Search Results (523)

As a potential strategic resource of critical metals, deep-sea cobalt-rich crusts represent one of the most promising metal reservoirs within oceanic seamount systems, and their metallogenic mechanism constitutes a frontier topic in deep-sea geoscience research. This review focuses on the cobalt-rich crusts from the Magellan Seamount region in the northwestern Pacific and synthesizes existing geological, mineralogical, and geochemical studies to systematically elucidate their mineralization processes and metal enrichment mechanisms from a microstructural perspective, with particular emphasis on cobalt enrichment and its controlling factors. Based on published observations and experimental evidence, the formation of cobalt-rich crusts is divided into three stages: (1) Mn/Fe colloid formation—At the chemical interface between oxygen-rich bottom water and the oxygen minimum zone (OMZ), Mn²⁺ and Fe²⁺ are oxidized to form hydrated oxide colloids such as δ-MnO₂ and Fe(OH)₃. (2) Key metal adsorption—Colloidal particles adsorb metal ions such as Co²⁺, Ni²⁺, and Cu²⁺ through surface complexation and oxidation–substitution reactions, among which Co²⁺ is further oxidized to Co³⁺ and stably incorporated into MnO₆ octahedral vacancies. (3) Colloid deposition and mineralization—Mn–Fe colloids aggregate, dehydrate, and cement on the exposed seamount bedrock surface to form layered cobalt-rich crusts. This process is dominated by the Fe/Mn redox cycle, representing a continuous evolution from colloidal reactions to solid-phase mineral formation. Biological processes play a crucial catalytic role in the microstructural evolution of the crusts. Mn-oxidizing bacteria and extracellular polymeric substances (EPS) accelerate Mn oxidation, regulate mineral-oriented growth, and enhance particle cementation, thereby significantly improving the oxidation and adsorption efficiency of metal ions. Tectonic and paleoceanographic evolution, seamount topography, and the circulation of Antarctic Bottom Water jointly control the metallogenic environment and metal sources, while crystal defects, redox gradients, and biological activity collectively drive metal enrichment. This review establishes a conceptual framework of a multi-level metallogenic model linking macroscopic oceanic circulation and geological evolution with microscopic chemical and biological processes, providing a theoretical basis for the exploration, prediction, and sustainable development of potential cobalt-rich crust deposits. Full article

Microplastics (MPs) and nanoplastics (NPs) are widespread environmental contaminants with documented impacts on human health, particularly on the female reproductive system. Defined as polymeric fragments smaller than 5 mm, MPs (typically ranging from 1 µm to 5 mm) and NPs (smaller than 1 µm, often <100 nm) originate either from primary sources—intentionally manufactured for specific industrial applications—or from secondary sources through physical, chemical, or biological degradation of macroplastics. Human exposure occurs via multiple routes, including ingestion, inhalation, dermal absorption, and iatrogenic introduction, with growing evidence that these particles can accumulate in the ovaries, oocytes, and placental tissue. Experimental studies in rodents demonstrate that MPs and NPs induce oxidative stress, trigger inflammatory responses, and promote granulosa cell apoptosis, ultimately diminishing ovarian reserve and impairing folliculogenesis. Clinical and pilot human studies have confirmed the presence of MPs in placentas, umbilical cord blood, and meconium, indicating exposure from the earliest stages of development. Moreover, MPs and NPs may disrupt the hypothalamic–pituitary–ovarian axis, contributing to endocrine dysregulation and hormonal imbalance. Analytical methods such as Fourier-transform infrared spectroscopy, Raman spectroscopy, and scanning electron microscopy enable detection of these particles in biological samples, although methodological standardization remains insufficient. This paper summarizes current evidence on the exposure pathways, toxicological effects, and reproductive consequences of MPs and NPs in women. It further highlights existing research gaps and evaluates available analytical approaches to support future studies and develop strategies aimed at mitigating their detrimental impact on women’s reproductive health and fertility. Full article

Tea’s chemical composition is influenced by cultivar, harvest maturity, and growing environment; however, processing remains the dominant factor shaping final quality. Despite the diversity of Taiwanese native teas, systematic comparisons of functional components across multiple manufacturing stages remain limited. In this study, nine representative Taiwanese teas were evaluated at four key processing stages—green tea (G), enzymatic fermentation (oxidative fermentation, F), semi-finished tea prior to roasting (S), and completed tea (C)—to clarify how enzymatic oxidation, rolling, and roasting alter major bioactive constituents. Green-tea-stage samples exhibited clear cultivar-dependent profiles: large-leaf cultivars contained higher catechins and gallic acid, whereas bud-rich small-leaf teas showed elevated caffeine and amino acids, with amino acids further enhanced at higher elevations. Fermentation intensity governed the major chemical transitions, including catechin depletion, gallic acid formation, accumulation of early stage catechin-derived paired oxidative polymerization compounds (POPCs), and pronounced increases in theasinensins in heavily fermented teas. L-theanine decreased most markedly in teas subjected to prolonged withering. Roasting further reduced amino acids but had minimal influence on caffeine, while rolling effects varied by tea type. Overall, this study provides the first stage-resolved chemical map of Taiwanese native teas, offering practical insights for optimizing processing strategies to enhance functional phytochemical profiles. Full article

Naturally occurring bioactive compounds represent a promising option for cancer prevention and therapy due to their ability to modulate apoptosis, angiogenesis, inflammation, oxidative stress, and cell signaling. However, their clinical impact is limited by low bioavailability, chemical instability, rapid metabolism, and poor tumor microenvironment accumulation. Innovative delivery platforms, including lipid and polymeric nanoparticles, liposomes, micelles, nanoemulsions, hydrogels, and stimulus-responsive systems, have been developed to improve stability, absorption, tumor specificity, and therapeutic efficacy. This review integrates molecular mechanisms, preclinical and clinical evidence, and recent technological advances, highlighting both potential and limitations. Although several compounds show encouraging results in cell and animal models, only a small number have progressed to early clinical trials, where outcomes remain heterogeneous and often fail to replicate preclinical magnitudes. Regulatory barriers, a lack of formulation standardization, and the absence of predictive biomarkers persist. Sustainability is also addressed through the valorization of agrifood by-products and green extraction processes. This review provides an integrative framework linking molecular mechanisms, advanced delivery technologies, clinical translation, and sustainability, offering a broader perspective than conventional reviews. Future perspectives emphasize multicenter trials, comparative designs, and the development of regulatory guidelines for nanoformulated bioactive compounds. Full article

L. ferrooxidans and their metabolic products have been explored as viable flotation reagents of pyrite and chalcopyrite for froth flotation. Scanning electron microscopy (SEM), near edge X-ray absorption fine structure (NEXAFS) spectroscopy, time-of-flight secondary ion mass spectrometry (ToF-SIMS) and captive bubble contact angle measurements have been used to examine the surface physicochemical properties of pyrite upon exposure to L. ferrooxidans grown in HH medium at pH 1.8. C K-edge NEXAFS spectra, collected using scanning transmission X-ray microscopy (STXM), indicate hydrophilic lipids, fatty acids, and biopolymers are formed at the mineral–bacterium interface within hours of exposure. The Fe L-edge NEXAFS show oxidation of the mineral surface from Fe (II) sulfide to Fe (III) oxyhydroxides. The leaching of the iron species at the pyrite surface is accelerated in the presence of L. ferrooxidans and extracellular polymeric substances (EPS) as compared to HH medium controls, as shown by ToF-SIMS. The surface chemical changes induced by the interaction with L. ferrooxidans show a significant decrease in surface hydrophobicity within the first 2 h of exposure. The implications of these findings are the potential use of EPS, produced during early attachment of L. ferrooxidans, as a depressant for bioflotation or to enhance bioleaching. Full article

Melanin is the dark polymer pigment found in all kingdoms of life. Plant allomelanin, formed through the oxidation and polymerization of phenolic compounds, does not contain nitrogen; however, it possesses similar properties to melanin of animal, fungal, or bacterial origin. The black coloration of awns, spike husk edges, and even complete spikes is well-known in wheat and occurs frequently in wild, but rarely in cultivated, wheat species. Previously, anthocyanins were considered the only pigments responsible for the black coloration of wheat ears. Recently, it has been shown that the black coloration of the husks in other cereals can be attributed to melanin or anthocyanins, or both of these pigments. In this study, using standard procedures for chemical extraction of anthocyanins and melanin, ultraviolet–visible–near-infrared spectroscopy, and hyperspectral imaging, we examined the pigment in Persian wheat (Triticum carthlicum Line 5999) black-colored spikes and found that it exhibits properties characteristic of melanin rather than anthocyanins. Also, using microscopy, we show that the dark pigment in the husks and awns of mature spikes is located mainly in the dead protoplasts of epiderma and sub-epidermal sclerenchyma cells. The localization of the pigment suggests that melanin may perform some protective or sunlight-to-heat transforming function. Full article

This study compares the chemical modification and polymerization behavior of canola, carinata, and crambe oils to evaluate their suitability as renewable building blocks for polymer synthesis. The vegetable oils were characterized in terms of fatty-acid composition and oxidative stability, and the data showed distinct profiles: canola with 0% erucic acid, carinata around 42.08%, and crambe reaching 56.25%, differences that end up influencing how each one responds during the modification steps. Epoxidation and acrylation were confirmed by ¹H NMR, ¹³C NMR, and FTIR-ATR, mainly through the disappearance of the olefinic peaks and the appearance of oxirane- and acrylate-related signals (some of them quite clear, others less pronounced). After acrylation, the oils were subjected to solution polymerization, forming bulk crosslinked materials, whose properties reflected their original fatty-acid profiles: the canola-based polymer reached the highest glass transition temperature (T_g), 47.73 °C, followed by the carinata-based polymer (T_g = 41.86 °C), while the crambe-derived polymer, with lower functionality due to its high erucic acid content, showed a much lower T_g of 20.26 °C. Altogether, these differences highlight how variations in fatty-acid composition subtly shape the efficiency of functionalization and the architecture of the resulting networks. The polymers obtained here point to potential uses in renewable coatings, thermoset resins, and other applications that depend on bio-based crosslinked materials. Full article

The current research presents the synthesis, characterization, and application of a novel gas sensor based on polypyrrole/strontium titanate (PPy/STO) nanocomposites for the selective detection of CO₂. Utilizing chemical oxidative polymerization, PPy and PPy/STO nanocomposites with varying STO (10–50) wt.% were synthesized and characterized. The structural and morphological analysis confirms the formation of spherical structure and well-dispersed PPy nanoparticles with increasing crystallinity and interaction of STO in PPy chain particle compactness as the STO content increases. The integration of perovskite STO within the conducting polymer matrix enhances the electronic structure, porosity, and surface area of the composite, promoting improved gas sensing performance. Electrical impedance spectroscopy reveals that the composites exhibit a frequency-dependent dielectric response and conduction attributed to charge carrier mobility and interfacial polarization effects. PPy/STO 20% exhibits highest conductivity and dielectric constants of 0.03604 Scm⁻¹ and 1.074 × 10⁴, respectively. Real-time CO₂ sensing experiments conducted at 50 °C demonstrate good sensitivity, stability, and rapid response/recovery characteristics, particularly for the PPy/STO 10% and 40% composites. These findings highlight the potential of PPy/STO nanocomposites as flexible, lightweight, and efficient materials for portable CO₂ gas sensors, addressing the growing needs for environmental and health monitoring. Full article

Aflatoxins remain among the most challenging food contaminants to monitor due to their structural diversity, low abundance, and the chemical complexity of cereal- and nut-based matrices. In this study, a multifunctional Cu/β-cyclodextrin@carboxylated graphene oxide (Cu/β-CD@CGO) nanocomposite was synthesized through a green, two-step procedure and employed as a high-affinity nanosorbent for trace extraction of AFB₁, AFB₂, AFG₁, and AFG₂. The architecture integrates three complementary components: β-cyclodextrin for inclusion-driven molecular recognition, copper nanoparticles that establish coordination interactions with lactone-bearing aflatoxins, and CGO nanosheets that supply extensive π-rich surfaces and abundant carboxyl functionalities. Comprehensive characterization (FTIR, Raman, XPS, SEM, EDX-mapping, and HRTEM) confirmed the formation of a uniform, porous hybrid network. Under optimized d-SPE conditions, the nanocomposite enabled quantitative recovery (92.0–108.5%) of aflatoxins from pistachio, maize, and rice extracts while achieving sub-ng kg⁻¹ detection limits and excellent reproducibility. The results demonstrate that the Cu/β-CD@CGO platform provides a robust, selective, and sustainable alternative to conventional immunoaffinity or polymeric sorbents, offering strong potential for routine surveillance of aflatoxins in complex food systems. Full article

Nanotechnology offers powerful new tools to enhance food quality monitoring and safety assurance. In the food industry, nanoscale materials (e.g., metal, metal oxide, carbon, and polymeric nanomaterials) are being integrated into sensory systems to detect spoilage, contamination, and intentional food tampering with unprecedented sensitivity. Nanosensors can rapidly identify foodborne pathogens, toxins, and chemical changes that signal spoilage, overcoming the limitations of conventional assays that are often slow, costly, or require expert operation. These advances translate into improved food safety and extended shelf-life by allowing early intervention (for example, via antimicrobial nano-coatings) to prevent spoilage. This review provides a comprehensive overview of the types of nanomaterials used in food sensory applications and their mechanisms of action. We examine current applications in detecting food spoilage indicators and adulterants, as well as recent innovations in smart packaging and continuous freshness monitoring. The advantages of nanomaterials—including heightened analytical sensitivity, specificity, and the ability to combine sensing with active preservative functions—are highlighted alongside important toxicological and regulatory considerations. Overall, nanomaterials are driving the development of smarter food packaging and sensor systems that promise safer foods, reduced waste, and empowered consumers. However, realizing this potential will require addressing safety concerns and establishing clear regulations to ensure responsible deployment of nano-enabled food sensing technologies. Representative figures of merit include Au/AgNP melamine tests with LOD 0.04–0.07 mg L⁻¹ and minute-scale readout, a smartphone Au@carbon-QD assay with LOD 3.6 nM, Fe₃O₄/DPV detection of Sudan I at 0.001 µM (linear 0.01–20 µM), and a reusable Au–Fe₃O₄ piezo-electrochemical immunosensor for aflatoxin B1 with LOD 0.07 ng mL⁻¹ (≈15 × reuse), alongside freshness labels that track TVB-N/amine in near-real time and e-nose arrays distinguishing spoilage stages. Full article

Photo(electro)-catalysis has increasingly attracted attention from researchers due to its wide applications in green chemical transformation, including organic synthesis and environmental remediation. As a promising candidate, the n-type semiconductor WO₃ possesses a suitable bandgap (~2.6 eV), good visible-light response, high chemical stability, and multi-electron transfer capability, thus endowing it with enormous potential in heterogeneous photocatalysis (PC) and photoelectrocatalysis (PEC) to address environment and energy issues. In this review, the recent research progress of WO₃-based photo(electro)-catalysts is examined and systematically summarized with regard to construction strategies and various application scenarios. To start with, the research background, functionalization methods and possible reaction mechanisms for WO₃ are introduced in depth. Key influencing factors, including light absorption capacity, charge carrier separation, and reusability, are also analyzed. Then, diverse applications of WO₃ for the elimination of organic pollutants (e.g., persistent organic pollutants and polymeric wastes) and green organic synthesis (i.e., oxidation, reduction, and other reactions) are intentionally discussed to underscore their vast potential in photo(electro)-catalytic performance. Finally, future challenges and insightful perspectives are proposed to explore effective WO₃-based materials. This comprehensive review aims to offer profound insights into innovative exploration of high-performance WO₃ semiconductor catalysts and guide new researchers in this field to better understand their vital roles in green organic synthesis and hazardous pollutants removal. Full article

The remarkable growth of high-frequency electronic systems has raised concerns about electromagnetic interference (EMI), emphasizing the need for lightweight and efficient shielding materials. In this study, ternary composites based on polypyrrole (PPy), graphene oxide (GO), and silver nanowires (AgNWs) were synthesized through chemical oxidative polymerization of pyrrole monomer and embedded into polycaprolactone (PCL) matrices to create flexible films. Structural and morphological analyses confirmed the successful incorporation of all components, with scanning electron microscopy showing granular PPy, sheet-like GO, and fibrous AgNWs, while spectroscopic studies indicated strong interfacial interactions without damaging the PPy backbone. Thermomechanical analysis revealed that GO increased stiffness and defined the glass transition, whereas AgNWs improved toughness and energy dissipation; their combined use resulted in balanced properties. EMI shielding effectiveness (SE) was tested in the X-band (8–12 GHz). Pure PPy exhibited poor shielding ability, while the addition of GO and AgNWs significantly enhanced performance. The highest EMI SE values were observed in PPy/GO–AgNWs composites, with an average SE of 16.05 dB at 20 wt% of the composite in the PCL matrix, equivalent to about 84.4% attenuation of incident waves. These results demonstrate that the synergistic integration of GO and AgNWs into PPy matrices enables the creation of lightweight, flexible films with advanced EMI shielding properties, showing great potential for next-generation electronic and aerospace applications. Full article

Asphalt is a widely used polymeric material in pavement engineering. However, it is easily affected by heat and ultraviolet rays, which accelerate its molecular degradation and physicochemical aging, thereby limiting its service life. To improve the anti-aging properties of asphalt, three types of nano-zinc oxide (ZnO)-modified asphalt were prepared. The chemo-rheological behavior, structural evolution of polymeric components, molecular weight distribution, and nanoscale morphology of nano-ZnO-modified asphalt were studied via dynamic shear rheometry (DSR), Fourier transform infrared spectrometry (FTIR), gel permeation chromatography (GPC) and atomic force microscopy (AFM), and the aging resistance of nano-ZnO-modified asphalt was quantitatively analyzed using the rutting factor index, functional group index, molecular size ratio, and nanoscale parameters. The findings indicate that nano-ZnO enhances the high-temperature rheological properties of asphalt and delays the increase in the rutting factor of aged asphalt. Nano-ZnO is dispersed in the asphalt matrix in the form of a physical mixture without inducing new chemical bonds, and can reduce the nanoscale roughness of asphalt. After aging, the nanoscale roughness and the aspect ratio of the bee structure decreased, and the bee structure area increased. According to the changes in the functional group index and the proportions of molecular sizes in the asphalt, it was found that nano-ZnO can significantly improve asphalt’s aging resistance. The results of this study provide insights into the nanoscale modification and structure–property relationships of polymeric asphalt binders, providing a reference for the design and application of functional polymer nanocomposite systems with improved durability. Full article

The recovery of copper from metallurgical effluents is critical for advancing sustainable mining and circular economy practices. This study evaluated a hybrid process combining copper sulfide precipitation with clarification using polymeric polyvinylidene fluoride (PVDF) microfiltration membranes. Laboratory-scale experiments were performed under controlled cyanide conditions (100 mg/L free CN⁻, 1800 mg/L Cu²⁺), focusing on permeate flux behavior, fouling mechanisms, and cleaning strategies. Optimal performance was achieved at moderate transmembrane pressures (<2.0 bar) and higher flow rates, which provided a balance between productivity and fouling control. Flux decline was attributed to a combination of pore blocking and cake layer formation, confirming the multifactorial nature of fouling dynamics. Cleaning tests revealed that oxidizing solutions (HCl + H₂O₂) restored up to 96% of the initial permeability, while combined treatments with NaCN achieved complete recovery (>100%), albeit with potential risks of membrane aging under prolonged exposure. A techno-economic assessment comparing polymeric and ceramic membranes revealed similar capital and operational costs, with polymeric membranes offering slight reductions in CAPEX (10%) and OPEX (2.3%). Overall, the findings demonstrate the technical feasibility and economic competitiveness of polymeric membranes for copper sulfide clarification, while emphasizing the need to improve long-term chemical resistance to ensure reliable industrial-scale implementation. Full article

Binary metallic nickel–copper nanocatalysts were anchored onto a polyvinylidene fluoride-co-hexafluoropropylene membrane [NiCu/PVdF–HFP] using the electrospinning technique, followed by the chemical reduction of the relevant precursor salts by introducing sodium borohydride to the synthesis mixture. A series of varied Ni:Cu weight % proportions was developed in order to optimize the electroactivity of this binary nanocomposite towards the investigated oxidation process. A number of physicochemical tools were used to ascertain the morphology and chemical structure of the formed metallic species on polymeric films. Cyclic voltammetric studies revealed a satisfactory performance of altered NiCu/PVdF–HFP membranes in alkaline solution. Ethylene glycol molecules were successfully electro-oxidized at their surfaces, showing the highest current intensity [564.88 μA cm⁻²] at the one with Ni:Cu weight ratios of 5:5. The dependence of these metallic membranes’ behavior on the added alcohol concentration to the reaction electrolyte and the adjusted scan rate during the electrochemical measurement was carefully investigated. One hundred repeated scans did not significantly deteriorate the NiCu/PVdF–HFP nanostructures’ durability. Decay percentages of 76.90–87.95% were monitored at their surfaces, supporting the stabilized performance for prolonged periods. A much-decreased R_ct value was estimated at Ni₅Cu₅/PVdF–HFP [392.6 Ohm cm²] as a consequence of the feasibility of the electron transfer step for the electro-catalyzing oxidation process of alcohol molecules. These enhanced study results will hopefully motivate the interested workers to explore the behavior of many binary and ternary combinations of metallic nanomaterials after their deposition onto convenient polymeric films for vital electrochemical reactions. Full article