Search Results (598)

This study aimed to analyse the spatiotemporal evolution of phytoplankton community dynamics and its underlying mechanisms in the Liaoning section of the Liao River Basin in 2010, 2015, and 2020. Phytoplankton species diversity increased significantly, with an increase from three phyla and 31 species in 2010 to six phyla and 74 species in 2020. Concurrent increases in α-diversity indicated continuous improvements in habitat heterogeneity. The community structure shifted from a diatom-dominated assemblage to a green algae–diatom co-dominated configuration, contributing to an enhanced water purification capacity. The upstream agricultural zone (Tieling section) had elevated biomass and low diversity, indicating persistent non-point-source pollution stress. The midstream urban–industrial zone (Shenyang–Anshan section) emerged as a phytoplankton diversity hotspot, likely due to expanding niche availability in response to point-source pollution control. The downstream wetland zone (Panjin section) exhibited significant biomass decline and delayed diversity recovery, shaped by the dual pressures of resource competition and habitat filtering. The driving mechanism of community succession shifted from nutrient-dominated factors (NH₃-N, TN) to redox-sensitive factors (DO, pH). These findings support a ‘zoned–graded–staged’ ecological restoration strategy for the Liao River Basin and inform the use of phytoplankton as bioindicators in watershed monitoring networks. Full article

Vegetables and fruits grown in urban areas pose a potential threat to human health due to contamination with heavy metals (HMs). This study aimed to identify and quantify the concentrations of heavy metals (Fe, Mn, Zn, Cu, Pb, Cd) in tomatoes, leafy vegetables, and fruits collected from 16 allotment gardens (AGs) located in Warsaw. A total of 112 samples were analyzed (72 vegetable and 40 fruit samples). Vegetables from AGs accumulated significantly higher levels of HMs than fruits. Leafy vegetables, particularly those cultivated near high-traffic roads, exhibited markedly elevated levels of Pb, Cd, and Zn compared to those grown in peripheral areas. Lead concentrations exceeded permissible limits by six to twelve times, cadmium by one to thirteen times, and zinc by 0.7 to 2.4 times. Due to high levels of Pb and Cd, tomatoes should not be cultivated in urban environments. Regardless of location, only trace amounts of HMs were detected in fruits. The greatest health risk is associated with the consumption of leafy vegetables. Lettuce should be considered an indicator plant for assessing environmental contamination. The obtained Hazard Index (HI) values indicate that only the tested fruits are safe for consumption. Meanwhile, the values of the Hazard Quotient (HQ) indicate no health risk associated with the consumption of lettuce, cherries, and red currants. Among the analyzed elements, Pb showed a higher potential health risk than other metals. This study emphasizes the need for continuous monitoring of HM levels in urban soils and the establishment of baseline values for public health purposes. Remediation of contaminated soils and the implementation of safer agricultural practices are recommended to reduce the exposure of urban populations to the risks associated with the consumption of contaminated produce. In addition, the safety of fruits and vegetables grown in urban areas is influenced by the location of the AGs and the level of industrialization of the agglomeration. Therefore, the safety assessment of plant products derived from AGs should be monitored on a continuous basis, especially in vegetables. Full article

The air quality within urban public transport is a critical determinant of passenger health. In the crowded and poorly ventilated cabins of Almaty’s metro, buses, and trolleybuses, concentrations of CO₂ and PM_2.5 often accumulate, elevating the risk of respiratory and cardiovascular diseases. This study investigates the air quality along three of the city’s busiest transport corridors, analyzing how the concentrations of CO₂, PM_2.5, and PM₁₀, as well as the temperature and relative humidity, fluctuate with the passenger density and time of day. Continuous measurements were collected using the Tynys mobile IoT device, which was bench-calibrated against a commercial reference sensor. Several machine learning models (logistic regression, decision tree, XGBoost, and random forest) were trained on synchronized environmental and occupancy data, with the XGBoost model achieving the highest predictive accuracy at 91.25%. Our analysis confirms that passenger occupancy is the primary driver of in-cabin pollution and that these machine learning models effectively capture the nonlinear relationships among environmental variables. Since the surveyed routes serve Almaty’s most densely populated districts, improving the ventilation on these lines is of immediate importance to public health. Furthermore, the high-temporal-resolution data revealed short-term pollution spikes that correspond with peak ridership, advancing the current understanding of exposure risks in transit. These findings highlight the urgent need to combine real-time monitoring with ventilation upgrades. They also demonstrate the practical value of using low-cost IoT technologies and data-driven analytics to safeguard public health in urban mobility systems. Full article

Salinity intrusion is a growing threat to freshwater resources, particularly in low-lying coastal and estuarine regions, necessitating the development of effective early warning systems (EWS) to support timely mitigation. Although various water quality monitoring technologies exist, many face challenges related to long-term sustainability, ongoing maintenance, and accessibility for local users. This study introduces a novel hybrid real-time salinity intrusion early warning system that uniquely integrates fixed and portable monitoring technologies with strong community participation—an approach not yet widely applied in comparable urban-adjacent delta regions. Unlike traditional systems, this model emphasizes local ownership, flexible data collection, and system scalability in resource-constrained environments. This study presents a real-time salinity intrusion early warning system for Bang Kachao, Thailand, combining eight fixed monitoring stations and 20 portable salinity measurement devices. The system was developed in response to community needs, with local input guiding both station placement and the design of mobile measurement tools. By integrating fixed stations for continuous, high-resolution data collection with portable devices for flexible, on-demand monitoring, the system achieves comprehensive spatial coverage and adaptability. A core innovation lies in its emphasis on community participation, enabling villagers to actively engage in monitoring and decision-making. The use of IoT-based sensors, Remote Telemetry Units (RTUs), and cloud-based data platforms further enhances system reliability, efficiency, and accessibility. Automated alerts are issued when salinity thresholds are exceeded, supporting timely interventions. Field deployment and testing over a seven-month period confirmed the system’s effectiveness, with fixed stations achieving 90.5% accuracy and portable devices 88.7% accuracy in detecting salinity intrusions. These results underscore the feasibility and value of a hybrid, community-driven monitoring approach for protecting freshwater resources and building local resilience in vulnerable regions. Full article

The sustainable development of eco-tourism is significantly influenced by multiple conditions within spatiotemporally continuous geographic scenarios. However, existing evaluations of the development value of eco-tourism resources (Eco-TRDVs) are non-spatial and do not sensitively represent their complex relationships. This study proposed a GIS approach for evaluating regional Eco-TRDVs by mapping the complex interconnections with spatial distances. Inherent and external conditions for evaluating Eco-TRDVs were classified under three indicators and digitized using GIS and remote sensing technologies. Then, the analytic hierarchy process and GIS cost distance analysis were introduced to define the initial values and cumulate Eco-TRDVs with distances. Taking the Taihang Honggu National Forest Park, China, as the case area, the Eco-TRDVs over the entire area in 2017 and 2020 were mapped. The results present a continuous spatial variability of Eco-TRDVs and comprehensively reflect the complex interconnections of constraint elements with spatial distances. The evaluation is sensitive to the intrinsic value of poles, as evidenced by the high development values and high-density distribution of their contours. Source additions improve the evaluation considerably, with transportation networks having a greater impact than economic development zones and urban elements. Furthermore, aggravated fragmentation of the price flow field increases spatial heterogeneity. The development value shows a negative linear correlation with distance. The proposed approach handles the spatially oriented relationships of the multi-conditions, and supports future planning and monitoring of spatial-temporal changes in eco-tourism development. Full article

Semantic segmentation of remote sensing imagery is a pivotal task for intelligent interpretation, with critical applications in urban monitoring, resource management, and disaster assessment. Recent advancements in deep learning have significantly improved RS image segmentation, particularly through the use of convolutional neural networks, which demonstrate remarkable proficiency in local feature extraction. However, due to the inherent locality of convolutional operations, prevailing methodologies frequently encounter challenges in capturing long-range dependencies, thereby constraining their comprehensive semantic comprehension. Moreover, the preprocessing of high-resolution remote sensing images by dividing them into sub-images disrupts spatial continuity, further complicating the balance between local feature extraction and global context modeling. To address these limitations, we propose DMA-Net, a Dynamic Morphology-Aware Segmentation Network built on an encoder–decoder architecture. The proposed framework incorporates three primary parts: a Multi-Axis Vision Transformer (MaxViT) encoder achieves a balance between local feature extraction and global context modeling through multi-axis self-attention mechanisms; a Hierarchy Attention Decoder (HA-Decoder) enhanced with Hierarchy Convolutional Groups (HCG) for precise recovery of fine-grained spatial details; and a Channel and Spatial Attention Bridge (CSA-Bridge) to mitigate the encoder–decoder semantic gap while amplifying discriminative feature representations. Extensive experimentation has been conducted to demonstrate the state-of-the-art performance of DMA-Net, which has been shown to achieve 87.31% mIoU on Potsdam, 83.23% on Vaihingen, and 54.23% on LoveDA, thereby surpassing existing methods. Full article

Air pollution poses a growing threat to public health and the environment, highlighting the need for continuous and precise urban air quality monitoring. The aim of this study was to implement and evaluate an autonomous air quality monitoring platform developed by the University of Ruse, “Angel Kanchev”, under Bulgaria’s National Recovery and Resilience Plan (project BG-RRP-2.013-0001), co-financed by the European Union through the NextGenerationEU initiative. The system, based on Libelium’s mobile sensor technology, was installed at a height of two meters on the university campus near Rodina Boulevard and operated continuously from 1 March 2024 to 30 March 2025. Every 15 min, it recorded concentrations of CO, CO₂, NO₂, SO₂, PM₁, PM_2.5, and PM₁₀, along with meteorological parameters (temperature, humidity, and pressure), transmitting the data via GSM to a cloud-based database. Analyses included a distributional assessment, Spearman rank correlations, Kruskal–Wallis tests with Dunn–Sidak post hoc comparisons, and k-means clustering to identify temporal and meteorological patterns in pollutant levels. The results indicate the high operational stability of the system and reveal characteristic pollution profiles associated with time of day, weather conditions, and seasonal variation. The findings confirm the value of combining calibrated IoT systems with advanced statistical methods to support data-driven air quality management and the development of predictive environmental models. Full article

The Tomographic Synthetic Aperture Radar (TomoSAR) technique is widely used for monitoring urban infrastructures, as it enables the mapping of individual scatterers across additional dimensions such as height (3D), thermal dilation (4D), and deformation velocity (5D). Retrieving this information is crucial for building management and maintenance. Nevertheless, accurately extracting it from TomoSAR data poses several challenges, particularly the presence of outliers due to uneven and limited baseline distributions. One way to address these issues is through statistical detection approaches such as the Generalized Likelihood Ratio Test, which ensures a Constant False Alarm Rate. While effective, these methods face two primary limitations: high computational complexity and the off-grid problem caused by the discretization of the search space. To overcome these drawbacks, we propose an approach that combines a quick initialization process using Fast-Sup GLRT with local descent optimization. This method operates directly in the continuous domain, bypassing the limitations of grid-based search while significantly reducing computational costs. Experiments conducted on both simulated and real datasets acquired with the TerraSAR-X satellite over the Spanish city of Barcelona demonstrate the ability of the proposed approach to maintain computational efficiency while improving scatterer localization accuracy in the third and fourth dimensions. Full article

Accurate land parcel segmentation in remote sensing imagery is critical for applications such as land use analysis, agricultural monitoring, and urban planning. However, existing methods often underperform in complex scenes due to small-object segmentation challenges, blurred boundaries, and background interference, often influenced by sensor resolution and atmospheric variation. To address these limitations, we propose a dual-stage framework that combines an enhanced YOLOv5s detector with the Segment Anything Model (SAM) to improve segmentation accuracy and robustness. The improved YOLOv5s module integrates Efficient Channel Attention (ECA) and BiFPN to boost feature extraction and small-object recognition, while Soft-NMS is used to reduce missed detections. The SAM module receives bounding-box prompts from YOLOv5s and incorporates morphological refinement and mask stability scoring for improved boundary continuity and mask quality. A composite Focal-Dice loss is applied to mitigate class imbalance. In addition to the publicly available CCF BDCI dataset, we constructed a new WuJiang dataset to evaluate cross-domain performance. Experimental results demonstrate that our method achieves an IoU of 89.8% and a precision of 90.2%, outperforming baseline models and showing strong generalizability across diverse remote sensing conditions. Full article

The present study investigates the extent and spatial distribution of metal concentration in stream sediments that flow into Keban Dam Lake, Turkey. Sediment samples were analysed for trace and potentially toxic elements (PTEs), including V, Cr, Co, Ni, Cu, Zn, Pb, Tl, Th, and U. Enrichment Factor (EF), Contamination Factor (CF), Geo-accumulation Index (Igeo), and Pollution Load Index (PLI) were employed to assess contamination levels. Results reveal that Cr exhibited very high enrichment (EF = 15.95) in downstream urban samples, while Cu and Zn showed high enrichment in samples collected from the middle to lower reaches of the stream, probably indicating anthropogenic contributions. Most other elements, such as Pb, Tl, Th, and U, were within natural background levels. Sediment Quality Guidelines (SQGs) indicate that Cr, Ni, and Cu may pose potential ecological risks, especially in samples from urban-influenced and downstream areas where concentrations exceed the Probable Effect Levels (PEL; Cr: 160 mg/kg, Ni: 42.8 mg/kg, Cu: 108 mg/kg). Multivariate statistical analyses, including Pearson correlation and hierarchical clustering, reveal three distinct geochemical groupings. Among these, the most contaminated cluster—corresponding to midstream and downstream regions—is characterized by elevated Cu and Zn concentrations. Strong correlations among Cu–Zn, Ni–Cu, and Th–U suggest there is a combination of anthropogenic and lithogenic sources for most metals. While most sites showed low to moderate pollution, urban downstream locations exhibited significant metal accumulation, necessitating the region’s continued environmental monitoring and management strategies. Full article

Aerosol optical depth (AOD) serves as a critical indicator for atmospheric aerosol monitoring and air quality assessment, and quantifies the radiative attenuation caused by airborne particulate matter. This study uses MODIS remote sensing imagery together with land use transition datasets (2000–2020) and road network density metrics (2014–2020), to investigate the spatiotemporal evolution of AOD in Zhejiang Province and its synergistic correlations with urbanization patterns and transportation infrastructure. By integrating MODIS_1KM AOD product, grid-based road network density mapping, land use dynamic degree modeling, and transfer matrix analysis, this study systematically evaluates the interdependencies among aerosol loading, impervious surface expansion, and transportation network intensification. The results indicate that during the study period (2000–2020), the provincial AOD level shows a significant declining trend, with obvious spatial heterogeneity: the AOD values in eastern coastal industrial zones and urban agglomerations continue to increase, with lower values dominating southwestern forested highlands. Meanwhile, statistical analyses confirm highly positive correlations between AOD, impervious surface coverage, and road network density, emphasizing the dominant role of anthropogenic activities in aerosol accumulation. These findings provide actionable insights for enhancing land-use zoning, minimizing vehicular emissions, and developing spatially targeted air quality management strategies in rapidly urbanizing regions. This study provides a solid scientific foundation for advancing environmental sustainability by supporting policy development that balances urban expansion and air quality. It contributes to building more sustainable and resilient cities in Zhejiang Province. Full article

As the world’s third-longest river supporting 40% of China’s population, the Yangtze River Basin exemplifies the critical challenges of balancing riparian development and ecological resilience for major fluvial systems globally. This study analyzed the spatiotemporal evolution, proximity dynamics to the Yangtze River, and driving mechanisms of the “three types of spaces” (urban, agricultural, and ecological) in 130 counties along the Yangtze River mainstem from 2000 to 2020, utilizing an integrated approach incorporating land use transfer matrices, centroid-based distance metrics and GeoDetector models. Key findings reveal: (1) Urban space exhibited significant irreversible expansion while agricultural space continued to shrink, with ecological space maintaining overall stability but showing high-frequency bidirectional conversion with agricultural areas in localized zones. (2) Spatial proximity analysis demonstrated contrasting patterns—eastern riparian counties showed urban spatial agglomeration towards the river, whereas most mid-western regions experienced urban expansion away from the watercourse, with marked regional disparities in agricultural and ecological spatial changes. (3) Driving mechanism analysis identified topography as the dominant natural factor influencing ecological space evolution, while socioeconomic factors exerted stronger impacts on proximity variations of agricultural and urban spaces, with natural–socioeconomic interactive effects showing the most significant explanatory power. These spatial dynamics reflect universal trade-offs between economic development and ecosystem conservation in large river basins worldwide. We advocate differentiated spatial governance strategies, including rigorous riparian ecological redlines, eco-agricultural models in agricultural retreat zones, and proximity-based real-time monitoring for ecological early warning. The integrated methodology and spatial governance framework offer transferable solutions for sustainable management of major fluvial systems under rapid urbanization pressure. These findings provide scientific evidence and implementable pathways for coordinating socioeconomic development with ecosystem resilience in the Yangtze River Economic Belt. Full article

Urbanisation and land-use change are among the main pressures on soil health in periurban areas, but the multifunctionality of grassland soils is still not sufficiently recognised. In this study, the physical and chemical properties of soils under grassland, forest and croplands in the periurban area of Zagreb were investigated in a two-year period. Grasslands consistently exhibited multifunctional benefits, including high organic matter content (4.68% vs. 2.24% in cropland), improved bulk density (1.14 vs. 1.24 g cm⁻³) and an active carbon cycle indicated by increased CO₂ emissions (up to 1403 kg ha⁻¹ day⁻¹ in 2021). Forest soils showed the highest aggregate stability (91.4%) and infiltration (0.0006 cm s⁻¹), while croplands showed signs of structural degradation with the highest bulk density and lowest water retention (39.9%). Temporal variation showed that grassland was particularly responsive to favourable climatic conditions, with soil porosity and water content improving yearly. Principal component analysis showed that soil structure, biological activity and moisture regulation were linked, with grassland plots favourably positioned along the axes of resilience. The absence of tillage and the presence of permanent vegetation cover contributed to their high capacity for climate and water regulation and carbon sequestration. These results emphasise the importance of protecting and managing grasslands as an important component of urban green areas. Practices such as mulching, minimal disturbance and continuous cover can maximise the ecosystem services of grassland soils. In addition, the results highlight the potential risk of trace metal accumulation in cropland and grassland soils located near urban and farming infrastructure, underlining the need for regular monitoring in periurban environments. Integrating grassland functions into urban planning and policy is essential for improving the sustainability and resilience of periurban landscapes. Full article

Fast urbanization and economic development lead to a prosperous high-rise building industry with high material handling efficiency (MHE). However, the integrated material handling (IMH) framework optimization and empirical studies on Chinese high-rise buildings are not in-depth. Here, the IMH practice in Chinese Chongqing high-rise building projects (CHBPs) was researched, and the effect factors of MHE were discussed to propose improvement strategies. A questionnaire survey (191 participants), qualitative topic analysis, quantitative descriptive statistics, reliability/correlation analysis, an independent sample t-test, analysis of variance (ANOVA), and regression analysis were performed. As a result, the understanding of the IMH concept, effectiveness of training projects, and positive effect of regulations were found to favor an improved MHE. Moreover, a weak positive correlation between work experience and MHE was found. Through the proposed model development framework, the combination of theoretical analysis and empirical research can provide comprehensive tools and knowledge resources for IMH practices in CHBP to improve MHE. Through quantitative indicators such as the material handling efficiency index (MHEI), the training project impact score (TPIS) and the regulation perception index (RPI), this framework offers an objective basis for continuous monitoring and improvement. Full article

The acceleration of industrialization and urbanization worldwide has dramatically improved living standards but has also introduced serious environmental and public health challenges. One of the most critical challenges is air pollution, particularly indoors, where individuals typically spend over 90% of their time. Ensuring good Indoor Air Quality (IAQ) is essential, especially in heavily frequented public spaces such as shopping malls. This study focuses on assessing IAQ in a large shopping mall located in Tabuk, Saudi Arabia, covering retail zones as well as an attached underground parking area. Monitoring is conducted over a continuous two-month period using calibrated instruments placed at representative locations to capture variations in pollutant levels. The investigation targets key contaminants, including carbon monoxide (CO), carbon dioxide (CO₂), fine particulate matter (PM_2.5), total volatile organic compounds (TVOCs), and formaldehyde (HCHO). The data are analyzed and compared against international and national guidelines, including World Health Organization (WHO) standards and Saudi environmental regulations. The results show that concentrations of CO, CO₂, and PM_2.5 in the shopping mall are generally within acceptable limits, with values ranging from approximately 7 to 15 ppm, suggesting that ventilation systems are effective in most areas. However, the study identifies high levels of TVOCs and HCHO, particularly in zones characterized by poor ventilation and high human occupancy. Peak concentrations reach 1.48 mg/m³ for TVOCs and 1.43 mg/m³ for HCHO, exceeding recommended exposure thresholds. These findings emphasize the urgent need for enhancing ventilation designs, prioritizing the use of low-emission materials, and establishing continuous air quality monitoring protocols within commercial buildings. Improving IAQ is not only crucial for protecting public health but also for enhancing occupant comfort, satisfaction, and overall building sustainability. This study offers practical recommendations to policymakers, building managers, and designers striving to create healthier indoor environments in rapidly expanding urban centers. Full article