Search Results (21)

A series of Fe–Ba mixed oxides, including a pure Fe-containing sample as a reference, have been synthesized via a sol–gel process using Fe³⁺ or Fe²⁺ salts and BaSO₄ as raw materials, with Pluronic P123 serving as a template. These oxides have been thoroughly characterized and subsequently utilized as catalysts for the chlorination of various organic molecules. Commercial hydrochloric acid, known for its relative safety, and environmentally friendly aqueous hydrogen peroxide were employed as the chlorine source and oxidant, respectively. The pure Fe-containing catalyst displays excellent thermal stability between 600 and 800 °C and exhibited moderate to high conversions in the chlorination of toluene, benzene, and tert-butyl hydroperoxide, with remarkable ortho-selectivity in chlorination of toluene. The combination of Fe³⁺ salt with BaSO₄ in the sol–gel process results in a Fe–Ba mixed oxide catalyst composed of BaO₂, BaFe₄O₇, and Fe₂O₃, significantly enhancing the chlorination activity compared to that displayed by the pure Fe catalyst. Notably, the chlorination of tert-butyl hydroperoxide (TBHP) does not require additional oxidants such as H₂O₂, and involves both electrophilic substitution and nucleophilic addition. Notably, the chlorination of bromobenzene yields chlorobenzene as the sole product, a transformation that has not been previously reported. Overall, this catalytic chlorination system holds promise for advancing the chlorination industry and enhancing pharmaceutical production. Full article

Solar-driven CO₂ conversion into high-value-added chemicals, powered by photovoltaics, is a promising technology for alleviating the global energy crisis and achieving carbon neutrality. However, most of these endeavors focus on CO₂ electroreduction to small-molecule fuels such as CO and ethanol. In this paper, inspired by the photosynthesis of green plants and artificial photosynthesis for the electroreduction of CO₂ into value-added fuel, CO₂ artificial photosynthesis for the electrocarboxylation of bromobenzene (BB) with CO₂ to generate the value-added carboxylation product methyl benzoate (MB) is demonstrated. Using two series-connected dye-sensitized photovoltaics and high-performance catalyst Ag electrodes, our artificial photosynthesis system achieves a 61.1% Faraday efficiency (FE) for carboxylation product MB and stability of the whole artificial photosynthesis for up to 4 h. In addition, this work provides a promising approach for the artificial photosynthesis of CO₂ electrocarboxylation into high-value chemicals using renewable energy sources. Full article

A synthetic pathway to a novel 4-aryl-3,4-dihydro-2H-1,4-benzoxazine scaffold was developed and a series of compounds based on the scaffold were synthesised as potential anticancer agents. The 4-aryl-substituted compounds were prepared via Buchwald–Hartwig cross-coupling between substituted bromobenzenes and various 1,4-benzoxazines, which in turn were generated from a cascade hydrogenation and reductive amination one-pot reaction. These analogues exhibited moderate to good potency against various cancer cell lines. Structure–activity relationship analysis indicated that the inclusion of hydroxyl groups on ring A and ring B was beneficial to biological activity, while having a para-amino group on ring C significantly enhanced potency. Molecule 14f displayed the most potent anticancer activity (IC₅₀ = 7.84–16.2 µM against PC-3, NHDF, MDA-MB-231, MIA PaCa-2, and U-87 MG cancer cell lines), indicating its potential as a lead compound for further structural optimisation. All the synthesised compounds were fully characterised with NMR, HMRS, and IR. The novel benzoxazine scaffold described in this study holds promise and deserves further in-depth studies. Full article

A literature survey of the P–C coupling reactions of 1,4-and 1,2-bromo-iodobenzenes with diphenylphosphine oxide or diethyl phosphite under different conditions comprising Pd-, Ni-, or Cu-catalysis revealed that, depending on the experimental details, the yields of the corresponding >P(O)-bromobenzenes were rather diverse and occasionally contradicting. Therefore, the reactivity of a series of 1,4-, 1,3- and 1,2-dibromo- and bromo-iodobenzenes with the above mentioned P-reagents was evaluated under the “P-ligand-free” microwave (MW)-assisted conditions elaborated by us. Starting from dibromobenzenes and iodo-bromoarenes, practical and competent syntheses were developed for phosphonoyl- and phosphinoyl-bromoarenes, and, in a few instances, for arenes with two P-functions. The cheaper dibromobenzenes may be substituted for the bromo-iodo derivatives. In all, 12 products were prepared in yields of 45–82%. They were fully characterized. The method described does not require the use of traditional P-ligands. Full article

We report a new structure of {[Co(bpy)₂(ox)][{Cu₂(bpy)₂(ox)}Fe(ox)₃]}_n·8.5nH₂O NCU-1 presenting a rare ladder topology among oxalate-based coordination polymers with anionic chains composed of alternately arranged [Cu₂(bpy)₂(ox)]²⁺ and [Fe(ox)₃]³⁻ moieties. Along the a axis, they are separated by Co(III) units to give porous material with voids of 963.7 ų (16.9% of cell volume). The stability of this structure is assured by a network of stacking interactions and charge-assisted C-H…O hydrogen bonds formed between adjacent chains, adjacent cobalt(III) units, and alternately arranged cobalt(III) and chain motifs. The soaking experiment with acetonitrile and bromobenzene showed that water molecules (8.5 water molecules dispersed over 15 positions) are bonded tightly, despite partial occupancy. Water adsorption experiments are described by a D’arcy and Watt model being the sum of Langmuir and Dubinin–Serpinski isotherms. The amount of primary adsorption sites calculated from this model is equal 8.2 mol H₂O/mol, being very close to the value obtained from the XRD experiments and indicates that water was adsorbed mainly on the primary sites. The antiferromagnetic properties could be only approximately described with the simple Cu^II-ox-Cu^II dimer using H = −J·S₁·S₂, thus, considering non-trivial topology of the whole Cu-Fe chain, we developed our own general approach, based on the semiclassical model (SC) and molecular field (MF) model, to describe precisely the magnetic superexchange interactions in NCU-1. We established that Cu(II)-Cu(II) coupling dominates over multiple Cu(II)-Fe(III) interactions, with J_CuCu = −275(29) and J_CuFe = −3.8(1.6) cm⁻¹ and discussed the obtained values against the literature data. Full article

Reactions of ZnSO₄∙7H₂O, N-(pyridin-3-ylmethyl)-4-(pyridin-4-yl)-1,8-naphthalimide (NI-mbpy-34), and 5-bromobenzene-1,3-dicarboxylic acid (Br-1,3-H₂bdc) afforded a luminescent coordination polymer, [Zn(Br-1,3-bdc)(NI-mbpy-34)]_n (1), under hydro(solvo)thermal conditions. Single-crystal X-ray structure analysis revealed that 1 features a three-dimensional (3-D) 2-fold interpenetrating cds (or CdSO₄) net topology with the point symbol of (6⁵·8), where the Zn(II) centers are considered as 4-connected square-planar nodes. X-ray powder diffraction (XRPD) patterns and thermogravimetric (TG) analysis confirmed that 1 shows high chemical and thermal stabilities. Notably, 1 displayed solvent dependent photoluminescence properties; the fluorescence intensity and emission maximum of 1 in different solvent suspensions varied when a solvent was changed. Furthermore, the H₂O suspension of 1 exhibited blue fluorescence emission and thus can be treated as a selective and sensitive fluorescent probe for turn-on detection of Cr³⁺ cations through absorbance caused enhancement (ACE) mechanism and turn-off detection of Cr₂O₇²⁻/CrO₄²⁻ anions through collaboration of the absorption competition and energy transfer process, with limit of detection (LOD) as low as μM scale. Full article

Two of the most hazardous benzene derivatives (HBD) that have polluted the aquatic environment are bromobenzene and chlorobenzene. Ferrate can degrade various pollutants quickly and efficiently without producing harmful byproducts. This study aims to determine the ability of ferrate to degrade harmful contaminants such as bromobenzene and chlorobenzene. A series of batch experiments were carried out, including for the molar ratio, initial pH solution, and temperature. The study was conducted at an initial pH of 3.6 to 9.6, a molar ratio of 2 to 8 and a temperature of 15 to 55 °C. The study will also examine the differences in functional groups in these pollutants. As a result of the experiments, the optimum conditions to oxidize HBD in a batch reactor was found to have an initial pH of 7.0, a molar ratio of 8, and a temperature of 45 °C, with a 10 min reaction time. Ferrate has a degradation ability against chlorobenzene greater than bromobenzene. The functional cluster in pollutants also significantly affects the degradation ability of ferrate. The results of the degradation experiment showed that ferrate(VI) could effectively oxidize hazardous benzene derivatives in a solution. Full article

Hydro(solvo)thermal reactions of Cd(NO₃)₂, N-(pyridin-3-ylmethyl)-4-(pyridin-4-yl)-1,8-naphthalimide (NI-mbpy-34), and 5-bromobenzene-1,3-dicarboxylic acid (Br-1,3-H₂bdc) afforded a luminescent coordination polymer, {[Cd(Br-1,3-bdc)(NI-mbpy-34)(H₂O)]∙2H₂O}_n (1). Single-crystal X-ray diffraction analysis showed that 1 features a two-dimensional (2-D) gridlike sql layer with the point symbol of (4⁴·6²), where the Cd(II) center adopts a {CdO₅N₂} pentagonal bipyramidal geometry. Thermogravimetric (TG) analysis confirmed the thermal stability of 1 up to about 340 °C, whereas XRPD patterns proved the maintenance of crystallinity and framework integrity of 1 in CH₂Cl₂, H₂O, CH₃OH, and toluene. Photoluminescence studies indicated that 1 displayed intense blue fluorescence emissions in both solid-state and H₂O suspension-phase. Owing to the good fluorescent properties, 1 could serve as an excellent turn-off fluorescence sensor for selective and sensitive Cr(VI) detection in water, with LOD = 15.15 μM for CrO₄²⁻ and 14.91 μM for Cr₂O₇²⁻, through energy competition absorption mechanism. In addition, 1 could also sensitively detect Cr³⁺, Fe³⁺, and Al³⁺ ions in aqueous medium via fluorescence-enhancement responses, with LOD = 2.81 μM for Cr³⁺, 3.82 μM for Fe³⁺, and 3.37 μM for Al³⁺, mainly through an absorbance-caused enhancement (ACE) mechanism. Full article

We report absolute photoabsorption cross sections for gas-phase 2- and 5-bromopyrimidine in the 3.7–10.8 eV energy range, in a joint theoretical and experimental study. The measurements were carried out using high-resolution vacuum ultraviolet synchrotron radiation, with quantum chemical calculations performed through the nuclear ensemble approach in combination with time-dependent density functional theory, along with additional Franck–Condon Herzberg–Teller calculations for the first absorption band (3.7–4.6 eV). The cross sections of both bromopyrimidines are very similar below 7.3 eV, deviating more substantially from each other at higher energies. In the 7.3–9.0 eV range where the maximum cross-section is found, a single and broad band is observed for 5-bromopyrimidine, while more discernible features appear in the case of 2-bromopyrimidine. Several π* ← π transitions account for the most intense bands, while weaker ones are assigned to transitions involving the nitrogen and bromine lone pairs, the antibonding σ*_Br orbital, and the lower-lying Rydberg states. A detailed comparison with the available photo-absorption data of bromobenzene is also reported. We have found significant differences regarding the main absorption band, which is more peaked in bromobenzene, becoming broader and shifting to higher energies in both bromopyrimidines. In addition, there is a significant suppression of vibrational structures and of Rydberg states in the pair of isomers, most noticeably for 2-bromopyrimidine. Full article

Liver disease and disorders associated with aberrant hepatocyte metabolism can be initiated via drug and environmental toxicant exposures. In this study, we tested the hypothesis that gene and metabolic profiling can reveal commonalities in liver response to different toxicants and provide the capability to identify early signatures of acute liver toxicity. We used Sprague Dawley rats and three classical hepatotoxicants: acetaminophen (2 g/kg), bromobenzene (0.4 g/kg), and carbon tetrachloride (0.3 g/kg), to identify early perturbations in liver metabolism after a single acute exposure dose. We measured changes in liver genes and plasma metabolites at two time points (5 and 10 h) and used genome-scale metabolic models to identify commonalities in liver responses across the three toxicants. We found strong correlations for gene and metabolic profiles between the toxicants, indicative of similarities in the liver response to toxicity. We identified several injury-specific pathways in lipid and amino acid metabolism that changed similarly across the three toxicants. Our findings suggest that several plasma metabolites in lipid and amino acid metabolism are strongly associated with the progression of liver toxicity, and as such, could be targeted and clinically assessed for their potential as early predictors of acute liver toxicity. Full article

Pd(II) and Pt(II) composites with activated carbon (AC), graphene oxide, and multiwalled carbon nanotubes were prepared by ball milling and used as catalysts for the Suzuki-Miyaura reaction, under several energy inputs (mechanical grinding, conventional heating, and microwave irradiation). The catalytic composites were characterized by ICP-MS, BET, XPS analyses, TEM, and SEM. The average particle size of the prepared composites was estimated to be in the range of 6–30 nm, while the loadings of Pd and Pt did not significantly affect the surface area of the AC support due to the tendency to agglomerate as observed by the TEM analysis. The Pd/AC composites exhibit high mechanochemical catalytic activity in cross-coupling of bromobenzene and phenylboronic acid with molar yields up to 80% with TON and TOF of 222 and 444 h⁻¹, respectively, achieved with Pd(4.7 wt%)-AC catalyst under the liquid assisted grinding for 0.5 h at ambient conditions, using cyclohexene as an additive. Full article

This work describes the synthesis of thiol-functionalized periodic mesoporous organosilicas (PMOs) prepared using the precursor 1-thiol-1,2-bis(triethoxysilyl)ethane, alone or mixed with 1,2-bis(triethoxysilyl)ethane. The thiol groups incorporated into the structure were found to be efficient for palladium binding. This has allowed these materials to be used as catalysts in the Suzuki cross-coupling reaction of bromobenzene and phenylboronic acid. Their performance has been compared to palladium-supported periodic mesoporous (organo)silicas and important differences have been observed between them. The use of different heterogeneity tests, such as hot filtration test and poisoning experiments, has provided a deep insight into the reaction mechanism and has confirmed that the reaction occurs in the homogeneous phase following a “release and catch” mechanism. Furthermore, the thiol-functionalized periodic mesoporous organosilica, synthesized using only 1-thiol-1,2-bis(triethoxysilyl)ethane as a precursor, has proven to be an efficient palladium scavenger. Full article

Bioassay guided isolation of the methanolic extract of marine macro brown alga Dictyopteris hoytii afforded one new metabolite (ethyl methyl 2-bromobenzene 1,4-dioate, 1), one new natural metabolite (diethyl-2-bromobenzene 1,4-dioate, 2) along with six known metabolites (3–8) reported for the first time from this source. The structure elucidation of all these compounds was achieved by extensive spectroscopic techniques including 1D (¹H and ¹³C) and 2D (NOESY, COSY, HMBC and HSQC) NMR and mass spectrometry and comparison of the spectral data of known compounds with those reported in literature. The in vitro α-glucosidase inhibition studies confirmed compound 7 to be the most active against α-glucosidase enzyme with IC₅₀ value of 30.5 ± 0.41 μM. Compounds 2 and 3 demonstrated good inhibition with IC₅₀ values of 234.2 ± 4.18 and 289.4 ± 4.91 μM, respectively, while compounds 1, 5, and 6 showed moderate to low inhibition. Furthermore, the molecular docking studies of the active compounds were performed to examine their mode of inhibition in the binding site of the α-glucosidase enzyme. Full article

Highly selective C(sp²)–C(sp²) cross-coupling of dihalogenated hydrocarbons comprising C(sp²)–Br and C(sp³)–Cl bonds with arylboronic acids is reported. This highly selective coupling reaction of the C(sp²)–Br bond is successfully achieved using Pd(OAc)₂ and PCy₃·HBF₄ as the palladium source and ligand, respectively. A series of chloromethyl-1,1′-biphenyl compounds are obtained in moderate-to-excellent yields. Moreover, this protocol can be extended to the one-pot dual arylation of 1-bromo-4-(chloromethyl)benzene with two arylboronic acids, leading to diverse unsymmetrical 4-benzyl-1,1′-biphenyl derivatives. Full article

Spatial distribution of bromobenzene (BrBz) and 4-bromophenol (BrPh) as hydrophobic aromatic compounds incorporated in polymer micelles with vesicular structure consisting of poly(ethylene glycol)-b-poly(tert-butyl methacrylate) (PEG-b-PtBMA) in aqueous solution is investigated by anomalous small-angle X-ray scattering (ASAXS) analyses near Br K edge. Small-angle X-ray scattering (SAXS) intensities from PEG-b-PtBMA micelles containing BrBz and BrPh were decreased as the energy of incident X-ray approached to Br K edge corresponding to the energy dependence of anomalous scattering factor of Br. The analysis for the energy dependence of SAXS profiles from the PEG-b-PtBMA micelles containing BrBz revealed that BrBz molecules were located in hydrophobic layer of PEG-b-PtBMA micelles. On the contrary, it was found by ASAXS that BrPh existed not only in the hydrophobic layer but also in the shell layer. Since ASAXS analysis successfully accomplished to visualize the spatial distribution of hydrophobic molecules in polymer micelles, it should be expected to be a powerful tool for characterization of drug delivery vehicles. Full article