Search Results (9)

In this manuscript, we present in detail the design and implementation of the hardware and software to produce a standalone wireless sensor node, called SensorQ system, for the detection of a toxic chemical agent. The proposed wireless sensor node prototype is composed of a micro-controller unit (MCU), a radio frequency (RF) transceiver, a dual-band antenna, a rechargeable battery, a voltage regulator, and four integrated sensing devices, all of them integrated in a package with final dimensions and weight of 200 × 80 × 60 mm and 0.422 kg, respectively. The proposed SensorQ prototype operates using the Long-Range (LoRa) wireless communication protocol at 2.4 GHz, with a sensor head implemented on a hetero-core fiber optic structure supporting the surface plasmon resonance (SPR) phenomenon with a sensing section (L = 10 mm) coated with titanium/gold/titanium and a chemically sensitive material (zinc oxide) for the detection of Di-Methyl Methyl Phosphonate (DMMP) vapor in the air, a simulant of the toxic nerve agent Sarin. The transmitted spectra with respect to different concentrations of DMMP vapor in the air were recorded, and then the transmitted power for these concentrations was calculated at a wavelength of 750 nm. The experimental results indicate the feasibility of detecting DMMP vapor in air using the proposed optical sensor head, with DMMP concentrations in the air of 10, 150, and 150 ppm in this proof of concept. We expect that the sensor and wireless sensor node presented herein are promising candidates for integration into a wireless sensor network (WSN) for chemical warfare agent (CWA) detection and contaminated site monitoring without exposure of armed forces. Full article

It is both important and required to quickly and accurately detect chemical warfare agents, such as the highly toxic nerve agent sarin. Surface-enhanced Raman scattering (SERS) has received considerable attention due to its rapid results, high sensitivity, non-destructive data acquisition, and unique spectroscopic fingerprint. In this work, we successfully prepared SERS cotton swabs (CSs) for the detection of the sarin simulant agent dimethyl methyl phosphonate (DMMP) by anchoring N1-(3-trimethoxysilylpropyl) diethylenetriamine (ATS)/silver nanoparticle (AgNP) nanocomposites on CSs using ATS as the stabilizer and coupling agent. Simultaneously, the binding mode and reaction mechanics between the AgNP, ATS, and CS were confirmed by XPS. The modified CSs exhibited good uniformity, stability, and adsorption capability for SERS measurements, enabling the adsorption and detection of DMMP residue from an irregular surface via a simple swabbing process, with a detection limit of 1 g/L. The relative standard deviations (RSDs) of RSD₇₁₀ = 5.6% had high reproducibility. In this research, the fabrication method could easily be extended to other cellulose compounds, such as natural fibers and paper. Furthermore, the versatile SERS CSs can be used for the on-site detection of DMMP, particularly in civil and defense applications, to guarantee food security and the health of the population. Full article

Currently, polyurethane (PU) manufacturers seek green alternatives for sustainable production. In this work, sunflower oil is studied as a replacement and converted to a reactive form through epoxidation and oxirane opening to produce rigid PU foams. Confirmatory tests such as Fourier-transform infrared spectroscopy (FT-IR), gel permeation chromatography (GPC), and hydroxyl value among others were performed to characterize the synthesized polyol. Despite the versatility of rigid PU foams, they are highly flammable, which makes eco-friendly flame retardants (FRs) desired. Herein, expandable graphite (EG) and dimethyl methyl phosphonate (DMMP), both non-halogenated FR, were incorporated under different concentrations to prepare rigid PU foams. Their effects on the physio-mechanical and fire-quenching properties of the sunflower oil-based PU foams were elucidated. Thermogravimetric and compression analysis showed that these foams presented appreciable compressive strength along with good thermal stability. The closed-cell contents (CCC) were around 90% for the EG-containing foams and suffered a decrease at higher concentrations of DMMP to 72%. The burning test showed a decrease in the foam’s flammability as the neat foam had a burning time of 80 s whereas after the addition of 13.6 wt.% of EG and DMMP, separately, there was a decrease to 6 and 2 s, respectively. Hence, our research suggested that EG and DMMP could be a more viable alternative to halogen-based FR for PU foams. Additionally, the adoption of sunflower polyol yielded foams with results comparable to commercial ones. Full article

Bimetallic synergism plays an important role in lattice-doped catalysts. Therefore, lattice-doped bimetallic CuO/CeO₂ catalysts were prepared by secondary alkaline hydrothermal reaction. During this process, the CeO₂ nanomaterials were partially dissolved and recrystallized; thus, Cu ions were doped into the CeO₂ lattice. The physical and chemical properties of CeO₂, CuO/CeO₂, and CuO were investigated. H₂ temperature-programmed reduction characterization showed that the oxidation activity of CuO/CeO₂ was significantly improved. X-ray photoelectron spectroscopy results showed that electron transfer occurred between Ce and Cu in the CuO/CeO₂ catalyst. Additionally, Raman characterization confirmed the strong interaction between Cu and Ce. After CuO was loaded, the thermal catalytic decomposition performance of the catalyst was significantly improved with respect to the sarin simulant dimethyl methyl phosphonate (DMMP); with an increase in the Cu/Ce ratio, the performance first strengthened and then weakened. Additionally, the reaction tail gas and catalyst surface products were analyzed using mass spectrometry and ion chromatography, and the changes in the surface products during the thermal catalytic decomposition of DMMP were characterized at different temperatures using in situ diffuse reflectance infrared Fourier transform spectroscopy. Finally, the catalytic reaction pathways of DMMP on CeO₂, CuO/CeO₂, and CuO were inferred. The study results not only demonstrate an effective catalyst for the removal of nerve agent but also a feasible preparation method for lattice-doped bimetallic catalysts in the field of environmental protection. Full article

Chemical warfare agents (CWAs) have been threatening human civilization and its existence because of their rapid response, toxic, and irreversible nature. The hybrid nanostructured composites were synthesized by the hydrothermal process to detect the dimethyl methyl phosphonate (DMMP), a simulant of G-series nerve agents, especially sarin. Cellulose (CE), manganese oxide cellulose (MnO₂@CE), and MnO₂@CE/polypyrrole (PPy) exhibited a frequency shift of 0.4, 4.8, and 8.9 Hz, respectively, for a DMMP concentration of 25 ppm in the quartz crystal microbalance (QCM). In surface acoustic wave (SAW) sensor, they exhibited 187 Hz, 276 Hz, and 78 Hz, respectively. A comparison between CE, MnO₂@CE, and MnO₂@CE/PPy demonstrated that MnO₂@CE/PPy possesses excellent linearity with a coefficient of determination (COD or R²) of 0.992 and 0.9547 in the QCM and SAW sensor. The hybrid composite materials showed a reversible adsorption and desorption phenomenon in the reproducibility test. The response and recovery times indicated that MnO₂@CE/PPy showed the shortest response (~23 s) and recovery times (~42 s) in the case of the QCM sensor. Hence, the pristine CE and its nanostructured composites were compared to analyze the sensing performance based on sensitivity, selectivity, linearity, reproducibility, and response and recovery times to detect the simulant of nerve agents. Full article

Chemical warfare agents (CWAs) are highly toxic and fast-acting and are easy to cause large-scale poisoning to humans and livestock after being released. The activated carbon used for CWAs adsorption has disadvantages of limited adsorption capacity, easy aging and deactivation. Metal oxides have environmental stability, and they are characterized by long lasting and broad spectrum when used for thermal catalytic decomposition. Therefore, in this study, the supported copper–cerium catalyst CuO-CeO₂/γ-Al₂O₃ was prepared using an equal volume impregnation method. The thermal catalytic decomposition performance was studied using sarin CWAs simulant dimethyl methyl phosphonate (DMMP) as the target compound. The results show that the CuO-CeO₂/γ-Al₂O₃ catalyst with a CeO₂ loading of 5% exhibited better thermal catalytic decomposition performance of DMMP. The catalyst provided protection against DMMP for 237 min at 350 °C; CuO was highly dispersed on CuO-5% CeO₂/γ-Al₂O₃, and there was a strong interaction between Cu and Ce on CuO-5% CeO₂/γ-Al₂O₃, which promoted the generation of surface-adsorbed oxygen, leading to a better thermal catalytic decomposition performance of DMMP. This study is expected to provide a reference for the study of catalysts for the thermal catalytic decomposition of CWAs. Full article

Chemical warfare agents (CWAs) have inflicted monumental damage to human lives from World War I to modern warfare in the form of armed conflict, terrorist attacks, and civil wars. Is it possible to detect the CWAs early and prevent the loss of human lives? To answer this research question, we synthesized hybrid composite materials to sense CWAs using hydrothermal and thermal reduction processes. The synthesized hybrid composite materials were evaluated with quartz crystal microbalance (QCM) and surface acoustic wave (SAW) sensors as detectors. The main findings from this study are: (1) For a low dimethyl methyl phosphonate (DMMP) concentration of 25 ppm, manganese dioxide nitrogen-doped graphene oxide (NGO@MnO₂) and NGO@MnO₂/Polypyrrole (PPy) showed the sensitivities of 7 and 51 Hz for the QCM sensor and 146 and 98 Hz for the SAW sensor. (2) NGO@MnO₂ and NGO@MnO₂/PPy showed sensitivities of more than 50-fold in the QCM sensor and 100-fold in the SAW sensor between DMMP and potential interferences. (3) NGO@MnO₂ and NGO@MnO₂/PPy showed coefficients of determination (R²) of 0.992 and 0.975 for the QCM sensor and 0.979 and 0.989 for the SAW sensor. (4) NGO@MnO₂ and NGO@MnO₂/PPy showed repeatability of 7.00 ± 0.55 and 47.29 ± 2.69 Hz in the QCM sensor and 656.37 ± 73.96 and 665.83 ± 77.50 Hz in the SAW sensor. Based on these unique findings, we propose NGO@MnO₂ and NGO@MnO₂/PPy as potential candidate materials that could be used to detect CWAs. Full article

A novel bio-based polyol was synthesized using corn oil and 2-mercaptoethanol via thiol-ene reaction as an alternative to petroleum-based polyol for the synthesis of polyurethane foams. The polyol was analyzed using wet chemical techniques to obtain hydroxyl number and viscosity. Infrared spectroscopy and gel permeation chromatography were used to confirm the structural properties of the foams. Flame-retardant polyurethane foams were prepared by the addition of different concentrations of dimethyl methyl phosphonate (DMMP) in final foam composition. The effect of DMMP on the thermo-mechanical properties of the polyurethane foams was analyzed. The TGA analysis showed improved stability of the final char with addition of DMMP in the foams. All the foams maintained a well-defined cellular structure and over 95% of closed cell content. The horizontal burning test showed reduced burning time and weight loss from 115 s and 38 wt.% for the neat foams, to 3.5 s and 5.5 wt.% for DMMP-containing foams (1.94 wt.% P). The combustion test using cone calorimeter showed a considerable reduction in heat release rate and total heat release. Thus, our study shows that corn-oil based polyol can be used to produce renewable polyol for industrially producible rigid polyurethane foams. The addition of a small amount of DMMP could result in a significant reduction in the flame-retardant properties of the polyurethane foams. Full article

A flame retardant rigid polyurethane foam (RPUF) system containing functionalized graphene oxide (fGO), expandable graphite (EG), and dimethyl methyl phosphonate (DMMP) was prepared and investigated. The results show that the limiting oxygen index (LOI) of the flame-retardant-polyurethane-fGO (FRPU/fGO) composites reached 28.1% and UL-94 V-0 rating by adding only 0.25 g fGO. The thermal degradation of FRPU samples was studied using thermogravimetric analysis (TG) and the Fourier transform infrared (FT-IR) analysis. The activation energies (E_a) for the main stage of thermal degradation were obtained using the Kissinger equation. It was found that the fGO can considerably increase the thermal stability and decrease the flammability of RPUF. Additionally, the E_a of FRPU/fGO reached 191 kJ·mol⁻¹, which was 61 kJ·mol⁻¹ higher than that of the pure RPUF (130 kJ·mol⁻¹). Moreover, scanning electron microscopy (SEM) results showed that fGO strengthened the compactness and the strength of the “vermicular” intumescent char layer improved the insulation capability of the char layer to gas and heat. Full article