Search Results (787)

Background: Positive identification is at the forefront of tasks for forensic practitioners when a set of remains is discovered. Standard means of identification include fingerprints, dental, and DNA analyses; however, additional methods are utilized by forensic practitioners to identify remains when these primary methods of identification are not applicable. Comparative radiography has become a frequently employed approach for positive identification, specifically focused on individualizing characteristics evident in human skeletal variation. Regions that display wide ranges of morphological variation within the human skeleton include the cranium as well as the thorax. With regard to the cranium specifically, paranasal sinuses have been recognized as unique features and are valuable for identification purposes. Objectives: This paper explores the basic information of the anatomy and development, range of variation, and the importance of paranasal sinuses in forensic contexts. Results: This article discusses how practitioners can best use the morphological information contained in the paranasal sinuses and how to compare the antemortem and postmortem datasets involving different imaging modalities for positive identification purposes, in order to provide practical concepts that may assist in cases where paranasal sinuses may be used for forensic human identification. Conclusions: Understanding the development of paranasal sinuses, the imaging techniques applied for their visualization, as well as the principles of identification, is key to conducting proper antemortem vs. postmortem comparisons and effectively utilizing paranasal sinuses in forensic identification contexts. Full article

Background/Objectives: The diagnosis of pediatric dental conditions from panoramic radiographs is uniquely challenging due to the dynamic nature of the mixed dentition phase, which can lead to subjective and inconsistent interpretations. This study aims to develop and rigorously validate an advanced deep learning model to enhance diagnostic accuracy and efficiency in pediatric dentistry, providing an objective tool to support clinical decision-making. Methods: An initial comparative study of four state-of-the-art YOLO variants (YOLOv8, v9, v10, and v11) was conducted to identify the optimal architecture for detecting four common findings: Dental Caries, Deciduous Tooth, Root Canal Treatment, and Pulpotomy. A stringent two-tiered validation strategy was employed: a primary public dataset (n = 644 images) was used for training and model selection, while a completely independent external dataset (n = 150 images) was used for final testing. All annotations were validated by a dual-expert team comprising a board-certified pediatric dentist and an experienced oral and maxillofacial radiologist. Results: Based on its leading performance on the internal validation set, YOLOv11x was selected as the optimal model, achieving a mean Average Precision (mAP50) of 0.91. When evaluated on the independent external test set, the model demonstrated robust generalization, achieving an overall F1-Score of 0.81 and a mAP50 of 0.82. It yielded clinically valuable recall rates for therapeutic interventions (Root Canal Treatment: 88%; Pulpotomy: 86%) and other conditions (Deciduous Tooth: 84%; Dental Caries: 79%). Conclusions: Validated through a rigorous dual-dataset and dual-expert process, the YOLOv11x model demonstrates its potential as an accurate and reliable tool for automated detection in pediatric panoramic radiographs. This work suggests that such AI-driven systems can serve as valuable assistive tools for clinicians by supporting diagnostic workflows and contributing to the consistent detection of common dental findings in pediatric patients. Full article

Background/Objectives: Dental practitioners widely use dental implants to treat traumatic cases. Titanium implants are currently the most popular choice among dental practitioners and surgeons. The discovery of newer polymeric materials is also influencing the interest of dental professionals in alternative options. A comparative study between existing titanium implants and newer polymeric materials can enhance professionals’ ability to select the most suitable implant for a patient’s treatment. This study aimed to investigate material property advantages of high-performance thermoplastic biopolymers such as PEEK and PEKK, as compared to the time-tested titanium implants, and to find the most suitable and economically fit implant material. Methods: Three distinct implant material properties were assigned—PEEK, PEKK, and commercially pure titanium (CP Ti-55)—to dental implants measuring 5.5 mm by 9 mm, along with two distinct titanium (TI6AL4V) abutments. Twelve three-dimensional (3D) models of bone blocks, representing the mandibular right molar area with Osseo-integrated implants were created. The implant, abutment, and screw were assumed to be linear; elastic, isotropic, and orthotropic properties were attributed to the cancellous and cortical bone. Twelve model sets underwent a three-dimensional finite element analysis to evaluate von Mises stress and total deformation under 250 N vertical and oblique (30 degree) loads on the top surface of each abutment. Results: The study revealed that the time-tested titanium implant outperforms PEEK and PEKK in terms of marginal bone preservation, while PEEK outperforms PEKK. Conclusions: This study will assist dental practitioners in selecting implants from a variety of available materials and will aid researchers in their future research. Full article

Background: Midfacial fractures are common outcomes of facial trauma. While younger individuals typically sustain these injuries through high-energy events like assaults and traffic or sports accidents, elderly patients increasingly present with fractures from low-energy mechanisms, primarily falls. Purpose: The aim of this study was to analyze age- and gender-specific patterns in midfacial fractures over a 10-year period, with emphasis on elderly individuals and low-energy trauma. Methods: A retrospective review was performed of proven midfacial fractures between 2013 and 2022 at the Department of Oral and Maxillofacial Surgery (University of Pécs, Hungary). The patients were stratified by age (<65 vs. ≥65 years) and gender. The variables included the injury mechanism, fracture localization, the dental status, hospitalization, and the presence of associated injuries. Bivariate analyses were performed, and the significance level was set to p < 0.05. Results: A total of 957 radiologically confirmed midfacial fracture cases were evaluated, of whom 344 (35.9%) were ≥65 years old. In the elderly group, females had a 19-fold higher risk for midfacial trauma than younger females (OR: 19.1, 95%CI: 9.30–39.21). In the older group, a fall was significantly the most frequent injury mechanism (OR: 14.5; 95%CI: 9.9–21.3), responsible for 89.5% of the cases, while hospitalization (OR: 0.36; 95%CI: 0.23–0.56) was less characteristic. Most of the fractures occurred in the zygomatic bone, in the zygomaticomaxillary complex, or in the anterior wall of the maxilla. Associated injuries in the elderly group included mostly lower limb injuries—particularly pertrochanteric femoral fractures in females—and upper limb injuries, with a slight male dominance. Conclusions: Low-energy falls are the primary cause of midfacial fractures in elderly patients, particularly in women. Tailored prevention and management strategies are essential for improving the outcomes in this growing demographic group. Full article

Background/Objectives: The aim of this study was to evaluate the level of awareness among dental students and practitioners regarding the utilization of endocrowns in clinical settings, along with any differences in knowledge based on gender, educational level, and workplace. Methods: A cross-sectional online survey-based study was conducted, including 1154 participants from various dental institutions across Saudi Arabia. The questionnaire included demographic data and closed-ended questions focused on knowledge and awareness of endocrowns. Data was analyzed using statistical tests, including chi-square, to see any significant differences. Results: Most participants (81%) had knowledge about endocrowns, mainly from their colleagues. Knowledge levels and preferences (like the use of lithium disilicate and adhesive resin cement) differed based on gender, educational level, and workplace. Male participants and undergraduates showed better awareness in some areas. Faculty members mostly depend on college training, while private practitioners obtain most of their information from workshops. Conclusions: Males showed significant superiority in knowledge about endocrown usage. Colleges were the most prevalent source of information regarding endocrown restorations. Significant molar tooth loss and restricted inter-arch space were the most common reasons for utilizing endocrowns. Moreover, endocrowns were considered a viable alternative to traditional post and core. Full article

Background and Objectives: Dental restorations can be composed of various materials, including amalgams and methacrylate-based resins. The health risks associated with the components of the restorative materials have always been a concern, even more so with the ageing of the restorations. As the micronucleus (MN) test is a standard, accessible, and minimally invasive technique for studying the genotoxic effect of clastogenic chemicals on oral mucosal cells, the current study was conducted to determine the frequency and morphological properties of MN in the exfoliated oral mucosal cells. Materials and Methods: A total of 115 aged composite and amalgam restorations were included in this study. Epithelial cells were collected from the gingival tissue adjacent to the restorations of each patient and stained with a hematoxylin–eosin (HE) stain. After evaluation of the slides, the results were subjected to statistical analysis using Chi-square tests. The level of significance was set at 0.05. Results: The mean number of MN was significantly lower for composite restorations compared to amalgam restorations. There were no statistically significant differences between composite restorations aged 1–5 years, 5–10 years, over 10 years, and amalgam restorations aged over 10 years in the location (p = 0.11), staining (p = 0.11), or morphological characteristics (p = 0.18) of the MN. Conclusions: Despite the main limitation of this study, the lack of a control group, our results suggest that long-term exposure to restorative fillings and the ageing of these materials can cause DNA damage locally in the adjacent sites of oral cavity. Full article

(1) Aim: To compare transverse dimensions measured on AI-generated intra-oral models and conventional digital intra-oral models. (2) Methods: A group of 38 patients treated with clear aligners was selected retrospectively from those whose records featured both AI-generated and conventional digital intra-oral models taken at the same timepoint. Transverse dimensions (inter-canine, inter-premolar, and inter-molar distances) on both upper and lower arches were evaluated and compared. Intra-class correlation index and paired t-test were applied to test the repeatability of measurements and statistically significant differences, respectively. Statistical significance was set at 0.05. (3) Results: Intra-class correlation index showed good repeatability. Paired t-test showed differences in measurements of the distances between the thicket area of gingiva on the palatal side of the upper first molar (p = 0.002), the gingival margin of the lower first molar (p = 0.014), and the mesio-vestibular cusps of the lower first molars (p = 0.019). (4) Conclusions: Transverse measurements were similar on AI-generated and conventional intra-oral .stl renderings. Statistical differences were found on posterior areas of both upper and lower dental arches, but are unlikely to be clinically significant. Full article

Additive manufacturing (AM) has emerged as a transformative technology in dentistry, enabling the production of patient-specific dental applications with reduced costs and fabrication times. Despite the growth of applications, a consolidated understanding of current 3D printing technologies, materials, and performance in dental settings remains fragmented. Here, we perform a Systematic Literature Review (SLR) using the PRISMA protocol, retrieving 19 closely related primary studies. The evidence is synthesized across three axes: application domain, AM technology, and critical quality parameters. Dental restorations, prosthetics, crowns, and implants are the most common applications, while fused deposition modeling, stereolithography, digital light processing, selective laser sintering, and laser-directed energy deposition are the most used technologies. AM materials include polymers, metals, and emerging biomaterials. Key quality determinants include dimensional accuracy, wear and corrosion resistance, and photosensitivity. Notably, biocompatibility and cytotoxicity remain underexplored yet critical factors for ensuring long-term clinical safety. The evidence also suggests a lack of in vivo studies, insufficient tribological and microbiological testing, including limited data degradation pathways of AM materials under oral conditions. Understanding that there are disconnects between the realization of the clinical and the economic benefits of 3D printing in dentistry, future research requires standardized testing frameworks and long-term biocompatibility validation. Full article

(1) Background: Human Papillomavirus (HPV)-associated oropharyngeal cancer is the fastest-growing head and neck malignancy, yet vaccination coverage remains suboptimal. (2) Methods: In this cross-sectional survey conducted from April 2022 to April 2023, 400 parents of patients aged 8–18 years (mean ± SD = 12.8 ± 2.6; 59.3% female) reported their child’s HPV vaccination status and willingness to initiate or complete the vaccine series at a dental clinic. For those who were not fully vaccinated, reasons for refusal were documented. (3) Results: Over half (54.5%, n = 218) of the children were not fully vaccinated. Notably, 21% (46/218) of parents indicated an immediate willingness to vaccinate their child if the dentist offered it—a significant potential for improvement compared to general healthcare settings. Reported barriers included preference for a physician’s office (43.6%), indecision (20.3%), unspecified concerns (14.5%), safety worries (8.1%), and religious objections (5.2%). Male and younger patients (9–11 years) showed significantly lower vaccination coverage (p < 0.05). (4) Conclusions: Dentists can substantially impact public health by integrating immunization counseling, interprofessional collaboration, and vaccine administration, thereby addressing critical gaps in HPV-related cancer prevention. These findings highlight the opportunity for dental offices to enhance vaccination rates and prompt further research, education, and policy initiatives to advance the oral and general health of our patients. Full article

Objectives: The aim of this study was to determine the differential temperature produced on ceramic implants using laser irradiation on a pulsed setting of intrabony defects in vitro. Methods: A ceramic (Zr) dental implant (Zeramex, 4.8 × 12 mm) was placed into a bovine bone block. A three-wall intrabony defect (6 × 4 × 3 mm) was created to mimic an osseous peri-implant defect. Thermocouples were placed on the apical and coronal areas to measure temperature changes (∆T) during 60 s of laser irradiation. The bovine block was heated to 37 °C, and the defect walls were irradiated with the CO₂ and Er,Cr:YSGG laser. The settings used were pulsed mode for both lasers, with 30 Hz and 1.5 W for the Er,Cr:YSGG laser and 70 Hz and 2 W for the CO₂ laser. The same laser settings were repeated at room temperature (RT, 23 °C). Twenty trials were performed for each experimental group at room and body temperature for assessment of ∆T. Paired t-test were used to compare the measurements between 37 °C and 23 °C for the Er,Cr:YSGG, and CO₂ laser, respectively. Results: The CO₂ laser resulted in the highest ∆T (°C) at the coronal (15.22 ± 0.28/8.82 ± 0.21) and apical (5.84 ± 0.14/2.30 ± 0.28) level when this laser was used in both room temperature and body temperature, respectively. The highest ∆T (°C) for the Er,Cr:YSGG laser at body temperature at the coronal thermocouple was 7.64 ± 0.55, while for the CO₂ laser, at body temperature was 8.82 ± 0.21. Conclusion: Within the limitations of our study, the use of CO₂ laser and Er,Cr:YSGG laser on peri-implant defects generally appears to be safe in treating peri-implant defects around zirconia implants in vitro. Full article

Two-component dental materials are commonly used by the dentist for various applications (cementation of indirect restorations, filling of a cavity without layering, etc.). These materials are cured by redox polymerization. The (hydro)peroxide/thiourea/copper salt redox initiator system is well established and can be found in a wide range of commercially available dental materials. The thiourea is a key component of the initiator system. This study explores the influence of the nature of the thiourea reducing agent on the reactivity and efficiency of redox initiator systems. In this work, six different thiourea structures were investigated, in combination with copper(II) acetylacetonate and cumene hydroperoxide (CHP), to understand their impact on polymerization kinetics and mechanical properties of methacrylate-based materials. Various experimental techniques, including mass spectrometry (MS) and spectroscopic analyses, were employed to elucidate the underlying mechanisms governing these redox systems. The results highlight that thiourea plays a dual role, acting both as a reducing agent and as a ligand in copper complexes, affecting radical generation and polymerization efficiency. Structural modifications of thiourea significantly influence the initiation process, demonstrating that reactivity is governed by a combination of factors rather than a single property. Self-cure dental flowable composites exhibiting excellent flexural strength (>100 MPa) and modulus (>6000 MPa) were obtained using hexanoyl thiourea, N-benzoylthiourea, or 1-(pyridin-2-yl)thiourea as a reducing agent. The adjustment of the Cu(acac)₂ enables to properly set the working time in the range of 100 to 200 s. These findings provide valuable insights into the design of the next generation of redox initiating systems for mild and safe polymerization conditions. Full article

The acoustic environment of dental clinics plays a critical role in shaping patient experience, staff performance, and overall clinical effectiveness. This comprehensive review, supported by systematic search procedures, investigates how soundscapes in dental settings influence psychological, physiological, and operational outcomes. A total of 60 peer-reviewed studies were analyzed across dental, healthcare, architectural, and environmental psychology disciplines. Findings indicate that mechanical noise from dental instruments, ambient reverberation, and inadequate acoustic zoning contribute significantly to patient anxiety and professional fatigue. The review identifies emerging strategies for acoustic optimization, including biophilic and sustainable design principles, sound-masking systems, and adaptive sound environments informed by artificial intelligence. Special attention is given to the integration of lean management and circular economy practices for sustainable dental architecture. A design checklist and practical framework are proposed for use by dental professionals, architects, and healthcare planners. Although limited by the predominance of observational studies and geographic bias in the existing literature, this review offers a comprehensive, interdisciplinary synthesis. It highlights the need for future clinical trials, real-time acoustic assessments, and participatory co-design methods to enhance acoustic quality in dental settings. Overall, the study positions sound design as a foundational element in creating patient-centered, ecologically responsible dental environments. Full article

Objectives: To evaluate the psychometric properties of the Spanish version of the obstructive sleep apnea knowledge and attitudes (OSAKA) questionnaire among dental professionals in Colombia. Methods: A cross-sectional study was conducted in Manizales, Colombia, between January and June 2024. A total of 120 dental professionals, including general dentists, specialists, residents, and academic clinicians, were selected through stratified random sampling. Participants completed the Spanish-adapted OSAKA questionnaire and a structured sociodemographic survey. Internal consistency was assessed using Cronbach’s alpha (α) and McDonald’s Omega (Ω). Construct validity was examined through exploratory factor analysis (EFA), with Kaiser Meyer Olkin (KMO) values and Bartlett’s test. Results: The knowledge subscale (18 items) showed good reliability (α = 0.83; Ω = 0.83), while the attitude subscale (5 items) showed near-acceptable reliability (α = 0.68; Ω = 0.59). KMO values were 0.79 for knowledge and 0.57 for attitudes; Bartlett’s test was significant in both cases (p ≤ 0.001). EFA supported structural validity: six components with eigenvalues >1 explained 61.66% of the variance for knowledge, and two components explained 79.49% for attitudes. Significant differences in attitude scores were found among professional groups (p ≤ 0.001, η² = 0.13), with specialists scoring highest ($\overline{X}$ = 17.66) and general dentists lowest ($\overline{X}$ = 14.62). Knowledge scores did not significantly differ between groups (p = 0.47). Conclusions: The Spanish OSAKA questionnaire is a valid and reliable tool to assess knowledge and attitudes toward obstructive sleep apnea in Colombian dental professionals. Its use may support improved education, screening, and interdisciplinary collaboration in dental settings. Full article

Background: Dynamic computer-aided navigation systems are a real-time motion tracking technology widely applied in oral implantology and endodontics to enhance precision and reduce complications. However, their reliability, accuracy, and usability in dentoalveolar surgery and maxillary bone augmentation remain underinvestigated. Methods: A systematic review following PRISMA guidelines was conducted and registered on PROSPERO (CRD42024610153). PubMed, Scopus, Web of Science, and Cochrane Library databases were searched until October 2024 to retrieve English eligible studies, without restrictions on the publication year, on dynamic computer-assisted navigation systems in dentoalveolar and bone augmentation surgeries. Exclusion criteria were surgery performed without dynamic computer-assisted navigation systems; dental implant placement; endodontic surgery; and maxillo-facial surgery. The outcomes were reliability, accuracy, post-operative course, surgical duration, complications, patient- and clinician-reported usability, acceptability, and satisfaction. Included studies were qualitatively synthetized and judged using dedicated tools for the different study designs. Results: Twenty-nine studies with 214 patients were included, showing high reliability in dentoalveolar and bone augmentation surgeries comparable to or superior to freehand surgeries, higher accuracy in dentoalveolar surgery compared to maxillary bone augmentation, and reduced complication rates across all surgeries. While overall surgical duration slightly increased due to technology installation, operative time was reduced in third molar extractions. Patient-reported outcomes were poorly investigated. Clinician-reported outcomes were mixed, but difficulties in the differentiation of soft tissue from hard tissue were recorded, especially in sinus floor elevation. Conclusions: Dynamic computer-assisted navigation systems enhance accuracy and safety in dentoalveolar and bone augmentation surgery. Further studies are needed to assess the underinvestigated patient-reported outcomes and standardize protocols. Full article

Background/Objectives: This prospective intervention study examined the learning effect of using 3D-printed phantom heads with cleft lip and palate (CLP) and upper jaw models with CLP and maxillary plates during a lecture for dental students in their fourth year at J. W. Goethe Frankfurt University. The primary aim was to evaluate the impact of 3D-printed models on students’ satisfaction levels along with their understanding and knowledge in dental education. Methods: Six life-sized phantom heads with removable mandibles (three with unilateral and three with bilateral CLP) were designed using ZBrush software (Pixologic Inc., Los Angeles, CA, USA) based on MRI images and printed with an Asiga Pro 4K 3D printer (Asiga, Sydney, Australia). Two groups of students (n = 81) participated in this study: the control (CTR) group (n = 39) attended a standard lecture on cleft lip and palate, while the intervention (INT) group (n = 42) participated in a hands-on seminar with the same theoretical content, supplemented by 3D-printed models. Before and after the session, students completed self-assessment questionnaires and a multiple-choice test to evaluate knowledge improvement. Data analysis was conducted using the chi-square test for individual questions and the Wilcoxon rank test for knowledge gain, with the significance level set at 0.05. Results: The study demonstrated a significant knowledge increase in both groups following the lecture (p < 0.001). Similarly, there were significant differences in students’ self-assessments before and after the session (p < 0.001). The knowledge gain in the INT group regarding the anatomical features of unilateral cleft lip and palate was significantly higher compared to that in the CTR group (p < 0.05). Conclusions: The results of this study demonstrate the measurable added value of using 3D-printed models in dental education, particularly in enhancing students’ understanding of the anatomy of cleft lip and palate. Full article