Search Results (211)

Free-space optical (FSO) communication systems face significant challenges from atmospheric turbulence, which induces time-correlated fading and burst errors that critically affect link reliability. This paper presents a comprehensive end-to-end CCSDS O3K simulation platform with detailed atmospheric channel and pointing error modeling, enabling realistic performance evaluation. The atmospheric channel model follows ITU-R P.1622-1 recommendations and incorporates amplitude scintillation with temporal correlation using Ornstein–Uhlenbeck processes, while the pointing error model captures beam misalignment effects inherent in satellite optical links. Through extensive Monte Carlo simulations, we investigate the impact of coherence time, and interleaving depth on system performance. Results show that deeper interleaving significantly improves reliability under realistic channel conditions, providing valuable design guidance for CCSDS-compliant optical communication systems. This study does not propose new algorithms or protocols; rather, it delivers the first end-to-end CCSDS-compliant simulation framework under realistically modeled turbulence and pointing errors. Accordingly, the results offer meaningful reference value and practical benchmarks for inter-satellite optical communication research and system design. Full article

Secure communication for critical command nodes has emerged as a pivotal challenge in modern warfare, in particular considering the vulnerability of these nodes to electronic reconnaissance. To cope with the severe interference, this paper proposes a robust solution for long-distance secure command and control system leveraging phase-modulated microwave photonic links. Studies that analyze the impairing nonlinear distortions and phase noise stemming from different sources in optical phase demodulation during long-haul transmission has been carried out, unveiling their impairment in coherent transmission systems. To overcome these limitations, a linearized phase demodulation and noise suppression technique based on composite optical phase-locked loop and multi-core fiber is proposed and experimentally validated. Experimental results demonstrate a long-haul transmission over 100 km with an 81 dB suppression for third-order intermodulation distortion and a 27 dB improvement in noise floor at 5 MHz under closed-loop condition, verifying a significant enhancement in the fidelity in long-distance transmission. This method ensures a highly reliable secure communication for command and control systems in contested electromagnetic environments. Full article

Narrow-linewidth broadband tunable external cavity diode lasers (NBTECDLs), with their broadband tuning range, narrow linewidth, high side-mode suppression ratio (SMSR), and high output power, have become important laser sources in many fields such as optical communication, spectral analysis, wavelength division multiplexing systems, coherent detection, and ultra-high-speed optical interconnection. This paper briefly describes the basic theory of NBTECDLs, introduces NBTECDLs with diffraction grating type, fiber Bragg grating (FBG) type, and waveguide type, and conducts an in-depth analysis on the working principles and performance characteristics of NBTECDLs based on different NBTECDL types. Then, it reviews the latest research progress on Littrow-type, Littman-type, FBG-type, and waveguide-type NBTECDLs in detail and compares and summarizes the characteristics of Littrow-type NBTECDLs, Littman-type NBTECDLs, FBG-type NBTECDLs, and waveguide-type NBTECDLs. Finally, it looks at the structural features, key technologies, optical performance, and application fields of the most cutting-edge research in recent years and summarizes the challenges and future development directions of NBTECDLs. Full article

The optical communication performance of cylindrical vector partially coherent Laguerre–Gaussian (PCLG) beams in different atmospheric turbulence models are investigated. Based on the unified theory of coherence and polarization and turbulence theory, analytical formulas for the signal-to-noise ratio (SNR), crosstalk equivalent intensity and bit error rate (BER) of cylindrical vector PCLG beams are derived in Kolmogorov turbulence, non-Kolmogorov turbulence and strong turbulence, respectively. Numerical analyses indicate that selecting a smaller azimuthal index l₀ or a larger radial index p₀ of beams can effectively enhance the SNR. In addition, selecting appropriate beam width, coherence length, wavelength of the beam, propagation distance and receiving aperture diameter enables the acquisition of the optimal signal detection position. Our results are conducive to the application of cylindrical vector PCLG beams in FSO communication. Full article

Narrow-linewidth semiconductor lasers have become indispensable devices in high-precision measurement and detection. Among various available technologies, self-injection locking plays a crucial role due to its significant ability to reduce linewidth and enhance coherence. Here, we demonstrate a hybrid feedback narrow-linewidth laser based on fixed external cavity feedback combined with self-injection locking feedback. The laser consists of a semiconductor gain chip, fiber Bragg grating, and micro-ring resonator, achieving laser mode selection and linewidth compression. Ultimately, a single longitudinal mode narrow-linewidth laser output with a Lorentzian linewidth of 149 Hz and a side-mode suppression ratio of 65 dB was obtained. The demonstrated laser can be applied in applications such as coherent optical communication and high-precision coherent detection. Full article

In order to enhance the performance of 112 Gb/s polarization-multiplexed quadrature phase-shift keying (PM-QPSK) coherent optical receivers, a novel digital signal processing (DSP) framework is presented in this study. The suggested method combines cutting-edge signal processing techniques to address important constraints in long-distance, high data rate coherent systems. The framework uses overlap frequency domain equalization (OFDE) for chromatic dispersion (CD) compensation, which offers a cheaper computational cost and higher dispersion control precision than traditional time-domain equalization. An adaptive carrier phase recovery (CPR) technique based on mean-squared differential phase (MSDP) estimation is incorporated to manage phase noise induced by cross-phase modulation (XPM), providing dependable correction under a variety of operating situations. When combined, these techniques significantly increase Q factor performance, and optimum systems can handle transmission distances of up to 2400 km. The suggested DSP approach improves phase stability and dispersion tolerance even in the presence of nonlinear impairments, making it a viable and effective choice for contemporary coherent optical networks. The framework’s competitiveness was evaluated by comparing it against the most recent, cutting-edge DSP methods that were released after 2021. These included CPR systems that were based on kernels, transformers, and machine learning. The findings show that although AI-driven approaches had the highest absolute Q factors, they also required a large amount of computing power. On the other hand, the suggested OFDE in conjunction with adaptive CPR achieved Q factors of up to 11.7 dB over extended distances with a significantly reduced DSP effort, striking a good balance between performance and complexity. Its appropriateness for scalable, long-haul 112 Gb/s PM-QPSK systems is confirmed by a complexity versus performance trade-off analysis, providing a workable and efficient substitute for more resource-intensive alternatives. Full article

To address the issues of link mismatch and channel impairment in wireless optical communication across atmospheric-oceanic media, this paper proposes a two-hop relay transmission architecture based on the multiple-input multiple-output (MIMO)-enhanced multi-level hybrid multiplexing. The system implements decode-and-forward operations via maritime buoy/ship relays, achieving physical layer isolation between atmospheric and oceanic channels. The transmitter employs coherent orthogonal frequency division multiplexing technology with quadrature amplitude modulation to achieve frequency division multiplexing of baseband signals, combines with orthogonal polarization modulation to generate polarization-multiplexed signal beams, and finally realizes multi-dimensional signal transmission through MIMO spatial diversity. To cope with cross-medium environmental interference, a composite channel model is established, which includes atmospheric turbulence (Gamma–Gamma model), rain attenuation, and oceanic chlorophyll absorption and scattering effects. Simulation results show that the multi-level hybrid multiplexing method can significantly improve the data transmission rate of the system. Since the system adopts three channels of polarization-state data, the data transmission rate is increased by 200%; the two-hop relay method can effectively improve the communication performance of cross-medium optical communication and fundamentally solve the problem of light transmission in cross-medium planes; the use of MIMO technology has a compensating effect on the impacts of both atmospheric and marine environments, and as the number of light beams increases, the system performance can be further improved. This research provides technical implementation schemes and reference data for the design of high-capacity optical communication systems across air-sea media. Full article

In recent years, micro-combs, due to their compact structure and high efficiency, have proven to be a practical solution for optical sources. In this paper, an approach to flexibly modulating micro-combs is proposed, and a simulation platform based on ${\mathrm{Si}}_3{\mathrm{N}}_4$ micro-combs with highly integrated, tunable, and reconfigurable features is built. By means of the Lugiato–Lefever equation model, the dynamic evolution process of micro-combs is analyzed, and a micro-ring resonator is designed with a free spectral range of 7.24 nm, an effective mode area of $1.0829{\mu \mathrm{m}}^2$, and coherent comb lines spanning over 125 THz. Cascaded silicon nitride micro-ring filters are utilized to obtain reconfigurable modulation effects for Kerr-frequency micro-combs. Due to the significance of flexibly controlled optical sources with high-repetition rates and multiple channels for system-on-chip, our proposal has potential in photonic integrated circuit systems, such as high-density photonic computing and large-capacity optical communications, in the future. Full article

Free-space optical communication has emerged as a pivotal technology for space-to-ground downlinks; however, signal degradation caused by atmospheric turbulence continues to pose a significant challenge. In this study, a model for the polarization transmission characteristics of a Gaussian-Schell model (GSM) beam in downlink was established, and conditions sufficient for maintaining the polarization transmission characteristics were derived. The impact of the source spatial coherence on the performance of optical communication systems using circular polarization shift keying (CPolSK) modulation was investigated. Additionally, models for the probability density distribution and scintillation index of the optical intensity under atmospheric turbulence were developed along with a bit error rate model for the optical communication system. The effects of the laser spatial coherence on these models were also analyzed. The results indicate that the optimal performance in the turbulent downlink is achieved with fully coherent light, where the GSM-beam-based CPolSK-modulated system demonstrates a reduction of 1.51 dB in the required power compared to that of an on–off keying system. The implications of this study suggest that optimizing spatial coherence could significantly enhance the reliability of space-to-ground communication systems under atmospheric disturbances. Full article

Optical Coherence Tomography (OCT) has revolutionized the diagnosis and management of retinal diseases, offering high-resolution, cross-sectional imaging that aids in early detection and continuous monitoring. However, traditional OCT devices are limited to clinical settings and require a technician to operate, which poses accessibility challenges such as a lack of appointment availability, patient and family burden of frequent transportation, and heightened healthcare costs, especially when treatable pathology is undetected. With the increasing global burden of retinal conditions such as age-related macular degeneration (AMD) and diabetic retinopathy, there is a critical need for improved accessibility in the detection of retinal diseases. Advances in biomedical engineering have led to innovations such as portable models, community-based systems, and artificial intelligence-enabled image analysis. The SightSync OCT is a community-based, technician-free device designed to enhance accessibility while ensuring secure data transfer and high-quality imaging (6 × 6 mm resolution, 80,000 A-scans/s). With its compact design and potential for remote interpretation, SightSync widens the possibility for community-based screening for vision-threatening retinal diseases. By integrating innovations in OCT imaging, the future of monitoring for retinal disease can be transformed to reduce barriers to care and improve patient outcomes. This article discusses the evolution of OCT technology, its role in the diagnosis and management of retinal diseases, and how novel engineering solutions like SightSync OCT are transforming accessibility in retinal imaging. Full article

The choice of constellations largely affects the performance of both wireless and optical communications. To address increasing capacity requirements, constellation shaping, especially for high-order modulations, is imperative in high-speed coherent communication systems. This paper, thus, proposes novel mutual information neural estimation (MINE)-based geometric, probabilistic, and joint constellation shaping schemes, i.e., the MINE-GCS, MINE-PCS, and MINE-JCS, to maximize mutual information (MI) via emerging deep learning (DL) techniques. Innovatively, we first introduce the MINE module to effectively estimate and maximize MI through backpropagation, without clear knowledge of the channel state information. Then, we train encoder and probability generator networks with different signal-to-noise ratios to optimize the distribution locations and probabilities of the points, respectively. Note that MINE transforms the precise MI calculation problem into a parameter optimization problem. Our MINE-based schemes only optimize the transmitter end, and avoid the computational and structural complexity in traditional shaping. All the designs were verified through simulations as having superior performance for MI, among which the MINE-JCS undoubtedly performed the best for additive white Gaussian noise, compared to the unshaped QAMs and even the end-to-end training and other DL-based joint shaping schemes. For example, the low-order 8-ary MINE-GCS could achieve an MI gain of about 0.1 bits/symbol compared to the unshaped Star-8QAM. It is worth emphasizing that our proposed schemes achieve a balance between implementation complexity and MI performance, and they are expected to be applied in various practical scenarios with different noise and fading levels in the future. Full article

Recent advancements in hybrid photonic integrated circuits (PICs) for wireless communications are reviewed, with a focus on innovations developed at Fraunhofer HHI. This work leverages hybrid integration technology, which combines indium phosphide (InP) active elements, silicon nitride (Si₃N₄) low-loss waveguides, and high-efficient thermal-optical tunable polymers with micro-optical functions to achieve fully integrated wireless transceivers. Key contributions include (1) On-chip optical injection locking for generating phase-locked optical beat notes at 45 GHz, enabled by cascaded InP phase modulators and hybrid InP/polymer tunable lasers with a 3.8 GHz locking range. (2) Waveguide-integrated THz emitters and receivers, featuring photoconductive antennas (PCAs) with a 22× improved photoresponse compared to top-illuminated designs, alongside scalable 1 × 4 PIN-PD and PCA arrays for enhanced power and directivity. (3) Beam steering at 300 GHz using a polymer-based optical phased array (OPA) integrated with an InP antenna array, achieving continuous steering across 20° and a 10.6 dB increase in output power. (4) Demonstration of fully integrated hybrid wireless transceiver PICs combining InP, Si₃N₄, and polymer material platforms, validated through key component characterization, on-chip optical frequency comb generation, and coherent beat note generation at 45 GHz. These advancements result in compact form factors, reduced power consumption, and enhanced scalability, positioning PICs as an enabling technology for future high-speed wireless networks. Full article

In this paper, we present recent advancements in transmitter and receiver technologies for Optical Wireless Communication (OWC). OWC offers very wide license-free optical spectrum which enables very high capacity transmission. Additionally, beam-steered OWC is more power-efficient and more secure due to low divergence of light. One of the main challenges of OWC is wide angle transmission and reception because law of conservation of etendue restricts maximization of both aperture and field of view (FoV). On the transmitter side, we use Micro Electro-Mechanical System cantilevers activated by piezoelectric actuators together with silicon micro-lenses for narrow laser beam steering. Such design allowed us to experimentally demonstrate at least 10 Gbps transmission over 100° full angle FoV. On the receiver side, we show the use of photodiode array, and Indium-Phosphide Membrane on Silicon (IMOS) Photonic Integrated Circuit (PIC) with surface grating coupler (SGC) and array of SGC. We demonstrate FoV greater than 32° and 16 Gbps reception with photodiode array. PIC receiver allowed to receive 100 Gbps WDM with single SGC, and 10 Gbps with an array of SGC which had 8° FoV in the vertical angle and full FoV in the horizontal angle. Our results suggest that solutions presented here are scalable in throughputs and can be adopted for future indoor high-capacity OWC systems. Full article

This work presents a cost-effective optical frequency comb generator (CEOFCG) solution for generating multiple, equally spaced carriers in wavelength-division-multiplexing coherent optical fiber communication systems (WDM-COFCS). It enables the replacement of multiple laser sources with a single continuous-wave laser, eliminating the need for additional amplification and filtering setups. The CEOFCG provides stable multicarrier spacing, broad phase coherence, and compatibility with advanced modulation formats, enhancing the performance of WDM-COFCS. Digital signal processing (DSP) techniques, including digital filtering, detection, and impairment compensation, contribute to high transmission and spectral efficiency (SE). The results demonstrate the potential of CEOFCG in achieving cost reduction, complexity reduction, high SE, and optimal utilization of optical fiber bandwidth, particularly in higher-order QAM-based COFCS. Full article

A platform for converting near-infrared (NIR) laser power modulation into the self-mixing (SM) signal of a quantum cascade laser (QCL) operating at terahertz (THz) frequencies is introduced. This approach is based on laser feedback interferometry (LFI) with a THz QCL using a metal-coated silicon nitride trampoline membrane resonator as both the external QCL laser cavity and the mechanical coupling element of the two-laser hybrid system. We show that the membrane response can be controlled with high precision and stability both in its dynamic (i.e., piezo-electrically actuated) and static state via photothermally induced NIR laser excitation. The responsivity to nanometric external cavity variations and robustness to optical feedback of the QCL LFI apparatus allows a highly sensitive and reliable transfer of the NIR power modulation into the QCL SM voltage, with a bandwidth limited by the thermal response time of the membrane resonator. Interestingly, a dual information conversion is possible thanks to the accurate thermal tuning of the membrane resonance frequency shift and displacement. Overall, the proposed apparatus can be exploited for the precise opto-mechanical control of QCL operation with advanced applications in LFI imaging and spectroscopy and in coherent optical communication. Full article