notably, charge density exerts a greater influence on ion mobility than size alone. Under strong fields, anions accumulate at nanoparticle interfaces, where interfacial adsorption and steric constraints suppress transport. In contrast, local migration is governed by geometrical confinement and field strength. Analyses of transition probability and residence time further indicate that the rigidity and delocalized charge of cyclic anions act as mobility barriers. These findings provide mechanistic insights into the structure–function relationship governing ion transport in superlattices, offering guidance for designing next-generation ion conductors, electrochemical sensors, and energy storage materials through anion engineering. Full article

Arabinogalactan proteins (AGPs: hydroxyproline-rich glycoproteins) are ubiquitous in plants and play various functions in cases of development and reproduction. In Arabidopsis thaliana some AGPs can work as markers for gametophytic cell differentiation (among others embryological structures they mark generative cell wall and/or plasma membrane, and also sperm cells). However, apart from Arabidopsis, this labeling of generative cell and sperm cells in pollen grains has only been observed in a few flowering plant species belonging to dicotyledons. No such studies are available in monocotyledons. The main aim of our study was to see whether AGPs would be present at the generative cell–vegetative cell interface in different monocotyledons (representatives of Asparagaceae, Amarylidaceae and Liliaceae), and we also wanted to test whether they would be the same AGPs as in dicotyledons. For the study, we selected Gagea lutea (L.) Ker Gawl., Ornithogalum nutans L. and Galanthus nivalis L. species that differ in shape and size of generative cells. Antibodies against arabinogalactan proteins AGPs were used, including JIM8, JIM13, JIM14, MAC207, LM2, LM14, JIM15 and JIM4. The localization of the examined compounds was determined using immunohistochemistry techniques. The key finding was that AGPs (detected with JIM8 and JIM13 antibodies) consistently mark the boundary between the generative cell and the surrounding vegetative cytoplasm, suggesting their association with the generative cell–vegetative cell interface in all species studied. Identifying such molecular markers in male gametophyte may enhance the understanding of gametophytic cell fate, sperm cell identity and the molecular mechanisms underlying fertilization. Such labeling may also be useful in studies on pollen development, species comparisons, or responses to environmental stresses. Full article

The main aim of this work is to define the limits of detection (LOD) and quantification (LOQ) for polyethylene (PE) particles using a pyrolysis and oxidation-based method, the thermal Rock-Eval^® device, combined with a mathematical extrapolation procedure. The influences of particle size and shape on the thermal degradation of PE polymers are also investigated in this study. Thermal Total HC and Tpeak parameters, recently used to characterize polymer samples, are evaluated as a function of both polymer grain size and shape. Results indicate a LOD for the investigated PE polymers of around 1.7–2 μg in 60 mg of composite sediment (28–33 ppm). A conservative LOQ for the PE samples ranges between 5 and 6 μg (83–100 ppm). The LOQ is on the same order of magnitude for any size or shape of the studied PE polymers. By contrast, the LOD for the PE samples is slightly affected by both the polymer grain size and shape. Results also demonstrate that it is possible to detect PE nanoparticles of 79 nm in size. Finally, this study provides specific Rock-Eval^® parameters, linear regressions, and a mathematical extrapolation procedure that can be used to better quantify very small PE mass contents, including nanoplastics in environmental samples. Full article

The hot deformation behavior of a Mg-9.2Er-4.9Sm-2.2Zn-0.6Zr (wt.%) alloy, with emphasis on the role of grain size and long-period stacking-ordered (LPSO) phases, was examined via comparison experiments. Two types of samples were obtained through distinct heat treatment schedules: sample A had a smaller grain size, featuring block-shaped LPSO phases at grain boundaries and lamellar LPSO phases within grains, while sample B had a larger grain size and few LPSO phases. The hot deformation behavior was characterized by the true stress–strain curve within the processing window of 300–450 °C and 0.001–1 s⁻¹. The block-shaped LPSO phases contributed more significantly to strain hardening, leading to elevated flow stress in sample A, particularly under low-temperature and high-strain-rate conditions. Through the particle-stimulated nucleation (PSN) mechanism, block-shaped LPSO phases demonstrated greater efficiency in promoting Dynamic recrystallization (DRX) compared to lamellar LPSO phases; additionally, the synergistic effect between LPSO phases and grain boundary density further improved DRX efficiency. During hot deformation, dynamic precipitation of both block-shaped and lamellar LPSO phases occurred. The formation of block-shaped phases required a longer duration than that of lamellar ones. The presence of the LPSO kink exerted an influence on DRX, while a significant angle kink can promote DRX. Full article

The aim of the present study is to investigate the mechanism behind corrosion destruction in laser-melted layers (LMLs) of AISI 321 austenitic stainless steel after electrochemical corrosion in Ringer’s solution. Surface morphology, microstructure, chemical composition, grain sizes, and orientation are studied using OM, SEM, EDS, and EBSD. It was confirmed that (1) the main mechanism behind corrosion destruction is identical between untreated and laser-melted steel, i.e., the selective destruction of the lower corrosion resistance phase (δ-ferrite) in the form of pits, and (2) the morphology and size of corrosion pits are different, as determined via δ-ferrite morphology, with narrow deep pits of uneven shape observed on the surface of wrought steel and rounded shallower pits seen in LML. The following mechanism is proposed with regard to corrosion destruction in LML: (1) the initial destruction of δ-ferrite; (2) the formation of an austenitic dendrite network; (3) the mechanical fracture of austenitic dendrites and pit formation; and (4) the growth of pits inside the grain. The following relationship between corrosion pit development and dendrite orientation in the LML is observed: (1) In the melted zone, with dendrite axes perpendicular to or inclined toward the surface, the corrosion pit grows within the grain. (2) At the melted zone/base metal (MZ/BM) boundary, with dendrite axes parallel to the surface, the corrosion pit develops in the heat-affected zone, along the MZ/BM boundary. Full article

With the rapid development of additive manufacturing technology, selective laser melting (SLM) of austenitic stainless steel has been widely used. SLM stainless steel will inevitably deform during service, so it is necessary to study the microstructure and macro properties of post-plastic deformed SLM stainless steel. In this paper, the changes in the microstructure, mechanical properties, and corrosion resistance of SLM304 stainless steel after stretch deformation were studied, and the evolution rules were revealed. The results show that, with an increasing plastic deformation amount, SLM304 stainless steel exhibits grain fragmentation, disordered orientation, and subgrain formation, along with changes in the shape and size of the cellular structure. Additionally, the α’ martensite content inside SLM304 stainless steel rises significantly, while the thickness of the surface passivation film slightly decreases. The analysis shows that the combined effect of the complex microstructure makes the nanohardness of SLM304 stainless steel increase with the increase in the stretch deformation amount while its corrosion resistance deteriorates. Therefore, moderate post-plastic deformation can enable SLM stainless steel to balance excellent mechanical and corrosion properties. This study can not only provide a theoretical reference for the performance optimization of additive manufacturing steel but also provide value for the engineering application of additive manufacturing technology. Full article

Twin-roll strip casting (TRSC) is a key development in near-net-shape casting technology, offering the potential for high-efficiency and low-cost production. During the TRSC process, the solidification characteristics of the strip are largely governed by the configuration of the melt delivery system as well as by various process parameters. In this study, a three-dimensional model of low-carbon steel strip casting was developed using ProCAST software to investigate microstructure evolution under industrial-scale conditions. Simulation results revealed that the solidified strip exhibits a typical three-layer structure: a surface equiaxed grain zone in contact with the cooling rolls, a subsurface columnar grain zone, and a central equiaxed grain zone. Introducing side holes into the delivery system promoted the formation of a distinct columnar grain region near the side dams, resulting in a reduction in the average grain size in this region from 43.7 μm to 38.2 μm compared to the delivery system without side holes. Increasing the heat transfer coefficient at the interface between the molten pool and the cooling rolls significantly enlarged the columnar grain zone. This change had little effect on the average grain size and grain density, with the average grain size remaining close to 37 μm and the grain density variation being less than 0.7%. In contrast, when the casting speed was raised from 50 m min⁻¹ to 70 m min⁻¹, a reduction in the area of the columnar grain zone was observed, while the average grain size decreased slightly (by less than 0.5 μm), and the grain density increased accordingly. This study provides valuable insights for optimizing process parameters and designing more effective melt delivery systems in industrial twin-roll strip casting. Full article

Low energy N⁺ ion beam implantation has been used to create the novel rice mutant “shuangli”, which produces partially fertile spikelets containing double grains. Abnormal ovule development is a major cause of partial fertility and grain diversity in rice mutants. To elucidate the developmental mechanism of ovule diversity in shuangli, ovules undergoing development were stained using eosin Y and H33342 and observed using confocal laser scanning microscopy. Different developmental abnormalities were observed in the ovary, embryo sac, and ovule. Abnormal development was observed in 35.18% of the ovary structures, primarily manifesting as “tumor” like cell clusters, “false ovaries”, stamen degeneration, and double ovaries. In the embryo sac, abnormal development occurred in about 17.35% of the megaspore cells, including the formation of three nuclei, two daughter cells of asynchronously divided dyads, multiple megaspore tetrads, and “narrow and elongated” cavities. At the female gametogenesis stage, the abnormal development rate was 27.53%, mainly involving the degeneration of the central polar nucleus, egg apparatus, antipodal cell mass, or female germ unit. In shuangli, abnormal development occurred in 28.06% of the ovule structures, including lateral tissue, nucellar tissue, double ovules and double embryo sacs. Of the observed lateral tissues, 8.27% did not differentiate into sexual reproductive tissue, which affected the fertilization of the embryo sac, leading to atrophy and degeneration. A new abnormal tissue similar to the inner integument was found on both sides of the nucellar tissue, and the two specialized nucellar tissues appeared to have “staggered” growth within a single ovary. Of the examined ovules, 10.79% exhibited different types of double ovules, including heart-shaped, “anatropous”, “conjoined” structures. However, the double ovules typically developed synchronously, explaining the production of different sizes of the two grains in shuangli. In addition, “double” embryo sacs from two “twinborn” nucelli were found in one ovule, and the frequency of “double” embryo sacs was 3.60%. Therefore, ovule development diversity may result in fertilization or gradual degeneration after fertilization, explaining the lower fertility of shuangli at the embryological level. Full article

Granular jamming grippers have emerged as a versatile solution in soft robotics due to their ability to manipulate objects of various shapes and sizes, earning them the label of “universal grippers”. They are composed of granular material confined within an elastic membrane that conforms to the object like a fluid and solidifies upon vacuum application, enabling a firm grip through friction and grain interlocking. This work provides a systematic review of the state of the art, addressing their physical principles, the influence of grain and membrane properties, performance characterization methods, and applications across diverse fields. Additionally, the main control variables of these grippers closely related to state variables used in control systems are discussed, along with the current knowledge gaps. Finally, five potential directions for future research are proposed. Full article

Grain shape is a critical determinant of rice yield, quality, and market value. Recent advances in molecular biology, genomics, and systems biology have revealed a complex regulatory network governing grain development, integrating genetic loci, plant hormone signaling, transcriptional regulation, protein ubiquitination, epigenetic modifications, and environmental cues. This review summarizes key genetic components such as QTLs, transcription factors, and hormone pathways—including auxin, cytokinin, gibberellin, brassinosteroids, and abscisic acid—that influence seed size through regulation of cell division, expansion, and nutrient allocation. The roles of the ubiquitin–proteasome system, miRNAs, lncRNAs, and chromatin remodeling are also discussed, highlighting their importance in fine-tuning grain development. Furthermore, we examine environmental factors that impact grain filling and size, including temperature, light, and nutrient availability. We also explore cutting-edge breeding strategies such as gene editing, functional marker development, and wild germplasm utilization, along with the integration of multi-omics platforms like RiceAtlas to enable intelligent and ecological zone-specific precision breeding. Finally, challenges such as pleiotropy and non-additive gene interactions are discussed, and future directions are proposed to enhance grain shape improvement for yield stability and food security. Full article

Coastal waters are sensitive habitats that support high biodiversity and provide essential ecosystem goods. Changes in sedimentation regimes due to land-use and engineering activities in the coastal zone affect biodiversity and these habitats’ ecological value. This study aims to characterize the meiobenthic communities inhabiting the Zwin tidal lagoon, located on the border between Belgium and the Netherlands, and to evaluate to what extent the sedimentological characteristics and the quantity and composition of organic matter influence the composition and distribution of meiofauna. The meiobenthic community showed traits of a well-established population dominated by nematodes, followed by copepods + nauplii. Notably, meiofauna rapidly colonized the area after its opening to the sea in February 2019 (two years before sampling), showing that even very weak tidal currents were sufficient to suspend and transport these animals to the new environment. Our results suggest that the Zwin lagoon is a productive system with high food quality (i.e., PRT/CHO ≥ 1), predominantly of marine origin. Major structural differences in communities were related to the sedimentary environments at the investigated stations and estimations of the quantity of food. The present findings confirm that sedimentary dynamics and depositional processes, through their influence on sediment properties (e.g., grain size) and organic matter’s quantity and composition, shape meiofaunal communities and their vertical and horizontal distributions. Full article

Background/Objectives: Emerging evidence suggests the critical role of diet in shaping mental health outcomes, which are increasingly prevalent among children and adolescents worldwide. This study aims to investigate whether the dietary habits of children in the Italian multicenter Piccolipiù birth cohort at four years of age were associated with anxiety and depression symptoms. This analysis was conducted within the framework of the Global burden of disease Lifestyle And mental Disorder (GLAD) Project (DERR2-10.2196/65576). Methods: Data from 1726 children were analyzed. Emotional symptoms were assessed with the Child Behavior Checklist (CBCL), and diet was assessed using a food frequency questionnaire. Sociodemographic data, including per capita income, were also collected. Associations between food intake (grams per day) and clinical anxiety/depression (T-scores > 70) or total symptom scores were examined using univariate and multivariable logistic and robust linear regressions adjusted for sex and income. Results: In 1726 children (median age 4.4 years; 50% female), 3% exhibited clinical anxiety and 2% clinical depression. Higher grain intake was associated with increased odds of clinical anxiety (OR = 1.004; 95% CI: 1.001–1.007), while greater fish consumption reduced odds of clinical depression (OR = 0.946; 95% CI: 0.903–0.992). Vegetable intake was associated with lower anxiety and depression scores. Multivariable analyses confirmed that grain intake is positively associated with anxiety, while fish consumption is inversely associated with depression. Conclusions: Higher intake of vegetables, fruits, and fish may be associated with better emotional health in preschoolers, although effect sizes were modest. Early dietary interventions may offer a practical approach to improving children’s long-term mental health. Longitudinal studies are needed to confirm these associations and clarify underlying mechanisms. Full article