Search Results (156)

Background: Digital technologies offer innovative opportunities for recovering and maintaining intellectual and mental health. The use of a multitask approach that combines motor component with various cognitive tasks in a virtual environment can optimize cognitive and physical functions and improve the quality of life of cardiac surgery patients. This study aimed to localize current sources of theta and alpha power in patients who have undergone virtual multitask training (VMT) and a control group in the early postoperative period of coronary artery bypass grafting (CABG). Methods: A total of 100 male CABG patients (mean age, 62.7 ± 7.62 years) were allocated to the VMT group (n = 50) or to the control group (n = 50). EEG was recorded in the eyes-closed resting state at baseline (2–3 days before CABG) and after VMT course or approximately 11–12 days after CABG (the control group). Power EEG analysis was conducted and frequency-domain standardized low-resolution tomography (sLORETA) was used to assess the effect of VMT on brain activity. Results: After VMT, patients demonstrated a significantly higher density of alpha-rhythm (7–9 Hz) current sources (t > −4.18; p < 0.026) in Brodmann area 30, parahippocampal, and limbic system structures compared to preoperative data. In contrast, the control group had a marked elevation in the density of theta-rhythm (3–5 Hz) current sources (t > −3.98; p < 0.017) in parieto-occipital areas in comparison to preoperative values. Conclusions: Virtual reality-based multitask training stimulated brain regions associated with spatial orientation and memory encoding. The findings of this study highlight the importance of neural mechanisms underlying the effectiveness of multitask interventions and will be useful for designing and conducting future studies involving VR multitask training. Full article

The possibility of collecting new archaeological elements useful in reconstructing the dynamics of population, production and commercial activities in the Bronze Age at the edge of the central-southern Venice Lagoon was provided between 2023 and 2024 thanks to an intervention of rescue archaeology planned during some water restoration works in the Giare–Mira area. Three small excavations revealed, approximately one meter below the current surface and covered by alluvial sediments, a rather complex palimpsest dated to the late Recent and the early Final Bronze Age. Three large circular pits containing exclusively purified grey/blue clay and very rare inclusions of vegetable fibres, and many large, fired clay vessels’ bases, walls and rims clustered in concentrated assemblages and random deposits point to potential on-site production. Two pyro-technological structures, one characterised by a sub-circular combustion chamber and a long inlet channel/praefurnium, and the second one with a sub-rectangular shape with arched niches along its southern side, complete the exceptional context here discovered. To analyse the relationship between the site and the natural sedimentary succession and to evaluate the possible extension of this site, three electrical resistivity tomography (ERT) and low-frequency electromagnetic (FDEM) measurements were collected. Several manual core drillings associated with remote sensing integrated the geophysical data in the analysis of the geomorphological evolution of this area, clearly related to different phases of fluvial activity, in a framework of continuous relative sea level rise. The typology and chronology of the archaeological structures and materials, currently undergoing further analyses, support the interpretation of the site as a late Recent/early Final Bronze Age productive site. Geophysical and geomorphological data provide information on the palaeoenvironmental setting, suggesting that the site was located on a fine-grained, stable alluvial plain at a distance of a few kilometres from the lagoon shore to the south-east and the course of the Brenta River to the north. The archaeological site was buried by fine-grained floodplain deposits attributed to the Brenta River. The good preservation of the archaeological structures buried by fluvial sediments suggests that the site was abandoned soon before sedimentation started. Full article

Urban expansion in coastal areas involves infrastructure development, industrial growth, and mining activities. These coastal environments face various environmental and geological hazards that require geo-engineers to devise solutions. An integrated geophysical approach aims to address such complex challenges as sea level rise, sea water intrusion, shoreline erosion, landslides and previous anthropogenic activity in coastal settings. In this study, the proposed methodology involves the systematic application of geophysical methods (FDEM, 3D GPR, 3D ERT, seismic), starting with a broad-scale survey and then proceeding to a localized exploration, in order to identify lithostratigraphy, bedrock depth, sea water intrusion and detect anthropogenic buried features. The critical aspect is to leverage the unique strengths and limitations of each method within the coastal environment, so as to derive valuable insights for survey design (extension and orientation of measurements) and data interpretation. The coastal zone of Throrikos valley, Attica, Greece, serves as the test site of our geophysical investigation methodology. The planning of the geophysical survey included three phases: The application of frequency-domain electromagnetic (FDEM) and 3D ground penetrating radar (GPR) methods followed by a 3D electrical resistivity tomography (ERT) survey and finally, using the seismic refraction tomography (SRT) and multichannel analysis of surface waves (MASW). The FDEM method confirmed the geomorphological study findings by revealing the paleo-coastline, superficial layers of coarse material deposits and sea water preferential flow due to the presence of anthropogenic buried features. Subsequently, the 3D GPR survey was able to offer greater detail in detecting the remains of an old marble pier inland and top layer relief of coarse material deposits. The 3D ERT measurements, deployed in a U-shaped grid, successfully identified the anthropogenic feature, mapped sea water intrusion, and revealed possible impermeable formation connected to the bedrock. ERT results cannot clearly discriminate between limestone or deposits, as sea water intrusion lowers resistivity values in both formations. Finally, SRT, in combination with MASW, clearly resolves this dilemma identifying the lithostratigraphy and bedrock top relief. The findings provide critical input for engineering decisions related to foundation planning, construction feasibility, and preservation of coastal infrastructure. The methodology supports risk-informed design and sustainable development in areas with both natural and cultural heritage sensitivity. The applied approach aims to provide a complete information package to the modern engineer when faced with specific challenges in coastal settings. Full article

As a significant geological hazard in large–scale engineering construction, deep subsurface voids demand effective and precise detection methods. Cross–hole radar tomography overcomes depth limitations by transmitting/receiving electromagnetic (EM) waves between boreholes, enabling the accurate determination of the spatial distribution and EM properties of subsurface cavities. However, conventional inversion approaches, such as travel–time/attenuation tomography and full–waveform inversion, still face challenges in terms of their stability, accuracy, and computational efficiency. To address these limitations, this study proposes a deep learning–based imaging method that introduces the concept of travel–time fingerprints, which compress raw radar data into structured, low–dimensional inputs that retain key spatial features. A large synthetic dataset of irregular subsurface cavity models is used to pre–train a UNET model, enabling it to learn nonlinear mapping, from fingerprints to velocity structures. To enhance real–world applicability, transfer learning (TL) is employed to fine–tune the model using a small amount of field data. The refined model is then tested on cross–hole radar datasets collected from a highway construction site in Guizhou Province, China. The results demonstrate that the method can accurately recover the shape, location, and extent of underground cavities, outperforming traditional tomography in terms of clarity and interpretability. This approach offers a high–precision, computationally efficient solution for subsurface void detection, with strong engineering applicability in complex geological environments. Full article

When discussing Cultural Heritage (CH), the risk of causing damage is inherently linked to the artifact itself due to several factors: age, perishable materials, manufacturing techniques, and, at times, inadequate preservation conditions or previous interventions. Thorough study and diagnostics are essential before any intervention, whether for preventive, routine maintenance or major restoration. Given the symbolic, socio-cultural, and economic value of CH artifacts, non-invasive (NI), non-destructive (ND), or As Low As Reasonably Achievable (ALARA) approaches—capable of delivering efficient and long-lasting results—are preferred whenever possible. Electromagnetic (EM) techniques are unrivaled in this context. Over the past 20 years, radiography, tomography, fluorescence, spectroscopy, and ionizing radiation have seen increasing and successful applications in CH monitoring and preservation. This has led to the frequent customization of standard instruments to meet specific diagnostic needs. Simultaneously, the integration of terahertz (THz) technology has emerged as a promising advancement, enhancing capabilities in artifact analysis. Furthermore, Artificial Intelligence (AI), particularly its subsets—Machine Learning (ML) and Deep Learning (DL)—is playing an increasingly vital role in data interpretation and in optimizing conservation strategies. This paper provides a comprehensive and practical review of the key achievements in the application of EM techniques to CH over the past two decades. It focuses on identifying established best practices, outlining emerging needs, and highlighting unresolved challenges, offering a forward-looking perspective for the future development and application of these technologies in preserving tangible cultural heritage for generations to come. Full article

Background: Image-guided navigation has revolutionized precision cardiac interventions, yet current technologies face critical limitations in real-time guidance and procedural accuracy. Method: Here, we comprehensively evaluate state-of-the-art imaging modalities, from conventional fluoroscopy to emerging hybrid systems, analyzing their applications across coronary, structural, and electrophysiological interventions. Results: We demonstrate that novel approaches combining optical coherence tomography with near-infrared spectroscopy or fluorescence achieve unprecedented plaque characterization and procedural guidance through simultaneous structural and molecular imaging. Our analysis reveals key challenges, including imaging artifacts and resolution constraints, while highlighting recent technological solutions incorporating artificial intelligence and robotics. We show that non-imaging alternatives, such as fiber optic real-shape sensing and electromagnetic tracking, complement traditional techniques by providing real-time navigation without radiation exposure. This paper also discusses the integration of image-guided navigation techniques into augmented reality systems and patient-specific modeling, highlighting initial clinical studies that demonstrate their significant promise in reducing procedural times and improving accuracy. These findings establish a framework for next-generation cardiac interventions, emphasizing the critical role of multimodal imaging platforms enhanced by AI-driven decision support. Conclusions: We conclude that continued innovation in hybrid imaging systems, coupled with advances in automation, will be essential for optimizing procedural outcomes and expanding access to complex cardiac interventions. Full article

As an efficient energy storage solution, lithium-ion batteries (LIBs) play a crucial role in the electric vehicle sector, driving innovation and development in the automotive industry. One common strategy to enhance energy density is to manufacture thicker electrodes. However, the pore distribution in thicker electrodes is often suboptimal, with elongated and tortuous pathways impeding charge transport. Optimizing the pore structure in electrodes is essential for fabricating high-performance batteries. In this study, we performed microwave sintering on lithium cobalt oxide materials and observed the three-dimensional evolution of pores during the sintering process using synchrotron radiation computed tomography (SR-CT).We discovered that pore evolution exhibits directional characteristics. Further analysis revealed that the electromagnetic loss of particles is related to the direction of the electric field, which is the reason for the directional behavior of pore evolution. This research could provide a new potential approach for the fabrication of advanced electrode materials by using electric field control during the battery manufacturing process to align pores vertically, thereby improving both the energy density and charge–discharge rate of the battery. Full article

Background/Objectives: Motivation is a key factor for improving motor function and cognitive control in patients. Motivation for rehabilitation is influenced by the relationship between the therapist and patient, wherein appropriate voice encouragement is necessary to increase motivation. Therefore, we examined the differences between mothers and other individuals, such as physical therapists (PTs), in their verbal interactions with children with cerebral palsy who have poor communication abilities, as well as the neurological and physiological effects of variations in the tone of their speech. Methods: The three participants were children with cerebral palsy (Participant A: boy, 3 years; Participant B: girl, 7 years; Participant C: girl, 9 years). Participants’ mothers and the assigned PTs were asked to speak under three conditions. During this, the brain activity of the participants was measured using a 19-channel electroencephalogram. The results were further analyzed using Independent Component Analysis frequency analysis with exact Low-Resolution Brain Electromagnetic Tomography, allowing for the identification and visualization of neural activity in three-dimensional brain functional networks. Results: The results of the ICA frequency analysis for each participant revealed distinct patterns of brain activity in response to verbal encouragement from the mother and PT, with differences observed across the theta, alpha, and beta frequency bands. Conclusions: Our study suggests that the children were attentive to their mothers’ inquiries and focused on their internal experiences. Furthermore, it was indicated that when addressed by the PT, the participants found it easier to grasp the meanings and intentions of the words. Full article

Background/Objectives: Precise stepping control is fundamental to human mobility, and impairments increase fall risk in older adults and individuals with neurological conditions. This study investigated the cortical networks underlying stepping accuracy using mobile brain/body imaging with electroencephalography (EEG)-based exact low-resolution electromagnetic tomography-independent component analysis (eLORETA-ICA) and microstate segmentation analysis (MSA). Methods: Sixteen healthy male participants performed a precision stepping task while wearing a mobile EEG system. Step performance was quantified using error distance, measuring deviation between target and heel contact points. Preprocessed EEG data were analyzed using eLORETA-ICA and MSA, with participants categorized into high- and low-performing groups. Results: Seven microstate clusters were identified, with the anterior cingulate cortex (ACC) showing the highest microstate probability (21.15%). The high-performing group exhibited amplified theta-band activity in the ACC, enhanced activity in the precuneus and postcentral gyrus, and suppressed mu- and beta-band activity in the paracentral lobules. Conclusions: Stepping accuracy relies on a distributed neural network, with the ACC playing a central role in performance monitoring. We propose an integrated framework comprising the following systems: error monitoring (ACC), sensorimotor integration (paracentral lobules), and visuospatial processing (precuneus and occipital regions). These findings highlight the importance of neural oscillatory mechanisms in precise motor control and offer insights for rehabilitation strategies and fall prevention programs. Full article

Slope failures caused by changes in soil moisture content have become a growing global concern, resulting in significant loss of life and economic damage. To ensure the stability of slopes, it is necessary to accurately monitor the moisture content and understand the complex interactions between soil, water, and slope behavior. This paper provides a comprehensive overview of advanced soil moisture detection techniques for unsaturated soil slopes, including point-scale measurements and geophysical methods. It first introduces the fundamental concepts of the soil–water characteristic curve (SWCC) and its influence on the shear strength and stability of unsaturated soil slopes. It then delves into the working principles and applications of various point-scale measurement techniques, such as time-domain reflectometry (TDR), frequency-domain reflectometry (FDR), and neutron probe methods. Additionally, this paper explores the use of geophysiDear Editor: The author has checked that the name and affiliation are accuratecal methods, including ground-penetrating radar (GPR), electrical resistivity tomography (ERT), and electromagnetic induction (EMI), for the non-invasive assessment of soil moisture conditions and slope stability monitoring. This review highlights the advantages of integrating multiple geophysical techniques, combined with traditional geotechnical and hydrological measurements, to obtain a more comprehensive understanding of the subsurface conditions and their influence on slope stability. Several case studies are presented to demonstrate the successful application of this integrated approach in various slope monitoring scenarios. The continued advancement in these areas will contribute to the development of more accurate, reliable, and widely adopted solutions for the assessment and management of slope stability risks. Full article

The ancient site of Olympia is located on the northern fringe of the Basin of Makrisia at the confluence of the Kladeos and Alpheios rivers (western Peloponnese, Greece) and was used as a venue for the Panhellenic Games from Archaic times until the 4th century AD. Geophysical prospection (frequency domain electromagnetic induction and electrical resistivity tomography) was carried out as a basis for detailed geoarchaeological investigations. In doing so, we identified a previously unknown building structure adjacent to the Altis, the inner part of the sanctuary at Olympia. Situated south of the Southwest Thermae, this structure measures at least 100 m (WSW-ENE) by 80 m (NNW-SSE). Its external orientation is in line with the orientation of the Southwest Thermae and the Leonidaion. We retrieved sediment cores from 17 different locations in combination with high-resolution direct push sensing from inside the newly found structure. All cores revealed distinct units of organic-rich limnic sediments dominated by clay and fine silt. Geochemical and micropaleontological analyses of selected sediment samples indicate highly eutrophic conditions, as evidenced by elevated phosphorous concentrations and the dominance of the ostracod species Cyprideis torosa, which is able to live under low-oxygen conditions. Moreover, molecular biomarker analyses show a significant input of lipid fecal markers, implying strong anthropogenic pollution. Further, the limnic sediments include numerous charcoal remains and abundant diagnostic artifacts such as ceramic fragments and building material. Radiocarbon dating documents that these limnic conditions persisted within the building structure from at least the 5th century BC to the 6th century AD. The identified building structure lies in the immediate proximity to the Lake of Olympia, which was recently found to have existed from the mid-Holocene to the Medieval period. Its characteristic filling with fine-grained sediments and multiple indications for a strongly polluted and heavily used standing water environment let us hypothesize that it was possibly used as a harbor installation. A harbor at ancient Olympia could have been used to reach the sanctuary by boat and to transport goods of all kinds. Full article

Background: Transcranial direct current stimulation (tDCS) is a non-invasive brain stimulation for treatment-resistant obsessive compulsive disorder (OCD). We aim to compare the treatment outcomes of a newly developed dual-site cathodal tDCS method over the orbitofrontal cortex (OFC) and pre-supplementary motor area (pre-SMA) and two previously reported montages (cerebellum-OFC and pre-SMA) in patients with treatment-resistant OCD. Methods: Eighteen OCD patients were randomly assigned to receive twice-daily 2 mA/20 min sessions for 10 consecutive weekdays, with the active cathode placed on the cerebellum-OFC, bilateral pre-SMA, or OFC-pre-SMA tDCS. The primary outcome was the change in the Yale–Brown Obsessive Compulsive Scale (Y-BOCS). The resting electroencephalogram (EEG) was recorded to obtain the default mode network (DMN) via low-resolution electromagnetic tomography. Each patient received one-week and one-month follow-ups after two weeks of stimulation. Results: At the end of the stimulation, the Y-BOCS scores in the cerebellum-OFC, pre-SMA, and OFC-pre-SMA tDCS groups (n = 6 in each group) were decreased by 14.15 ± 13.31, 7.4 ± 9.59, and 20.75 ± 8.70%, respectively, but no significant differences were found among the groups. In the OFC-pre-SMA tDCS group, OC symptoms significantly decreased by a mean of −20.75% immediately after the 20th tDCS session, and the improvement remained at 1 week and 1 month after tDCS. EEG source functional connectivity analyses revealed increased functional connectivity within the frontal network after OFC-pre-SMA tDCS, whereas decreased functional connectivity within the DMN was observed after cerebellum-OFC tDCS. Conclusions: Dual-site cathodal tDCS over the OFC and pre-SMA might be considered a potential montage to treat patients with treatment-resistant OCD. Future studies using randomized sham-controlled designs are needed. Full article

This paper presents, for the first time, a rotary actuator functionalized by an inclined disc rotor that serves as a distal optical scanner for endoscopic probes, enabling side-viewing endoscopy in luminal organs using different imaging/analytic modalities such as optical coherence tomography and Raman spectroscopy. This scanner uses a magnetic rotor designed to have a mirror surface on its backside, being electromagnetically driven to roll around the cone-shaped hollow base to create a motion just like a precessing coin. An optical probing beam directed from the probe’s optic fiber is passed through the hollow cone to be incident and bent on the back mirror of the rotating inclined rotor, circulating the probing beam around the scanner for full 360° sideway imaging. This new scanner architecture removes the need for a separate prism mirror and holding mechanics to drastically simplify the scanner design and thus, potentially enhancing device miniaturization and reliability. The first proof-of-concept is developed using 3D printing and experimentally analyzed to reveal the ability of both angular stepping at 45° and high-speed rotation up to 1500 rpm within the biologically safe temperature range, a key function for multimodal imaging. Preliminary optical testing demonstrates continuous circumferential scanning of the laser beam with no blind spot caused by power leads to the actuator. The results indicate the fundamental feasibility of the developed actuator as an endoscopic distal scanner, a significant step to further development toward advancing optical endoscope technology. Full article

Patients with mild cognitive impairment due to Alzheimer’s disease (ADMCI) typically show abnormally high delta (<4 Hz) and low alpha (8–12 Hz) rhythms measured from resting-state eyes-closed electroencephalographic (rsEEG) activity. Here, we hypothesized that the abnormalities in rsEEG activity may be greater in ADMCI patients than in those with MCI not due to AD (noADMCI). Furthermore, they may be associated with the diagnostic cerebrospinal fluid (CSF) amyloid–tau biomarkers in ADMCI patients. An international database provided clinical–demographic–rsEEG datasets for cognitively unimpaired older (Healthy; N = 45), ADMCI (N = 70), and noADMCI (N = 45) participants. The rsEEG rhythms spanned individual delta, theta, and alpha frequency bands. The eLORETA freeware estimated cortical rsEEG sources. Posterior rsEEG alpha source activities were reduced in the ADMCI group compared not only to the Healthy group but also to the noADMCI group (p < 0.001). Negative associations between the CSF phospho-tau and total tau levels and posterior rsEEG alpha source activities were observed in the ADMCI group (p < 0.001), whereas those with CSF amyloid beta 42 levels were marginal. These results suggest that neurophysiological brain neural oscillatory synchronization mechanisms regulating cortical arousal and vigilance through rsEEG alpha rhythms are mainly affected by brain tauopathy in ADMCI patients. Full article

Lung cancer is a major global health issue, with 2.21 million cases and 1.80 million deaths reported in 2020. It is the leading cause of cancer death worldwide. Most lung cancers have been linked to tobacco use, with changes in cigarette composition over the years contributing to shifts in cancer types and tumor locations within the lungs. Additionally, there is a growing incidence of lung cancer among never-smokers, particularly in East Asia, which is expected to increase the global burden of the disease. The classification of non-small cell lung cancer (NSCLC) into distinct subtypes is crucial for treatment efficacy and patient safety, especially as different subtypes respond differently to chemotherapy. For instance, certain chemotherapeutic agents are more effective for adenocarcinoma than for squamous carcinoma, which has led to the exclusion of squamous carcinoma from treatments like Bevacizumab due to safety concerns. This necessitates accurate histological diagnosis, which requires sufficient tissue samples from biopsies. However, acquiring adequate tissue is challenging due to the complex nature of lung tumors, patient comorbidities, and potential complications from biopsy procedures, such as bleeding, pneumothorax, and the purported risk of local recurrence. The need for improved diagnostic techniques has led to the development of advanced technologies like electromagnetic navigation bronchoscopy (ENB), radial endobronchial ultrasound (rEBUS), and robotic bronchoscopy. ENB and rEBUS have enhanced the accuracy and safety of lung biopsies, particularly for peripheral lesions, but both have limitations, such as the dependency on the presence of a bronchus sign. Robotic bronchoscopy, which builds on ENB, offers greater maneuverability and stability, improving diagnostic yields. Additionally, new imaging adjuncts, such as Cone Beam Computed Tomography (CBCT) and augmented fluoroscopy, further enhance the precision of these procedures by providing real-time, high-resolution imaging. These advancements are crucial as lung cancer is increasingly being detected at earlier stages due to screening programs, which require minimally invasive, accurate diagnostic methods to improve patient outcomes. This review aims to provide a comprehensive overview of the current challenges in lung cancer diagnostics and the innovative technological advancements in this rapidly evolving field, which represents an increasingly exciting career path for aspiring pulmonologists. Full article