Search Results (47)

To improve path planning performance for mobile robots in complex environments, this study proposes a hybrid method combining an improved jump point search (JPS) algorithm with the dynamic window approach (DWA). In global planning, a quadrant pruning strategy guided by the target direction and a sine-enhanced heuristic function reduces the search space and accelerates planning. Natural jump points are retained for path continuity, and the path is smoothed using cubic B-spline curves. In local planning, DWA is enhanced by incorporating a target orientation factor, a safety distance penalty, and a normalization mechanism into the cost function. An adaptive weighting strategy dynamically balances goal-directed motion and obstacle avoidance. Simulation experiments in static and complex environments with unknown and dynamic obstacles demonstrate the method’s effectiveness. Compared to the standard approach, the improved JPS reduces search time by 36.7% and node expansions by 60.9%, with similar path lengths. When integrated with DWA, the robot adapts effectively to changing obstacles, ensuring safe and efficient navigation. The proposed method significantly enhances the real-time performance and safety of path planning in dynamic and uncertain environments. Full article

To address the challenge of optimizing system adaptability, disturbance rejection, control precision, and convergence speed simultaneously in four-wheel steering (4WS) stability control, a 4WS controller with a variable steering ratio (VSR) strategy and fast adaptive super-twisting (FAST) sliding mode control is proposed to control and output the steering angles of four wheels. The ideal VSR strategy is designed based on the constant yaw rate gain, and a cubic quasi-uniform B-spline curve fitting method is innovatively used to optimize the VSR curve, effectively mitigating steering fluctuations and obtaining precise reference front wheel angles. A controller based on FAST is designed for active rear wheel steering control using a symmetric 4WS vehicle model. Under double-lane change conditions with varying speeds, the simulations show that, compared with the constant steering ratio, the proposed VSR strategy enhances low-speed sensitivity and high-speed stability, improving the system’s adaptability to different operating conditions. Compared with conventional sliding mode control methods, the proposed FAST algorithm reduces chattering while increasing convergence speed and control precision. The VSR-FAST controller achieves optimization levels of more than 7.3% in sideslip angle and over 41% in yaw rate across different speeds, achieving an overall improvement in the stability control performance of the 4WS system. Full article

This paper proposes an enhanced RRT* algorithm (XN-RRT*) to address the challenges of low path planning efficiency and suboptimal picking success rates in complex pitaya harvesting environments. The algorithm generates sampling points based on normal distribution and dynamically adjusts the center and range of the sampling distribution according to the target distance and tree density, thus reducing redundant sampling. An improved artificial potential field method is employed during tree expansion, incorporating adjustment factors and target points to refine the guidance of sampling points and overcome local optima and infeasible targets. A greedy algorithm is then used to remove redundant nodes, shorten the path, and apply cubic B-spline curves to smooth the path, improving the stability and continuity of the robotic arm. Simulations in both two-dimensional and three-dimensional environments demonstrate that the XN-RRT* algorithm performs effectively, with fewer iterations, high convergence efficiency, and superior path quality. The simulation of a six-degree-of-freedom robotic arm in a pitaya orchard environment using the ROS2 platform shows that the XN-RRT* algorithm achieves a 98% picking path planning success rate, outperforming the RRT* algorithm by 90.32%, with a 27.12% reduction in path length and a 14% increase in planning success rate. The experimental results confirm that the proposed algorithm exhibits excellent overall performance in complex harvesting environments, offering a valuable reference for robotic arm path planning. Full article

This paper presents a novel gait design for serpentine robots to smoothly wrap around and traverse vibration-damping hammers along overhead power lines. Cubic quasi-uniform B-spline curves are utilized to seamlessly transition between helical segments of varying diameters during obstacle crossing, effectively reducing motion-induced impacts. The design begins by determining the control points of the B-spline curves to ensure posture continuity and prevent collisions with surrounding hardware obstacles, resulting in the derivation of an obstacle-crossing curve equation. Using this equation, the node coordinates and postures of individual robot units are computed, followed by the calculation of joint angles via inverse kinematics. A dual-chain Hopf oscillator is then employed to generate the obstacle-crossing gait. The feasibility of the proposed gait is validated through simulations in CoppeliaSim and Simulink, which model the robot’s motion as it wraps around and crosses eccentric obstacles with varying diameters. Additionally, a simulation platform is developed to analyze variations in joint angles and angular velocities during obstacle traversal. Results demonstrate that the gait, generated by combining cubic quasi-uniform B-spline curves with a dual-chain Hopf oscillator, achieves smooth and stable wrapping and crossing of vibration-damping hammers. The robot exhibits no abrupt changes in joint angles, smooth angular velocity profiles without sharp peaks, and impact-free joint interactions, ensuring reliable performance in complex environments. Full article

Urban drone applications require efficient path planning to ensure safe and optimal navigation through complex environments. Drawing inspiration from the collective intelligence of animal groups and electoral processes in human societies, this study integrates hierarchical structures and group interaction behaviors into the standard Particle Swarm Optimization algorithm. Specifically, competitive and supportive behaviors are mathematically modeled to enhance particle learning strategies and improve global search capabilities in the mid-optimization phase. To mitigate the risk of convergence to local optima in later stages, a mutation mechanism is introduced to enhance population diversity and overall accuracy. To address the challenges of urban drone path planning, this paper proposes an innovative method that combines a path segmentation and prioritized update algorithm with a cubic B-spline curve algorithm. This method enhances both path optimality and smoothness, ensuring safe and efficient navigation in complex urban settings. Comparative simulations demonstrate the effectiveness of the proposed approach, yielding smoother trajectories and improved real-time performance. Additionally, the method significantly reduces energy consumption and operation time. Overall, this research advances drone path planning technology and broadens its applicability in diverse urban environments. Full article

The tubercles on the flipper of humpback whales are beneficial for improving their locomotion performance. Based on biomimetic design, the bulge model was developed to mimic this function through cubic B-spline curve fitting, aiming to improve the stall performance of the two-element wingsail. The numerical calculation method was validated against experiments to ensure the reliability of the numerical results. Five models of the bulges of the main wing were developed, and the influence of different bulges on the stall performance of the two-element wingsail under logarithmic gradient wind conditions was examined. By analyzing its lift and drag characteristics, pressure load distribution, and flow field near the stall angle, the mechanism by which the bulges improved the stall characteristics of the two-element wingsail was revealed. The result indicated that the two-element wingsail in the Case 5 scheme has a maximum lift coefficient of 1.25, and that the lift reduction in the early stage of stall is only 8.8%, which is 43.6% less than the original wingsail lift reduction. As the bulge size increases the strength of the forward vortex created by the middle larger bulge increases, resulting in the absence of a symmetrical vortex structure on the suction surface of the wingsail, causing high fluid momentum band deflection. The energy of the boundary layer is supplemented by vorticity transport, promoting the formation of attached flow on the side of the smaller bulge and improving the lift coefficient. Full article

The static aeroelastic characteristics of the distributed propulsion wing (DPW) were studied using the CFD/CSD loose coupling method in this study. The momentum source method of the Reynolds-averaged Navier–Stokes equation based on the k-ω SST turbulence model solution was used as the CFD solution module. The upper and lower surfaces of the DPW were established using the cubic B-spline basis function method, and the surfaces of the inlet and outlet were established using the fourth-order Bezier curve. Finally, a three-dimensional parametric model of the DPW was established. A structural finite-element model of the DPW was established, a multipoint array method program based on the three-dimensional radial basis function (RBF) was written as a data exchange module to realize the aerodynamic and structural data exchange of the DPW’s static aeroelastic analysis process, and, finally, an aeroelastic analysis of the DPW was achieved. The results show that the convergence rate of the CFD/CSD loosely coupled method is fast, and the structural static aeroelastic deformation is mainly manifested as bending deformation and positive torsion deformation, which are typical static aeroelastic phenomena of the straight wing. Under the influence of static aeroelastic deformation, the increase in the lift characteristics of the DPW is mainly caused by the slipstream region of the lower surface and the non-slipstream region of the upper and lower surface. Meanwhile, the increase in its nose-up moment and the increase in the longitudinal static stability margin may have an impact on the longitudinal stability of the UAV. To meet the requirements of engineering applications, a rapid simulation method of equivalent airfoil, which can be applied to commercial software for analysis, was developed, and the effectiveness of the method was verified via comparison with the CFD/CSD loose coupling method. On this basis, the static aeroelastic characteristics of the UAV with DPWs were studied. The research results reveal the static aeroelastic characteristics of the DPW, which hold some significance for engineering guidance for this kind of aircraft. Full article

To improve the safety and reliability of robotic manipulators during high-speed precision movements, this paper proposes a method for smooth and time-optimal trajectory planning incorporating kinodynamic constraints. The primary objective is to use an evolutionary algorithm to determine a trajectory by considering time and jerk within the feasible path-pseudo-velocity phase plane region. Firstly, the path parameterization theory extracted the maximum pseudo-velocity projection curve from the kinodynamic constraints. Subsequently, the feasible region in the phase plane was defined through reachability analysis of discrete linear systems. Thereafter, we constructed the trajectory function using a cubic B-spline curve, optimizing its control points with an improved carnivorous plant optimization algorithm. Finally, the effectiveness and practicality of this method were verified through simulations on a 6-DOF manipulator. Full article

The wheat harvesting boundary line is vital reference information for the path tracking of an autonomously driving combine harvester. However, unfavorable factors, such as a complex light environment, tree shade, weeds, and wheat stubble color interference in the field, make it challenging to identify the wheat harvest boundary line accurately and quickly. Therefore, this paper proposes a harvest boundary line recognition model for wheat harvesting based on the MV3_DeepLabV3+ network framework, which can quickly and accurately complete the identification in complex environments. The model uses the lightweight MobileNetV3_Large as the backbone network and the LeakyReLU activation function to avoid the neural death problem. Depth-separable convolution is introduced into Atrous Spatial Pyramid Pooling (ASPP) to reduce the complexity of network parameters. The cubic B-spline curve-fitting method extracts the wheat harvesting boundary line. A prototype harvester for wheat harvesting boundary recognition was built, and field tests were conducted. The test results show that the wheat harvest boundary line recognition model proposed in this paper achieves a segmentation accuracy of 98.04% for unharvested wheat regions in complex environments, with an IoU of 95.02%. When the combine harvester travels at 0~1.5 m/s, the normal speed for operation, the average processing time and pixel error for a single image are 0.15 s and 7.3 pixels, respectively. This method could achieve high recognition accuracy and fast recognition speed. This paper provides a practical reference for the autonomous harvesting operation of a combine harvester. Full article

This research aims to explore and compare several nonparametric regression techniques, including smoothing splines, natural cubic splines, B-splines, and penalized spline methods. The focus is on estimating parameters and determining the optimal number of knots to forecast cyclic and nonlinear patterns, applying these methods to simulated and real-world datasets, such as Thailand’s coal import data. Cross-validation techniques are used to control and specify the number of knots, ensuring the curve fits the data points accurately. The study applies nonparametric regression to forecast time series data with cyclic patterns and nonlinear forms in the dependent variable, treating the independent variable as sequential data. Simulated data featuring cyclical patterns resembling economic cycles and nonlinear data with complex equations to capture variable interactions are used for experimentation. These simulations include variations in standard deviations and sample sizes. The evaluation criterion for the simulated data is the minimum average mean square error (MSE), which indicates the most efficient parameter estimation. For the real data, monthly coal import data from Thailand is used to estimate the parameters of the nonparametric regression model, with the MSE as the evaluation metric. The performance of these techniques is also assessed in forecasting future values, where the mean absolute percentage error (MAPE) is calculated. Among the methods, the natural cubic spline consistently yields the lowest average mean square error across all standard deviations and sample sizes in the simulated data. While the natural cubic spline excels in parameter estimation, B-splines show strong performance in forecasting future values. Full article

The cultivation model for spindle-shaped apple trees is widely used in modern standard apple orchards worldwide and represents the direction of modern apple industry development. However, without an effective obstacle avoidance path, the robotic arm is prone to collision with obstacles such as fruit tree branches during the picking process, which may damage fruits and branches and even affect the healthy growth of fruit trees. To address the above issues, a three-dimensional path -planning algorithm for full-field fruit obstacle avoidance harvesting for spindle-shaped fruit trees, which are widely planted in modern apple orchards, is proposed in this study. Firstly, based on three typical tree structures of spindle-shaped apple trees (free spindle, high spindle, and slender spindle), a three-dimensional spatial model of fruit tree branches was established. Secondly, based on the grid environment representation method, an obstacle map of the apple tree model was established. Then, the initial pheromones were improved by non-uniform distribution on the basis of the original ant colony algorithm. Furthermore, the updating rules of pheromones were improved, and a biomimetic optimization mechanism was integrated with the beetle antenna algorithm to improve the speed and stability of path searching. Finally, the planned path was smoothed using a cubic B-spline curve to make the path smoother and avoid unnecessary pauses or turns during the harvesting process of the robotic arm. Based on the proposed improved ACO algorithm (ant colony optimization algorithm), obstacle avoidance 3D path planning simulation experiments were conducted for three types of spindle-shaped apple trees. The results showed that the success rates of obstacle avoidance path planning were higher than 96%, 86%, and 92% for free-spindle-shaped, high-spindle-shaped, and slender-spindle-shaped trees, respectively. Compared with traditional ant colony algorithms, the average planning time was decreased by 49.38%, 46.33%, and 51.03%, respectively. The proposed improved algorithm can effectively achieve three-dimensional path planning for obstacle avoidance picking, thereby providing technical support for the development of intelligent apple picking robots. Full article

With the development of smart agriculture, autopilot technology is being used more and more widely in agriculture. Because most of the current global path planning only considers the shortest path, it is difficult to meet the articulated steering tractor operation needs in the orchard environment and address other issues, so this paper proposes a hybrid algorithm of an improved bidirectional search A* algorithm and improved differential evolution genetic algorithm(AGADE). First, the integrated priority function and search method of the traditional A* algorithm are improved by adding weight influence to the integrated priority, and the search method is changed to a bidirectional search. Second, the genetic algorithm fitness function and search strategy are improved; the fitness function is set as the path tree row center offset factor; the smoothing factor and safety coefficient are set; and the search strategy adopts differential evolution for cross mutation. Finally, the shortest path obtained by the improved bidirectional search A* algorithm is used as the initial population of an improved differential evolution genetic algorithm, optimized iteratively, and the optimal path is obtained by adding kinematic constraints through a cubic B-spline curve smoothing path. The convergence of the AGADE hybrid algorithm and GA algorithm on four different maps, path length, and trajectory curve are compared and analyzed through simulation tests. The convergence speed of the AGADE hybrid algorithm on four different complexity maps is improved by 92.8%, 64.5%, 50.0%, and 71.2% respectively. The path length is slightly increased compared with the GA algorithm, but the path trajectory curve is located in the center of the tree row, with fewer turns, and it meets the articulated steering tractor operation needs in the orchard environment, proving that the improved hybrid algorithm is effective. Full article

The research on additive manufacturing (AM) path planning mainly focuses on the traditional three-axis AM path planning and five-degree-of-freedom (DOF) AM path planning, while there is less research on six-DOF AM path planning. In the traditional AM path planning algorithm, the filling path is discontinuous and there is long straight-line printing in a certain direction, which can easily lead to warpage deformation. Therefore, in this work, the six-DOF manipulator is taken as the main object to build an AM platform, and the mechanism of AM path planning of the manipulator is studied. The path planning algorithm combining the contour offset filling method and Hilbert curve filling is optimized by using a cubic uniform B-spline curve, and an AM path planning algorithm suitable for a six-DOF manipulator is obtained. A continuous printing path can be generated by this algorithm. It reduces the existence of long straight-line printing in a certain direction, thereby reducing the warpage deformation of the model and improving the molding quality of the model. The traditional three-axis AM device and the six-DOF AM platform were used to print two kinds of models. By comparing the printing time, the six-DOF AM platform was 43.70% and 37.94% shorter than the traditional three-axis AM device. The same model was printed on a six-DOF AM platform by using the parallel scanning filling method, the path planning algorithm combining contour offset and Hilbert curve, and the method proposed in this paper. Through experimental verification, the average warpage deformation of the model printed by the method proposed in this paper was reduced by 37.81% and 13.79%, respectively, compared with the other two methods. Full article

In view of the fact that the global planning algorithm cannot avoid unknown dynamic and static obstacles and the local planning algorithm easily falls into local optimization in large-scale environments, an improved path planning algorithm based on the integration of A* and DWA is proposed and applied to driverless ferry vehicles. Aiming at the traditional A* algorithm, the vector angle cosine value is introduced to improve the heuristic function to enhance the search direction; the search neighborhood is expanded and optimized to improve the search efficiency; aiming at the problem that there are many turning points in the A* algorithm, a cubic quasi-uniform B-spline curve is used to smooth the path. At the same time, fuzzy control theory is introduced to improve the traditional DWA so that the weight coefficient of the evaluation function can be dynamically adjusted in different environments, effectively avoiding the problem of a local optimal solution. Through the fusion of the improved DWA and the improved A* algorithm, the key nodes in global planning are used as sub-target punctuation to guide the DWA for local planning, so as to ensure that the ferry vehicle avoids obstacles in real time. Simulation results show that the fusion algorithm can avoid unknown dynamic and static obstacles efficiently and in real time on the basis of obtaining the global optimal path. In different environment maps, the effectiveness and adaptability of the fusion algorithm are verified. Full article

The quest for efficient and safe trajectory planning in robotic manipulation poses significant challenges, particularly in complex obstacle environments where the risk of encountering singularities and obstacles is high. Addressing this critical issue, our study presents a novel enhancement of the Fast Marching Tree (FMT) algorithm, ingeniously designed to navigate the complex terrain of Cartesian space with an unprecedented level of finesse. At the heart of our approach lies a sophisticated two-stage path point sampling strategy, ingeniously coupled with a singularity avoidance mechanism that leverages geometric perception to assess and mitigate the risk of encountering problematic configurations. This innovative method not only facilitates seamless obstacle navigation but also adeptly circumvents the perilous zones of singularity, ensuring a smooth and uninterrupted path for the robotic arm. To further refine the trajectory, we incorporate a quasi-uniform cubic B-spline curve, optimizing the path for both efficiency and smoothness. Our comprehensive simulation experiments underscore the superiority of our algorithm, showcasing its ability to consistently achieve shorter, more efficient paths while steadfastly avoiding obstacles and singularities. The practical applicability of our method is further corroborated through successful implementation in real-world robotic arm trajectory planning scenarios, highlighting its potential to revolutionize the field with its robustness and adaptability. Full article