Search Results (9)

Monitoring air pollution remains a significant challenge for both environmental policy and public health, particularly in parts of Eastern Europe where industrial structures are undergoing transition. In this paper, we examine long-term air quality trends in Poland between 1990 and 2023, drawing on multiple sources: satellite observations (from 2019 to 2025), ground-based stations, and official national emission inventories. The analysis focused on sulfur dioxide (SO₂), nitrogen dioxide (NO₂), and particulate matter (PM₁₀, PM_2.5). Data were obtained from the Sentinel-5P TROPOMI sensor, processed through Google Earth Engine, and monitored by the Chief Inspectorate of Environmental Protection (GIOŚ, Warsaw, Poland) and the National Inventory Report (NIR, Warsaw, Poland), compiled by KOBiZE (The National Centre for Emissions Management, Warsaw, Poland). The results show a decline in emissions. SO₂, for instance, dropped from about 2700 kilotons in 1990 to under 400 kilotons in 2023. Ground-based measurements matched well with inventory data (correlations around 0.75–0.85), but the agreement was noticeably weaker when satellite estimates were compared with surface monitoring. In addition to analyzing emission trends, this study examined the relationship between pollution levels and meteorological conditions across major Polish cities from 2019 to mid-2024. Pearson’s correlation analysis revealed strong negative correlations between temperature and pollutant concentrations, especially for SO₂, reflecting the seasonal nature of pollution peaks during colder months. Wind speed exhibited ambiguous relationships, with daily data indicating a dilution effect (negative correlations), whereas monthly averages revealed positive associations, likely due to seasonal confounding. Higher humidity was consistently linked to higher pollution levels, and precipitation showed weak negative correlations, likely influenced by seasonal weather patterns rather than direct atmospheric processes. These findings suggest that combining different monitoring methods, despite their quirks and mismatches, provides a fuller picture of atmospheric pollution. They also point to a practical challenge. Further improvements will depend less on sweeping industrial reform and more on shifting everyday practices, like how homes are heated and how people move around cities. Full article

The growing demand for natural anti-aging ingredients necessitates scientific validation of traditional cosmetic materials. Multani Mitti (MM), a clay widely used in South Asian traditional skincare, lacks comprehensive chemical and biological characterization. This study employed a multi-analytical approach to investigate MM’s anti-aging potential through chemical analysis, enzyme inhibition studies, and in silico evaluations. Five commercial MM samples were pooled and analyzed using instrumental neutron activation analysis (INAA) and Gas Chromatography–Mass Spectrometry (GC-MS). INAA revealed silicon as the predominant inorganic constituent (169.3742 mg/g), while GC-MS identified 13 bioactive compounds, with Beta-sitosterol (15.45% area), Docosanamide (12.36% area), and Cyclohexasiloxane (9.80% area) being the most abundant. MM demonstrated significant enzyme inhibition against key aging-related enzymes, with notably strong effects on hyaluronidase (IC₅₀: 18 μg/mL) and tyrosinase (IC₅₀: 27 μg/mL), outperforming standard inhibitors. The antioxidant activity showed moderate effectiveness (IC₅₀: 31.938 μg/mL) compared to ascorbic acid (IC₅₀: 8.5 μg/mL). Molecular docking studies of identified compounds against hyaluronidase (PDB: 1FCV) and tyrosinase (PDB: 3NQ1) revealed Beta-sitosterol and Benzyl-piperazine-carboxamide as the most promising candidates, showing strong binding affinities (−8.5 and −8.6 kcal/mol, respectively) and favorable ADMET profiles. This comprehensive characterization provides the first scientific evidence supporting MM’s traditional use in skincare and identifies specific compounds that may contribute to its anti-aging properties, warranting further investigation for modern cosmetic applications. Full article

The ever-increasing technological advancement and industrialization are leading to a massive discharge of hazardous waste into the aquatic environment, calling on scientists and researchers to introduce environmentally benign solutions. In this regard, the current work is based on introducing Fuller’s earth, which is regarded as an environmentally benign material, as an innovative Fenton oxidation technology to treat effluent loaded with Levafix Dark Blue dye. Initially, Fuller’s earth was chemically and thermally activated, then subjected to characterization using a field-emission scanning electron microscope (FE-SEM) augmented with an energy-dispersive X-ray analyzer (EDX) and Fourier transform infrared (FTIR). This detailed the morphologies of the samples and the functional groups on the catalyst leading to the reaction with the dye. Fuller’s earth, augmented with hydrogen peroxide, was then introduced as a photo-Fenton oxidation system under UV illumination for dye oxidation. Moreover, a response surface mythological analysis was applied to optimize the most effective operational parameters. The experimental data revealed that the optimal Fuller’s earth dose corresponded to 1.02 mg/L using the optimal H₂O₂ of 818 mg/L at pH 3.0, and the removal efficiency reached 99%. Moreover, the thermodynamic parameters were investigated, and the data revealed the positive ∆G′ and negative ∆S′ values that reflect the non-spontaneous nature of oxidation at high temperatures. Additionally, the negative ∆H′ values suggest the occurrence of the endothermic oxidation reaction. Furthermore, the reaction followed the second-order kinetic model. Finally, the catalyst stability was investigated, and reasonable removal efficiency was attained (73%) after the successive use of Fuller’s earth reached six cyclic uses. Full article

This paper presents a detailed review of the streaming electrification phenomena of different insulating fluids for power transformers. The comparison of different techniques used to assess the charging tendency of fluids is discussed depending on the flow type (planar or centrifugal), volume of oil, and interface material. The charge separation between the insulating fluid and metallic/pressboard interfaces is explained in terms of the electrical double layer formation involving a fixed layer and diffuse layer. Based on the experimental results, the streaming electrification is observed to be a function of various factors such as speed, temperature, electric field, and surface roughness. Depending on the molecular structure of insulating liquids that come into contact with solid insulation at the interface, the streaming current can increase; hence, a suitable additive (benzotriazole, fullerene, Irgamet 39) is selected based on the type of fluid and charge polarity. The degradation of the insulating liquid upon ageing, which increases the streaming current and reclamation of such aged fluids using adsorbents (Fuller’s earth, activated carbon, bentonite, and alumina), is a possible method to suppress the static current through improving its dielectric properties. The nanofluids show a higher streaming current compared to base fluid with no change observed even after the reclamation process. The energization process using alternating current (AC) and direct current (DC) impacts the streaming phenomenon depending on its magnitude and polarity. The diffusion of sulfur compounds in the insulating liquid is another major hazard to transformers because the sulfide ions affect the physio-chemical reaction at the interface material, which is responsible for the formation of streaming current. Full article

The present study was aimed to assess the efficacy of individual and combined effects of novel fuller earth, rock phosphate, and biochar (grapefruit peel) at 1% dosage on maize plant growth, soil chemical properties anduptake of toxic metals (TMs), such as Cu, Zn, Fe, and Cd, by maize plant sown in Korangi (district of Karachi, Pakistan) heavily polluted and Korangi less polluted (K-HP and K-LP) soils. The obtained results indicate that the dry biomass of maize crop increased by 14.13% with combined (FE1% + GBC1%) on K-HP soil and 18.24% with combined (FE 1% + GBC 1%) effects on K-LP soil. The maximum immobilization of Cu, Zn, Fe, and Cd was observed by 36% with GBC1%, 11.90% with FE1%, 98.97% with combined RP1% + GBC1%, 51.9% with FE1% + GBC1% for K-HP, 11.90% with FE1%, 28.6% with FE1%, 22.22% with RP1% + GBC1%, and 57.05% with FE 1% + GBC 1% for K-LP soil. After the addition of proposed substances, modification of soil OM, SOC, TOC, and pH level appeared this lead to the changes in the phyto-availability of Cu, Zn, Fe, and Cd in maize plant. It was concluded that the application of individual and combined effects of novel fuller earth, rock phosphate, and biochar (grapefruit peel) have potential to stabilize pollutants from multi-metal polluted soils for safe crop production. Full article

Immobilization is a method for making an enzyme more robust in the environment, especially in terms of its stability and reusability. A mutant phosphotriesterase (YT PTE) isolated from Pseudomonas dimunita has been reported to have high proficiency in hydrolyzing the S_p and R_p-enantiomers of organophosphate chromophoric analogs and therefore has great potential as a decontamination agent and biosensor. This work aims to investigate the feasibility of using Fuller’s earth (FE) as a YT PTE immobilization support and characterize its biochemical features after immobilization. The immobilized YT PTE was found to show improvement in thermal stability with a half-life of 24 h compared to that of the free enzyme, which was only 8 h. The stability of the immobilized YT PTE allowed storage for up to 4 months and reuse for up to 6 times. The immobilized YT PTE showed high tolerance against all tested metal ions, Tween 40 and 80 surfactants and inorganic solvents. These findings showed that the immobilized YT PTE became more robust for use especially with regards to its stability and reusability. These features would enhance the future applicability of this enzyme as a decontamination agent and its use in other suitable industrial applications. Full article

Saturation effects limit the application of vegetation indices (VIs) in dense vegetation areas. The possibility to mitigate them by adopting a negative soil adjustment factor X is addressed. Two leaf area index (LAI) data sets are analyzed using the Google Earth Engine (GEE) for validation. The first one is derived from observations of MODerate resolution Imaging Spectroradiometer (MODIS) from 16 April 2013, to 21 October 2020, in the Apiacás area. Its corresponding VIs are calculated from a combination of Sentinel-2 and Landsat-8 surface reflectance products. The second one is a global LAI dataset with VIs calculated from Landsat-5 surface reflectance products. A linear regression model is applied to both datasets to evaluate four VIs that are commonly used to estimate LAI: normalized difference vegetation index (NDVI), soil adjusted vegetation index (SAVI), transformed SAVI (TSAVI), and enhanced vegetation index (EVI). The optimal soil adjustment factor of SAVI for LAI estimation is determined using an exhaustive search. The Dickey-Fuller test indicates that the time series of LAI data are stable with a confidence level of 99%. The linear regression results stress significant saturation effects in all VIs. Finally, the exhaustive searching results show that a negative soil adjustment factor of SAVI can mitigate the SAVIs’ saturation in the Apiacás area (i.e., X = −0.148 for mean LAI = 5.35), and more generally in areas with large LAI values (e.g., X = −0.183 for mean LAI = 6.72). Our study further confirms that the lower boundary of the soil adjustment factor can be negative and that using a negative soil adjustment factor improves the computation of time series of LAI. Full article

Fuller’s earth spherical beads using chitosan as a binder were prepared for the removal of strontium ions from aqueous solution. The adsorbents were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), which revealed the porous nature of the beads. The Brunauer–Emmett–Teller (BET) surface area of the beads was found to be 48.5 m²/g. The adsorption capacities of the beads were evaluated under both batch and dynamic conditions. The adsorption capacity was found to be ~29 mg/g of adsorbent at 298 K when the equilibrium concentration of strontium in the solution was 925 mg/L at pH 6.5. The X-ray photoelectron spectroscopy (XPS) data suggest that strontium uptake by the beads occurs mainly through an ion-exchange process. Kinetic data indicate that the sorption of strontium onto the beads follows anomalous diffusion. Thermodynamic data suggest that the ion-exchange of Sr²⁺ on the bead surface was feasible, spontaneous and endothermic in nature. Full article

The urban transition that has emerged over the past quarter century poses new challenges for mapping land cover/land use change (LCLUC). The growing archives of imagery from various earth-observing satellites have stimulated the development of innovative methods for change detection in long-term time series. We tested two different multi-temporal remote sensing datasets and techniques for mapping the urban transition. Using the Red River Delta of Vietnam as a case study, we compared supervised classification of dense time stacks of Landsat data with trend analyses of an annual series of night-time lights (NTL) data from the Defense Meteorological Satellite Program-Operational Linescan System (DMSP-OLS). The results of each method were corroborated through qualitative and quantitative GIS analyses. We found that these two approaches can be used synergistically, combining the advantages of each to provide a fuller understanding of the urban transition at different spatial scales. Full article