Search Results (133)

The ongoing degradation of global forests has severely weakened ecosystem service functions, and traditional judicial remedies have struggled to quantify intangible ecological losses. China has become an important testing ground for restorative justice through the establishment of specialized environmental courts and the practice of environmental public interest litigation. Since 2015, China has actively explored and institutionalized the application of the concept of restorative justice in its environmental justice reform. This concept emphasizes compensating environmental damages through actual ecological restoration acts rather than relying solely on financial compensation. This shift reflects a deep understanding of the limitations of traditional environmental justice and an institutional response to China’s ecological civilization construction, providing critical support for forest ecosystem restoration and enabling ecological restoration activities, such as replanting and re-greening, habitat reconstruction, etc., to be enforced through judicial decisions. This study conducts a qualitative analysis of judicial rulings in forest restoration cases to systematically evaluate the effectiveness of restorative justice in compensating for losses in forest ecosystem service functions. The findings reveal the following: (1) restoration measures in judicial practice are disconnected from the types of ecosystem services available; (2) non-market values and long-term cumulative damages are systematically underestimated, with monitoring mechanisms exhibiting fragmented implementation and insufficient effectiveness; (3) management cycles are set in violation of ecological restoration principles, and acceptance standards lack function-oriented indicators; (4) participation of key stakeholders is severely lacking, and local knowledge and professional expertise have not been integrated. In response, this study proposes a restorative judicial framework oriented toward forest ecosystem services, utilizing four mechanisms: independent recognition of legal interests, function-matched restoration, application of scientific assessment tools, and multi-stakeholder collaboration. This framework aims to drive a paradigm shift from formal restoration to substantive functional recovery, providing theoretical support and practical pathways for environmental judicial reform and global forest governance. Full article

This study investigates the heavy metal contamination in urban and peri-urban soils of Thessaloniki, Greece, over a two-year period (2023–2024). A total of 208 composite soil samples were systematically collected from 52 sites representing diverse land uses, including high-traffic roadsides, industrial zones, residential neighborhoods, parks, and mixed-use areas, with sampling conducted both after the wet (winter) and dry (summer) seasons. Soil physicochemical properties (pH, electrical conductivity, texture, organic matter, and calcium carbonate content) were analyzed alongside the concentrations of heavy metals such as Cd, Co, Cr, Cu, Mn, Ni, Pb, and Zn. A pollution assessment employed the Geoaccumulation Index (I_geo), Contamination Factor (Cf), Pollution Load Index (PLI), and Potential Ecological Risk Index (RI), revealing variable contamination levels across the city, with certain hotspots exhibiting a considerable to very high ecological risk. Multivariate statistical analyses (PCA and HCA) identified distinct anthropogenic and geogenic sources of heavy metals. Health risk assessments, based on USEPA models, evaluated non-carcinogenic and carcinogenic risks for both adults and children via ingestion and dermal contact pathways. The results indicate that while most sites present low to moderate health risks, specific locations, particularly near major transport and industrial areas, pose elevated risks, especially for children. The findings underscore the need for targeted monitoring and remediation strategies to mitigate the ecological and human health risks associated with urban soil pollution in Thessaloniki. Full article

The dual environmental challenges of karst areas lie in organic solid waste’s (OSW) massive generation scale and diffuse dispersion, which accelerate bedrock exposure and soil contamination, while simultaneously representing an underutilized resource for soil amendments through optimized composting. Bio-enhanced composting of multi-source OSW yields compounds with dual redox/adsorption capabilities, effectively improving soil quality and restoring ecological balance. The recycling and circular utilization of OSW resources become particularly critical in karst regions with vulnerable soil ecosystems, where sustainable resource management is urgently needed to maintain ecological balance. This review elucidates the ecological impacts of multi-source OSW compost applications on soil environments in ecologically fragile karst regions, specifically elucidating the mechanisms of heavy metals (HMs) migration–transformation and organic contaminant degradation (with emphasis on emerging pollutants), and the functional role of microbial carbon pumps in these processes. Furthermore, establishing a sustainable “multi-source OSW−compost−organic matter (adsorption and redox sites)−microorganisms−pollution remediation” cycle creates a green, low-carbon microenvironment for long-term soil remediation. Finally, this study evaluates the application prospects of the refined composting technology utilizing multi-objective regulation for OSW resource recycling and utilization in karst areas. This review provides critical insights for optimizing soil remediation strategies in karst ecosystems through organic waste valorization. Full article

Organohalide-respiring bacteria (OHRB) facilitate the reductive dehalogenation of toxic halogenated compounds in the environment, which supports their growth and proliferation. Research conducted on OHRB has achieved notable advancements. However, given the intricacy of the ecosystem and the methodologies employed for microbial isolation, numerous constraints persist. Further exploration is imperative to elucidate the physiological characteristics, ecological functions, and technological applications of OHRB. This study aimed to evaluate the outcomes and insights of prior research via a bibliometric analysis of three obligate OHRB genera—Dehalococcoides, Dehalobacter, and Dehalogenimonas—over a three-decade period from 1994 to 2024, based on the Web of Science (WOS) database. The results show that research on these three bacterial genera has advanced in sequence since the initiation of studies in this field. The research area encompasses the identification and isolation of novel OHRB species, the gene sequencing of related enzymes, and the role of microorganisms in the remediation of environmental pollutants, reflecting a gradual transition from individual investigations of OHRB to the applications of microorganisms in remediating complex environmental pollution. This study systematically reviewed the past research history of this field and conducted an in-depth analysis of research hotspots. The integration of this analysis with technological development trends and practical application requirements provides a theoretical basis and innovative concepts for future research directions in the field of ecological environment restoration. Full article

The Arabian Gulf, bordered by major energy-producing nations, harbors diverse microalgal communities with strong potential for the bioremediation of environmental pollutants, particularly petroleum hydrocarbons. This review evaluates two key microalgal groups—micro-green algae and dinoflagellates—highlighting their distinct physiological traits and ecological roles in pollution mitigation. Dinoflagellates, including Prorocentrum and Protoperidinium, have demonstrated hydrocarbon-degrading abilities but are frequently linked to harmful algal blooms (HABs), marine toxins, and bioluminescence, posing ecological and health risks. The toxins produced by these algae can be hemolytic or neurotoxic and include compounds such as azaspiracids, brevetoxins, ciguatoxins, okadaic acid, saxitoxins, and yessotoxins. In contrast, micro-green algae such as Oedogonium and Pandorina are generally non-toxic, seldom associated with HABs, and typically found in clean freshwater and brackish environments. Some species, like Chlorogonium, indicate pollution tolerance, while Dunaliella has shown promise in remediating contaminated seawater. Both groups exhibit unique enzymatic pathways and metabolic mechanisms for degrading hydrocarbons and remediating heavy metals. Due to their respective phycoremediation capacities and environmental adaptability, these algae offer sustainable, nature-based solutions for pollution control in coastal, estuarine, and inland freshwater systems, particularly in mainland Qatar. This review compares their remediation efficacy, ecological impacts, and practical limitations to support the selection of effective algal candidates for eco-friendly strategies targeting petroleum-contaminated marine environments. Full article

Revegetation is considered a sustainable option for mine area remediation. However, the sustainability and risk evolution of revegetation for large antimony mine slag remain incompletely understood. In this study, we focused on the revegetation project of the waste slag heap of XKS, the world’s largest antimony mine. Systematically analyzed the physicochemical properties, total metal(loid) content, and BCR sequential extraction and applied the modified comprehensive pollution risk assessment (MCR) method to evaluate ecological risk evolution. The results showed that revegetation can effectively increase the nutrient content, and the total content of nitrogen and phosphorus maximally increased by 5.15 and 1.89 times, respectively, after 10 years of remediation. Long-term revegetation could mitigate the metal(loid) contamination, and the average contents of As and Sb decreased by 88.72–93.18% and 93.47–89.87%, respectively. BCR analysis showed that the percentage of residual As and residual Sb increased from 64.75% and 85.88% to 78.38% and 91.58%, respectively. The MCR assessment method showed that revegetation could effectively reduce the ecological risk level. This study provides important multidimensional evidence for the ecological restoration of antimony mining areas, which can provide practical guidance for subsequent slag management and risk control. Full article

Anthropogenic revegetation allows effective and timely soil development in mine restoration areas. The evaluation of soil quality is one of the most important criteria for measuring reclamation effectiveness, providing scientific reference for the subsequent management of ecological restoration projects. The aim of this research was to further investigate the influence of revegetation on mine-reclaimed soils in a semi-arid region. Thus, a coal-gangue dump within the afforestation chronosequence of 1 and 19 years in Shanxi Province, China, was selected as the study area. We assessed the physicochemical properties and nutrient stock of topsoils under four revegetation species, i.e., Pinus tabuliformis (PT), Medicago sativa (MS), Styphnolobium japonicum (SJ), and Robinia pseudoacacia ‘Idaho’ (RP). A two-way ANOVA revealed that reclamation age significantly affected SOC, TN, EC, moisture, and BD (p < 0.05), while the interaction effects of revegetation type and age were also significant for TN and moisture. In addition, SOC and TN stocks at 0–30 cm topsoil at the RP site performed the best among 19-year reclaimed sites, with an accumulation of 62.09 t ha⁻¹ and 4.23 t ha⁻¹, respectively. After one year of restoration, the MS site showed the highest level of SOC and TN accumulation, which increased by 186.8% and 88.5%, respectively, compared to bare soil in the 0–30 cm interval, but exhibited declining stocks during the 19-year restoration, possibly due to species invasion and water stress. In addition, an integrated soil quality index (ISQI) and the partial least squares structural equation model (PLS-SEM) were used to estimate comprehensive soil quality along with the interrelationship among influencing factors. The reclaimed sites with an ISQI value > 0 were 19-RP (3.906) and 19-SJ (0.165). In conclusion, the restoration effect of the PR site after 19 years of remediation was the most pronounced, with soil quality approaching that of the undisturbed site, especially in terms of soil carbon and nitrogen accumulation. These findings clearly revealed the soil dynamics after afforestation, further providing a scientific basis for choosing mining reclamation species in the semi-arid regions. Full article

To ensure the green, safe, and efficient extraction of mineral resources and promote sustainability, the stability of mined-out areas has become a critical factor affecting safe production and ecological restoration in underground metal mines. The instability of underground goafs poses a significant threat to mine safety, especially when irregular excavation patterns interact with high ground stress, exacerbating instability risks. Most existing studies lack a systematic and multidisciplinary integrated framework for comprehensive evaluation and management. This paper proposes a trinity research system of “assessment–optimization–governance”, integrating theoretical analysis, three-dimensional fluid–solid coupling numerical simulation, and a filling sequence optimization method based on genetic algorithms. An analysis of data measured from 243 pillars and 49 goafs indicates that approximately 20–30% of the pillars have a factor of safety (FoS) below 1.0, signaling immediate instability risks; additionally, 58% do not meet the threshold for long-term stability (FoS ≥ 1.5). Statistical and spatial analyses highlight that pillar width-to-height ratio (W/H) and cross-sectional area significantly influence stability; when W/H exceeds 1.5, FoS typically surpasses 2.0. Numerical simulations reveal pore water pressures of 1.4–1.8 MPa in deeper goafs, substantially reducing effective stress and accelerating plastic zone expansion. Stability classification categorizes the 49 goafs into 7 “poor”, 37 “moderate”, and 5 “good” zones. A genetic algorithm-optimized filling sequence prioritizes high-risk area remediation, reducing maximum principal stress by 60.96% and pore pressure by 28.6%. Cemented waste rock filling applied in high-risk areas, complemented by general waste rock filling in moderate-risk areas, significantly enhances overall stability. This integrated method provides a scientific foundation for stability assessment and dynamic remediation planning under complex hydrogeological conditions, offering a risk-informed and scenario-specific application of existing tools that improves engineering applicability. Full article

Toxicological studies of pesticides in animal models provide critical insights into their mechanisms of action, while adsorption strategies offer potential solutions for decontaminating polluted waters. We evaluated toxicity induced by tetraethyl pyrophosphate (TEPP), an organophosphate pesticide and AChE inhibitor, on zebrafish (Danio rerio) development and behavior, alongside the efficacy of wine cork granules as a natural adsorbent. TEPP exposure reduced embryo viability following an inverted U-shaped dose–response curve, suggesting non-monotonic neurodevelopmental effects, but did not alter developmental timing or morphology in survivors. In juveniles, TEPP increased preference for dark environments (33% vs. controls) and enhanced swimming endurance approximately 3-fold, indicating disrupted phototaxis and stress responses. Most strikingly, water treated with cork granules retained toxicity, increasing mortality, delaying embryogenesis, and altering behavior. This directly contradicts in vitro adsorption studies that suggested cork’s efficacy. These results demonstrate the high sensitivity of zebrafish to TEPP at nanomolar concentrations, which contrasts with in vitro models that require doses approximately 1000 times higher. Our findings not only highlight TEPP’s ecological risks but also reveal unexpected limitations of cork granules for environmental remediation, urging caution in their application. Full article

Chromium and arsenic, as prevalent heavy metal contaminants in water environments, pose significant threats to ecological systems and public health, necessitating urgent remediation measures. Conventional remediation techniques face challenges including high costs, prolonged remediation cycles, limited durability, and secondary contamination risks. While stabilization materials have emerged as promising solutions, the complex stabilization mechanisms for chromium and arsenic remain diverse and have not yet been fully elucidated. With reference to previous research, this paper systematically reviews inorganic stabilization materials for chromium and arsenic contamination remediation, with particular emphasis on elucidating their stabilization mechanisms and influencing factors. This review extensively evaluates various material types to inform practical applications, while highlighting investigations into novel composite materials, which advance technological innovation in water environmental remediation. It offers novel perspectives for addressing chromium and arsenic pollution challenges, potentially driving the development of more sustainable remediation strategies. Full article

This article provides a systematic review of the current research status and latest progress in the field of mine ecological restoration. Using the SCI literature indexed by the Web of Science database as the data source, the research status and hotspots in the field of mine ecological restoration are displayed through the visual analysis of CiteSpace and the progress of mine ecological restoration technology this year is systematically summarized. Through a comprehensive review of existing technological methods, it is found that whether it is physical, chemical, biological restoration, or combined restoration technology, there are respective advantages, disadvantages, and application limitations. Physical remediation is a pretreatment, chemical remediation is prone to secondary pollution, while the sustainability shown by bioremediation makes it dominant in the of mine ecological remediation, but it has a long cycle and there is a risk of heavy metals that are accumulated by plants re-entering the biosphere through the food chain. Combined remediation can integrate the advantages of different restoration technologies and is the trend for the future development of mine ecological restoration. In the future, we should further promote technological innovation, perfect monitoring and evaluation technology, and promote informatization, scientization, and the effective implementation of mine ecological restoration, to achieve the ecological restoration and sustainable development of the mine area. Full article

This study assesses the extent of heavy metals (HMs) contamination and the associated ecological risks in soils surrounding waste landfills at the former Boruta Dye Industry Plant in Zgierz, Poland. Soil samples were collected during two sampling campaigns (summer 2023 and winter 2024) from 13 locations. Concentrations of Cu, Ni, Zn, Pb, and Cd were measured, and contamination levels were evaluated using several indices: geoaccumulation index (I_geo), pollution index (PI), pollution load index (PLI), Nemerow integrated pollution index (NIPI), ecological risk factor for a single metal (E_rⁱ), index of potential ecological risk (ERI). The highest I_geo value (10.95) was recorded for Cu in the area of the old landfill, which had been in operation for 90 years. The average PI values were Cu—120.97, Pb—52.46, Cd—46.70, Zn—22.19, and Ni—5.38, indicating considerable (3 ≤ PI < 6) to high (PI ≥ 6) contamination levels. The NIPI values, in descending order, were Cu (2102.2) > Pb (270.7) > Zn (88.3) > Cd (62.8) > Ni (21.5), all reflecting high (NIPI >3) contamination levels. The highest PLI was 5.10, with all remaining values exceeding the contamination threshold (PLI >1). The E_rⁱ value for Cu reached 14,852.75, indicating an extremely high (E_rⁱ ≥ 320) ecological risk. The average ERI value across the study area was 1347.2, suggesting a severe (ERI ≥ 600) ecological threat. These findings confirm that the industrial landfills associated with the dye plant constitute a critical pollution hotspot. The results underscore the urgent need for ongoing environmental monitoring, risk mitigation, and site remediation to prevent further environmental degradation and potential contamination of nearby water bodies. Full article

Tyre wear particles (TWPs), generated from tyre-road abrasion, are a pervasive and under-regulated environmental pollutant, accounting for a significant share of global microplastic contamination. Recent estimates indicate that 1.3 million metric tons of TWPs are released annually in Europe, dispersing via atmospheric transport, stormwater runoff, and sedimentation to contaminate air, water, and soil. TWPs are composed of synthetic rubber polymers, reinforcing fillers, and chemical additives, including heavy metals such as zinc (Zn) and copper (Cu) and organic compounds like polycyclic aromatic hydrocarbons (PAHs) and N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine (6PPD). These constituents confer persistence and bioaccumulative potential. While TWP toxicity in aquatic systems is well-documented, its ecological impacts on terrestrial environments, particularly in agricultural soils, remain less understood despite global soil loading rates exceeding 6.1 million metric tons annually. This review synthesizes global research on TWP sources, environmental fate, and ecotoxicological effects, with a focus on soil–plant systems. TWPs have been shown to alter key soil properties, including a 25% reduction in porosity and a 20–35% decrease in organic matter decomposition, disrupt microbial communities (with a 40–60% reduction in nitrogen-fixing bacteria), and induce phytotoxicity through both physical blockage of roots and Zn-induced oxidative stress. Human exposure occurs through inhalation (estimated at 3200 particles per day in urban areas), ingestion, and dermal contact, with epidemiological evidence linking TWPs to increased risks of respiratory, cardiovascular, and developmental disorders. Emerging remediation strategies are critically evaluated across three tiers: (1) source reduction using advanced tyre materials (up to 40% wear reduction in laboratory tests); (2) environmental interception through bioengineered filtration systems (60–80% capture efficiency in pilot trials); and (3) contaminant degradation via novel bioremediation techniques (up to 85% removal in recent studies). Key research gaps remain, including the need for long-term field studies, standardized mitigation protocols, and integrated risk assessments. This review emphasizes the importance of interdisciplinary collaboration in addressing TWP pollution and offers guidance on sustainable solutions to protect ecosystems and public health through science-driven policy recommendations. Full article

Dredging is essential for the maintenance of ports, waterways, lakes, and lagoons to ensure their operability and economic value. Over the last few decades, scientists have focused on the significant environmental challenges associated with dredging, including habitat destruction, loss of biodiversity, sediment suspension, and contamination with heavy metals and organic pollutants. The huge loss of sediment in coastal areas and the associated erosion processes are now forcing stakeholders to look ahead and turn potential problems into an opportunity to develop new sediment management strategies, beyond environmental protection, toward ecosystem restoration and coastal resilience. Moreover, the European and Italian strategies, such as the European Green Deal (EGD) and the Italian Ecological Transition Plan (PTE), highlight the need to reuse dredge sediment in circular economy strategies, transforming them into valuable resources for construction, agriculture, and environmental restoration projects. European legislation on dredging is fundamental to the issue of management and priorities of dredged materials, but the implementation rules are deferred to individual member states. In Italy, the Ministerial Decree 173/2016 covers the main aspects of dredge activities and dredge sediment management. Moreover, it encourages the remediation and reuse of the dredge sediment. This study starts with a comprehensive analysis of the innovative remediation techniques that minimize impacts and promote sustainable, beneficial sediment management. Different remediation methods, such as electrochemical treatments, chemical stabilization, emerging nanotechnologies, bioremediation, and phytoremediation, will be evaluated for their effectiveness in reducing pollution. Finally, we highlight new perspectives, integrated strategies, and multidisciplinary approaches that combine various technological innovations, including artificial intelligence, to enhance sediment reuse with the aim of promoting economic growth and environmental protection. Full article

For energy management systems, it is crucial to determine, in advance, the available energy from renewable sources to be dispatched in the next hours or days, in order to meet their generation and consumption goals. Predicting the photovoltaic power output strongly depends on accurate weather forecasting data and properly photovoltaic panel models. In this context, several traditional thermal models are expected to become obsolete due to the removal of the widely used Nominal Module Operating Temperature parameter, stated in the IEC 61215-2:2021 standard, according to reports of longer time periods in test data processing. The main contribution of the photovoltaic power estimation algorithm developed in this paper is the integration of an accurate procedure to calculate the hourly day-ahead power output of a photovoltaic plant, based on three simplified thermal models in steady state. These models are proposed and evaluated as remedial alternatives to the removal of the Nominal Module Operating Temperature parameter—a subject that has not been widely addressed in the related literature. The proposed estimation algorithm converts specific Numerical Weather Prediction data and solar module specifications into photovoltaic power output, which can be used in energy management applications to provide economic and ecological benefits. This approach focuses on rooftop-mounted mono-crystalline silicon photovoltaic panel arrays and incorporates a nonlinear translation of Standard Test Conditions parameters to real operating conditions. All necessary input data are provided for the analysis, and the accuracy of experimental results is validated using appropriate error metrics. Full article