Search Results (6)

Shunting locomotives exhibit a wide and unpredictable range of power profiles. This unpredictability makes it impossible to rely on offline optimizations or predictive methods combined with online optimization. To maintain optimal performance across this broad range of operating conditions, the online control strategy must be robust. This article proposes a robust method to determine the optimal parameter combinations for an online energy management strategy of a hybrid fuel cell battery shunting locomotive, ensuring optimality across all scenario conditions. The first step involves extracting a statistically representative subspace for simulation, both in terms of parameter combinations and scenario conditions. A response surface model (numerical twin) is then constructed to extrapolate results across the entire space based on this simulated subspace. Using this model, the optimal solution is identified through metaheuristic algorithms (minimization search). Finally, the proposed solution is validated against a set of expert-defined scenarios. The result of the methodology ensures robust optimization across an infinite number of scenarios by minimizing the impact on both the fuel cell and the battery, without increasing mission costs. Full article

With the increasing severity of global environmental issues and the pressure from the strict pollutant emission regulations proposed by the International Maritime Organization (IMO), the shipping industry is seeking new types of marine power systems that can replace traditional propulsion systems. Marine fuel cells, as an emerging energy technology, only emit water vapor or a small amount of carbon dioxide during operation, and have received widespread attention in recent years. However, research on their application in the shipping industry is relatively limited. Therefore, this paper collects relevant reports and literature on the use of fuel cells on ships over the past few decades, and conducts a thorough study of typical fuel cell-powered vessels. It summarizes and proposes current design schemes and optimization measures for marine fuel cell power systems, providing directions for further improving battery performance, reducing carbon emissions, and minimizing environmental pollution. Additionally, this paper compares and analyzes marine fuel cells with those used in automotive, aviation, and locomotive applications, offering insights and guidance for the development of marine fuel cells. Although hydrogen fuel cell technology has made significant progress in recent years, issues still exist regarding hydrogen production, storage, and related safety and standardization concerns. In terms of comprehensive performance and economics, it still cannot effectively compete with traditional internal combustion engines. However, with the continued rapid development of fuel cell technology, marine fuel cells are expected to become a key driver for promoting green shipping and achieving carbon neutrality goals. Full article

Conventional methods of parameterizing fuel cell hybrid power systems (FCHPS) often rely on engineering experience, which leads to problems such as increased economic costs and excessive weight of the system. These shortcomings limit the performance of FCHPS in real-world applications. To address these issues, this paper proposes a novel method for optimizing the parameter configuration of FCHPS. First, the power and energy requirements of the vehicle are determined through traction calculations, and a real-time energy management strategy is used to ensure efficient power distribution. On this basis, a multi-objective parameter configuration optimization model is developed, which comprehensively considers economic cost and system weight, and uses a particle swarm optimization (PSO) algorithm to determine the optimal configuration of each power source. The optimization results show that the system economic cost is reduced by 8.76% and 18.05% and the weight is reduced by 11.47% and 9.13%, respectively, compared with the initial configuration. These results verify the effectiveness of the proposed optimization strategy and demonstrate its potential to improve the overall performance of the FCHPS. Full article

In order to decarbonize the rail industry, the development of innovative locomotives with the ability to use multiple energy sources, constituting hybrid powertrains, plays a central role in transitioning from conventional diesel trains. In this paper, four configurations based on suitable combinations of fuel cells and/or batteries are designed to replace or supplement a diesel/overhead line powertrain on a real passenger train (the Hitachi Blues) tested on an existing regional track, the Catanzaro Lido–Reggio Calabria line (Italy), managed by Trenitalia SpA. (Italy). The configurations (namely battery–electrified line, full-battery, fuel cell–battery–electrified line, and fuel cell–battery) are first sized with the intention of completing a round trip, then integrated on board with diesel engine replacement in mind, and finally occupy a portion of the passenger area within two locomotives. The achieved performance is thoroughly examined in terms of fuel cell efficiency (greater than 47%), hydrogen consumption (less than 72 kg), braking energy recovery (approximately 300 kWh), and battery interval SOC. Full article

As one of the most environmentally friendly energy sources today, fuel cells have become the focus of research in countries around the world, especially in the electric transportation field. This paper mainly studies the modeling of fuel cell hybrid locomotives (FCHL) including fuel cells, batteries, motors, and energy management systems. To increase the operating efficiency and improve the performance of FCHL, a modified fuzzy logic-based energy management system (MFL-EMS) is proposed and compared with the traditional power flow energy management system (PF-EMS). Meanwhile, a modified fuel cell hybrid power system model for locomotives is proposed, taking into account the traction motor features that, compared with a simplified controlled source load, can directly reflect the status of the locomotive running speed and the output power of the traction motor load. The proposed system parameters and configurations are determined by combining the characteristics of power and energy density, response characteristics, and charging/discharging characteristics of fuel cells and batteries. The precise simulation results revealed that adopting the proposed MFL-EMS in comparison to the traditional PF-EMS, reduced the hydrogen consumption by 2.943%. Comparing the battery output voltage, it is confirmed that with MFL-EMS it tends to be steeper than the one with PF-EMS, showing the proposed strategy’s robustness. Overall, the obtained results revealed an improved performance in terms of power distribution as well as SOC, which means less hydrogen consumption and therefore a more economical solution. Full article

A hydrogen rail (hydrail) powertrain is conceptualized in this study, using drive cycles collected from the trains currently working on the Union Pearson Express (UPE) railroad. The powertrain consists of three preliminary different subsystems: fuel cell, battery, and hydrogen storage systems. A backward design approach is proposed to calculate the time-variable power demand based on a “route simulation data” method. The powertrain components are then conceptually sized according to the calculated duty cycle. The results of this study show that 275 kg of hydrogen is sufficient to satisfy the daily power and energy demand of a hydrogen locomotive with drive cycles similar to the ones currently working on the UPE rail route. Full article