Search Results (32)

The eastern Tianshan region in the Central Asian Orogenic Belt (CAOB) is characterized by multiple complex tectonic activity of uncertain historical contribution to the construction of the CAOB. This study utilizes a multi-proxy geochemical approach to characterize I-type monzogranite pluton rocks and their associated hornblende-rich dioritic enclaves to decipher the tectonic and magmatic evolution of the Xigebi area, eastern Tianshan. Zircon geochronology indicates a Triassic and Permian crystallization age of ca. 224.2 ± 1.7 Ma and ca. 268.3 ± 3.0 Ma for the host monzogranites and the dioritic enclaves, respectively. Major, trace and rare earth element distribution, together with Hf isotope systematics displaying noticeable positive εHf(t) anomalies for both rock types, point to partial melting of meta-mafic rocks in an intraplate extensional setting. The diorite was formed by the melting of lower crustal meta-igneous rocks mixed with mantle melts, and the monzogranite, predominantly from deep crustal meta-basalts contaminated by shallow metasedimentary rocks, with some degree of mixing with deeply sourced mantle magma. While both the host monzogranites and their dioritic enclaves are the products of upwelling magma, the younger Triassic monzogranites captured and preserved fragments of the dioritic Permian lower continental crust during crystallization. These multiple stages of magmatic underplating and crustal reworking associated with vertical stratification of the juvenile paleo-continental crust suggest the monzogranites and diorites indicate a change from a post-collisional setting to a regional intraplate regime on the southern margin of the CAOB. Full article

The Central Asian Orogenic Belt (CAOB) represents a crucial area for understanding the tectonic evolution of the Paleo-Asian Ocean and surrounding orogenic systems. This study investigates the petrology, geochronology, and geochemistry of volcanic and clastic rocks from Well HFD3 in the northern Songliao Basin, which provides key insights into the tectonic development of this region. Zircon U–Pb dating of tuff samples from the Linxi Formation provides an accurate age of 251.1 ± 1.1 Ma, corresponding to the late Permian. Geochemical analyses show that the clastic rocks are rich in SiO₂ (63.5%) and Al₂O₃ (13.7%), with lower K₂O/Na₂O ratios (0.01–1.55), suggesting low compositional maturity. Additionally, the trace element data reveal enrichment in light rare earth elements (LREEs) and depletion in Nb, Sr, and Ta, with a negative Eu anomaly, which indicates a felsic volcanic arc origin. The Chemical Index of Alteration (CIA) values (53.2–65.8) reflect weak chemical weathering, consistent with cold and dry paleo-climatic conditions. These findings suggest that the Linxi Formation clastic rocks are derived from felsic volcanic arcs in an active continental margin environment, linked to the subduction of the Paleo-Asian Ocean slab. The sedimentary conditions reflect a gradual transition from brackish to freshwater environments, corresponding with the final stages of subduction or the onset of orogeny. Full article

The Permian–Triassic magmatic record in the eastern Central Asian Orogenic Belt (CAOB) provides critical insights into the terminal stages of the Paleo-Asian Ocean (PAO) evolution, including collisional and post-collisional processes following its Late Permian closure. The northeastern China region, tectonically situated within the eastern segment of the CAOB, is traditionally known as the Xingmeng Orogenic Belt (XOR). This study integrates zircon U-Pb geochronology, whole-rock geochemistry, and zircon Hf isotopic analyses of intermediate-acid volcanic rocks and intrusive rocks from the former “Tongjiatun Formation” in the Faku area of northern Liaoning. The main objective is to explore the petrogenesis of these igneous rocks and their implications for the regional tectonic setting. Zircon U-Pb ages of these rocks range from 260.5 to 230.1 Ma, indicating Permian–Triassic magmatism. Specifically, the Gongzhuling rhyolite (260.5 ± 2.2 Ma) and Gongzhuling dacite (260.3 ± 2.4 Ma) formed during the Middle-Late Permian (270–256 Ma); the Wangjiadian dacite (243 ± 3.0 Ma) and Wafangxi rhyolite (243.9 ± 3.0 Ma) were formed in the late Permian-early Middle Triassic (256–242 Ma); the Haoguantun rhyolite (240.9 ± 2.2 Ma) and Sheshangou pluton (230.1 ± 1.7 Ma) were formed during the Late Middle-Late Triassic (241–215 Ma). Geochemical studies, integrated with the geochronological results, reveal distinct tectonic settings during successive stages: (1) Middle-Late Permian (270–256 Ma): Magmatism included peraluminous A-type rhyolite with in calc-alkaline series (e.g., Gongzhuling) formed in an extensional environment linked to a mantle plume, alongside metaluminous, calc-alkaline I-type dacite (e.g., Gongzhuling) associated with the subduction of the PAO plate. (2) Late Permian-Early Middle Triassic (256–242 Ma): Calc-alkaline I-type magmatism dominated, represented by dacite (e.g., Wangjiadian) and rhyolite (e.g., Wafangxi), indicative of a collisional uplift environment. (3) Late Middle-Late Triassic (241–215 Ma): Magmatism transitioned to high-K calc-alkaline with A-type rocks affinities, including rhyolite (e.g., Haoguantun) and plutons (e.g., Sheshangou), formed in a post-collisional extensional environment. This study suggests that the closure of the PAO along the northern margin of the North China Craton (NCC) occurred before the Late Triassic. Late Triassic magmatic rocks in this region record a post-orogenic extensional setting, reflecting tectonic processes following NCC-XOR collision rather than PAO subduction. Combined with previously reported age data, the tectonic evolution of the eastern segment of the CAOB during the Permian-Triassic can be divided into four stages: active continental margin (293–274 Ma), plate disintegration (270–256 Ma), final collision and closure (256–241 Ma), and post-orogenic extension (241–215 Ma). Full article

The Southern Beishan Orogenic Belt (SBOB), an integral part of the Southern Central Asian Orogenic Belt (CAOB), is characterized by extensive Late Paleozoic magmatism. These igneous rocks are the key to studying the tectonic evolution process and the ocean–continent tectonic transformation in the southern margin of the CAOB and Paleo-Asian Ocean. We present zircon U-Pb chronology, in situ Lu-Hf isotopes, and whole-rock geochemistry data for Early–Middle Devonian volcanic rocks in the Sangejing Formation and granites from the Shuangyingshan-Huaniushan (SH) unit in the SBOB. The Wudaomingshiu volcanic rocks (Ca. 411.5 Ma) are calc-alkaline basalt-basaltic andesites with low SiO₂ (47.35~55.59 wt.%) and high TiO₂ (1.46~4.16 wt.%) contents, and are enriched in LREEs and LILEs (e.g., Rb, Ba, and Th), depleted in HREEs and HFSEs (Nb, Ta, and Ti), and weakly enriched in Zr-Hf. These mafic rocks are derived from the partial melting of the depleted lithosphere metasomatized by subduction fluid and contaminated by the lower crust. Wudaomingshui’s high-K calc-alkaline I-type granite has a crystallization age of 383.6 ± 2.2 Ma (MSWD = 0.11, n = 13), high Na₂O (3.46~3.96 wt.%) and MgO (1.25~1.68 wt.%) contents, and a high DI differentiation index (70.69~80.45); it is enriched in LREEs and LILEs (e.g., Rb, Ba, and Th) and depleted in HREEs and HFSEs (e.g., Nb, Ta, and Ti). Granites have variable zircon ε_Hf(t) values (−2.5~3.3) with Mesoproterozoic T_DM2 ages (1310~1013 Ma) and originated from lower crustal melting with mantle inputs and minor upper crustal assimilation. An integrated analysis of magmatic suites in the SBOB, including rock assemblages, geochemical signatures, and zircon ε_Hf(t) values (−2.5 to +3.3), revealed a tectonic transition from advancing to retreating subduction during the Early–Middle Devonian. Full article

The Chinese Altay is located in the western segment of the Central Asian Orogenic Belt (CAOB) and preserves critical records of the Paleo-Asian Ocean (PAO) Plate evolution during the Paleozoic era. This region also hosts significant mineral deposits, making it a focal point for geological research. In this paper, field investigation, petrology, mineralogy, and petrography studies were conducted on volcanic rocks in the Fuyun–Qinghe area, southern margin of the Chinese Altay, and the paper provided new zircon LA-ICP-MS dating data, Lu-Hf isotope data, and whole-rock geochemical data of the basaltic to andesitic volcanic rocks. Thus, the formation age, petrogenesis, and tectonic setting of these rocks were discussed, which was of great significance to reveal the nature of the PAO Plate. The findings showed that the basaltic andesitic volcanic breccia was formed at 382.9 ± 3.4 Ma, the basalt was 401.7 ± 4.7 Ma, and the andesites were 405.1 ± 5.6 Ma and 404.8 ± 6.7 Ma, which indicated that the above rocks were formed in the Early–Middle Devonian. The volcanic rock assemblages were hawaiite, mugearite, potassic trachybasalt, basaltic andesite, andesite, benmoreite, etc., which contained labeled magmatic rocks such as adakite, sub-boninite, niobium-enriched arc basalt (NEAB), picrite, high-magnesium andesite (HMA), and magnesium andesite (MA). Comprehensive analysis indicated that magma probably mainly originated from three sources: (1) partial melting of the PAO slab, (2) partial melting of the overlying garnet–spinel lherzolite mantle peridotite metasomatized by subducting-related fluids (melts), and (3) a possible input of the asthenosphere. Comparative analysis with modern analogs (e.g., Chile Triple Junction) indicates that ridge subduction of the PAO had existed in the Fuyun–Qinghe area during the Early–Middle Devonian. Based on available evidence, we tentatively named the oceanic plates in this region the central Fuyun–Qinghe Ridge and the Junggar Ocean Plates, separated by the ridge on both sides. Although the ocean had a certain scale, it had entered the climax period of transition from ocean to continent. Full article

The Western Junggar Orogen (Xinjiang) is featured by widespread granite intrusions and substantial Au-Cu-Mo resources, making it an ideal site to study granitoids and their metallogenic link. Here, we first conducted geological surveys and analyses with ASD spectrometry, polarized light microscopy (PLM), and X-Ray diffraction (XRD) to determine the granitoid lithology. Then, we used spectral and remote sensing data statistics and rock textural features to select band combinations from ASTER and Landsat 8 OLI VNIR-SWIR data. Three band combinations, i.e., spectral absorption bands + T1, SWIR + T1, and VNIR-SWIR + T1, serve as the input layers for convolutional neural networks (AlexNet, VGG16, and GoogLeNet). They are used for remote sensing identification of granitoid lithology and the assessment of its accuracy. The results highlight the AlexNet model’s superior performance, as evidenced by the highest weighted F1 score (91.98%) and kappa coefficient (0.84) with ASTER VNIR-SWIR + T1 as the input layers. We suggest that the AlexNet model can best identify the granitoid subtypes (with ASTER images) in the Western Junggar. In contrast, Landsat 8 OLI images performed poorly, possibly because they have only two SWIR bands. We offer detailed spatial distribution characteristics of granite subtypes and provide remote sensing exploration methods for studying polymetallic ore belts in the Central Asian Orogenic Belt (CAOB). Full article

The early Permian mafic–ultramafic intrusion-related Cu-Ni mineralization in Northern Tianshan offers valuable insights into the nature of the mantle beneath the Central Asian Orogenic Belt (CAOB) and enhances the understanding of magmatic sulfide mineralization processes in orogenic environments. The Yunhai intrusion, rich in Cu-Ni sulfides, marks a significant advancement for Cu-Ni exploration in the covered regions of the western Jueluotag orogenic belt in Northern Tianshan. This intrusion is well-differentiated, featuring a lithological assemblage of olivine pyroxenite, hornblende pyroxenite, gabbro, and diorite, and contains about 50 kilotons of sulfides with average grades of 0.44 wt% Ni and 0.62 wt% Cu. Sulfide mineralization occurs predominantly as concordant layers or lenses of sparsely and densely disseminated sulfides within the olivine pyroxenite and hornblende pyroxenite. In situ zircon U-Pb dating for the Yunhai intrusion indicates crystallization ages between 288 ± 1 and 284 ± 1 Ma, aligning with several Cu-Ni mineralization-associated mafic–ultramafic intrusions in Northern Tianshan. Samples from the Yunhai intrusion exhibit enrichment in light rare earth elements (LREE), distinct negative Nb and Ta anomalies, positive ε_Nd(t) values ranging from 2.75 to 6.56, low initial (⁸⁷Sr/⁸⁶Sr)_i ratios between 0.7034 and 0.7053, and positive ε_Hf(t) values from 9.27 to 15.9. These characteristics, coupled with low Ce/Pb (0.77–6.55) and Nb/U (5.47–12.0) ratios and high Ti/Zr values (38.7–102), suggest very restricted amounts (ca. 5%) of crustal assimilation. The high Rb/Y (0.35–4.27) and Th/Zr (0.01–0.03) ratios and low Sm/Yb (1.47–2.32) and La/Yb (3.10–7.52) ratios imply that the primary magma of the Yunhai intrusion likely originated from 2%–10% partial melting of weak slab fluids–metasomatized subcontinental lithospheric mantle (peridotite with 2% spinel and/or 1% garnet) in a post-collisional environment. The ΣPGE levels in the Yunhai rocks and sulfide-bearing ores range from 0.50 to 54.4 ppb, which are lower compared to PGE-undepleted Ni-Cu sulfide deposits. This PGE depletion in the Yunhai intrusion’s parental magma may have been caused by early sulfide segregation from the primary magma at depth due to the high Cu/Pd ratios (43.5 × 10³ to 2353 × 10³) of all samples. The fractional crystallization of minerals such as olivine and pyroxene might be a critical factor in provoking significant sulfide segregation at shallower levels, leading to the extensive disseminated Cu-Ni mineralization at Yunhai. These characteristics are similar to those of typical deposits in the eastern section of the Jueluotage orogenic belt (JLOB), which may indicate that the western and eastern sections of the belt have the same ore-forming potential. Full article

The Xing’an–Mongolia Orogenic Belt (XMOB) is located in the eastern part of the Central Asian Orogenic Belt (CAOB). The region’s notable tectonic complexity and extensive tungsten mineralization offer a unique opportunity to explore metallogeny mechanisms in orogenic areas. This study focuses on the Shamai tungsten deposit as a case study, presenting results from LA–ICP–MS U–Pb dating of fine-grained, medium-grained, and porphyritic biotite monzogranite samples from the deposit, along with in situ zircon Hf isotopic and plagioclase Pb isotopic analyses. The fine-grained, medium-grained, and porphyritic biotite monzogranite were emplaced at 142.5, 141.9, and 140.2 Ma, respectively. These samples contain zircons with εHf(t) values ranging from 3.2 to 7.9 and 4.2 to 7.6, respectively, yielding T_DM2 model ages from 996 to 692 Ma and 923 to 708 Ma. These findings suggest that the magmas in the Shamai deposit were produced by partial melting of juvenile crustal material mixed with mantle-derived components. The tungsten mineralization periods in the Eastern XMOB region can be divided into three stages: Early Paleozoic (ca. 520–475 Ma), Triassic (ca. 250–200 Ma), and Jurassic to Early Cretaceous (ca. 190–130 Ma). The highest concentration of tungsten mineralization in the XMOB occurs within the Xing’an Block during the Jurassic to Early Cretaceous period. Yanshanian magmatism and the most significant tungsten metallogenic events are likely influenced by an extensional setting and oceanic slab rollback, shaped by the tectonic evolution of the Mongol-Okhotsk Ocean and the Paleo-Pacific Ocean. Full article

The Solonker-Xar Moron-Changchun-Yanji Suture Zone is the result of the final closure of the Paleo-Asian Ocean (PAO). However, the closure time of the PAO in Northeast China remains controversial. The Hunchun area is located in the easternmost part of the Solonker-Xar Moron-Changchun-Yanji Suture Zone. Tectonism and magmatism in the Hunchun area can provide important information for understanding the late-stage evolution of the PAO. In this study, our zircon U-Pb ages show that the granodiorites and diorites in the Hunchun were formed at 282.3–251.4 Ma. This geochronological evidence suggests prolonged Permian magmatism in the Hunchun area. Whole-rock geochemistry, zircon trace, and Lu-Hf isotope data show that all the intrusive rocks are mainly calc-alkaline series to arc tholeiite series. Granodiorites are I-type granites formed by the partial melting of juvenile lower crust derived from the mantle. Diorites show similar characteristics to the sanukitic high-Mg diorite and are formed by the partial melting of the depleted mantle metasomatized by subduction sediments and/or slab-derived fluids. These results indicate that the Permian diorites and granodiorites in the Hunchun area formed in an active continental margin setting related to the subduction of the PAO plate. Significantly, sudden changes in the whole-rock Sr/Y and (La/Yb)_N ratios and zircon ε_Hf(t) values are observed in the Late Permian-Early Triassic igneous rocks in the eastern Central Asian Orogenic Belt (CAOB). This indicates that the final closure of the PAO in Northeast China likely occurred in the Late Permian-Early Triassic. Full article

The Sanhetun tellurium–gold (Te–Au) deposit, located in the Duobaoshan polymetallic metallogenic belt (DPMB) within the eastern section of the Central Asian Orogenic Belt (CAOB), is a newly discovered small-scale gold deposit. The mineralization, with a resource of ≥4 t Au, is mainly hosted in three NNE-trending alteration zones between Early Carboniferous granitic mylonite and Lower Cretaceous volcanogenic-sedimentary formations. The genesis of formation of this deposit is poorly constrained. Here, we report the results of petrographic studies, TESCAN Integrated Mineral Analyzer (TIMA), major and trace element concentrations, and in situ S isotopes of pyrite. The results show that there are four types of pyrite: coarse-grained euhedral Py1, fine-grained quartz-Py2 vein crosscutting Py1, anhedral aggregated Py3, and anhedral aggregated Py4. The pre-ore stage Py1 contains negligible Au, Te, and other trace elements and has a relatively narrow range of δ³⁴S values ranging from −1.20 to −0.57‰. Py2 has higher concentrations of Au and Te and distinctly high concentrations of Mo, Sb, Zn, and Mn with markedly positive δ³⁴S values of 4.67 to 14.43‰. The main-ore stage Py3 contains high Au and Te concentrations and shows narrow δ³⁴S values ranging from −5.69 to 0.19‰. The post-ore stage Py4 displays low Au concentrations with the δ³⁴S values ranging from 2.66 to 3.86‰. Tellurides are widespread in Py3 and Py4, consisting mainly of native tellurium, tetradymite, tsumoite, hessite, and petzite. Especially, tetradymite commonly coexists with native gold. This study highlights the role of Te–Bi–S melt as an important gold scavenger in As-deficient ore-forming fluids. Full article

The Central Asian Orogenic Belt (CAOB), one of the world’s largest orogens, extending from the Ural Mountains in the west to the Russian and the Chinese Far East, is the result of long-lived multi-stage tectonic evolution, including Proterozoic to Paleozoic accretion and collision, Mesozoic intracontinental modification, and Cenozoic rapid deformation and uplift [...] Full article

As the world’s largest accretionary orogen, the Central Asian Orogenic Belt (CAOB) underwent continuous juvenile crustal growth in the Phanerozoic. The northern margin of the North China Craton (NCC) and its adjacent area form the eastern segment of the CAOB, which is a key area for learning about the geological evolution of the Paleo-Asian Ocean (PAO). In the Permian, the west of the northern margin of the NCC was a post-collision extensional environment, while the east was in a subduction stage. As a connecting area, the Permian evolution of the PAO in the middle of the northern margin of the NCC has not been systematically studied. In order to fill the gap and understand the continuous temporal and spatial evolutionary process of the PAO, this paper focuses on the Permian granitic rocks in the Chifeng area. Zircon U-Pb dating and the geochemical analysis of whole-rock major and trace elements were conducted to build a granite chronological framework, and to discuss the genesis and tectonic background of the granitic rocks, along with tectono-magmatic evolutionary history in the Chifeng area. The respective LA-ICP-MS zircon U-Pb dating results from eight samples are 269 ± 1, 268 ± 3, 260 ± 4, 260 ± 1, 260 ± 1, 255 ± 2, 254 ± 2 and 256 ± 1 Ma, respectively. These results, combined with previous data, revealed that the Permian granitic rocks had undergone three events of magmatism: (1) monzogranitic-syenitic phase (294–284 Ma; Cisuralian); (2) monzogranitic phase (269–260 Ma; Guadalupian) and (3) late monzogranitic-syenitic phase (256–254 Ma; Lopingian). From the Early Permian (294–284 Ma) to the Middle Permian (269–260 Ma), granites with fine-medium-grained locally porphyritic texture and massive structure showed a high-potassium calc-alkaline series formed in a compressional setting, indicating a continuous collision between the Xing’an-Mongolian Orogenic Belt (XMOB) and the NCC. During the Late Permian-Early Triassic (256–248 Ma), granites with massive structure and medium-grained texture in the Chifeng area were magmatism dominated by A- and I-type granites of high-potassium calc-alkaline series, combined with the coeval basic rocks, which constituted a typical “bimodal” rock assemblage. This suggests that the Chifeng area was located in an extensional setting where the subducting slab broke off during the collision between the XMOB and NCC. These granitic plutons from the Permian are believed to have been generated by the subduction-collision of the Paleo-Asian oceanic crust beneath the NCC, according to emplacement time and occurrence location. Our findings provide strong evidence for Permian continuous temporal and spatial tectonic evolution and the characterization of the eventual closure of the PAO in Chifeng area at the northern margin of the NCC. Full article

The Biche-Kadyr-Oos epithermal Au-Ag ore occurrence is a prospective object in the Ak-Sug porphyry copper ore cluster (Eastern Sayan) in the northern part of the Central Asian orogenic belt (CAOB). The mineralization consists of gold-sulfide-quartz and gold-polysulfide-carbonate-quartz veins with argillic zones in the Lower Cambrian volcanic-sedimentary rocks. The origin of the Au-Ag ore occurrence is still debatable. To determine the origin, we examined the mineralogical and geochemical features, conditions of formation, and fluid sources of the Biche-Kadyr-Oos ore. A mineralogical and geochemical investigation outlines three stages of mineral formation: early argillic stage; gold-sulfide-quartz stage with pyrite, marcasite, pyrrhotite, arsenopyrite, chalcopyrite, less frequently sphalerite, hessite, gold, and electrum; and late gold-polysulfide-carbonate-quartz stage with gold, electrum, Hg-electrum, Se-acanthite, Se-galena, bornite, tennantite, tetrahedrite, hessite, tellurobismuthite, bismuthinite, matildite, jamesonite, ourayite, native Bi, and barite. Fluid inclusion study (thermometry, Raman spectroscopy) in quartz and mineral thermometry (electrum and sphalerite paragenesis) determined that ore veins were formed at P~0.5 kbar from CO₂-water Na-K-chloride fluid (4.9–9.6 wt % NaCl eqv) and temperatures from 300 to 200 °C (early gold-sulfide-quartz veins at 300–230 °C, and late gold-polysulfide-carbonate-quartz veins at 290–200 °C) and variations in fO₂, fS₂, fSe₂ and fTe₂. The S isotopic composition in sulfides and δ³⁴SH₂S values of the fluid are +1.3‰ and +4.7‰, respectively, (T = 300–275 °C) indicating magmatic S in ore formation. The oxygen isotope data indicate that during the formation of veins, the magmatic fluid mixed with meteoric water (δ¹⁸O_fluid is from +3.4 to +6.4‰). The isotopic data that were obtained combined with mineralogical and geochemical features and conditions of ore formation indicate the similarity of Biche-Kadyr-Oos ore occurrence with epithermal Au-Ag deposits of intermediate sulfidation (IS) type. The presence of epithermal Au-Ag mineralization of the Biche-Kadyr-Oos IS type in ore cluster of the Ak-Sug Cu-Au-Mo porphyry deposit indicates the existence of a single porphyry-epithermal ore-magmatic system. Full article

Outcrops of late Paleozoic magmatic rocks are common in the Southern Beishan Orogenic Belt (SBOB), Southern Central Asian Orogenic Belt (CAOB), which is a key object for the understanding of regional tectonism and defining the final closure time of the Paleo-Asian Ocean (PAO). We present zircon U-Pb chronology and whole-rock geochemistry data for late Paleozoic granodiorites and bimodal volcanic rocks from the Shuangyingshan-Huaniushan unit in the north Huitongshan-Zhangfangshan ophiolitic belt in the SBOB. The Zhangfangshan granodiorites (LA-ICP-MS, Ca. 288 Ma) are A2-type granite enriched in Rb, Th, Pb and LREEs and depleted in Nb, Ta, Ti, Sr, Ba and HREEs. They have varying MgO and ^TFe₂O₃ contents with high Mg^# (38.56~48.97) values; the Lu/Yb ratios (0.14~0.15) of these granodiorites are similar to mantle-derived magma. A clear plagioclase zoning structure and acicular apatite occur in mineral assemblages derived from magma mixing between mafic and felsic magmas. The Baishantang bimodal volcanic rocks (272 Ma) consist of rhyolite and basaltic andesite. Baishantang rhyolites are A2-type felsic rock enriched in Rb, Th, Pb and LREEs and depleted in Nb, Ta, Ti, Sr, Ba and HREEs, with negative ε_Nd(t) and ε_Hf(t) (−5.2~−4.8 and −2.2~−1.9, respectively). Rhyolites originated from the partial melting of the crust, influenced by mantle material. Basaltic andesites belong to calc-alkaline series and have an enrichment of Rb, Ba, Th, U, Pb and LREEs, are weakly enriched in Zr-Hf, and are depleted in Nb, Ta, Ti and HREEs. The Nd-Hf isotopes of these basaltic andesites are not coupled with negative ε_Nd(t) (−2.8~−0.4) and positive ε_Hf(t) (1.8~5.5) values. These characteristics indicate that they originated from the partial melting of the mantle mixed with sediment-derived melts. In combination with previous studies, our findings show that the early Permian Zhangfangshan granodiorites and Baishantang bimodal volcanic rocks formed in a post-collision extensional setting, and the Huitongshan-Zhangfangshan ocean had been closed before early Permian. Full article

Devonian magmatism is one of the most important tectonothermal events in the Central Asian Orogenic Belt (CAOB). However, little is known regarding the petrogenesis and geodynamic setting of the widely distributed Devonian granitoids in the eastern Southern Beishan Orogenic Belt (SBOB). Early-Devonian granitic magmatism has been recognized from the Luotuoquan area, and the granites were emplaced between 404.9 Ma and 399.4 Ma according to LA-ICPMS zircon U–Pb dating. Geochemically, the granites exhibit high SiO₂ and Al₂O₃ contents and are enriched in light rare earth elements as well as Rb, Th, Nd, Zr, and Hf, while being depleted in heavy rare earth elements and Ba, U, Sr, and Ti, with distinct rare earth element fractionation and pronounced negative Eu anomalies. According to the comprehensive analysis, they closely resemble the features typically associated with A-type granites. The zircons ε_Hf(t) values are within the range of +0.90–+5.19 (averaged 3.23) for the monzogranite and syenogranite, whereas their T_DM2 values fall between 1.05 and 1.34 Ga, suggesting that the magma source of the monzogranite–syenogranite originated from the partial melting of the Mesoproterozoic crust dominated by metagreywackes. Furthermore, the monzogranite and syenogranite exhibit high temperatures (average 782 °C), thin crustal thickness (average 30 km), and A-type characteristics, suggesting their formation in post-collision extensional settings. We propose the closure of the Beishan Ocean occurred before the early Devonian, followed by a transition in the Southern Beishan Orogenic Belt from a compressional to an extensional setting. Full article