Search Results (266)

Keratin, a fibrous structural protein, has been employed as a biomaterial for hemostasis and tissue repair due to its structural stability, mechanical strength, biocompatibility, and biodegradability. While extensive research has focused on developing scaffolds using keratin extracted from various sources, no studies to date have explored the use of keratin derived from human nail clippings. In this study, keratin was extracted from human nail clippings using the Shindai method and used to fabricate and compare two types of scaffolds for bone tissue engineering via the freeze-drying method. The first scaffold consisted of keratin combined with gelatin (KG), while the second combined keratin, gelatin, and hydroxyapatite (HAp) (KGH), the latter synthesized from blood cockle clam shells using the wet precipitation method. Physicochemical characterization and surface morphology analysis of keratin and both scaffolds showed promising results. Tensile strength testing revealed a significant difference in Young’s modulus. The KG scaffold exhibited higher porosity, water uptake, and water retention capacity compared to the KGH scaffold. In vitro biocompatibility studies revealed that the KGH scaffold supported higher cell proliferation compared to the KG scaffold. This study demonstrates the potential of using human nail-derived keratin in composite scaffold fabrication and serves as a foundation for future research on this novel biomaterial source. Full article

Electrospun fibers, possessing biomimetic characteristics similar to fibrous extracellular matrices, have attracted widespread attention as scaffold materials for skin tissue engineering. The topographical structure of electrospun fibers plays a critical role in determining cell behavior. However, the effects of fiber topography on human skin fibroblasts (HSFs) remain unclear. In this study, electrospinning technology was employed to investigate how parallel and crossed fiber architectures influence the spreading morphology, proliferation, and migration of HSFs. The results demonstrated that cells exhibited spindle-shaped elongation along single fibers; on closely spaced parallel fibers, cells formed cross-adhesions between adjacent fibers, with a fiber spacing of 30–60 μm serving as the threshold range for distinguishing individual cell behaviors. At fiber intersections, a characteristic spacing of 100 μm distinguished three distinct cellular responses: anchoring, turning, and bridging. The probability of a cell altering its preexisting migration path depended on its ability to extend laterally and reach adjacent fibers, which was constrained by the upper limit of the cell body’s minor axis. This study elucidated the unique role of the electrospun fiber topography in guiding cellular decision-making in complex microenvironments, provided important insights into topography-triggered cell migration, and highlighted the practical significance of material-guided strategies in tissue engineering. Full article

Bioactive glass (BG) is a promising material known for its osteogenic, osteoinductive, antimicrobial, and angiogenic properties. For this reason, melt-quench-derived BG powders embedded into composite electrospun poly(ε-caprolactone) (PCL) mats represent an interesting option for the fabrication of bioactive scaffolds. However, incorporating BG into nano-/micro-fibers remains challenging. Our research focused on integrating two BG compositions into the mat structure: 45S5 and 45S5_MS (the former being a well-known, commercially available BG composition, and the latter a magnesium- and strontium-enriched composition based on 45S5). Both BG types were added at concentrations of 10 wt.% and 20 wt.%. A careful grinding process enabled effective dispersion of BG into a PCL solution, resulting in fibers ranging from 500 nm to 2 µm in diameter. The mats’ mechanical properties were not hindered by the inclusion of BG powder within the fibrous structure. Furthermore, our results indicate that BG powders were successfully incorporated into the scaffolds, not only preserving their properties but potentially enhancing their biological performance compared to unloaded PCL electrospun scaffolds. Our findings indicate proper cell differentiation and proliferation, supporting the potential of these devices for tissue regeneration applications. Full article

This study presents a novel approach to fabricating magnetic sponge-like composites by melting various types of steel onto three-dimensional (3D) carbonized spongin scaffolds under extreme biomimetic conditions. Spongin, a renewable marine biopolymer with high thermal stability, was carbonized at 1200 °C to form a turbostratic graphite matrix capable of withstanding the high-temperature steel melting process (1450–1600 °C). The interaction between molten steel vapors and the carbonized scaffolds resulted in the formation of nanostructured iron oxide (primarily hematite) coatings, which impart magnetic properties to the resulting composites. Detailed characterization using SEM-EDX, HRTEM, FT-IR, and XRD confirmed the homogeneous distribution of iron oxides on and within the carbonized fibrous matrix. Electrochemical measurements further demonstrated the electrocatalytic potential of the composite, particularly the sample modified with stainless steel 316L—for the hydrogen evolution reaction (HER), offering promising perspectives for green hydrogen production. This work highlights the potential of extreme biomimetics to create functional, scalable, and sustainable materials for applications in catalysis, environmental remediation, and energy technologies. Full article

Nanotopography refers to the intricate surface characteristics of materials at the sub-micron (<1000 nm) and nanometer (<100 nm) scales. These topographical surface features significantly influence the physical, chemical, and biological properties of biomaterials, affecting their interactions with cells and surrounding tissues. The development of nanostructured surfaces of polymeric nanocomposites has garnered increasing attention in the fields of tissue engineering and regenerative medicine due to their ability to modulate cellular responses and enhance tissue regeneration. Various top-down and bottom-up techniques, including nanolithography, etching, deposition, laser ablation, template-assisted synthesis, and nanografting techniques, are employed to create structured surfaces on biomaterials. Additionally, nanotopographies can be fabricated using polymeric nanocomposites, with or without the integration of organic and inorganic nanomaterials, through advanced methods such as using electrospinning, layer-by-layer (LbL) assembly, sol–gel processing, in situ polymerization, 3D printing, template-assisted methods, and spin coating. The surface topography of polymeric nanocomposite scaffolds can be tailored through the incorporation of organic nanomaterials (e.g., chitosan, dextran, alginate, collagen, polydopamine, cellulose, polypyrrole) and inorganic nanomaterials (e.g., silver, gold, titania, silica, zirconia, iron oxide). The choice of fabrication technique depends on the desired surface features, material properties, and specific biomedical applications. Nanotopographical modifications on biomaterials’ surface play a crucial role in regulating cell behavior, including adhesion, proliferation, differentiation, and migration, which are critical for tissue engineering and repair. For effective tissue regeneration, it is imperative that scaffolds closely mimic the native extracellular matrix (ECM), providing a mechanical framework and topographical cues that replicate matrix elasticity and nanoscale surface features. This ECM biomimicry is vital for responding to biochemical signaling cues, orchestrating cellular functions, metabolic processes, and subsequent tissue organization. The integration of nanotopography within scaffold matrices has emerged as a pivotal regulator in the development of next-generation biomaterials designed to regulate cellular responses for enhanced tissue repair and organization. Additionally, these scaffolds with specific surface topographies, such as grooves (linear channels that guide cell alignment), pillars (protrusions), holes/pits/dots (depressions), fibrous structures (mimicking ECM fibers), and tubular arrays (array of tubular structures), are crucial for regulating cell behavior and promoting tissue repair. This review presents recent advances in the fabrication methodologies used to engineer nanotopographical microenvironments in polymeric nanocomposite tissue scaffolds through the incorporation of nanomaterials and biomolecular functionalization. Furthermore, it discusses how these modifications influence cellular interactions and tissue regeneration. Finally, the review highlights the challenges and future perspectives in nanomaterial-mediated fabrication of nanotopographical polymeric scaffolds for tissue engineering and regenerative medicine. Full article

Currently, there is an increasing demand for advanced materials that can address the needs of tissue engineering and have the potential for use in treatments targeting tumor cells, such as black bioactive materials in photothermal therapy. Thus, 3D fibrous scaffolds of black 45S5 bioactive glass were produced using the air-heated solution blow spinning (A-HSBS) technique, with polyvinylpyrrolidone (PVP) serving as a spinning aid and an oxygen vacancy-inducing agent. Glass powder with the same composition was synthesized via the sol-gel route for comparison. The samples were characterized using thermogravimetric analysis, X-ray diffraction, FTIR spectroscopy, and scanning electron microscopy, along with in vitro tests using simulated body fluid (SBF), phosphate-buffered saline (PBS), and TRIS solution. The results showed that PVP enhanced oxygen vacancy formation and stabilized the scaffolds at 600 °C. Doping with Zn and Mg ions reduced crystallization while significantly increasing the fiber diameters. Scaffolds doped with Zn exhibited lower degradation rates, delayed apatite formation, and hindered ionic release. Conversely, Mg ions facilitated greater interaction with the medium and rapid apatite formation, completely covering the fibers. The scaffolds showed no cytotoxicity in the MTT assay at concentrations of up to 200 µg/mL for HaCat cells and 0.8 mg/mL for L929 cells. This study demonstrated the effectiveness of using PVP in the production of black bioactive glass scaffolds, highlighting their potential for bone regeneration. Full article

The periodontal ligament (PDL) is a fibrous connective tissue that anchors the tooth-root surface to the alveolar bone with specific orientations. It plays a crucial role in functional restoration, optimal position stabilities, biomechanical stress transmission, and appropriate tissue remodeling in response to masticatory loading conditions. This pilot study explored spatial microarchitectures to promote PDL orientations while limiting mineralized tissue formation. A computer-designed perio-complex scaffold was developed with two parts: (1) PDL-guiding architectures with defined surface topography and (2) a bone region with open structures. After SEM analysis of micropatterned topographies on PDL-guiding architectures, perio-complex scaffolds were transplanted into two-wall periodontal defects in the canine mandible. Despite the limited bone formation at the 4-week timepoint, bone parameters in micro-CT quantifications showed statistically significant differences between the no-scaffold and perio-complex scaffold transplantation groups. Histological analyses demonstrated that the PDL-guiding architecture regulated fiber orientations and facilitated the functional restoration of PDL bundles in immunohistochemistry with periostin and decorin (DCN). The perio-complex scaffold exhibited predictable and controlled fibrous tissue alignment with specific angulations, ensuring spatial compartmentalization for PDL tissues and bone regenerations. These findings highlighted that the perio-complex scaffold could serve as an advanced therapeutic approach to contribute periodontal tissue regeneration and functional restoration in tooth-supporting structures. Full article

This study aimed to investigate the mechanisms by which large fibrous connective (LFC) tissue enhances fat graft survival in fat transplantation. A block fat graft model demonstrated that intact fat containing LFC showed significantly higher survival rates compared with liposuctioned fat. In the center of intact grafts, viable fat cells surrounded the LFC, forming a mesh-like living tissue structure. Proteomics of the extracellular matrix (ECM) adjacent to LFC (ALFC) and distant to LFC (DLFC) revealed significant differences in mitochondrial aspects. Staining of LFC tissue showed that it contains a large number of blood vessels and mitochondria, and exhibits stronger antioxidant capacity (p < 0.05) compared with adipose tissue. By mixing LFC with liposuctioned fat and transplanting into nude mice, histological sections showed that LFC promotes SOD1 expression, enhances respiratory chain RNA expression, and reduces ROS and inflammation. Pure mitochondrial-assisted fat transplantation only reduced short-term graft inflammation without improving long-term survival rates. In conclusion, LFC enhances long-term survival rates by reducing oxidative stress in fat grafts and forming a center for fat cell survival, thereby overcoming distance limitations. This represents a novel mechanism distinct from classical fat survival models and provides a reference for clinical practice. Full article

Anterior cruciate ligament (ACL) injuries pose significant challenges, driving the need for innovative repair strategies. Tissue engineering (TE) has emerged as a promising field for ACL injuries. Wet spinning is a filament production technique that enables precise control over filament alignment, diameter, and porosity, making it suitable for developing new scaffolds for ACL injuries. This study develops fibrous scaffolds using wet spinning of polycaprolactone (PCL) reinforced with cellulose nanocrystals (CNC) to enhance mechanical properties. Wet spinning was employed to fabricate fibrous scaffolds, utilizing PCL as the primary polymer due to its favorable biocompatibility and degradability. An automated collector was developed and optimized, which allowed the stretching of the PCL filaments to diameters as low as 30 µm. Several filaments were explored and characterized using SEM, TGA, and mechanical tests. The optimized PCL/CNC filaments were used to develop 3D braided structures that mimic ACL structure. The combination of wet-spun PCL/CNC filaments (with an optimized stirring method) and the braiding procedure allowed for fully biocompatible scaffolds that mimic both the structure and the mechanical properties of native ACL. Cytotoxicity and biocompatibility tests showed cell viability and proliferation values above 99% and 81%, respectively. These findings underscore the potential of CNC-reinforced PCL scaffolds as promising candidates for ACL repair, laying the groundwork for future biomedical applications. Full article

We compared the applicability of 3D fibrous scaffolds, produced by our patented centrifugal spinning technology, in soft tissue engineering. The scaffolds were prepared from four different biocompatible and biodegradable thermoplastics, namely, polylactide (PLA), polycaprolactone (PCL), poly(3-hydroxybutyrate) (PHB), and poly(1,4-butylene succinate) (PBS) and their blends. The combined results of SEM and BET analyses revealed an internal hierarchically organized porosity of the polymeric micro/nanofibers. Both nanoporosity and capillary effect are crucial for the water retention capacity of scaffolds designed for tissue engineering. The increased surface area provided by nanoporosity enhances water retention, while the capillary effect facilitates the movement of water and nutrients within the scaffolds. When the scaffolds were seeded with adipose-derived stem cells (ASCs), the ingrowth of these cells was the deepest in the PLA/PCL 13.5/4 (w/w) composite scaffolds. This result is consistent with the relatively large pore size in the fibrous networks, the high internal porosity, and the large specific surface area found in these scaffolds, which may therefore be best suited as a component of adipose tissue substitutes that could reduce postoperative tissue atrophy. Adipose tissue constructs produced in this way could be used in the future instead of conventional fat grafts, for example, in breast reconstruction following cancer ablation. Full article

Ligament tears can strongly influence an individual’s daily life and ability to engage in physical activities. It is essential to develop artificial scaffolds for ligament repairs in order to effectively restore damaged ligaments. In this experiment, the objective was to evaluate fibrous membranes as scaffolds for ligament repair. These membranes were created through electrospinning using piezoelectric polyvinylidene fluoride (PVDF) composites, which contained 1 wt.% and 3 wt.% of copper-impregnated nanohydroxyapatite (Cu-nHA). The proposed electrospun membrane would feature an aligned fiber structure achieved through high-speed roller stretching, which mimics the properties of biomimetic ligaments. Nanoparticles of Cu-nHA had been composited into PVDF to enhance the pirzoelectric β-phase of the PVDF crystallines. The study assessed the physicochemical properties, antibacterial activity, and biocompatibility of the membranes in vitro. A microstructure analysis revealed that the composite membrane exhibited a bionic structure with aligned fibers resembling human ligaments. The piezoelectric performance of the experimental group containing 3 wt.% Cu-nHA was significantly improved to 25.02 ± 0.68 V/g·m⁻² compared with that of the pure PVDF group at 18.98 ± 1.18 V/g·m⁻². Further enhancement in piezoelectric performance by 31.8% was achieved by manipulating the semicrystalline structures. Antibacterial and cytotoxicity tests showed that the composite membrane inherited the antibacterial properties of Cu-nHA nanoparticles without causing cytotoxic reactions. Tensile tests revealed that the membrane’s flexibility of strain was adequate for use as artificial scaffolds for ligaments. In particular, the mechanical properties of the two experimental groups containing Cu-nHA were significantly enhanced compared with those of the pure PVDF group. The favorable piezoelectric and flexible properties are highly beneficial for ligament tissue regeneration. This study successfully developed PVDF/Cu-nHA piezoelectric fibers for a biocompatible, unidirectional piezoelectric membrane with potential applications as ligament repair scaffolds. Full article

Fibrous by-products, including defective or double cocoons, are obtained during silk processing. These cocoons primarily contain fibroin and sericin (SS) proteins along with minor amounts of wax and mineral salts. In conventional textile processes, SS is removed in the production of smooth, lustrous silk threads, and is typically discarded. However, SS has garnered attention for its antioxidant, antibacterial, biocompatible, and anticancer properties as well as its excellent moisture absorption, making it a promising polymer for biomedical applications. Owing to its functional groups (carboxyl, amino, and hydroxyl), SS can blend and crosslink with other polymers, thereby improving the mechanical properties of sericin-based materials. This study explored the effects of different SS/polyvinyl alcohol (PVA) ratios on porous scaffolds fabricated via freeze-drying, focusing on the mechanical stability, water absorption, and protein release in phosphate-buffered saline (PBS). The scaffold morphology revealed reduced porosity with higher SS content, while increased PVA content led to material folding and layering. A greater PVA content enhanced water absorption, mechanical properties, and thermal stability, although SS release decreased. These results demonstrate that scaffold properties can be tailored by optimizing the SS/PVA ratio to suit specific biomedical applications. Full article

Scaffolds resembling the extracellular matrix (ECM) provide structural support for cells in the engineering of tissue constructs. Various material sources and fabrication techniques have been employed in scaffold production. Cellulose-based matrices are of interest due to their abundant supply, hydrophilicity, mechanical strength, and biological inertness. Terrestrial and marine plants offer diverse morphologies that can replicate the ECM of various tissues and be isolated through decellularization protocols. In this study, three marine macroalgae species—namely Durvillaea poha, Ulva lactuca, and Ecklonia radiata—were selected for their morphological variation. Low-intensity, chemical treatments were developed for each species to maintain native cellulose structures within the matrices while facilitating the clearance of DNA and pigment. Scaffolds generated from each seaweed species were non-toxic for human dermal fibroblasts but only the fibrous inner layer of those derived from E. radiata supported cell attachment and maturation over the seven days of culture. These findings demonstrate the potential of E. radiata-derived cellulose scaffolds for skin tissue engineering and highlight the influence of macroalgae ECM structures on decellularization efficiency, cellulose matrix properties, and scaffold utility. Full article

A primary challenge following severe musculoskeletal trauma is incomplete muscle regeneration. Current therapies often fail to heal damaged muscle due to dysregulated healing programs and insufficient revascularization early in the repair process. There is a limited understanding of the temporal changes that occur during the early stages of muscle remodeling in response to engineered therapies. Previous work demonstrated that nanotopographically patterned scaffolds provide cytoskeletal guidance and direct endothelial angiogenic and anti-inflammatory phenotypes. The aim of this study was to evaluate how endothelial cell (EC) patterning guides temporal and histomorphological muscle remodeling after muscle injury. In the current study, mice were treated with EC-laden engineered constructs that exhibited either aligned or random patterning of collagen nanofibrils, following a volumetric muscle loss injury (VML). Remodeling was evaluated at 2, 7, and 21 days post injury. Over the 21-day study, all groups (Acellular Aligned, EC Aligned, EC Random) demonstrated similar significant increases in vascular density and myogenesis. Animals treated with acellular controls demonstrated a two-fold decrease in muscle cross-sectional area between days 2 and 21 post injury, consistent with VML-induced muscle atrophy; however, animals treated with patterned EC-laden constructs exhibited preservation of muscle mass. The implantation of an EC-laden construct led to a 50% increase in the number of animals exhibiting areas of fibrous remodeling adjacent to the construct, along with greater collagen deposition (p < 0.01) compared to acellular controls 21 days post injury. These findings suggest that nanotopographically patterned EC-laden constructs may guide early muscle-protective programs that support muscle mass retention through myo-vascular independent pathways. Full article

This work presents the successful production of highly porous 3D nanofibrous hybrid scaffolds of polylactic acid (PLA)/polyethylene glycol (PEG) blends with the incorporation of calcium phosphate (CaP) bioceramics by a facile two-step process using the solution blow spinning (SBS) technique. CaP nanofibers were obtained at two calcium/phosphorus (Ca/P) ratios, 1.67 and 1.1, by SBS and calcination at 1000 °C. They were incorporated in PLA/PEG blends by SBS at 10 and 20 wt% to form 3D hybrid cotton-wool-like scaffolds. Morphological analysis showed that the fibrous scaffolds obtained had a randomly interconnected and highly porous structure. Also, the mean fiber diameter ranged from 408 ± 141 nm to 893 ± 496 nm. Apatite deposited considerably within 14 days in a simulated body fluid (SBF) test for hybrid scaffolds containing a mix of hydroxyapatite (HAp) and tri-calcium phosphate-β (β-TCP) phases. The scaffolds with 20 wt% CaP and a Ca/P ration of 1.1 showed better in vitro bioactivity to induce calcium mineralization for bone regeneration. Cellular tests evidenced that the developed scaffolds can support the osteogenic differentiation and proliferation of pre-osteoblastic MC3T3-E1 cells into mature osteoblasts. The results showed that the developed 3D scaffolds have potential applications for bone tissue engineering. Full article