Search Results (7)

Cyanate, a toxic product from the chemical oxidation treatment of highly toxic cyanide, can be converted to harmless ammonia and carbon dioxide by cyanase (EC 4.2.1.104). Cyanase from Thermomyces lanuginosus was entrapped in biomimetic silica to improve stability and reusability. After entrapment, the enzyme’s activity increased by two-fold, and the residual activity after 30-min of incubation at 60 °C also increased by two-fold, compared to the free enzyme. After being stored at room temperature for 28 days, the entrapped cyanase retained 79% of the initial activity, while the free form retained 61%. The immobilized cyanase was successfully applied to cyanate detoxification; the co-entrapment of carbonic anhydrase from Sulfurihydrogenibium azorense decreased the amount of bicarbonate necessary for cyanate detoxification by 50%. The cyanate degradation retained 53% of the initial value after the co-entrapped cyanate and carbonic anhydrase were reused five times. Full article

The release of cyanide from cyanogenic precursors is the central core of the plant defences based on the cyanogenesis process. Although cyanide is formed as a coproduct of some metabolic routes, its production is mostly due to the degradation of cyanohydrins originating from cyanogenic glycosides in cyanogenic plants and the 4-OH-ICN route in Brassicaceae. Cyanohydrins are then hydrolysed in a reversible reaction generating cyanide, being both, cyanohydrins and cyanide, toxic compounds with potential defensive properties against pests and pathogens. Based on the production of cyanogenic-derived molecules in response to the damage caused by herbivore infestation, in this review, we compile the actual knowledge of plant cyanogenic events in the plant–pest context. Besides the defensive potential, the mode of action, and the targets of the cyanogenic compounds to combat phytophagous insects and acari, special attention has been paid to arthropod responses and the strategies to overcome the impact of cyanogenesis. Physiological and behavioural adaptations, as well as cyanide detoxification by β-cyanoalanine synthases, rhodaneses, and cyanases are common ways of phytophagous arthropods defences against the cyanide produced by plants. Much experimental work is needed to further understand the complexities and specificities of the defence–counter-defence system to be applied in breeding programs. Full article

The reaction condition for purifying carbonic anhydrase from Sulfurihydrogenibium yellowstonense (SspCA) by direct heating without prior cell lysis was optimized; heating at 70 °C for 5 min resulted in the highest total activity of 23,460 WAU (Wilbur–Anderson unit) from a 50 mL culture. Heat-purified SspCA was examined for its capability to increase the rate of the mineralization of CO₂; compared with an uncatalyzed control, the onset time of CaCO₃ formation was shortened by up to 71%. Cyanase can be used to degrade toxic cyanate; however, one of the limitations of this biomimetic process is that the reaction needs HCO₃⁻ as a substrate. Heat-purified SspCA was combined with heat-purified cyanase from Thermomyces lanuginosus to alleviate the HCO₃⁻ dependence; in industrial wastewater, the HCO₃⁻ required was reduced by 50% when 0.75 WAU of SspCA was added. Heat-purified SspCA is stable at 4 °C; 88% of the initial activity was retained for up to five weeks. Partially purified SspCA can be obtained with ease and applied to a variety of applications. Full article

A green and low-cost removal method for cyanate, a toxic byproduct from the treatment of cyanide, is still needed. Cyanase converts cyanate to CO₂ and NH₃, but its industrial practicality is limited because the reaction requires HCO₃⁻ as a substrate. In this study, we used carbonic anhydrase from Sulfurihydrogenibium azorense (SazCA) to provide HCO₃⁻ for cyanase from Thermomyces lanuginosus (TlCyn); both TlCyn and SazCA were purified by one-step heating without prior cell lysis. The heat treatment resulted in higher activities of both enzymes than the conventional two-step process. From a 50 mL-culture, the highest total activity of 147 U and 47,174 WAU was obtained from 5 min of heating at 60 and 80 °C for TlCyn and SazCA, respectively. The coupled enzymatic system was used to degrade cyanate in three different matrices: 50 mM Tris-HCl (pH 8), industrial wastewater, and artificial wastewater. In the industrial wastewater, with the addition of 0.75 WAU (Wilbur-Anderson unit) of SazCA, cyanate degradation using 0.5 mM NaHCO₃ was similar to that using 3 mM NaHCO₃, indicating an 83% reduction in NaHCO₃. We have demonstrated that the dependence on HCO₃⁻ of cyanate degradation can be effectively alleviated by using low-cost heat-purified TlCyn and SazCA; the industrial practicality of the coupled enzymatic system is therefore improved. Full article

Recombinant DNA technology offered the creation of new combinations of DNA segments that are not found together in nature. The present study aimed to produce an ecofriendly bioremediation model to remediate cyanide pollution from a polluted marine system. Cyanide is a known toxic compound produced through natural and anthropogenic activities. An Agrobacterium-tumefaciens-mediated genetic transformation technique was used to generate transformed Chlamydomonas reinhardtii using plant expression vector pTRA-K-cTp carries isolated coding sequence of the cyanobacterial cyanase gene (CYN) isolated from Synechococcus elongatus (PCC6803). qRT-PCR analysis showed the overexpression of CYN in transgenic C. reinhardtii, as compared with the respective wild type. Growth parameters and biochemical analyses were performed under cyanide stress conditions using transgenic and wild C. reinhardtii for evaluating the effect of the presence of the cyanobacterial cyanase gene in algae. The transgenic C. reinhardtii strain (TC. reinhardtii-2) showed promising results for cyanide bioremediation in polluted water samples. Cyanide depletion assays and algal growth showed a significant resistance in the transgenic type against cyanide stress, as compared to the wild type. Genetically modified alga showed the ability to phytoremediate a high level of potassium cyanide (up to150 mg/L), as compared to the wild type. The presence of the CYN gene has induced a protection response in TC. Reinhardtii-2, which was shown in the results of growth parameter analyses. Therefore, the present study affirms that transgenic C. reinhardtii by the CYN coding gene is a potential effective ecofriendly bioremediator model for the remediation of cyanide pollutants in fresh water. Full article

The interconversion of CO₂ and HCO₃⁻ is catalyzed by a superfamily of metalloenzymes, known as carbonic anhydrases (CAs, EC 4.2.1.1), which maintain the equilibrium between dissolved inorganic CO₂ and HCO₃⁻. In the genome of Escherichia coli, a Gram-negative bacterium typically colonizing the lower intestine of warm-blooded organisms, the cyn operon gene includes the CynT gene, encoding for a β-CA, and CynS gene, encoding for the cyanase. CynT (β-CA) prevents the depletion of the cellular bicarbonate, which is further used in the reaction catalyzed by cyanase. A second β-CA (CynT2 or Can or yadF), as well as a γ and ι-CAs were also identified in the E. coli genome. CynT2 is essential for bacterial growth at atmospheric CO₂ concentration. Here, we characterized the kinetic properties and the anion inhibition profiles of recombinant CynT2. The enzyme showed a good activity for the physiological CO₂ hydratase reaction with the following parameters: k_cat = 5.3 × 10⁵ s⁻¹ and k_cat/K_M = of 4.1 × 10⁷ M⁻¹ s⁻¹. Sulfamide, sulfamate, phenylboronic acid, phenylarsonic acid, and diethyldithiocarbamate were the most effective CynT2 inhibitors (K_I = 2.5 to 84 µM). The anions allowed for a detailed understanding of the interaction of inhibitors with the amino acid residues surrounding the catalytic pocket of the enzyme and may be used as leads for the design of more efficient and specific inhibitors. Full article

The alkaliphilic bacterium Pseudomonas pseudoalcaligenes CECT5344 can grow with cyanate, cyanide, or cyanide-containing industrial residues as the sole nitrogen source, but the assimilation of cyanide and cyanate takes place through independent pathways. Therefore, cyanide degradation involves a chemical reaction between cyanide and oxaloacetate to form a nitrile that is hydrolyzed to ammonium by the nitrilase NitC, whereas cyanate assimilation requires a cyanase that catalyzes cyanate decomposition to ammonium and carbon dioxide. The P. pseudoalcaligenes CECT5344 cynFABDS gene cluster codes for the putative transcriptional regulator CynF, the ABC-type cyanate transporter CynABD, and the cyanase CynS. In this study, transcriptional analysis revealed that the structural cynABDS genes constitute a single transcriptional unit, which was induced by cyanate and repressed by ammonium. Mutational characterization of the cyn genes indicated that CynF was essential for cynABDS gene expression and that nitrate/nitrite transporters may be involved in cyanate uptake, in addition to the CynABD transport system. Biodegradation of hazardous jewelry wastewater containing high amounts of cyanide and metals was achieved in a batch reactor operating at an alkaline pH after chemical treatment with hydrogen peroxide to oxidize cyanide to cyanate. Full article