Search Results (82)

The discharge of textile wastewater (TWW) into the environment releases multiple toxic substances that pose a significant threat to aquatic life. Most studies evaluating wastewater treatment efficiency focus on the removal of parameters, such as chemical oxygen demand (COD), total organic carbon (TOC), dissolved organic carbon (DOC), biochemical oxygen demand (BOD), and colour. One of the processes that has presented high efficiencies in the treatment of TWW is the use of biochar (BC) as an adsorbing material. BC has shown a high ability to remove complex organic substances from water since it is able to decrease the content of COD, TOC, and DOC. However, the toxicity of treated effluents has not been widely studied. In this regard, it is essential to focus not only on the efficiency of treatments in removing organic matter but also on their ability to reduce WW toxicity. This research evaluates the acute toxicity of real TWW treated with Pinus patula BC by using Daphnia pulex as a sentinel species. For this purpose, D. pulex individuals were exposed to TWW and BC-treated TWW for 48 h, with mortality defined as the absence of movement in the limbs and antennas. It was found that although the treatment with P. patula BC for 120 min eliminated 72.8% of the initial DOC under optimal conditions (pH 3 and 13.5 g/L BC dose), the textile effluent remained toxic, inducing 85.7% and 71.4% mortality rates on D. pulex for 100% (v/v) and 50% (v/v) dilutions. Despite the increase in the survival rate of D. pulex individuals due to the protective effect achieved by the constituents contained in the reconstituted 50% (v/v) samples, these findings emphasize the necessity of conducting toxicity studies before considering the discharge of TWW effluents after having been treated. Full article

Background/objectives: Streptococcus agalactiae (or Group B Streptococcus, GBS) is a major cause of neonatal meningitis globally. There are 10 serotypes of GBS, which are distinguished by their capsular polysaccharide (CPS) structure, with serotypes Ia, Ib, II, III, IV and V responsible for up to 99% of infections. Currently, there are no licensed vaccines against GBS. The most developed candidates are glycoconjugate vaccines, which can be highly effective but are also expensive to produce by existing approaches and unaffordable for many parts of the world. Biosynthesis of recombinant glycans and glycoconjugates in tractable strains of bacteria offers a low-cost alternative approach to current chemical conjugation methods. Methods: In this study, we apply combinatorial hierarchical DNA assembly to the heterologous biosynthesis of GBS III, IV and V CPSs in E. coli. Each gene was removed from its native regulation, paired with synthetic regulatory elements and rebuilt from the bottom up to generate libraries of reconstituted pathways. These pathways were screened for glycan biosynthesis using serotype-specific antisera. Results: We identified several configurations that successfully biosynthesised the GBS CPSs. Furthermore, we exploited the conserved nature of the GBS CPS biosynthesis loci and the flexibility of modular DNA assembly by constructing hybrid pathways from a minimal pool of glycosyltransferase genes. We show that transferase genes with homologous function can be used interchangeably between pathways, obviating the need to clone a complete locus for each new CPS assembly. Conclusions: In conclusion, we report the first demonstration of heterologous GBS CPS IV and V biosynthesis in E. coli, a key milestone towards the development of low-cost recombinant multivalent GBS glycoconjugate vaccines. Full article

Lyophilization, or freeze-drying, is the default technique for the manufacture of solid-state formulations of therapeutic proteins. This established method offers several advantages, including improved product stability by minimizing chemical degradation, reduced storage requirements through water removal, and elimination of cold chain dependence. However, the lyophilization process itself presents limitations. It is a lengthy, batch-based operation, potentially leading to product inconsistencies and high manufacturing costs. Additionally, some proteins are susceptible to structural alterations during the freezing step, impacting their biological activity. This paper presents an alternative approach based on the co-precipitation of protein and excipients using an organic solvent. We explore the impact of various processing parameters on the viability of the formulation. We also provide an extensive characterization of proteins reconstituted from precipitated formulations and compare protein stability in solution and in lyophilized and precipitated solid formulations under long-term, accelerated, and stressed storage conditions. Full article

This study evaluated Maltodextrin (MD), Gum Arabic (GA), and Carboxymethylcellulose (CMC) in different ratios as coating materials to encapsulate citrus pomace phenolic compounds. Citrus encapsulates were obtained by ultrasound-assisted extraction followed by the freeze-drying process and were characterized regarding the microencapsulation efficiency, physical, and chemical properties. Carrier material choice reflected a significant effect on encapsulation efficiency, phenolic compounds retention, and reconstitution properties of encapsulated extract. The encapsulation efficiency of prepared encapsulates ranked from 50.909% to 84.000%, and it was strongly dependent upon CMC addition. A wide range of reconstitution parameters (water absorption index-WAI and water solubility index-WSI) suggested possible release mechanism modifications. HPLC analysis revealed the presence of three main phenolic compounds, namely Hesperidin, Naringin, and Rutin. A wall material mixture of MD, GA, and CMC in the same proportions was optimal for freeze-drying. This combination resulted in encapsulates with a low moisture content (1.936 ± 0.012%) and a low water activity (0.110 ± 0.001), indicating prolonged stability. Based on the obtained results, freeze-drying as an encapsulation technique should be considered as a promising solution to recover compounds from industry byproducts and protect them from environmental and gastrointestinal circumstances. Full article

Modern societies require increasingly large amounts of minerals and metals for their development. Therefore, huge amounts of waste must be stored in safe and cost-effective massive tailing storage facilities that would benefit from using tailings in sustainable geotechnical applications within the context of the circular economy. However, to consider tailings as assets, the long-term behaviour of these unconventional geomaterials under realistic environmental conditions must be assessed. This paper focuses on the effects of the environmental conditions on the behaviour of tailings from tungsten mining by experimentally determining their major physical and mechanical properties for three different conditions: twenty-months-aged undisturbed samples and reconstituted samples, with the latter being fresh and three months. The results confirm that twenty-months-aged undisturbed and fresh reconstituted tailings have significantly different mechanical behaviour, while three-months-aged reconstituted samples show an in-between behaviour as if the material regenerates and improved its behaviour with time due to physical and chemical processes. These ageing processes are experimentally confirmed by measuring the electrical conductivity in the samples. The results confirm that optimising the design of tailing storage facilities and using these geomaterials in sustainable geotechnical applications must consider the existing environmental conditions and the potential tailings’ mechanical changes due to ageing. Full article

Poly(L-lactic acid) (PLLA) and poly(D,L-lactic acid) (PDLLA) particles have been applied as dermal fillers for soft-tissue augmentation because they can induce foreign-body reactions, resulting in fibroblast proliferation and collagen formation. Although PLLA and PDLLA fillers are safe and biocompatible, clinical complications such as nodules and granulomas have been reported, possibly due to incomplete reconstitution. PDLLA particles were prepared via emulsification in this study, and three stirring speeds were investigated when adding PDLLA into carboxymethyl cellulose solution. The particle size, molecular weight of PDLLA, optical rotation, pH value, osmotic pressure, and reconstitution time were analyzed. A rabbit dorsal ear model was established to evaluate the soft-tissue augmentation of a commercial PDLLA filler. The results demonstrated that the stirring speed affected the particle size, but not other physical–chemical properties of the PDLLA particles. All the PDLLA particles were reconstituted in less than 7 min, which is faster than the process for the other commercial PDLLA dermal filler products. In addition, the PDLLA particles could induce inflammation and fibroblast proliferation. Although the PDLLA particles generated in this study have not yet been investigated in vivo, the results demonstrated here suggest their potential for application as dermal fillers. Full article

The high consumption of packaging has led to a massive production of waste, especially in the form of nonbiodegradable polymers that are difficult to recycle. Microbial cellulose is considered a biodegradable, low-cost, useful, ecologically correct polymer that may be joined with other biomaterials to obtain novel characteristics and can, therefore, be used as a raw material to produce packaging. Bagasse, a waste rich in plant cellulose, can be reprocessed and used to produce and reinforce other materials. Based on these concepts, the aim of the current research was to design sustainable packaging material composed of bacterial cellulose (BC) and sugarcane bagasse (SCB), employing an innovative shredding and reconstitution method able to avoid biomass waste. This method enabled creating a uniform structure with a 0.10-cm constant thickness, classified as having high grammage. The developed materials, particularly the 0.7 BC/0.3 SCB [70% (w/w) BC plus 30% (w/w) SCB] composite, had considerable tensile strength (up to 46.22 MPa), which was nearly thrice that of SCB alone (17.43 MPa). Additionally, the sorption index of the 0.7 BC/0.3 SCB composite (235.85 ± 31.29 s) was approximately 300-times higher than that of SCB (0.78 ± 0.09 s). The packaging material was also submitted to other analytical tests to determine its physical and chemical characteristics, which indicated that it has excellent flexibility and can be folded 100 times without tearing. Its surface was explored via scanning electron microscopy, which revealed the presence of fibers measuring 83.18 nm in diameter (BC). Greater adherence after the reconstitution process and even a uniform distribution of SCB fibers in the BC matrix were observed, resulting in greater tear resistance than SCB in its pure form. The results demonstrated that the composite formed by BC and SCB is promising as a raw material for sustainable packaging, due to its resistance and uniformity. Full article

Unraveling the multisymptomatic Gulf War Illness (GWI) pathology and finding an effective cure have eluded researchers for decades. The chronic symptom persistence and limitations for studying the etiologies in mouse models that differ significantly from those in humans pose challenges for drug discovery and finding effective therapeutic regimens. The GWI exposome differs significantly in the study cohorts, and the above makes it difficult to recreate a model closely resembling the GWI symptom pathology. We have used a double engraftment strategy for reconstituting a human immune system coupled with human microbiome transfer to create a humanized-mouse model for GWI. Using whole-genome shotgun sequencing and blood immune cytokine enzyme linked immunosorbent assay (ELISA), we show that our double humanized mice treated with Gulf War (GW) chemicals show significantly altered gut microbiomes, similar to those reported in a Veteran cohort of GWI. The results also showed similar cytokine profiles, such as increased levels of IL-1β, IL-6, and TNF R-1, in the double humanized model, as found previously in a human cohort. Further, a novel GWI Veteran fecal microbiota transfer was used to create a second alternative model that closely resembled the microbiome and immune-system-associated pathology of a GWI Veteran. A GWI Veteran microbiota transplant in humanized mice showed a human microbiome reconstitution and a systemic inflammatory pathology, as reflected by increases in interleukins 1β, 6, 8 (IL-1β, IL-6, IL-8), tumor necrosis factor receptor 1 (TNF R-1), and endotoxemia. In conclusion, though preliminary, we report a novel in vivo model with a human microbiome reconstitution and an engrafted human immune phenotype that may help to better understand gut–immune interactions in GWI. Full article

BTB and CNC homology 1 (BACH1) represses the expression of genes involved in the metabolism of iron, heme and reactive oxygen species. While BACH1 is rapidly degraded when it is bound to heme, it remains unclear how BACH1 degradation is regulated under other conditions. We found that FBXO22, a ubiquitin ligase previously reported to promote BACH1 degradation, polyubiquitinated BACH1 only in the presence of heme in a highly purified reconstitution assay. In parallel to this regulatory mechanism, TANK binding kinase 1 (TBK1), a protein kinase that activates innate immune response and regulates iron metabolism via ferritinophagy, was found to promote BACH1 degradation when overexpressed in 293T cells. While TBK1 phosphorylated BACH1 at multiple serine and threonine residues, BACH1 degradation was observed with not only the wild-type TBK1 but also catalytically impaired TBK1. The BACH1 degradation in response to catalytically impaired TBK1 was not dependent on FBXO22 but involved both autophagy-lysosome and ubiquitin-proteasome pathways judging from its suppression by using inhibitors of lysosome and proteasome. Chemical inhibition of TBK1 in hepatoma Hepa1 cells showed that TBK1 was not required for the heme-induced BACH1 degradation. Its inhibition in Namalwa B lymphoma cells increased endogenous BACH1 protein. These results suggest that TBK1 promotes BACH1 degradation in parallel to the FBXO22- and heme-dependent pathway, placing BACH1 as a downstream effector of TBK1 in iron metabolism or innate immune response. Full article

Liposomal amphotericin B (Ambisome^®) is the gold standard for the treatment and prevention of fungal infections both in the adult and pediatric populations. The lyophilized dosage form has to be reconstituted and diluted by hospital staff, but its management can be challenging due to the spontaneous tendency of amphotericin B to form aggregates with different biological activity. In this study, the colloidal stability of the liposomes and the chemical stability of amphotericin B were investigated over time at storage conditions. Three liposomal formulations of amphotericin B at 4.0 mg/mL, 2.0 mg/mL, and 0.2 mg/mL were prepared and assayed for changes regarding the dimensional distribution, zeta potential, drug aggregation state, and onset of by-products. Our analyses highlighted that the most diluted formulation, kept at room temperature, showed the greatest changes in the aggregation state of the drug and accordingly the highest cytotoxicity. These findings are clinically relevant since the lower dosages are addressed to the more vulnerable patients. Therefore, the centralization of the dilution of AmBisome^® at the pharmacy is of fundamental importance for assuring patient safety, and at the same time for reducing medication waste, as we demonstrated using the cost-saving analysis of drug expense per therapy carried out at the G. Gaslini children hospital. Full article

Organs-on-a-chip (OoCs) are microfluidic devices constituted by PDMS or hydrogel in which different layers of cells are separated by a semipermeable membrane. This technology can set many parameters, like fluid shear stress, chemical concentration gradient, tissue–organ interface, and cell interaction. The use of these devices in medical research permits the investigation of cell patterning, tissue–material interface, and organ–organ interaction, mimicking the complex structures and microenvironment of human and animal bodies. This technology allows us to reconstitute in vitro complex conditions that recapitulate in vivo environments. One of the main advantages of these systems is that they represent a very realistic model that, in many cases, can replace animal experimentation, eliminating costs and related ethical issues. Organ-on-a-chip can also contain bacteria or cancer cells. This technology could be beneficial in dentistry for testing novel antibacterial substances and biomaterials, performing studies on inflammatory disease, or planning preclinical studies. A significant number of publications and reviews have been published on this topic. Still, to our knowledge, they mainly focus on the materials used for fabrication and the different patterns of the chip applied to the experimentations. This review presents the most recent applications of organ-on-a-chip models in dentistry, starting from the reconstituted dental tissues to their clinical applications and future perspectives. Full article

Cannabigerol (CBG), a cannabinoid from Cannabis sativa L., recently attracted noteworthy attention for its dermatological applications, mainly due to its anti-inflammatory, antioxidant, and antimicrobial effectiveness similar to those of cannabidiol (CBD). In this work, based on results from studies of in vitro permeation through biomimetic membranes performed with CBG and CBD in the presence and in the absence of a randomly substituted methyl-β-cyclodextrin (MβCD), a new CBG extemporaneous emulgel (oil-in-gel emulsion) formulation was developed by spray-drying. The powder (SDE) can be easily reconstituted with purified water, leading to a product with chemical-physical and technological characteristics that are comparable to those of the starting emulgels (E). Thermogravimetric analysis (TGA), attenuated total reflection-Fourier transformed infrared spectroscopy (ATR-FTIR), x-ray powder diffraction (XRPD), and high-performance liquid chromatography (HPLC) analyses demonstrated that the spray-drying treatment did not alter the chemical properties of CBG. This product can represent a metered-dosage form for the localized treatment of cutaneous afflictions such as acne and psoriasis. Full article

Powdered foods are easy to store and transport, with a longer shelf life that minimizes potential waste, contributing to sustainable development. Each food category has a unique composition, responsible for its chemical and physical attributes, which directly influences the stability of powdered products. The drying method used is essential to obtain the desired characteristics of the powdered food, and the choice of each technology can provide unique morphological properties regarding size, shape, and density, among other factors. Furthermore, rehydration properties must also be investigated, as they play a fundamental role in the reconstitution of powdered foods, influencing the dispersion and dissolution of the powder in liquids. Therefore, this review provides a comprehensive overview of the powdered food manufacturing process and its advantages. Special attention is given to the desirable properties of food powders, challenges related to stability, powdered food reconstitution properties, and case studies regarding many powdered foods. Full article

Nucleosomes not only serve as the basic building blocks for eukaryotic chromatin but also regulate many biological processes, such as DNA replication, repair, and recombination. To modulate gene expression in vivo, the histone variant H2A.Z can be dynamically incorporated into the nucleosome. However, the assembly dynamics of H2A.Z-containing nucleosomes remain elusive. Here, we demonstrate that our previous chemical kinetic model for nucleosome assembly can be extended to H2A.Z-containing nucleosome assembly processes. The efficiency of H2A.Z-containing nucleosome assembly, like that of canonical nucleosome assembly, was also positively correlated with the total histone octamer concentration, reaction rate constant, and reaction time. We expanded the kinetic model to represent the competitive dynamics of H2A and H2A.Z in nucleosome assembly, thus providing a novel method through which to assess the competitive ability of histones to assemble nucleosomes. Based on this model, we confirmed that histone H2A has a higher competitive ability to assemble nucleosomes in vitro than histone H2A.Z. Our competitive kinetic model and experimental results also confirmed that in vitro H2A.Z-containing nucleosome assembly is governed by chemical kinetic principles. Full article

Salinity poses a persistent threat to agricultural land, continuously jeopardizing global food security. This study aimed to enhance sweet corn (SC) fitness under varying levels of salinity using indigenous biostimulants (BioS) and to assess their impacts on plant performance and soil quality. The experiment included control (0 mM NaCl), moderate stress (MS; 50 mM NaCl), and severe stress (SS; 100 mM NaCl) conditions. Indigenous biostimulants, including compost (C), Bacillus sp., Bacillus subtilis (R), and a consortium of arbuscular mycorrhizal fungi (A) were applied either individually or in combination. Growth traits, physiological and biochemical parameters in maize plants, and the physico–chemical properties of their associated soils were assessed. SS negatively affected plant growth and soil quality. The RC combination significantly improved plant growth under SS, increasing aerial (238%) and root (220%) dry weights compared to controls. This treatment reduced hydrogen peroxide by 54% and increased peroxidase activity by 46% compared to controls. The indigenous biostimulants, particularly C and R, enhanced soil structure and mineral composition (K and Mg). Soil organic carbon and available phosphorus increased notably in C-treated soils. Furthermore, RC (437%) and CAR (354%) treatments exhibited a significant increase in glomalin content under SS. Indigenous biostimulants offer a promising strategy to mitigate salinity-related threats to agricultural land. They improve plant fitness, fine-tune metabolism, and reduce oxidative stress. In addition, the biostimulants improved the soil structure and mineral composition, highlighting their potential for reconstitution and sustainability in salt-affected areas. This approach holds promise for addressing salinity-related threats to global food security. Full article