Search Results (6)

Glucosamine–chitosan synthesized by the Maillard reaction was combined with montmorillonite to obtain a nanohybrid composite to immobilize horseradish peroxidase. The material combines the advantageous properties of clay with those of the chitosan derivative; has improved water solubility and reduced molecular weight and viscosity; involves an eco-friendly synthesis; and exhibits ion exchange capacity, good adhesiveness, and a large specific surface area for enzyme adsorption. The physicochemical characteristics of the composite were analyzed by infrared spectroscopy and X-ray diffraction to determine clay–polycation interactions. The electrochemical response of the different polyphenols to glassy carbon electrodes modified with the composite was evaluated by cyclic voltammetry. The sensitivity and detection limit values obtained with the biosensor toward hydroquinone, chlorogenic acid, catechol, and resorcinol are (1.6 ± 0.2) × 10² µA mM⁻¹ and (74 ± 8) nM; (1.2 ± 0.1) × 10² µA mM⁻¹ and (26 ± 3) nM; (16 ± 2) µA mM⁻¹ and (0.74 ± 0.09) μM; and (3.7± 0.3) µA mM⁻¹ and (3.3 ± 0.2) μM, respectively. The biosensor was applied to quantify polyphenols in pennyroyal and lemon verbena extracts. Full article

Okadaic acid (OA) is one of the most potent marine biotoxins, causing diarrheal shellfish poisoning (DSP). The proliferation of microalgae that produce OA and its analogues is frequent, threatening human health and socioeconomic development. Several methods have been tested to remove this biotoxin from aquatic systems, yet none has proven enough efficacy to solve the problem. In this work, we synthesized and characterized low-cost composites and tested their efficacy for OA adsorption in saltwater. For the synthesis of the composites, the following starting materials were considered: chitosan of low and medium molecular weight (CH-LW and CH-MW, respectively), activated carbon (AC), and montmorillonite (MMT). Characterization by vibrational spectroscopy (FTIR), X-ray diffraction (XRD), and microscopy revealed differences in the mode of interaction of CH-LW and CH-MW with AC and MMT, suggesting that the interaction of CH-MW with MMT has mainly occurred on the surface of the clay particles and no sufficient intercalation of CH-MW into the MMT interlayers took place. Among the composites tested (CH-LW/AC, CH-MW/AC, CH-MW/AC/MMT, and CH-MW/MMT), CH-MW/MMT was the one that revealed lower OA adsorption efficiency, given the findings evidenced by the structural characterization. On the contrary, the CH-MW/AC composite revealed the highest average percentage of OA adsorption (53 ± 11%). Although preliminary, the results obtained in this work open up good perspectives for the use of this type of composite material as an adsorbent in the removal of OA from marine environments. Full article

Exposure to vomitoxin (DON) can negatively impact the intestinal health of livestock and poultry, leading to compromised nutrient absorption and utilization, resulting in slowed growth and reduced production efficiency. In this study, we synthesized carbonated chitosan montmorillonite intercalation complexes (CCM) through solution precipitation. The successful formation of intercalation complexes was confirmed by examining functional groups and surface features using infrared spectroscopy and scanning electron microscopy. To assess the impact of CCM on DON-infected mice, we established an experimental mouse model of jejunal inflammation induced by DON infection. We analyzed the effects of CCM on blood biochemical and conventional indices, jejunal inflammatory factors, pathological changes, and the expression of proteins in the MAPK pathways in DON-infected mice. Our results indicate that CCM effectively mitigates the adverse effects of DON on growth performance, jejunal injury, and the inflammatory response in mice. CCM supplementation alleviated the negative effects of DON infection on growth performance and reduced intestinal inflammation in mice. Moreover, CCM supplementation successfully inhibited the activation of the mitogen-activated protein kinase (MAPK) signaling pathway induced by DON. These findings suggest that the mitigating effect of CCM on DON-induced inflammatory injury in the murine jejunum is closely linked to the regulation of the MAPK signaling pathway. Full article

A simple approach for synthesizing a highly adsorbent composite was described for the uptake of heavy metal ions from wastewater. A simple approach for synthesizing a highly adsorbent composite was also described for the elimination of heavy metal ions from contaminated water. The nanocomposite was synthesized via a polymer grafting of chitosan on the activated carbon surface, followed by a stacking process with the layers of montmorillonite clay. The spectroscopic analyses were exploited to confirm the composite structure of the prepared materials. Various adsorption parameters, such as pH, initial concentration, and adsorption time, were assessed. The results showed that the adsorption capacity of the composite for Pb²⁺ ions increased as the pH increased until it reached pH 5.5. The maximum adsorption capacity was observed at an initial Pb²⁺ level of 20 mg/L and a contact time of 150 min. Kinetic models were evaluated, and the pseudo second-order model showed the best match. The adsorption isotherm data were processed by fitting the model with different isotherm behaviors, and the Langmuir isotherm was found to be the most suitable for the system. The maximum adsorption capacity for Pb²⁺ ion on the MMT/CS/AC composite was found to be 50 mg/g at pH 5.5. Furthermore, the composite maintained a high adsorption capability of 85% for five adsorption–desorption cycles. Overall, this composite is envisioned as an addition to the market of wastewater remediation technology due to its chemical structure, which provides influential functional groups for wastewater treatment. Full article

In this study, a combination of the porous carbon (PCN), montmorillonite (MMT), and TiO₂ was synthesized into a composite immobilized Pd metal catalyst (TiO₂-MMT/PCN@Pd) with effective synergism improvements in catalytic performance. The successful TiO₂-pillaring modification for MMT, derivation of carbon from the biopolymer of chitosan, and immobilization of Pd species for the prepared TiO₂-MMT/PCN@Pd⁰ nanocomposites were confirmed using a combined characterization with X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), N₂ adsorption–desorption isotherms, high-resolution transition electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. It was shown that the combination of PCN, MMT, and TiO₂ as a composite support for the stabilization of the Pd catalysts could synergistically improve the adsorption and catalytic properties. The resultant TiO₂-MMT₈₀/PCN₂₀@Pd⁰ showed a high surface area of 108.9 m²/g. Furthermore, it exhibited moderate to excellent activity (59–99% yield) and high stability (recyclable 19 times) in the liquid–solid catalytic reactions, such as the Sonogashira reactions of aryl halides (I, Br) with terminal alkynes in organic solutions. The positron annihilation lifetime spectroscopy (PALS) characterization sensitively detected the development of sub-nanoscale microdefects in the catalyst after long-term recycling service. This study provided direct evidence for the formation of some larger-sized microdefects during sequential recycling, which would act as leaching channels for loaded molecules, including active Pd species. Full article

Numerous adsorbent materials are developed and are able to face specific types of pollution, but none of them can manage the whole pollution. The purpose of this work is to develop a novel hybrid adsorbent, based on chitosan (CS) biopolymer, clay minerals and activated carbon (AC), having complementary adsorption properties and achieving a wide-spectrum water decontamination in a single treatment. Hybrid CS beads, containing dispersed clay and AC, were prepared from dispersions of solid adsorbents in a CS solution and its further coagulation in a basic medium. The porosity and the homogeneity of the hybrid beads were characterized by N₂ adsorption at 77 K and Cryo-Scanning Electron Microscopy respectively. The interaction between CS and clay was characterized using X-ray diffraction. Water content and the amount of each adsorbent in the hydrogel beads were determined by thermogravimetric analysis. Such a composite material was still porous and presented a wide adsorption spectrum. As shown by their adsorption kinetics, hydrophobic anionic clofibric acid (CBA) and cationic metoprolol (MTP) were well adsorbed on AC containing beads (21 and 26 mg/g), respectively. Clays containing beads showed interesting adsorption properties towards cationic Zn²⁺ and MTP. The obtained composite beads were able to adsorb all the pollutant types: Zinc cations, and hydrophobic-charged organic molecules, such as pharmaceutical derivatives (clofibric acid and MTP). Full article